From: Steve Longerbeam <slongerbeam@gmail.com>
To: shawnguo@kernel.org, kernel@pengutronix.de,
fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, mchehab@kernel.org,
gregkh@linuxfoundation.org, p.zabel@pengutronix.de
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
devel@driverdev.osuosl.org,
Steve Longerbeam <steve_longerbeam@mentor.com>
Subject: [PATCH v2 19/19] ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers
Date: Tue, 3 Jan 2017 12:57:29 -0800 [thread overview]
Message-ID: <1483477049-19056-20-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1483477049-19056-1-git-send-email-steve_longerbeam@mentor.com>
Enable imx v4l2 staging drivers. For video capture on
the SabreAuto, the ADV7180 video decoder also requires the
i2c-mux-gpio and the max7310 port expander. The Sabrelite
requires PWM clocks for the OV5640.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
arch/arm/configs/imx_v6_v7_defconfig | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index cbe7faf..5da4d8e 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -51,6 +51,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_CMA=y
+CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
@@ -181,6 +182,7 @@ CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOPCF=m
@@ -194,11 +196,11 @@ CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_STMPE=y
-CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_IMX=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_POWER_SUPPLY=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_THERMAL=y
@@ -221,6 +223,8 @@ CONFIG_REGULATOR_PFUZE100=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=y
CONFIG_MEDIA_USB_SUPPORT=y
@@ -229,6 +233,8 @@ CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_ADV7180=m
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
@@ -338,6 +344,8 @@ CONFIG_FSL_EDMA=y
CONFIG_IMX_SDMA=y
CONFIG_MXS_DMA=y
CONFIG_STAGING=y
+CONFIG_STAGING_MEDIA=y
+CONFIG_COMMON_CLK_PWM=y
CONFIG_IIO=y
CONFIG_VF610_ADC=y
CONFIG_MPL3115=y
--
2.7.4
next prev parent reply other threads:[~2017-01-03 20:59 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-03 20:57 [PATCH v2 00/19] i.MX Media Driver Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 01/19] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 02/19] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 03/19] ARM: dts: imx6qdl: add media device Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 04/19] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam
2017-01-04 12:25 ` Vladimir Zapolskiy
2017-01-05 19:20 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 05/19] ARM: dts: imx6-sabresd: " Steve Longerbeam
2017-01-04 12:33 ` Vladimir Zapolskiy
2017-01-05 22:30 ` Steve Longerbeam
2017-01-04 15:26 ` Fabio Estevam
2017-01-07 0:25 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 06/19] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 07/19] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 08/19] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 09/19] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Steve Longerbeam
2017-01-04 12:41 ` Vladimir Zapolskiy
2017-01-05 22:31 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 10/19] media: Add i.MX media core driver Steve Longerbeam
2017-01-04 13:33 ` Vladimir Zapolskiy
2017-01-06 1:21 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 11/19] media: imx: Add CSI subdev driver Steve Longerbeam
2017-01-04 13:44 ` Vladimir Zapolskiy
2017-01-06 18:05 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 12/19] media: imx: Add SMFC " Steve Longerbeam
2017-01-04 14:23 ` Vladimir Zapolskiy
2017-01-06 18:11 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 13/19] media: imx: Add IC subdev drivers Steve Longerbeam
2017-01-04 14:48 ` Vladimir Zapolskiy
2017-01-06 18:34 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 14/19] media: imx: Add Camera Interface subdev driver Steve Longerbeam
2017-01-04 14:55 ` Vladimir Zapolskiy
2017-01-06 18:42 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 15/19] media: imx: Add MIPI CSI-2 Receiver " Steve Longerbeam
2017-01-04 15:05 ` Vladimir Zapolskiy
2017-01-06 18:58 ` Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 16/19] media: imx: Add video switch " Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 17/19] media: imx: Add MIPI CSI-2 OV5640 sensor " Steve Longerbeam
2017-01-03 20:57 ` [PATCH v2 18/19] media: imx: Add Parallel OV5642 " Steve Longerbeam
2017-01-03 20:57 ` Steve Longerbeam [this message]
2017-01-03 21:10 ` [PATCH v2 00/19] i.MX Media Driver Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1483477049-19056-20-git-send-email-steve_longerbeam@mentor.com \
--to=slongerbeam@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=steve_longerbeam@mentor.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).