linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCHv3 0/8] Add support for STM32 RTC
@ 2017-01-05 13:43 Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 1/8] ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429 Amelie Delaunay
                   ` (7 more replies)
  0 siblings, 8 replies; 18+ messages in thread
From: Amelie Delaunay @ 2017-01-05 13:43 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel,
	Gabriel Fernandez, Amelie Delaunay

v3:
- rework set_alarm
- return platform_get_irq error code instead of -ENOENT

v2:
- remove clock-names and interrupt-names from bindings
- remove unuseful headers
- clean stm32_rtc structure
- replace stm32_rtc_readl/_writel by readl/writel_relaxed
- use threaded IRQ
- rework set_alarm
- add various comments
- select COMPILE_TEST and REGMAP_MMIO

This patchset adds support for the STM32 Real-Time Clock.
This RTC is an independent BCD timer/counter and provides a time-of-day
clock/calendar with programmable alarm interrupt.
RTC calendar can be driven by three clock sources LSE, LSI or HSE.

Amelie Delaunay (8):
  ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429
  dt-bindings: document the STM32 RTC bindings
  rtc: add STM32 RTC driver
  ARM: dts: stm32: Add RTC support for STM32F429 MCU
  ARM: dts: stm32: enable RTC on stm32f429-disco
  ARM: dts: stm32: enable RTC on stm32f469-disco
  ARM: dts: stm32: enable RTC on stm32429i-eval
  ARM: configs: stm32: Add RTC support in STM32 defconfig

 .../devicetree/bindings/rtc/st,stm32-rtc.txt       |  27 +
 arch/arm/boot/dts/stm32429i-eval.dts               |   4 +
 arch/arm/boot/dts/stm32f429-disco.dts              |   6 +
 arch/arm/boot/dts/stm32f429.dtsi                   |  16 +
 arch/arm/boot/dts/stm32f469-disco.dts              |   4 +
 arch/arm/configs/stm32_defconfig                   |   2 +
 drivers/rtc/Kconfig                                |  11 +
 drivers/rtc/Makefile                               |   1 +
 drivers/rtc/rtc-stm32.c                            | 776 +++++++++++++++++++++
 9 files changed, 847 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
 create mode 100644 drivers/rtc/rtc-stm32.c

-- 
1.9.1

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [PATCHv3 1/8] ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429
  2017-01-05 13:43 [PATCHv3 0/8] Add support for STM32 RTC Amelie Delaunay
@ 2017-01-05 13:43 ` Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 2/8] dt-bindings: document the STM32 RTC bindings Amelie Delaunay
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 18+ messages in thread
From: Amelie Delaunay @ 2017-01-05 13:43 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel,
	Gabriel Fernandez, Amelie Delaunay

This patch set HSE_RTC clock frequency to 1 MHz, as the clock supplied to
the RTC must be 1 MHz.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index b077f99..d195ccf 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -371,6 +371,8 @@
 			reg = <0x40023800 0x400>;
 			clocks = <&clk_hse>, <&clk_i2s_ckin>;
 			st,syscfg = <&pwrcfg>;
+			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+			assigned-clock-rates = <1000000>;
 		};
 
 		dma1: dma-controller@40026000 {
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCHv3 2/8] dt-bindings: document the STM32 RTC bindings
  2017-01-05 13:43 [PATCHv3 0/8] Add support for STM32 RTC Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 1/8] ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429 Amelie Delaunay
@ 2017-01-05 13:43 ` Amelie Delaunay
  2017-01-13  0:39   ` Alexandre Belloni
  2017-01-05 13:43 ` [PATCHv3 3/8] rtc: add STM32 RTC driver Amelie Delaunay
                   ` (5 subsequent siblings)
  7 siblings, 1 reply; 18+ messages in thread
From: Amelie Delaunay @ 2017-01-05 13:43 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel,
	Gabriel Fernandez, Amelie Delaunay

This patch adds documentation of device tree bindings for the STM32 RTC.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/rtc/st,stm32-rtc.txt       | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt

diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
new file mode 100644
index 0000000..e2837b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
@@ -0,0 +1,27 @@
+STM32 Real Time Clock
+
+Required properties:
+- compatible: "st,stm32-rtc".
+- reg: address range of rtc register set.
+- clocks: reference to the clock entry ck_rtc.
+- interrupt-parent: phandle for the interrupt controller.
+- interrupts: rtc alarm interrupt.
+- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
+  (RTC registers) write protection.
+
+Optional properties (to override default ck_rtc parent clock):
+- assigned-clocks: reference to the ck_rtc clock entry.
+- assigned-clock-parents: phandle of the new parent clock of ck_rtc.
+
+Example:
+
+	rtc: rtc@40002800 {
+		compatible = "st,stm32-rtc";
+		reg = <0x40002800 0x400>;
+		clocks = <&rcc 1 CLK_RTC>;
+		assigned-clocks = <&rcc 1 CLK_RTC>;
+		assigned-clock-parents = <&rcc 1 CLK_LSE>;
+		interrupt-parent = <&exti>;
+		interrupts = <17 1>;
+		st,syscfg = <&pwrcfg>;
+	};
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCHv3 3/8] rtc: add STM32 RTC driver
  2017-01-05 13:43 [PATCHv3 0/8] Add support for STM32 RTC Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 1/8] ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429 Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 2/8] dt-bindings: document the STM32 RTC bindings Amelie Delaunay
@ 2017-01-05 13:43 ` Amelie Delaunay
  2017-01-05 17:33   ` Mathieu Poirier
  2017-01-11  0:08   ` Alexandre Belloni
  2017-01-05 13:43 ` [PATCHv3 4/8] ARM: dts: stm32: Add RTC support for STM32F429 MCU Amelie Delaunay
                   ` (4 subsequent siblings)
  7 siblings, 2 replies; 18+ messages in thread
From: Amelie Delaunay @ 2017-01-05 13:43 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel,
	Gabriel Fernandez, Amelie Delaunay

This patch adds support for the STM32 RTC.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 drivers/rtc/Kconfig     |  11 +
 drivers/rtc/Makefile    |   1 +
 drivers/rtc/rtc-stm32.c | 776 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 788 insertions(+)
 create mode 100644 drivers/rtc/rtc-stm32.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e859d14..11eb28a 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1706,6 +1706,17 @@ config RTC_DRV_PIC32
 	   This driver can also be built as a module. If so, the module
 	   will be called rtc-pic32
 
+config RTC_DRV_STM32
+	tristate "STM32 RTC"
+	select REGMAP_MMIO
+	depends on ARCH_STM32 || COMPILE_TEST
+	help
+	   If you say yes here you get support for the STM32 On-Chip
+	   Real Time Clock.
+
+	   This driver can also be built as a module, if so, the module
+	   will be called "rtc-stm32".
+
 comment "HID Sensor RTC drivers"
 
 config RTC_DRV_HID_SENSOR_TIME
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 1ac694a..87bd9cc 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -144,6 +144,7 @@ obj-$(CONFIG_RTC_DRV_SNVS)	+= rtc-snvs.o
 obj-$(CONFIG_RTC_DRV_SPEAR)	+= rtc-spear.o
 obj-$(CONFIG_RTC_DRV_STARFIRE)	+= rtc-starfire.o
 obj-$(CONFIG_RTC_DRV_STK17TA8)	+= rtc-stk17ta8.o
+obj-$(CONFIG_RTC_DRV_STM32) 	+= rtc-stm32.o
 obj-$(CONFIG_RTC_DRV_STMP)	+= rtc-stmp3xxx.o
 obj-$(CONFIG_RTC_DRV_ST_LPC)	+= rtc-st-lpc.o
 obj-$(CONFIG_RTC_DRV_SUN4V)	+= rtc-sun4v.o
diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
new file mode 100644
index 0000000..fdd3a31
--- /dev/null
+++ b/drivers/rtc/rtc-stm32.c
@@ -0,0 +1,776 @@
+/*
+ * Copyright (C) Amelie Delaunay 2016
+ * Author:  Amelie Delaunay <amelie.delaunay@st.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/bcd.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/ioport.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/spinlock.h>
+
+#define DRIVER_NAME "stm32_rtc"
+
+/* STM32 RTC registers */
+#define STM32_RTC_TR		0x00
+#define STM32_RTC_DR		0x04
+#define STM32_RTC_CR		0x08
+#define STM32_RTC_ISR		0x0C
+#define STM32_RTC_PRER		0x10
+#define STM32_RTC_ALRMAR	0x1C
+#define STM32_RTC_WPR		0x24
+
+/* STM32_RTC_TR bit fields  */
+#define STM32_RTC_TR_SEC_SHIFT		0
+#define STM32_RTC_TR_SEC		GENMASK(6, 0)
+#define STM32_RTC_TR_MIN_SHIFT		8
+#define STM32_RTC_TR_MIN		GENMASK(14, 8)
+#define STM32_RTC_TR_HOUR_SHIFT		16
+#define STM32_RTC_TR_HOUR		GENMASK(21, 16)
+
+/* STM32_RTC_DR bit fields */
+#define STM32_RTC_DR_DATE_SHIFT		0
+#define STM32_RTC_DR_DATE		GENMASK(5, 0)
+#define STM32_RTC_DR_MONTH_SHIFT	8
+#define STM32_RTC_DR_MONTH		GENMASK(12, 8)
+#define STM32_RTC_DR_WDAY_SHIFT		13
+#define STM32_RTC_DR_WDAY		GENMASK(15, 13)
+#define STM32_RTC_DR_YEAR_SHIFT		16
+#define STM32_RTC_DR_YEAR		GENMASK(23, 16)
+
+/* STM32_RTC_CR bit fields */
+#define STM32_RTC_CR_FMT		BIT(6)
+#define STM32_RTC_CR_ALRAE		BIT(8)
+#define STM32_RTC_CR_ALRAIE		BIT(12)
+
+/* STM32_RTC_ISR bit fields */
+#define STM32_RTC_ISR_ALRAWF		BIT(0)
+#define STM32_RTC_ISR_INITS		BIT(4)
+#define STM32_RTC_ISR_RSF		BIT(5)
+#define STM32_RTC_ISR_INITF		BIT(6)
+#define STM32_RTC_ISR_INIT		BIT(7)
+#define STM32_RTC_ISR_ALRAF		BIT(8)
+
+/* STM32_RTC_PRER bit fields */
+#define STM32_RTC_PRER_PRED_S_SHIFT	0
+#define STM32_RTC_PRER_PRED_S		GENMASK(14, 0)
+#define STM32_RTC_PRER_PRED_A_SHIFT	16
+#define STM32_RTC_PRER_PRED_A		GENMASK(22, 16)
+
+/* STM32_RTC_ALRMAR and STM32_RTC_ALRMBR bit fields */
+#define STM32_RTC_ALRMXR_SEC_SHIFT	0
+#define STM32_RTC_ALRMXR_SEC		GENMASK(6, 0)
+#define STM32_RTC_ALRMXR_SEC_MASK	BIT(7)
+#define STM32_RTC_ALRMXR_MIN_SHIFT	8
+#define STM32_RTC_ALRMXR_MIN		GENMASK(14, 8)
+#define STM32_RTC_ALRMXR_MIN_MASK	BIT(15)
+#define STM32_RTC_ALRMXR_HOUR_SHIFT	16
+#define STM32_RTC_ALRMXR_HOUR		GENMASK(21, 16)
+#define STM32_RTC_ALRMXR_PM		BIT(22)
+#define STM32_RTC_ALRMXR_HOUR_MASK	BIT(23)
+#define STM32_RTC_ALRMXR_DATE_SHIFT	24
+#define STM32_RTC_ALRMXR_DATE		GENMASK(29, 24)
+#define STM32_RTC_ALRMXR_WDSEL		BIT(30)
+#define STM32_RTC_ALRMXR_WDAY_SHIFT	24
+#define STM32_RTC_ALRMXR_WDAY		GENMASK(27, 24)
+#define STM32_RTC_ALRMXR_DATE_MASK	BIT(31)
+
+/* STM32_RTC_WPR key constants */
+#define RTC_WPR_1ST_KEY			0xCA
+#define RTC_WPR_2ND_KEY			0x53
+#define RTC_WPR_WRONG_KEY		0xFF
+
+/*
+ * RTC registers are protected agains parasitic write access.
+ * PWR_CR_DBP bit must be set to enable write access to RTC registers.
+ */
+/* STM32_PWR_CR */
+#define PWR_CR				0x00
+/* STM32_PWR_CR bit field */
+#define PWR_CR_DBP			BIT(8)
+
+static struct regmap *dbp;
+
+struct stm32_rtc {
+	struct rtc_device *rtc_dev;
+	void __iomem *base;
+	struct clk *ck_rtc;
+	spinlock_t lock; /* Protects registers accesses */
+	int irq_alarm;
+};
+
+static void stm32_rtc_wpr_unlock(struct stm32_rtc *rtc)
+{
+	writel_relaxed(RTC_WPR_1ST_KEY, rtc->base + STM32_RTC_WPR);
+	writel_relaxed(RTC_WPR_2ND_KEY, rtc->base + STM32_RTC_WPR);
+}
+
+static void stm32_rtc_wpr_lock(struct stm32_rtc *rtc)
+{
+	writel_relaxed(RTC_WPR_WRONG_KEY, rtc->base + STM32_RTC_WPR);
+}
+
+static int stm32_rtc_enter_init_mode(struct stm32_rtc *rtc)
+{
+	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+
+	if (!(isr & STM32_RTC_ISR_INITF)) {
+		isr |= STM32_RTC_ISR_INIT;
+		writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
+
+		/*
+		 * It takes around 2 ck_rtc clock cycles to enter in
+		 * initialization phase mode (and have INITF flag set). As
+		 * slowest ck_rtc frequency may be 32kHz and highest should be
+		 * 1MHz, we poll every 10 us with a timeout of 100ms.
+		 */
+		return readl_relaxed_poll_timeout_atomic(
+					rtc->base + STM32_RTC_ISR,
+					isr, (isr & STM32_RTC_ISR_INITF),
+					10, 100000);
+	}
+
+	return 0;
+}
+
+static void stm32_rtc_exit_init_mode(struct stm32_rtc *rtc)
+{
+	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+
+	isr &= ~STM32_RTC_ISR_INIT;
+	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
+}
+
+static int stm32_rtc_wait_sync(struct stm32_rtc *rtc)
+{
+	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+
+	isr &= ~STM32_RTC_ISR_RSF;
+	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
+
+	/*
+	 * Wait for RSF to be set to ensure the calendar registers are
+	 * synchronised, it takes around 2 ck_rtc clock cycles
+	 */
+	return readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
+						 isr,
+						 (isr & STM32_RTC_ISR_RSF),
+						 10, 100000);
+}
+
+static irqreturn_t stm32_rtc_alarm_irq(int irq, void *dev_id)
+{
+	struct stm32_rtc *rtc = (struct stm32_rtc *)dev_id;
+	unsigned int isr, cr;
+
+	mutex_lock(&rtc->rtc_dev->ops_lock);
+
+	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+
+	if ((isr & STM32_RTC_ISR_ALRAF) &&
+	    (cr & STM32_RTC_CR_ALRAIE)) {
+		/* Alarm A flag - Alarm interrupt */
+		dev_dbg(&rtc->rtc_dev->dev, "Alarm occurred\n");
+
+		/* Pass event to the kernel */
+		rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+		/* Clear event flag, otherwise new events won't be received */
+		writel_relaxed(isr & ~STM32_RTC_ISR_ALRAF,
+			       rtc->base + STM32_RTC_ISR);
+	}
+
+	mutex_unlock(&rtc->rtc_dev->ops_lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Convert rtc_time structure from bin to bcd format */
+static void tm2bcd(struct rtc_time *tm)
+{
+	tm->tm_sec = bin2bcd(tm->tm_sec);
+	tm->tm_min = bin2bcd(tm->tm_min);
+	tm->tm_hour = bin2bcd(tm->tm_hour);
+
+	tm->tm_mday = bin2bcd(tm->tm_mday);
+	tm->tm_mon = bin2bcd(tm->tm_mon + 1);
+	tm->tm_year = bin2bcd(tm->tm_year - 100);
+	/*
+	 * Number of days since Sunday
+	 * - on kernel side, 0=Sunday...6=Saturday
+	 * - on rtc side, 0=invalid,1=Monday...7=Sunday
+	 */
+	tm->tm_wday = (!tm->tm_wday) ? 7 : tm->tm_wday;
+}
+
+/* Convert rtc_time structure from bcd to bin format */
+static void bcd2tm(struct rtc_time *tm)
+{
+	tm->tm_sec = bcd2bin(tm->tm_sec);
+	tm->tm_min = bcd2bin(tm->tm_min);
+	tm->tm_hour = bcd2bin(tm->tm_hour);
+
+	tm->tm_mday = bcd2bin(tm->tm_mday);
+	tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
+	tm->tm_year = bcd2bin(tm->tm_year) + 100;
+	/*
+	 * Number of days since Sunday
+	 * - on kernel side, 0=Sunday...6=Saturday
+	 * - on rtc side, 0=invalid,1=Monday...7=Sunday
+	 */
+	tm->tm_wday %= 7;
+}
+
+static int stm32_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int tr, dr;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&rtc->lock, irqflags);
+
+	/* Time and Date in BCD format */
+	tr = readl_relaxed(rtc->base + STM32_RTC_TR);
+	dr = readl_relaxed(rtc->base + STM32_RTC_DR);
+
+	spin_unlock_irqrestore(&rtc->lock, irqflags);
+
+	tm->tm_sec = (tr & STM32_RTC_TR_SEC) >> STM32_RTC_TR_SEC_SHIFT;
+	tm->tm_min = (tr & STM32_RTC_TR_MIN) >> STM32_RTC_TR_MIN_SHIFT;
+	tm->tm_hour = (tr & STM32_RTC_TR_HOUR) >> STM32_RTC_TR_HOUR_SHIFT;
+
+	tm->tm_mday = (dr & STM32_RTC_DR_DATE) >> STM32_RTC_DR_DATE_SHIFT;
+	tm->tm_mon = (dr & STM32_RTC_DR_MONTH) >> STM32_RTC_DR_MONTH_SHIFT;
+	tm->tm_year = (dr & STM32_RTC_DR_YEAR) >> STM32_RTC_DR_YEAR_SHIFT;
+	tm->tm_wday = (dr & STM32_RTC_DR_WDAY) >> STM32_RTC_DR_WDAY_SHIFT;
+
+	/* We don't report tm_yday and tm_isdst */
+
+	bcd2tm(tm);
+
+	if (rtc_valid_tm(tm) < 0) {
+		dev_err(dev, "%s: rtc_time is not valid.\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int stm32_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	unsigned int tr, dr;
+	unsigned long irqflags;
+	int ret = 0;
+
+	if (rtc_valid_tm(tm) < 0) {
+		dev_err(dev, "%s: rtc_time is not valid.\n", __func__);
+		return -EINVAL;
+	}
+
+	tm2bcd(tm);
+
+	/* Time in BCD format */
+	tr = ((tm->tm_sec << STM32_RTC_TR_SEC_SHIFT) & STM32_RTC_TR_SEC) |
+	     ((tm->tm_min << STM32_RTC_TR_MIN_SHIFT) & STM32_RTC_TR_MIN) |
+	     ((tm->tm_hour << STM32_RTC_TR_HOUR_SHIFT) & STM32_RTC_TR_HOUR);
+
+	/* Date in BCD format */
+	dr = ((tm->tm_mday << STM32_RTC_DR_DATE_SHIFT) & STM32_RTC_DR_DATE) |
+	     ((tm->tm_mon << STM32_RTC_DR_MONTH_SHIFT) & STM32_RTC_DR_MONTH) |
+	     ((tm->tm_year << STM32_RTC_DR_YEAR_SHIFT) & STM32_RTC_DR_YEAR) |
+	     ((tm->tm_wday << STM32_RTC_DR_WDAY_SHIFT) & STM32_RTC_DR_WDAY);
+
+	spin_lock_irqsave(&rtc->lock, irqflags);
+
+	stm32_rtc_wpr_unlock(rtc);
+
+	ret = stm32_rtc_enter_init_mode(rtc);
+	if (ret) {
+		dev_err(dev, "Can't enter in init mode. Set time aborted.\n");
+		goto end;
+	}
+
+	writel_relaxed(tr, rtc->base + STM32_RTC_TR);
+	writel_relaxed(dr, rtc->base + STM32_RTC_DR);
+
+	stm32_rtc_exit_init_mode(rtc);
+
+	ret = stm32_rtc_wait_sync(rtc);
+end:
+	stm32_rtc_wpr_lock(rtc);
+
+	spin_unlock_irqrestore(&rtc->lock, irqflags);
+
+	return ret;
+}
+
+static int stm32_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	unsigned int alrmar, cr, isr;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&rtc->lock, irqflags);
+
+	alrmar = readl_relaxed(rtc->base + STM32_RTC_ALRMAR);
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+
+	spin_unlock_irqrestore(&rtc->lock, irqflags);
+
+	if (alrmar & STM32_RTC_ALRMXR_DATE_MASK) {
+		/*
+		 * Date/day doesn't matter in Alarm comparison so alarm
+		 * triggers every day
+		 */
+		tm->tm_mday = -1;
+		tm->tm_wday = -1;
+	} else {
+		if (alrmar & STM32_RTC_ALRMXR_WDSEL) {
+			/* Alarm is set to a day of week */
+			tm->tm_mday = -1;
+			tm->tm_wday = (alrmar & STM32_RTC_ALRMXR_WDAY) >>
+				      STM32_RTC_ALRMXR_WDAY_SHIFT;
+			tm->tm_wday %= 7;
+		} else {
+			/* Alarm is set to a day of month */
+			tm->tm_wday = -1;
+			tm->tm_mday = (alrmar & STM32_RTC_ALRMXR_DATE) >>
+				       STM32_RTC_ALRMXR_DATE_SHIFT;
+		}
+	}
+
+	if (alrmar & STM32_RTC_ALRMXR_HOUR_MASK) {
+		/* Hours don't matter in Alarm comparison */
+		tm->tm_hour = -1;
+	} else {
+		tm->tm_hour = (alrmar & STM32_RTC_ALRMXR_HOUR) >>
+			       STM32_RTC_ALRMXR_HOUR_SHIFT;
+		if (alrmar & STM32_RTC_ALRMXR_PM)
+			tm->tm_hour += 12;
+	}
+
+	if (alrmar & STM32_RTC_ALRMXR_MIN_MASK) {
+		/* Minutes don't matter in Alarm comparison */
+		tm->tm_min = -1;
+	} else {
+		tm->tm_min = (alrmar & STM32_RTC_ALRMXR_MIN) >>
+			      STM32_RTC_ALRMXR_MIN_SHIFT;
+	}
+
+	if (alrmar & STM32_RTC_ALRMXR_SEC_MASK) {
+		/* Seconds don't matter in Alarm comparison */
+		tm->tm_sec = -1;
+	} else {
+		tm->tm_sec = (alrmar & STM32_RTC_ALRMXR_SEC) >>
+			      STM32_RTC_ALRMXR_SEC_SHIFT;
+	}
+
+	bcd2tm(tm);
+
+	alrm->enabled = (cr & STM32_RTC_CR_ALRAE) ? 1 : 0;
+	alrm->pending = (isr & STM32_RTC_ISR_ALRAF) ? 1 : 0;
+
+	return 0;
+}
+
+static int stm32_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long irqflags;
+	unsigned int isr, cr;
+
+	spin_lock_irqsave(&rtc->lock, irqflags);
+
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+
+	stm32_rtc_wpr_unlock(rtc);
+
+	/* We expose Alarm A to the kernel */
+	if (enabled)
+		cr |= (STM32_RTC_CR_ALRAIE | STM32_RTC_CR_ALRAE);
+	else
+		cr &= ~(STM32_RTC_CR_ALRAIE | STM32_RTC_CR_ALRAE);
+	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
+
+	/* Clear event irqflags, otherwise new events won't be received */
+	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
+	isr &= ~STM32_RTC_ISR_ALRAF;
+	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
+
+	stm32_rtc_wpr_lock(rtc);
+
+	spin_unlock_irqrestore(&rtc->lock, irqflags);
+
+	return 0;
+}
+
+static int stm32_rtc_valid_alrm(struct stm32_rtc *rtc, struct rtc_time *tm)
+{
+	unsigned int cur_day, cur_mon, cur_year, cur_hour, cur_min, cur_sec;
+	unsigned int dr = readl_relaxed(rtc->base + STM32_RTC_DR);
+	unsigned int tr = readl_relaxed(rtc->base + STM32_RTC_TR);
+
+	cur_day = (dr & STM32_RTC_DR_DATE) >> STM32_RTC_DR_DATE_SHIFT;
+	cur_mon = (dr & STM32_RTC_DR_MONTH) >> STM32_RTC_DR_MONTH_SHIFT;
+	cur_year = (dr & STM32_RTC_DR_YEAR) >> STM32_RTC_DR_YEAR_SHIFT;
+	cur_sec = (tr & STM32_RTC_TR_SEC) >> STM32_RTC_TR_SEC_SHIFT;
+	cur_min = (tr & STM32_RTC_TR_MIN) >> STM32_RTC_TR_MIN_SHIFT;
+	cur_hour = (tr & STM32_RTC_TR_HOUR) >> STM32_RTC_TR_HOUR_SHIFT;
+
+	/*
+	 * Assuming current date is M-D-Y H:M:S.
+	 * RTC alarm can't be set on a specific month and year.
+	 * So the valid alarm range is:
+	 *	M-D-Y H:M:S < alarm <= (M+1)-D-Y H:M:S
+	 * with a specific case for December...
+	 */
+	if ((((tm->tm_year > cur_year) &&
+	      (tm->tm_mon == 0x1) && (cur_mon == 0x12)) ||
+	     ((tm->tm_year == cur_year) &&
+	      (tm->tm_mon <= cur_mon + 1))) &&
+	    ((tm->tm_mday < cur_day) ||
+	     ((tm->tm_mday == cur_day) &&
+	     ((tm->tm_hour < cur_hour) ||
+	      ((tm->tm_hour == cur_hour) && (tm->tm_min < cur_min)) ||
+	      ((tm->tm_hour == cur_hour) && (tm->tm_min == cur_min) &&
+	       (tm->tm_sec <= cur_sec))))))
+		return 0;
+
+	return -EINVAL;
+}
+
+static int stm32_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	struct rtc_time *tm = &alrm->time;
+	unsigned long irqflags;
+	unsigned int cr, isr, alrmar;
+	int ret = 0;
+
+	if (rtc_valid_tm(tm)) {
+		dev_err(dev, "Alarm time not valid.\n");
+		return -EINVAL;
+	}
+
+	tm2bcd(tm);
+
+	/*
+	 * RTC alarm can't be set on a specific date, unless this date is
+	 * up to the same day of month next month.
+	 */
+	if (stm32_rtc_valid_alrm(rtc, tm) < 0) {
+		dev_err(dev, "Alarm can be set only on upcoming month.\n");
+		return -EINVAL;
+	}
+
+	alrmar = 0;
+	/* tm_year and tm_mon are not used because not supported by RTC */
+	alrmar |= (tm->tm_mday << STM32_RTC_ALRMXR_DATE_SHIFT) &
+		  STM32_RTC_ALRMXR_DATE;
+	/* 24-hour format */
+	alrmar &= ~STM32_RTC_ALRMXR_PM;
+	alrmar |= (tm->tm_hour << STM32_RTC_ALRMXR_HOUR_SHIFT) &
+		  STM32_RTC_ALRMXR_HOUR;
+	alrmar |= (tm->tm_min << STM32_RTC_ALRMXR_MIN_SHIFT) &
+		  STM32_RTC_ALRMXR_MIN;
+	alrmar |= (tm->tm_sec << STM32_RTC_ALRMXR_SEC_SHIFT) &
+		  STM32_RTC_ALRMXR_SEC;
+
+	spin_lock_irqsave(&rtc->lock, irqflags);
+
+	stm32_rtc_wpr_unlock(rtc);
+
+	/* Disable Alarm */
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+	cr &= ~STM32_RTC_CR_ALRAE;
+	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
+
+	/*
+	 * Poll Alarm write flag to be sure that Alarm update is allowed: it
+	 * takes around 2 ck_rtc clock cycles
+	 */
+	ret = readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
+						isr,
+						(isr & STM32_RTC_ISR_ALRAWF),
+						10, 100000);
+
+	if (ret) {
+		dev_err(dev, "Alarm update not allowed\n");
+		goto end;
+	}
+
+	/* Write to Alarm register */
+	writel_relaxed(alrmar, rtc->base + STM32_RTC_ALRMAR);
+
+	if (alrm->enabled)
+		stm32_rtc_alarm_irq_enable(dev, 1);
+	else
+		stm32_rtc_alarm_irq_enable(dev, 0);
+
+end:
+	stm32_rtc_wpr_lock(rtc);
+
+	spin_unlock_irqrestore(&rtc->lock, irqflags);
+
+	return ret;
+}
+
+static const struct rtc_class_ops stm32_rtc_ops = {
+	.read_time	= stm32_rtc_read_time,
+	.set_time	= stm32_rtc_set_time,
+	.read_alarm	= stm32_rtc_read_alarm,
+	.set_alarm	= stm32_rtc_set_alarm,
+	.alarm_irq_enable = stm32_rtc_alarm_irq_enable,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id stm32_rtc_of_match[] = {
+	{ .compatible = "st,stm32-rtc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, stm32_rtc_of_match);
+#endif
+
+static int stm32_rtc_init(struct platform_device *pdev,
+			  struct stm32_rtc *rtc)
+{
+	unsigned int prer, pred_a, pred_s, pred_a_max, pred_s_max, cr;
+	unsigned int rate;
+	unsigned long irqflags;
+	int ret = 0;
+
+	rate = clk_get_rate(rtc->ck_rtc);
+
+	/* Find prediv_a and prediv_s to obtain the 1Hz calendar clock */
+	pred_a_max = STM32_RTC_PRER_PRED_A >> STM32_RTC_PRER_PRED_A_SHIFT;
+	pred_s_max = STM32_RTC_PRER_PRED_S >> STM32_RTC_PRER_PRED_S_SHIFT;
+
+	for (pred_a = pred_a_max; pred_a >= 0; pred_a--) {
+		pred_s = (rate / (pred_a + 1)) - 1;
+
+		if (((pred_s + 1) * (pred_a + 1)) == rate)
+			break;
+	}
+
+	/*
+	 * Can't find a 1Hz, so give priority to RTC power consumption
+	 * by choosing the higher possible value for prediv_a
+	 */
+	if ((pred_s > pred_s_max) || (pred_a > pred_a_max)) {
+		pred_a = pred_a_max;
+		pred_s = (rate / (pred_a + 1)) - 1;
+
+		dev_warn(&pdev->dev, "ck_rtc is %s\n",
+			 (rate - ((pred_a + 1) * (pred_s + 1)) < 0) ?
+			 "fast" : "slow");
+	}
+
+	spin_lock_irqsave(&rtc->lock, irqflags);
+
+	stm32_rtc_wpr_unlock(rtc);
+
+	ret = stm32_rtc_enter_init_mode(rtc);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Can't enter in init mode. Prescaler config failed.\n");
+		goto end;
+	}
+
+	prer = (pred_s << STM32_RTC_PRER_PRED_S_SHIFT) & STM32_RTC_PRER_PRED_S;
+	writel_relaxed(prer, rtc->base + STM32_RTC_PRER);
+	prer |= (pred_a << STM32_RTC_PRER_PRED_A_SHIFT) & STM32_RTC_PRER_PRED_A;
+	writel_relaxed(prer, rtc->base + STM32_RTC_PRER);
+
+	/* Force 24h time format */
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+	cr &= ~STM32_RTC_CR_FMT;
+	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
+
+	stm32_rtc_exit_init_mode(rtc);
+
+	ret = stm32_rtc_wait_sync(rtc);
+end:
+	stm32_rtc_wpr_lock(rtc);
+
+	spin_unlock_irqrestore(&rtc->lock, irqflags);
+
+	return ret;
+}
+
+static int stm32_rtc_probe(struct platform_device *pdev)
+{
+	struct stm32_rtc *rtc;
+	struct resource *res;
+	int ret;
+
+	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rtc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rtc->base))
+		return PTR_ERR(rtc->base);
+
+	dbp = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "st,syscfg");
+	if (IS_ERR(dbp)) {
+		dev_err(&pdev->dev, "no st,syscfg\n");
+		return PTR_ERR(dbp);
+	}
+
+	spin_lock_init(&rtc->lock);
+
+	rtc->ck_rtc = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(rtc->ck_rtc)) {
+		dev_err(&pdev->dev, "no ck_rtc clock");
+		return PTR_ERR(rtc->ck_rtc);
+	}
+
+	ret = clk_prepare_enable(rtc->ck_rtc);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, PWR_CR_DBP);
+
+	/*
+	 * After a system reset, RTC_ISR.INITS flag can be read to check if
+	 * the calendar has been initalized or not. INITS flag is reset by a
+	 * power-on reset (no vbat, no power-supply). It is not reset if
+	 * ck_rtc parent clock has changed (so RTC prescalers need to be
+	 * changed). That's why we cannot rely on this flag to know if RTC
+	 * init has to be done.
+	 */
+	ret = stm32_rtc_init(pdev, rtc);
+	if (ret)
+		goto err;
+
+	rtc->irq_alarm = platform_get_irq(pdev, 0);
+	if (rtc->irq_alarm <= 0) {
+		dev_err(&pdev->dev, "no alarm irq\n");
+		ret = rtc->irq_alarm;
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, rtc);
+
+	ret = device_init_wakeup(&pdev->dev, true);
+	if (ret)
+		dev_warn(&pdev->dev,
+			 "alarm won't be able to wake up the system");
+
+	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
+			&stm32_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc->rtc_dev)) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		dev_err(&pdev->dev, "rtc device registration failed, err=%d\n",
+			ret);
+		goto err;
+	}
+
+	/* Handle RTC alarm interrupts */
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq_alarm, NULL,
+					stm32_rtc_alarm_irq,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					pdev->name, rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "IRQ%d (alarm interrupt) already claimed\n",
+			rtc->irq_alarm);
+		goto err;
+	}
+
+	/*
+	 * If INITS flag is reset (calendar year field set to 0x00), calendar
+	 * must be initialized
+	 */
+	if (!(readl_relaxed(rtc->base + STM32_RTC_ISR) & STM32_RTC_ISR_INITS))
+		dev_warn(&pdev->dev, "Date/Time must be initialized\n");
+
+	return 0;
+err:
+	clk_disable_unprepare(rtc->ck_rtc);
+
+	regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, ~PWR_CR_DBP);
+
+	device_init_wakeup(&pdev->dev, false);
+
+	return ret;
+}
+
+static int __exit stm32_rtc_remove(struct platform_device *pdev)
+{
+	struct stm32_rtc *rtc = platform_get_drvdata(pdev);
+	unsigned int cr;
+
+	/* Disable interrupts */
+	stm32_rtc_wpr_unlock(rtc);
+	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
+	cr &= ~STM32_RTC_CR_ALRAIE;
+	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
+	stm32_rtc_wpr_lock(rtc);
+
+	clk_disable_unprepare(rtc->ck_rtc);
+
+	/* Enable backup domain write protection */
+	regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, ~PWR_CR_DBP);
+
+	device_init_wakeup(&pdev->dev, false);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stm32_rtc_suspend(struct device *dev)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		return enable_irq_wake(rtc->irq_alarm);
+
+	return 0;
+}
+
+static int stm32_rtc_resume(struct device *dev)
+{
+	struct stm32_rtc *rtc = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = stm32_rtc_wait_sync(rtc);
+	if (ret < 0)
+		return ret;
+
+	if (device_may_wakeup(dev))
+		return disable_irq_wake(rtc->irq_alarm);
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stm32_rtc_pm_ops,
+			 stm32_rtc_suspend, stm32_rtc_resume);
+
+static struct platform_driver stm32_rtc_driver = {
+	.probe		= stm32_rtc_probe,
+	.remove		= stm32_rtc_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.pm	= &stm32_rtc_pm_ops,
+		.of_match_table = stm32_rtc_of_match,
+	},
+};
+
+module_platform_driver(stm32_rtc_driver);
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 Real Time Clock driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCHv3 4/8] ARM: dts: stm32: Add RTC support for STM32F429 MCU
  2017-01-05 13:43 [PATCHv3 0/8] Add support for STM32 RTC Amelie Delaunay
                   ` (2 preceding siblings ...)
  2017-01-05 13:43 ` [PATCHv3 3/8] rtc: add STM32 RTC driver Amelie Delaunay
@ 2017-01-05 13:43 ` Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 5/8] ARM: dts: stm32: enable RTC on stm32f429-disco Amelie Delaunay
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 18+ messages in thread
From: Amelie Delaunay @ 2017-01-05 13:43 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel,
	Gabriel Fernandez, Amelie Delaunay

This patch adds STM32 RTC bindings for STM32F429.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index d195ccf..d181025 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -125,6 +125,20 @@
 			status = "disabled";
 		};
 
+		rtc: rtc@40002800 {
+			compatible = "st,stm32-rtc";
+			reg = <0x40002800 0x400>;
+			clocks = <&rcc 1 CLK_RTC>;
+			clock-names = "ck_rtc";
+			assigned-clocks = <&rcc 1 CLK_RTC>;
+			assigned-clock-parents = <&rcc 1 CLK_LSE>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 1>;
+			interrupt-names = "alarm";
+			st,syscfg = <&pwrcfg>;
+			status = "disabled";
+		};
+
 		usart2: serial@40004400 {
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40004400 0x400>;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCHv3 5/8] ARM: dts: stm32: enable RTC on stm32f429-disco
  2017-01-05 13:43 [PATCHv3 0/8] Add support for STM32 RTC Amelie Delaunay
                   ` (3 preceding siblings ...)
  2017-01-05 13:43 ` [PATCHv3 4/8] ARM: dts: stm32: Add RTC support for STM32F429 MCU Amelie Delaunay
@ 2017-01-05 13:43 ` Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 6/8] ARM: dts: stm32: enable RTC on stm32f469-disco Amelie Delaunay
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 18+ messages in thread
From: Amelie Delaunay @ 2017-01-05 13:43 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel,
	Gabriel Fernandez, Amelie Delaunay

This patch enables RTC on stm32f429-disco with LSI as clock source because
X2 crystal for LSE is not fitted by default.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 arch/arm/boot/dts/stm32f429-disco.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index b6e63d8..49eddf6 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -94,6 +94,12 @@
 	clock-frequency = <8000000>;
 };
 
+&rtc {
+	assigned-clocks = <&rcc 1 CLK_RTC>;
+	assigned-clock-parents = <&rcc 1 CLK_LSI>;
+	status = "okay";
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCHv3 6/8] ARM: dts: stm32: enable RTC on stm32f469-disco
  2017-01-05 13:43 [PATCHv3 0/8] Add support for STM32 RTC Amelie Delaunay
                   ` (4 preceding siblings ...)
  2017-01-05 13:43 ` [PATCHv3 5/8] ARM: dts: stm32: enable RTC on stm32f429-disco Amelie Delaunay
@ 2017-01-05 13:43 ` Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 7/8] ARM: dts: stm32: enable RTC on stm32429i-eval Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 8/8] ARM: configs: stm32: Add RTC support in STM32 defconfig Amelie Delaunay
  7 siblings, 0 replies; 18+ messages in thread
From: Amelie Delaunay @ 2017-01-05 13:43 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel,
	Gabriel Fernandez, Amelie Delaunay

This patch enables RTC on stm32f469-disco with default LSE clock source.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 arch/arm/boot/dts/stm32f469-disco.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 8a163d7..af57dd5 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -78,6 +78,10 @@
 	clock-frequency = <8000000>;
 };
 
+&rtc {
+	status = "okay";
+};
+
 &usart3 {
 	status = "okay";
 };
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCHv3 7/8] ARM: dts: stm32: enable RTC on stm32429i-eval
  2017-01-05 13:43 [PATCHv3 0/8] Add support for STM32 RTC Amelie Delaunay
                   ` (5 preceding siblings ...)
  2017-01-05 13:43 ` [PATCHv3 6/8] ARM: dts: stm32: enable RTC on stm32f469-disco Amelie Delaunay
@ 2017-01-05 13:43 ` Amelie Delaunay
  2017-01-05 13:43 ` [PATCHv3 8/8] ARM: configs: stm32: Add RTC support in STM32 defconfig Amelie Delaunay
  7 siblings, 0 replies; 18+ messages in thread
From: Amelie Delaunay @ 2017-01-05 13:43 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel,
	Gabriel Fernandez, Amelie Delaunay

This patch enables RTC on stm32429i-eval with default LSE clock source.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 arch/arm/boot/dts/stm32429i-eval.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 8b158f9..5007da9 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -134,6 +134,10 @@
 	};
 };
 
+&rtc {
+	status = "okay";
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [PATCHv3 8/8] ARM: configs: stm32: Add RTC support in STM32 defconfig
  2017-01-05 13:43 [PATCHv3 0/8] Add support for STM32 RTC Amelie Delaunay
                   ` (6 preceding siblings ...)
  2017-01-05 13:43 ` [PATCHv3 7/8] ARM: dts: stm32: enable RTC on stm32429i-eval Amelie Delaunay
@ 2017-01-05 13:43 ` Amelie Delaunay
  2017-01-16 14:37   ` Alexandre Torgue
  7 siblings, 1 reply; 18+ messages in thread
From: Amelie Delaunay @ 2017-01-05 13:43 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel,
	Gabriel Fernandez, Amelie Delaunay

This patch adds STM32 RTC support in stm32_defconfig file.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 arch/arm/configs/stm32_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index be19e09..0acff9e 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -57,6 +57,8 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STM32=y
 CONFIG_DMADEVICES=y
 CONFIG_STM32_DMA=y
 # CONFIG_FILE_LOCKING is not set
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* Re: [PATCHv3 3/8] rtc: add STM32 RTC driver
  2017-01-05 13:43 ` [PATCHv3 3/8] rtc: add STM32 RTC driver Amelie Delaunay
@ 2017-01-05 17:33   ` Mathieu Poirier
  2017-01-09 16:46     ` Amelie DELAUNAY
  2017-01-11  0:08   ` Alexandre Belloni
  1 sibling, 1 reply; 18+ messages in thread
From: Mathieu Poirier @ 2017-01-05 17:33 UTC (permalink / raw)
  To: Amelie Delaunay
  Cc: Alessandro Zummo, Alexandre Belloni, Rob Herring, Mark Rutland,
	Maxime Coquelin, Alexandre Torgue, Russell King, devicetree,
	rtc-linux, linux-kernel, Gabriel Fernandez, linux-arm-kernel

On Thu, Jan 05, 2017 at 02:43:24PM +0100, Amelie Delaunay wrote:
> This patch adds support for the STM32 RTC.
> 
> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
> ---
>  drivers/rtc/Kconfig     |  11 +
>  drivers/rtc/Makefile    |   1 +
>  drivers/rtc/rtc-stm32.c | 776 ++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 788 insertions(+)
>  create mode 100644 drivers/rtc/rtc-stm32.c
> 
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index e859d14..11eb28a 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -1706,6 +1706,17 @@ config RTC_DRV_PIC32
>  	   This driver can also be built as a module. If so, the module
>  	   will be called rtc-pic32
>  
> +config RTC_DRV_STM32
> +	tristate "STM32 RTC"
> +	select REGMAP_MMIO
> +	depends on ARCH_STM32 || COMPILE_TEST
> +	help
> +	   If you say yes here you get support for the STM32 On-Chip
> +	   Real Time Clock.
> +
> +	   This driver can also be built as a module, if so, the module
> +	   will be called "rtc-stm32".
> +
>  comment "HID Sensor RTC drivers"
>  
>  config RTC_DRV_HID_SENSOR_TIME
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index 1ac694a..87bd9cc 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -144,6 +144,7 @@ obj-$(CONFIG_RTC_DRV_SNVS)	+= rtc-snvs.o
>  obj-$(CONFIG_RTC_DRV_SPEAR)	+= rtc-spear.o
>  obj-$(CONFIG_RTC_DRV_STARFIRE)	+= rtc-starfire.o
>  obj-$(CONFIG_RTC_DRV_STK17TA8)	+= rtc-stk17ta8.o
> +obj-$(CONFIG_RTC_DRV_STM32) 	+= rtc-stm32.o
>  obj-$(CONFIG_RTC_DRV_STMP)	+= rtc-stmp3xxx.o
>  obj-$(CONFIG_RTC_DRV_ST_LPC)	+= rtc-st-lpc.o
>  obj-$(CONFIG_RTC_DRV_SUN4V)	+= rtc-sun4v.o
> diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
> new file mode 100644
> index 0000000..fdd3a31
> --- /dev/null
> +++ b/drivers/rtc/rtc-stm32.c
> @@ -0,0 +1,776 @@
> +/*
> + * Copyright (C) Amelie Delaunay 2016
> + * Author:  Amelie Delaunay <amelie.delaunay@st.com>
> + * License terms:  GNU General Public License (GPL), version 2
> + */
> +
> +#include <linux/bcd.h>
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/ioport.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +#include <linux/spinlock.h>
> +
> +#define DRIVER_NAME "stm32_rtc"
> +
> +/* STM32 RTC registers */
> +#define STM32_RTC_TR		0x00
> +#define STM32_RTC_DR		0x04
> +#define STM32_RTC_CR		0x08
> +#define STM32_RTC_ISR		0x0C
> +#define STM32_RTC_PRER		0x10
> +#define STM32_RTC_ALRMAR	0x1C
> +#define STM32_RTC_WPR		0x24
> +
> +/* STM32_RTC_TR bit fields  */
> +#define STM32_RTC_TR_SEC_SHIFT		0
> +#define STM32_RTC_TR_SEC		GENMASK(6, 0)
> +#define STM32_RTC_TR_MIN_SHIFT		8
> +#define STM32_RTC_TR_MIN		GENMASK(14, 8)
> +#define STM32_RTC_TR_HOUR_SHIFT		16
> +#define STM32_RTC_TR_HOUR		GENMASK(21, 16)
> +
> +/* STM32_RTC_DR bit fields */
> +#define STM32_RTC_DR_DATE_SHIFT		0
> +#define STM32_RTC_DR_DATE		GENMASK(5, 0)
> +#define STM32_RTC_DR_MONTH_SHIFT	8
> +#define STM32_RTC_DR_MONTH		GENMASK(12, 8)
> +#define STM32_RTC_DR_WDAY_SHIFT		13
> +#define STM32_RTC_DR_WDAY		GENMASK(15, 13)
> +#define STM32_RTC_DR_YEAR_SHIFT		16
> +#define STM32_RTC_DR_YEAR		GENMASK(23, 16)
> +
> +/* STM32_RTC_CR bit fields */
> +#define STM32_RTC_CR_FMT		BIT(6)
> +#define STM32_RTC_CR_ALRAE		BIT(8)
> +#define STM32_RTC_CR_ALRAIE		BIT(12)
> +
> +/* STM32_RTC_ISR bit fields */
> +#define STM32_RTC_ISR_ALRAWF		BIT(0)
> +#define STM32_RTC_ISR_INITS		BIT(4)
> +#define STM32_RTC_ISR_RSF		BIT(5)
> +#define STM32_RTC_ISR_INITF		BIT(6)
> +#define STM32_RTC_ISR_INIT		BIT(7)
> +#define STM32_RTC_ISR_ALRAF		BIT(8)
> +
> +/* STM32_RTC_PRER bit fields */
> +#define STM32_RTC_PRER_PRED_S_SHIFT	0
> +#define STM32_RTC_PRER_PRED_S		GENMASK(14, 0)
> +#define STM32_RTC_PRER_PRED_A_SHIFT	16
> +#define STM32_RTC_PRER_PRED_A		GENMASK(22, 16)
> +
> +/* STM32_RTC_ALRMAR and STM32_RTC_ALRMBR bit fields */
> +#define STM32_RTC_ALRMXR_SEC_SHIFT	0
> +#define STM32_RTC_ALRMXR_SEC		GENMASK(6, 0)
> +#define STM32_RTC_ALRMXR_SEC_MASK	BIT(7)
> +#define STM32_RTC_ALRMXR_MIN_SHIFT	8
> +#define STM32_RTC_ALRMXR_MIN		GENMASK(14, 8)
> +#define STM32_RTC_ALRMXR_MIN_MASK	BIT(15)
> +#define STM32_RTC_ALRMXR_HOUR_SHIFT	16
> +#define STM32_RTC_ALRMXR_HOUR		GENMASK(21, 16)
> +#define STM32_RTC_ALRMXR_PM		BIT(22)
> +#define STM32_RTC_ALRMXR_HOUR_MASK	BIT(23)
> +#define STM32_RTC_ALRMXR_DATE_SHIFT	24
> +#define STM32_RTC_ALRMXR_DATE		GENMASK(29, 24)
> +#define STM32_RTC_ALRMXR_WDSEL		BIT(30)
> +#define STM32_RTC_ALRMXR_WDAY_SHIFT	24
> +#define STM32_RTC_ALRMXR_WDAY		GENMASK(27, 24)
> +#define STM32_RTC_ALRMXR_DATE_MASK	BIT(31)
> +
> +/* STM32_RTC_WPR key constants */
> +#define RTC_WPR_1ST_KEY			0xCA
> +#define RTC_WPR_2ND_KEY			0x53
> +#define RTC_WPR_WRONG_KEY		0xFF
> +
> +/*
> + * RTC registers are protected agains parasitic write access.
> + * PWR_CR_DBP bit must be set to enable write access to RTC registers.
> + */
> +/* STM32_PWR_CR */
> +#define PWR_CR				0x00
> +/* STM32_PWR_CR bit field */
> +#define PWR_CR_DBP			BIT(8)
> +
> +static struct regmap *dbp;
> +
> +struct stm32_rtc {
> +	struct rtc_device *rtc_dev;
> +	void __iomem *base;
> +	struct clk *ck_rtc;
> +	spinlock_t lock; /* Protects registers accesses */
> +	int irq_alarm;
> +};
> +
> +static void stm32_rtc_wpr_unlock(struct stm32_rtc *rtc)
> +{
> +	writel_relaxed(RTC_WPR_1ST_KEY, rtc->base + STM32_RTC_WPR);
> +	writel_relaxed(RTC_WPR_2ND_KEY, rtc->base + STM32_RTC_WPR);
> +}
> +
> +static void stm32_rtc_wpr_lock(struct stm32_rtc *rtc)
> +{
> +	writel_relaxed(RTC_WPR_WRONG_KEY, rtc->base + STM32_RTC_WPR);
> +}
> +
> +static int stm32_rtc_enter_init_mode(struct stm32_rtc *rtc)
> +{
> +	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
> +
> +	if (!(isr & STM32_RTC_ISR_INITF)) {
> +		isr |= STM32_RTC_ISR_INIT;
> +		writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
> +
> +		/*
> +		 * It takes around 2 ck_rtc clock cycles to enter in
> +		 * initialization phase mode (and have INITF flag set). As
> +		 * slowest ck_rtc frequency may be 32kHz and highest should be
> +		 * 1MHz, we poll every 10 us with a timeout of 100ms.
> +		 */
> +		return readl_relaxed_poll_timeout_atomic(
> +					rtc->base + STM32_RTC_ISR,
> +					isr, (isr & STM32_RTC_ISR_INITF),
> +					10, 100000);
> +	}
> +
> +	return 0;
> +}
> +
> +static void stm32_rtc_exit_init_mode(struct stm32_rtc *rtc)
> +{
> +	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
> +
> +	isr &= ~STM32_RTC_ISR_INIT;
> +	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
> +}
> +
> +static int stm32_rtc_wait_sync(struct stm32_rtc *rtc)
> +{
> +	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
> +
> +	isr &= ~STM32_RTC_ISR_RSF;
> +	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
> +
> +	/*
> +	 * Wait for RSF to be set to ensure the calendar registers are
> +	 * synchronised, it takes around 2 ck_rtc clock cycles
> +	 */
> +	return readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
> +						 isr,
> +						 (isr & STM32_RTC_ISR_RSF),
> +						 10, 100000);
> +}
> +
> +static irqreturn_t stm32_rtc_alarm_irq(int irq, void *dev_id)
> +{
> +	struct stm32_rtc *rtc = (struct stm32_rtc *)dev_id;
> +	unsigned int isr, cr;
> +
> +	mutex_lock(&rtc->rtc_dev->ops_lock);
> +
> +	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
> +
> +	if ((isr & STM32_RTC_ISR_ALRAF) &&
> +	    (cr & STM32_RTC_CR_ALRAIE)) {
> +		/* Alarm A flag - Alarm interrupt */
> +		dev_dbg(&rtc->rtc_dev->dev, "Alarm occurred\n");
> +
> +		/* Pass event to the kernel */
> +		rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
> +
> +		/* Clear event flag, otherwise new events won't be received */
> +		writel_relaxed(isr & ~STM32_RTC_ISR_ALRAF,
> +			       rtc->base + STM32_RTC_ISR);
> +	}
> +
> +	mutex_unlock(&rtc->rtc_dev->ops_lock);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/* Convert rtc_time structure from bin to bcd format */
> +static void tm2bcd(struct rtc_time *tm)
> +{
> +	tm->tm_sec = bin2bcd(tm->tm_sec);
> +	tm->tm_min = bin2bcd(tm->tm_min);
> +	tm->tm_hour = bin2bcd(tm->tm_hour);
> +
> +	tm->tm_mday = bin2bcd(tm->tm_mday);
> +	tm->tm_mon = bin2bcd(tm->tm_mon + 1);
> +	tm->tm_year = bin2bcd(tm->tm_year - 100);
> +	/*
> +	 * Number of days since Sunday
> +	 * - on kernel side, 0=Sunday...6=Saturday
> +	 * - on rtc side, 0=invalid,1=Monday...7=Sunday
> +	 */
> +	tm->tm_wday = (!tm->tm_wday) ? 7 : tm->tm_wday;
> +}
> +
> +/* Convert rtc_time structure from bcd to bin format */
> +static void bcd2tm(struct rtc_time *tm)
> +{
> +	tm->tm_sec = bcd2bin(tm->tm_sec);
> +	tm->tm_min = bcd2bin(tm->tm_min);
> +	tm->tm_hour = bcd2bin(tm->tm_hour);
> +
> +	tm->tm_mday = bcd2bin(tm->tm_mday);
> +	tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
> +	tm->tm_year = bcd2bin(tm->tm_year) + 100;
> +	/*
> +	 * Number of days since Sunday
> +	 * - on kernel side, 0=Sunday...6=Saturday
> +	 * - on rtc side, 0=invalid,1=Monday...7=Sunday
> +	 */
> +	tm->tm_wday %= 7;
> +}
> +
> +static int stm32_rtc_read_time(struct device *dev, struct rtc_time *tm)
> +{
> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
> +	unsigned int tr, dr;
> +	unsigned long irqflags;
> +
> +	spin_lock_irqsave(&rtc->lock, irqflags);
> +
> +	/* Time and Date in BCD format */
> +	tr = readl_relaxed(rtc->base + STM32_RTC_TR);
> +	dr = readl_relaxed(rtc->base + STM32_RTC_DR);
> +
> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
> +
> +	tm->tm_sec = (tr & STM32_RTC_TR_SEC) >> STM32_RTC_TR_SEC_SHIFT;
> +	tm->tm_min = (tr & STM32_RTC_TR_MIN) >> STM32_RTC_TR_MIN_SHIFT;
> +	tm->tm_hour = (tr & STM32_RTC_TR_HOUR) >> STM32_RTC_TR_HOUR_SHIFT;
> +
> +	tm->tm_mday = (dr & STM32_RTC_DR_DATE) >> STM32_RTC_DR_DATE_SHIFT;
> +	tm->tm_mon = (dr & STM32_RTC_DR_MONTH) >> STM32_RTC_DR_MONTH_SHIFT;
> +	tm->tm_year = (dr & STM32_RTC_DR_YEAR) >> STM32_RTC_DR_YEAR_SHIFT;
> +	tm->tm_wday = (dr & STM32_RTC_DR_WDAY) >> STM32_RTC_DR_WDAY_SHIFT;
> +
> +	/* We don't report tm_yday and tm_isdst */
> +
> +	bcd2tm(tm);
> +
> +	if (rtc_valid_tm(tm) < 0) {
> +		dev_err(dev, "%s: rtc_time is not valid.\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int stm32_rtc_set_time(struct device *dev, struct rtc_time *tm)
> +{
> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
> +	unsigned int tr, dr;
> +	unsigned long irqflags;
> +	int ret = 0;
> +
> +	if (rtc_valid_tm(tm) < 0) {
> +		dev_err(dev, "%s: rtc_time is not valid.\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	tm2bcd(tm);
> +
> +	/* Time in BCD format */
> +	tr = ((tm->tm_sec << STM32_RTC_TR_SEC_SHIFT) & STM32_RTC_TR_SEC) |
> +	     ((tm->tm_min << STM32_RTC_TR_MIN_SHIFT) & STM32_RTC_TR_MIN) |
> +	     ((tm->tm_hour << STM32_RTC_TR_HOUR_SHIFT) & STM32_RTC_TR_HOUR);
> +
> +	/* Date in BCD format */
> +	dr = ((tm->tm_mday << STM32_RTC_DR_DATE_SHIFT) & STM32_RTC_DR_DATE) |
> +	     ((tm->tm_mon << STM32_RTC_DR_MONTH_SHIFT) & STM32_RTC_DR_MONTH) |
> +	     ((tm->tm_year << STM32_RTC_DR_YEAR_SHIFT) & STM32_RTC_DR_YEAR) |
> +	     ((tm->tm_wday << STM32_RTC_DR_WDAY_SHIFT) & STM32_RTC_DR_WDAY);
> +
> +	spin_lock_irqsave(&rtc->lock, irqflags);
> +
> +	stm32_rtc_wpr_unlock(rtc);
> +
> +	ret = stm32_rtc_enter_init_mode(rtc);
> +	if (ret) {
> +		dev_err(dev, "Can't enter in init mode. Set time aborted.\n");
> +		goto end;
> +	}
> +
> +	writel_relaxed(tr, rtc->base + STM32_RTC_TR);
> +	writel_relaxed(dr, rtc->base + STM32_RTC_DR);
> +
> +	stm32_rtc_exit_init_mode(rtc);
> +
> +	ret = stm32_rtc_wait_sync(rtc);
> +end:
> +	stm32_rtc_wpr_lock(rtc);
> +
> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
> +
> +	return ret;
> +}
> +
> +static int stm32_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
> +	struct rtc_time *tm = &alrm->time;
> +	unsigned int alrmar, cr, isr;
> +	unsigned long irqflags;
> +
> +	spin_lock_irqsave(&rtc->lock, irqflags);
> +
> +	alrmar = readl_relaxed(rtc->base + STM32_RTC_ALRMAR);
> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
> +	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
> +
> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
> +
> +	if (alrmar & STM32_RTC_ALRMXR_DATE_MASK) {
> +		/*
> +		 * Date/day doesn't matter in Alarm comparison so alarm
> +		 * triggers every day
> +		 */
> +		tm->tm_mday = -1;
> +		tm->tm_wday = -1;
> +	} else {
> +		if (alrmar & STM32_RTC_ALRMXR_WDSEL) {
> +			/* Alarm is set to a day of week */
> +			tm->tm_mday = -1;
> +			tm->tm_wday = (alrmar & STM32_RTC_ALRMXR_WDAY) >>
> +				      STM32_RTC_ALRMXR_WDAY_SHIFT;
> +			tm->tm_wday %= 7;
> +		} else {
> +			/* Alarm is set to a day of month */
> +			tm->tm_wday = -1;
> +			tm->tm_mday = (alrmar & STM32_RTC_ALRMXR_DATE) >>
> +				       STM32_RTC_ALRMXR_DATE_SHIFT;
> +		}
> +	}
> +
> +	if (alrmar & STM32_RTC_ALRMXR_HOUR_MASK) {
> +		/* Hours don't matter in Alarm comparison */
> +		tm->tm_hour = -1;
> +	} else {
> +		tm->tm_hour = (alrmar & STM32_RTC_ALRMXR_HOUR) >>
> +			       STM32_RTC_ALRMXR_HOUR_SHIFT;
> +		if (alrmar & STM32_RTC_ALRMXR_PM)
> +			tm->tm_hour += 12;
> +	}
> +
> +	if (alrmar & STM32_RTC_ALRMXR_MIN_MASK) {
> +		/* Minutes don't matter in Alarm comparison */
> +		tm->tm_min = -1;
> +	} else {
> +		tm->tm_min = (alrmar & STM32_RTC_ALRMXR_MIN) >>
> +			      STM32_RTC_ALRMXR_MIN_SHIFT;
> +	}
> +
> +	if (alrmar & STM32_RTC_ALRMXR_SEC_MASK) {
> +		/* Seconds don't matter in Alarm comparison */
> +		tm->tm_sec = -1;
> +	} else {
> +		tm->tm_sec = (alrmar & STM32_RTC_ALRMXR_SEC) >>
> +			      STM32_RTC_ALRMXR_SEC_SHIFT;
> +	}
> +
> +	bcd2tm(tm);
> +
> +	alrm->enabled = (cr & STM32_RTC_CR_ALRAE) ? 1 : 0;
> +	alrm->pending = (isr & STM32_RTC_ISR_ALRAF) ? 1 : 0;
> +
> +	return 0;
> +}
> +
> +static int stm32_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
> +{
> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
> +	unsigned long irqflags;
> +	unsigned int isr, cr;
> +
> +	spin_lock_irqsave(&rtc->lock, irqflags);
> +
> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
> +
> +	stm32_rtc_wpr_unlock(rtc);
> +
> +	/* We expose Alarm A to the kernel */
> +	if (enabled)
> +		cr |= (STM32_RTC_CR_ALRAIE | STM32_RTC_CR_ALRAE);
> +	else
> +		cr &= ~(STM32_RTC_CR_ALRAIE | STM32_RTC_CR_ALRAE);
> +	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
> +
> +	/* Clear event irqflags, otherwise new events won't be received */
> +	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
> +	isr &= ~STM32_RTC_ISR_ALRAF;
> +	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
> +
> +	stm32_rtc_wpr_lock(rtc);
> +
> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
> +
> +	return 0;
> +}
> +
> +static int stm32_rtc_valid_alrm(struct stm32_rtc *rtc, struct rtc_time *tm)
> +{
> +	unsigned int cur_day, cur_mon, cur_year, cur_hour, cur_min, cur_sec;
> +	unsigned int dr = readl_relaxed(rtc->base + STM32_RTC_DR);
> +	unsigned int tr = readl_relaxed(rtc->base + STM32_RTC_TR);
> +
> +	cur_day = (dr & STM32_RTC_DR_DATE) >> STM32_RTC_DR_DATE_SHIFT;
> +	cur_mon = (dr & STM32_RTC_DR_MONTH) >> STM32_RTC_DR_MONTH_SHIFT;
> +	cur_year = (dr & STM32_RTC_DR_YEAR) >> STM32_RTC_DR_YEAR_SHIFT;
> +	cur_sec = (tr & STM32_RTC_TR_SEC) >> STM32_RTC_TR_SEC_SHIFT;
> +	cur_min = (tr & STM32_RTC_TR_MIN) >> STM32_RTC_TR_MIN_SHIFT;
> +	cur_hour = (tr & STM32_RTC_TR_HOUR) >> STM32_RTC_TR_HOUR_SHIFT;
> +
> +	/*
> +	 * Assuming current date is M-D-Y H:M:S.
> +	 * RTC alarm can't be set on a specific month and year.
> +	 * So the valid alarm range is:
> +	 *	M-D-Y H:M:S < alarm <= (M+1)-D-Y H:M:S
> +	 * with a specific case for December...
> +	 */
> +	if ((((tm->tm_year > cur_year) &&
> +	      (tm->tm_mon == 0x1) && (cur_mon == 0x12)) ||
> +	     ((tm->tm_year == cur_year) &&
> +	      (tm->tm_mon <= cur_mon + 1))) &&
> +	    ((tm->tm_mday < cur_day) ||
> +	     ((tm->tm_mday == cur_day) &&
> +	     ((tm->tm_hour < cur_hour) ||
> +	      ((tm->tm_hour == cur_hour) && (tm->tm_min < cur_min)) ||
> +	      ((tm->tm_hour == cur_hour) && (tm->tm_min == cur_min) &&
> +	       (tm->tm_sec <= cur_sec))))))
> +		return 0;
> +
> +	return -EINVAL;
> +}
> +
> +static int stm32_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
> +	struct rtc_time *tm = &alrm->time;
> +	unsigned long irqflags;
> +	unsigned int cr, isr, alrmar;
> +	int ret = 0;
> +
> +	if (rtc_valid_tm(tm)) {
> +		dev_err(dev, "Alarm time not valid.\n");
> +		return -EINVAL;
> +	}
> +
> +	tm2bcd(tm);
> +
> +	/*
> +	 * RTC alarm can't be set on a specific date, unless this date is
> +	 * up to the same day of month next month.
> +	 */
> +	if (stm32_rtc_valid_alrm(rtc, tm) < 0) {
> +		dev_err(dev, "Alarm can be set only on upcoming month.\n");
> +		return -EINVAL;
> +	}
> +
> +	alrmar = 0;
> +	/* tm_year and tm_mon are not used because not supported by RTC */
> +	alrmar |= (tm->tm_mday << STM32_RTC_ALRMXR_DATE_SHIFT) &
> +		  STM32_RTC_ALRMXR_DATE;
> +	/* 24-hour format */
> +	alrmar &= ~STM32_RTC_ALRMXR_PM;
> +	alrmar |= (tm->tm_hour << STM32_RTC_ALRMXR_HOUR_SHIFT) &
> +		  STM32_RTC_ALRMXR_HOUR;
> +	alrmar |= (tm->tm_min << STM32_RTC_ALRMXR_MIN_SHIFT) &
> +		  STM32_RTC_ALRMXR_MIN;
> +	alrmar |= (tm->tm_sec << STM32_RTC_ALRMXR_SEC_SHIFT) &
> +		  STM32_RTC_ALRMXR_SEC;
> +
> +	spin_lock_irqsave(&rtc->lock, irqflags);
> +
> +	stm32_rtc_wpr_unlock(rtc);
> +
> +	/* Disable Alarm */
> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
> +	cr &= ~STM32_RTC_CR_ALRAE;
> +	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
> +
> +	/*
> +	 * Poll Alarm write flag to be sure that Alarm update is allowed: it
> +	 * takes around 2 ck_rtc clock cycles
> +	 */
> +	ret = readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
> +						isr,
> +						(isr & STM32_RTC_ISR_ALRAWF),
> +						10, 100000);
> +
> +	if (ret) {
> +		dev_err(dev, "Alarm update not allowed\n");
> +		goto end;
> +	}
> +
> +	/* Write to Alarm register */
> +	writel_relaxed(alrmar, rtc->base + STM32_RTC_ALRMAR);
> +
> +	if (alrm->enabled)
> +		stm32_rtc_alarm_irq_enable(dev, 1);
> +	else
> +		stm32_rtc_alarm_irq_enable(dev, 0);
> +
> +end:
> +	stm32_rtc_wpr_lock(rtc);
> +
> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
> +
> +	return ret;
> +}
> +
> +static const struct rtc_class_ops stm32_rtc_ops = {
> +	.read_time	= stm32_rtc_read_time,
> +	.set_time	= stm32_rtc_set_time,
> +	.read_alarm	= stm32_rtc_read_alarm,
> +	.set_alarm	= stm32_rtc_set_alarm,
> +	.alarm_irq_enable = stm32_rtc_alarm_irq_enable,
> +};
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id stm32_rtc_of_match[] = {
> +	{ .compatible = "st,stm32-rtc" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, stm32_rtc_of_match);
> +#endif
> +
> +static int stm32_rtc_init(struct platform_device *pdev,
> +			  struct stm32_rtc *rtc)
> +{
> +	unsigned int prer, pred_a, pred_s, pred_a_max, pred_s_max, cr;
> +	unsigned int rate;
> +	unsigned long irqflags;
> +	int ret = 0;
> +
> +	rate = clk_get_rate(rtc->ck_rtc);
> +
> +	/* Find prediv_a and prediv_s to obtain the 1Hz calendar clock */
> +	pred_a_max = STM32_RTC_PRER_PRED_A >> STM32_RTC_PRER_PRED_A_SHIFT;
> +	pred_s_max = STM32_RTC_PRER_PRED_S >> STM32_RTC_PRER_PRED_S_SHIFT;
> +
> +	for (pred_a = pred_a_max; pred_a >= 0; pred_a--) {
> +		pred_s = (rate / (pred_a + 1)) - 1;
> +
> +		if (((pred_s + 1) * (pred_a + 1)) == rate)
> +			break;
> +	}
> +
> +	/*
> +	 * Can't find a 1Hz, so give priority to RTC power consumption
> +	 * by choosing the higher possible value for prediv_a
> +	 */
> +	if ((pred_s > pred_s_max) || (pred_a > pred_a_max)) {
> +		pred_a = pred_a_max;
> +		pred_s = (rate / (pred_a + 1)) - 1;
> +
> +		dev_warn(&pdev->dev, "ck_rtc is %s\n",
> +			 (rate - ((pred_a + 1) * (pred_s + 1)) < 0) ?
> +			 "fast" : "slow");
> +	}
> +
> +	spin_lock_irqsave(&rtc->lock, irqflags);
> +
> +	stm32_rtc_wpr_unlock(rtc);
> +
> +	ret = stm32_rtc_enter_init_mode(rtc);
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"Can't enter in init mode. Prescaler config failed.\n");
> +		goto end;
> +	}
> +
> +	prer = (pred_s << STM32_RTC_PRER_PRED_S_SHIFT) & STM32_RTC_PRER_PRED_S;
> +	writel_relaxed(prer, rtc->base + STM32_RTC_PRER);
> +	prer |= (pred_a << STM32_RTC_PRER_PRED_A_SHIFT) & STM32_RTC_PRER_PRED_A;
> +	writel_relaxed(prer, rtc->base + STM32_RTC_PRER);
> +
> +	/* Force 24h time format */
> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
> +	cr &= ~STM32_RTC_CR_FMT;
> +	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
> +
> +	stm32_rtc_exit_init_mode(rtc);
> +
> +	ret = stm32_rtc_wait_sync(rtc);
> +end:
> +	stm32_rtc_wpr_lock(rtc);
> +
> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
> +
> +	return ret;
> +}
> +
> +static int stm32_rtc_probe(struct platform_device *pdev)
> +{
> +	struct stm32_rtc *rtc;
> +	struct resource *res;
> +	int ret;
> +
> +	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
> +	if (!rtc)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	rtc->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(rtc->base))
> +		return PTR_ERR(rtc->base);
> +
> +	dbp = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "st,syscfg");
> +	if (IS_ERR(dbp)) {
> +		dev_err(&pdev->dev, "no st,syscfg\n");
> +		return PTR_ERR(dbp);
> +	}
> +
> +	spin_lock_init(&rtc->lock);
> +
> +	rtc->ck_rtc = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(rtc->ck_rtc)) {
> +		dev_err(&pdev->dev, "no ck_rtc clock");
> +		return PTR_ERR(rtc->ck_rtc);
> +	}
> +
> +	ret = clk_prepare_enable(rtc->ck_rtc);
> +	if (ret)
> +		return ret;
> +
> +	regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, PWR_CR_DBP);
> +
> +	/*
> +	 * After a system reset, RTC_ISR.INITS flag can be read to check if
> +	 * the calendar has been initalized or not. INITS flag is reset by a
> +	 * power-on reset (no vbat, no power-supply). It is not reset if
> +	 * ck_rtc parent clock has changed (so RTC prescalers need to be
> +	 * changed). That's why we cannot rely on this flag to know if RTC
> +	 * init has to be done.
> +	 */
> +	ret = stm32_rtc_init(pdev, rtc);
> +	if (ret)
> +		goto err;
> +
> +	rtc->irq_alarm = platform_get_irq(pdev, 0);
> +	if (rtc->irq_alarm <= 0) {
> +		dev_err(&pdev->dev, "no alarm irq\n");
> +		ret = rtc->irq_alarm;
> +		goto err;
> +	}
> +
> +	platform_set_drvdata(pdev, rtc);
> +
> +	ret = device_init_wakeup(&pdev->dev, true);
> +	if (ret)
> +		dev_warn(&pdev->dev,
> +			 "alarm won't be able to wake up the system");
> +
> +	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
> +			&stm32_rtc_ops, THIS_MODULE);
> +	if (IS_ERR(rtc->rtc_dev)) {
> +		ret = PTR_ERR(rtc->rtc_dev);
> +		dev_err(&pdev->dev, "rtc device registration failed, err=%d\n",
> +			ret);
> +		goto err;
> +	}
> +
> +	/* Handle RTC alarm interrupts */
> +	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq_alarm, NULL,
> +					stm32_rtc_alarm_irq,
> +					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> +					pdev->name, rtc);
> +	if (ret) {
> +		dev_err(&pdev->dev, "IRQ%d (alarm interrupt) already claimed\n",
> +			rtc->irq_alarm);
> +		goto err;
> +	}
> +
> +	/*
> +	 * If INITS flag is reset (calendar year field set to 0x00), calendar
> +	 * must be initialized
> +	 */
> +	if (!(readl_relaxed(rtc->base + STM32_RTC_ISR) & STM32_RTC_ISR_INITS))
> +		dev_warn(&pdev->dev, "Date/Time must be initialized\n");
> +
> +	return 0;
> +err:
> +	clk_disable_unprepare(rtc->ck_rtc);
> +
> +	regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, ~PWR_CR_DBP);
> +
> +	device_init_wakeup(&pdev->dev, false);
> +
> +	return ret;
> +}
> +
> +static int __exit stm32_rtc_remove(struct platform_device *pdev)
> +{
> +	struct stm32_rtc *rtc = platform_get_drvdata(pdev);
> +	unsigned int cr;
> +
> +	/* Disable interrupts */
> +	stm32_rtc_wpr_unlock(rtc);
> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
> +	cr &= ~STM32_RTC_CR_ALRAIE;
> +	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
> +	stm32_rtc_wpr_lock(rtc);
> +
> +	clk_disable_unprepare(rtc->ck_rtc);
> +
> +	/* Enable backup domain write protection */
> +	regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, ~PWR_CR_DBP);
> +
> +	device_init_wakeup(&pdev->dev, false);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int stm32_rtc_suspend(struct device *dev)
> +{
> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
> +
> +	if (device_may_wakeup(dev))
> +		return enable_irq_wake(rtc->irq_alarm);
> +
> +	return 0;
> +}
> +
> +static int stm32_rtc_resume(struct device *dev)
> +{
> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
> +	int ret = 0;
> +
> +	ret = stm32_rtc_wait_sync(rtc);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (device_may_wakeup(dev))
> +		return disable_irq_wake(rtc->irq_alarm);
> +
> +	return ret;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(stm32_rtc_pm_ops,
> +			 stm32_rtc_suspend, stm32_rtc_resume);
> +
> +static struct platform_driver stm32_rtc_driver = {
> +	.probe		= stm32_rtc_probe,
> +	.remove		= stm32_rtc_remove,
> +	.driver		= {
> +		.name	= DRIVER_NAME,
> +		.pm	= &stm32_rtc_pm_ops,
> +		.of_match_table = stm32_rtc_of_match,
> +	},
> +};
> +
> +module_platform_driver(stm32_rtc_driver);
> +
> +MODULE_ALIAS("platform:" DRIVER_NAME);
> +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics STM32 Real Time Clock driver");
> +MODULE_LICENSE("GPL v2");

Looks much better now.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCHv3 3/8] rtc: add STM32 RTC driver
  2017-01-05 17:33   ` Mathieu Poirier
@ 2017-01-09 16:46     ` Amelie DELAUNAY
  0 siblings, 0 replies; 18+ messages in thread
From: Amelie DELAUNAY @ 2017-01-09 16:46 UTC (permalink / raw)
  To: Mathieu Poirier, Alexandre Belloni
  Cc: Alessandro Zummo, Rob Herring, Mark Rutland, Maxime Coquelin,
	Alexandre TORGUE, Russell King, devicetree, rtc-linux,
	linux-kernel, Gabriel FERNANDEZ, linux-arm-kernel

Hi,

Thanks for reviewing!
Alexandre, could you please review this v3 and say when you plan to take 
this driver in the cycle ?

Thanks,
Amelie
On 01/05/2017 06:33 PM, Mathieu Poirier wrote:
> On Thu, Jan 05, 2017 at 02:43:24PM +0100, Amelie Delaunay wrote:
>> This patch adds support for the STM32 RTC.
>>
>> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
>> ---
>>  drivers/rtc/Kconfig     |  11 +
>>  drivers/rtc/Makefile    |   1 +
>>  drivers/rtc/rtc-stm32.c | 776 ++++++++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 788 insertions(+)
>>  create mode 100644 drivers/rtc/rtc-stm32.c
>>
>> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
>> index e859d14..11eb28a 100644
>> --- a/drivers/rtc/Kconfig
>> +++ b/drivers/rtc/Kconfig
>> @@ -1706,6 +1706,17 @@ config RTC_DRV_PIC32
>>  	   This driver can also be built as a module. If so, the module
>>  	   will be called rtc-pic32
>>
>> +config RTC_DRV_STM32
>> +	tristate "STM32 RTC"
>> +	select REGMAP_MMIO
>> +	depends on ARCH_STM32 || COMPILE_TEST
>> +	help
>> +	   If you say yes here you get support for the STM32 On-Chip
>> +	   Real Time Clock.
>> +
>> +	   This driver can also be built as a module, if so, the module
>> +	   will be called "rtc-stm32".
>> +
>>  comment "HID Sensor RTC drivers"
>>
>>  config RTC_DRV_HID_SENSOR_TIME
>> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
>> index 1ac694a..87bd9cc 100644
>> --- a/drivers/rtc/Makefile
>> +++ b/drivers/rtc/Makefile
>> @@ -144,6 +144,7 @@ obj-$(CONFIG_RTC_DRV_SNVS)	+= rtc-snvs.o
>>  obj-$(CONFIG_RTC_DRV_SPEAR)	+= rtc-spear.o
>>  obj-$(CONFIG_RTC_DRV_STARFIRE)	+= rtc-starfire.o
>>  obj-$(CONFIG_RTC_DRV_STK17TA8)	+= rtc-stk17ta8.o
>> +obj-$(CONFIG_RTC_DRV_STM32) 	+= rtc-stm32.o
>>  obj-$(CONFIG_RTC_DRV_STMP)	+= rtc-stmp3xxx.o
>>  obj-$(CONFIG_RTC_DRV_ST_LPC)	+= rtc-st-lpc.o
>>  obj-$(CONFIG_RTC_DRV_SUN4V)	+= rtc-sun4v.o
>> diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
>> new file mode 100644
>> index 0000000..fdd3a31
>> --- /dev/null
>> +++ b/drivers/rtc/rtc-stm32.c
>> @@ -0,0 +1,776 @@
>> +/*
>> + * Copyright (C) Amelie Delaunay 2016
>> + * Author:  Amelie Delaunay <amelie.delaunay@st.com>
>> + * License terms:  GNU General Public License (GPL), version 2
>> + */
>> +
>> +#include <linux/bcd.h>
>> +#include <linux/clk.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/ioport.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/rtc.h>
>> +#include <linux/spinlock.h>
>> +
>> +#define DRIVER_NAME "stm32_rtc"
>> +
>> +/* STM32 RTC registers */
>> +#define STM32_RTC_TR		0x00
>> +#define STM32_RTC_DR		0x04
>> +#define STM32_RTC_CR		0x08
>> +#define STM32_RTC_ISR		0x0C
>> +#define STM32_RTC_PRER		0x10
>> +#define STM32_RTC_ALRMAR	0x1C
>> +#define STM32_RTC_WPR		0x24
>> +
>> +/* STM32_RTC_TR bit fields  */
>> +#define STM32_RTC_TR_SEC_SHIFT		0
>> +#define STM32_RTC_TR_SEC		GENMASK(6, 0)
>> +#define STM32_RTC_TR_MIN_SHIFT		8
>> +#define STM32_RTC_TR_MIN		GENMASK(14, 8)
>> +#define STM32_RTC_TR_HOUR_SHIFT		16
>> +#define STM32_RTC_TR_HOUR		GENMASK(21, 16)
>> +
>> +/* STM32_RTC_DR bit fields */
>> +#define STM32_RTC_DR_DATE_SHIFT		0
>> +#define STM32_RTC_DR_DATE		GENMASK(5, 0)
>> +#define STM32_RTC_DR_MONTH_SHIFT	8
>> +#define STM32_RTC_DR_MONTH		GENMASK(12, 8)
>> +#define STM32_RTC_DR_WDAY_SHIFT		13
>> +#define STM32_RTC_DR_WDAY		GENMASK(15, 13)
>> +#define STM32_RTC_DR_YEAR_SHIFT		16
>> +#define STM32_RTC_DR_YEAR		GENMASK(23, 16)
>> +
>> +/* STM32_RTC_CR bit fields */
>> +#define STM32_RTC_CR_FMT		BIT(6)
>> +#define STM32_RTC_CR_ALRAE		BIT(8)
>> +#define STM32_RTC_CR_ALRAIE		BIT(12)
>> +
>> +/* STM32_RTC_ISR bit fields */
>> +#define STM32_RTC_ISR_ALRAWF		BIT(0)
>> +#define STM32_RTC_ISR_INITS		BIT(4)
>> +#define STM32_RTC_ISR_RSF		BIT(5)
>> +#define STM32_RTC_ISR_INITF		BIT(6)
>> +#define STM32_RTC_ISR_INIT		BIT(7)
>> +#define STM32_RTC_ISR_ALRAF		BIT(8)
>> +
>> +/* STM32_RTC_PRER bit fields */
>> +#define STM32_RTC_PRER_PRED_S_SHIFT	0
>> +#define STM32_RTC_PRER_PRED_S		GENMASK(14, 0)
>> +#define STM32_RTC_PRER_PRED_A_SHIFT	16
>> +#define STM32_RTC_PRER_PRED_A		GENMASK(22, 16)
>> +
>> +/* STM32_RTC_ALRMAR and STM32_RTC_ALRMBR bit fields */
>> +#define STM32_RTC_ALRMXR_SEC_SHIFT	0
>> +#define STM32_RTC_ALRMXR_SEC		GENMASK(6, 0)
>> +#define STM32_RTC_ALRMXR_SEC_MASK	BIT(7)
>> +#define STM32_RTC_ALRMXR_MIN_SHIFT	8
>> +#define STM32_RTC_ALRMXR_MIN		GENMASK(14, 8)
>> +#define STM32_RTC_ALRMXR_MIN_MASK	BIT(15)
>> +#define STM32_RTC_ALRMXR_HOUR_SHIFT	16
>> +#define STM32_RTC_ALRMXR_HOUR		GENMASK(21, 16)
>> +#define STM32_RTC_ALRMXR_PM		BIT(22)
>> +#define STM32_RTC_ALRMXR_HOUR_MASK	BIT(23)
>> +#define STM32_RTC_ALRMXR_DATE_SHIFT	24
>> +#define STM32_RTC_ALRMXR_DATE		GENMASK(29, 24)
>> +#define STM32_RTC_ALRMXR_WDSEL		BIT(30)
>> +#define STM32_RTC_ALRMXR_WDAY_SHIFT	24
>> +#define STM32_RTC_ALRMXR_WDAY		GENMASK(27, 24)
>> +#define STM32_RTC_ALRMXR_DATE_MASK	BIT(31)
>> +
>> +/* STM32_RTC_WPR key constants */
>> +#define RTC_WPR_1ST_KEY			0xCA
>> +#define RTC_WPR_2ND_KEY			0x53
>> +#define RTC_WPR_WRONG_KEY		0xFF
>> +
>> +/*
>> + * RTC registers are protected agains parasitic write access.
>> + * PWR_CR_DBP bit must be set to enable write access to RTC registers.
>> + */
>> +/* STM32_PWR_CR */
>> +#define PWR_CR				0x00
>> +/* STM32_PWR_CR bit field */
>> +#define PWR_CR_DBP			BIT(8)
>> +
>> +static struct regmap *dbp;
>> +
>> +struct stm32_rtc {
>> +	struct rtc_device *rtc_dev;
>> +	void __iomem *base;
>> +	struct clk *ck_rtc;
>> +	spinlock_t lock; /* Protects registers accesses */
>> +	int irq_alarm;
>> +};
>> +
>> +static void stm32_rtc_wpr_unlock(struct stm32_rtc *rtc)
>> +{
>> +	writel_relaxed(RTC_WPR_1ST_KEY, rtc->base + STM32_RTC_WPR);
>> +	writel_relaxed(RTC_WPR_2ND_KEY, rtc->base + STM32_RTC_WPR);
>> +}
>> +
>> +static void stm32_rtc_wpr_lock(struct stm32_rtc *rtc)
>> +{
>> +	writel_relaxed(RTC_WPR_WRONG_KEY, rtc->base + STM32_RTC_WPR);
>> +}
>> +
>> +static int stm32_rtc_enter_init_mode(struct stm32_rtc *rtc)
>> +{
>> +	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
>> +
>> +	if (!(isr & STM32_RTC_ISR_INITF)) {
>> +		isr |= STM32_RTC_ISR_INIT;
>> +		writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
>> +
>> +		/*
>> +		 * It takes around 2 ck_rtc clock cycles to enter in
>> +		 * initialization phase mode (and have INITF flag set). As
>> +		 * slowest ck_rtc frequency may be 32kHz and highest should be
>> +		 * 1MHz, we poll every 10 us with a timeout of 100ms.
>> +		 */
>> +		return readl_relaxed_poll_timeout_atomic(
>> +					rtc->base + STM32_RTC_ISR,
>> +					isr, (isr & STM32_RTC_ISR_INITF),
>> +					10, 100000);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static void stm32_rtc_exit_init_mode(struct stm32_rtc *rtc)
>> +{
>> +	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
>> +
>> +	isr &= ~STM32_RTC_ISR_INIT;
>> +	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
>> +}
>> +
>> +static int stm32_rtc_wait_sync(struct stm32_rtc *rtc)
>> +{
>> +	unsigned int isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
>> +
>> +	isr &= ~STM32_RTC_ISR_RSF;
>> +	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
>> +
>> +	/*
>> +	 * Wait for RSF to be set to ensure the calendar registers are
>> +	 * synchronised, it takes around 2 ck_rtc clock cycles
>> +	 */
>> +	return readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
>> +						 isr,
>> +						 (isr & STM32_RTC_ISR_RSF),
>> +						 10, 100000);
>> +}
>> +
>> +static irqreturn_t stm32_rtc_alarm_irq(int irq, void *dev_id)
>> +{
>> +	struct stm32_rtc *rtc = (struct stm32_rtc *)dev_id;
>> +	unsigned int isr, cr;
>> +
>> +	mutex_lock(&rtc->rtc_dev->ops_lock);
>> +
>> +	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
>> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
>> +
>> +	if ((isr & STM32_RTC_ISR_ALRAF) &&
>> +	    (cr & STM32_RTC_CR_ALRAIE)) {
>> +		/* Alarm A flag - Alarm interrupt */
>> +		dev_dbg(&rtc->rtc_dev->dev, "Alarm occurred\n");
>> +
>> +		/* Pass event to the kernel */
>> +		rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
>> +
>> +		/* Clear event flag, otherwise new events won't be received */
>> +		writel_relaxed(isr & ~STM32_RTC_ISR_ALRAF,
>> +			       rtc->base + STM32_RTC_ISR);
>> +	}
>> +
>> +	mutex_unlock(&rtc->rtc_dev->ops_lock);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +/* Convert rtc_time structure from bin to bcd format */
>> +static void tm2bcd(struct rtc_time *tm)
>> +{
>> +	tm->tm_sec = bin2bcd(tm->tm_sec);
>> +	tm->tm_min = bin2bcd(tm->tm_min);
>> +	tm->tm_hour = bin2bcd(tm->tm_hour);
>> +
>> +	tm->tm_mday = bin2bcd(tm->tm_mday);
>> +	tm->tm_mon = bin2bcd(tm->tm_mon + 1);
>> +	tm->tm_year = bin2bcd(tm->tm_year - 100);
>> +	/*
>> +	 * Number of days since Sunday
>> +	 * - on kernel side, 0=Sunday...6=Saturday
>> +	 * - on rtc side, 0=invalid,1=Monday...7=Sunday
>> +	 */
>> +	tm->tm_wday = (!tm->tm_wday) ? 7 : tm->tm_wday;
>> +}
>> +
>> +/* Convert rtc_time structure from bcd to bin format */
>> +static void bcd2tm(struct rtc_time *tm)
>> +{
>> +	tm->tm_sec = bcd2bin(tm->tm_sec);
>> +	tm->tm_min = bcd2bin(tm->tm_min);
>> +	tm->tm_hour = bcd2bin(tm->tm_hour);
>> +
>> +	tm->tm_mday = bcd2bin(tm->tm_mday);
>> +	tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
>> +	tm->tm_year = bcd2bin(tm->tm_year) + 100;
>> +	/*
>> +	 * Number of days since Sunday
>> +	 * - on kernel side, 0=Sunday...6=Saturday
>> +	 * - on rtc side, 0=invalid,1=Monday...7=Sunday
>> +	 */
>> +	tm->tm_wday %= 7;
>> +}
>> +
>> +static int stm32_rtc_read_time(struct device *dev, struct rtc_time *tm)
>> +{
>> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
>> +	unsigned int tr, dr;
>> +	unsigned long irqflags;
>> +
>> +	spin_lock_irqsave(&rtc->lock, irqflags);
>> +
>> +	/* Time and Date in BCD format */
>> +	tr = readl_relaxed(rtc->base + STM32_RTC_TR);
>> +	dr = readl_relaxed(rtc->base + STM32_RTC_DR);
>> +
>> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
>> +
>> +	tm->tm_sec = (tr & STM32_RTC_TR_SEC) >> STM32_RTC_TR_SEC_SHIFT;
>> +	tm->tm_min = (tr & STM32_RTC_TR_MIN) >> STM32_RTC_TR_MIN_SHIFT;
>> +	tm->tm_hour = (tr & STM32_RTC_TR_HOUR) >> STM32_RTC_TR_HOUR_SHIFT;
>> +
>> +	tm->tm_mday = (dr & STM32_RTC_DR_DATE) >> STM32_RTC_DR_DATE_SHIFT;
>> +	tm->tm_mon = (dr & STM32_RTC_DR_MONTH) >> STM32_RTC_DR_MONTH_SHIFT;
>> +	tm->tm_year = (dr & STM32_RTC_DR_YEAR) >> STM32_RTC_DR_YEAR_SHIFT;
>> +	tm->tm_wday = (dr & STM32_RTC_DR_WDAY) >> STM32_RTC_DR_WDAY_SHIFT;
>> +
>> +	/* We don't report tm_yday and tm_isdst */
>> +
>> +	bcd2tm(tm);
>> +
>> +	if (rtc_valid_tm(tm) < 0) {
>> +		dev_err(dev, "%s: rtc_time is not valid.\n", __func__);
>> +		return -EINVAL;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_rtc_set_time(struct device *dev, struct rtc_time *tm)
>> +{
>> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
>> +	unsigned int tr, dr;
>> +	unsigned long irqflags;
>> +	int ret = 0;
>> +
>> +	if (rtc_valid_tm(tm) < 0) {
>> +		dev_err(dev, "%s: rtc_time is not valid.\n", __func__);
>> +		return -EINVAL;
>> +	}
>> +
>> +	tm2bcd(tm);
>> +
>> +	/* Time in BCD format */
>> +	tr = ((tm->tm_sec << STM32_RTC_TR_SEC_SHIFT) & STM32_RTC_TR_SEC) |
>> +	     ((tm->tm_min << STM32_RTC_TR_MIN_SHIFT) & STM32_RTC_TR_MIN) |
>> +	     ((tm->tm_hour << STM32_RTC_TR_HOUR_SHIFT) & STM32_RTC_TR_HOUR);
>> +
>> +	/* Date in BCD format */
>> +	dr = ((tm->tm_mday << STM32_RTC_DR_DATE_SHIFT) & STM32_RTC_DR_DATE) |
>> +	     ((tm->tm_mon << STM32_RTC_DR_MONTH_SHIFT) & STM32_RTC_DR_MONTH) |
>> +	     ((tm->tm_year << STM32_RTC_DR_YEAR_SHIFT) & STM32_RTC_DR_YEAR) |
>> +	     ((tm->tm_wday << STM32_RTC_DR_WDAY_SHIFT) & STM32_RTC_DR_WDAY);
>> +
>> +	spin_lock_irqsave(&rtc->lock, irqflags);
>> +
>> +	stm32_rtc_wpr_unlock(rtc);
>> +
>> +	ret = stm32_rtc_enter_init_mode(rtc);
>> +	if (ret) {
>> +		dev_err(dev, "Can't enter in init mode. Set time aborted.\n");
>> +		goto end;
>> +	}
>> +
>> +	writel_relaxed(tr, rtc->base + STM32_RTC_TR);
>> +	writel_relaxed(dr, rtc->base + STM32_RTC_DR);
>> +
>> +	stm32_rtc_exit_init_mode(rtc);
>> +
>> +	ret = stm32_rtc_wait_sync(rtc);
>> +end:
>> +	stm32_rtc_wpr_lock(rtc);
>> +
>> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
>> +
>> +	return ret;
>> +}
>> +
>> +static int stm32_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
>> +{
>> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
>> +	struct rtc_time *tm = &alrm->time;
>> +	unsigned int alrmar, cr, isr;
>> +	unsigned long irqflags;
>> +
>> +	spin_lock_irqsave(&rtc->lock, irqflags);
>> +
>> +	alrmar = readl_relaxed(rtc->base + STM32_RTC_ALRMAR);
>> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
>> +	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
>> +
>> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
>> +
>> +	if (alrmar & STM32_RTC_ALRMXR_DATE_MASK) {
>> +		/*
>> +		 * Date/day doesn't matter in Alarm comparison so alarm
>> +		 * triggers every day
>> +		 */
>> +		tm->tm_mday = -1;
>> +		tm->tm_wday = -1;
>> +	} else {
>> +		if (alrmar & STM32_RTC_ALRMXR_WDSEL) {
>> +			/* Alarm is set to a day of week */
>> +			tm->tm_mday = -1;
>> +			tm->tm_wday = (alrmar & STM32_RTC_ALRMXR_WDAY) >>
>> +				      STM32_RTC_ALRMXR_WDAY_SHIFT;
>> +			tm->tm_wday %= 7;
>> +		} else {
>> +			/* Alarm is set to a day of month */
>> +			tm->tm_wday = -1;
>> +			tm->tm_mday = (alrmar & STM32_RTC_ALRMXR_DATE) >>
>> +				       STM32_RTC_ALRMXR_DATE_SHIFT;
>> +		}
>> +	}
>> +
>> +	if (alrmar & STM32_RTC_ALRMXR_HOUR_MASK) {
>> +		/* Hours don't matter in Alarm comparison */
>> +		tm->tm_hour = -1;
>> +	} else {
>> +		tm->tm_hour = (alrmar & STM32_RTC_ALRMXR_HOUR) >>
>> +			       STM32_RTC_ALRMXR_HOUR_SHIFT;
>> +		if (alrmar & STM32_RTC_ALRMXR_PM)
>> +			tm->tm_hour += 12;
>> +	}
>> +
>> +	if (alrmar & STM32_RTC_ALRMXR_MIN_MASK) {
>> +		/* Minutes don't matter in Alarm comparison */
>> +		tm->tm_min = -1;
>> +	} else {
>> +		tm->tm_min = (alrmar & STM32_RTC_ALRMXR_MIN) >>
>> +			      STM32_RTC_ALRMXR_MIN_SHIFT;
>> +	}
>> +
>> +	if (alrmar & STM32_RTC_ALRMXR_SEC_MASK) {
>> +		/* Seconds don't matter in Alarm comparison */
>> +		tm->tm_sec = -1;
>> +	} else {
>> +		tm->tm_sec = (alrmar & STM32_RTC_ALRMXR_SEC) >>
>> +			      STM32_RTC_ALRMXR_SEC_SHIFT;
>> +	}
>> +
>> +	bcd2tm(tm);
>> +
>> +	alrm->enabled = (cr & STM32_RTC_CR_ALRAE) ? 1 : 0;
>> +	alrm->pending = (isr & STM32_RTC_ISR_ALRAF) ? 1 : 0;
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
>> +{
>> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
>> +	unsigned long irqflags;
>> +	unsigned int isr, cr;
>> +
>> +	spin_lock_irqsave(&rtc->lock, irqflags);
>> +
>> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
>> +
>> +	stm32_rtc_wpr_unlock(rtc);
>> +
>> +	/* We expose Alarm A to the kernel */
>> +	if (enabled)
>> +		cr |= (STM32_RTC_CR_ALRAIE | STM32_RTC_CR_ALRAE);
>> +	else
>> +		cr &= ~(STM32_RTC_CR_ALRAIE | STM32_RTC_CR_ALRAE);
>> +	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
>> +
>> +	/* Clear event irqflags, otherwise new events won't be received */
>> +	isr = readl_relaxed(rtc->base + STM32_RTC_ISR);
>> +	isr &= ~STM32_RTC_ISR_ALRAF;
>> +	writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
>> +
>> +	stm32_rtc_wpr_lock(rtc);
>> +
>> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_rtc_valid_alrm(struct stm32_rtc *rtc, struct rtc_time *tm)
>> +{
>> +	unsigned int cur_day, cur_mon, cur_year, cur_hour, cur_min, cur_sec;
>> +	unsigned int dr = readl_relaxed(rtc->base + STM32_RTC_DR);
>> +	unsigned int tr = readl_relaxed(rtc->base + STM32_RTC_TR);
>> +
>> +	cur_day = (dr & STM32_RTC_DR_DATE) >> STM32_RTC_DR_DATE_SHIFT;
>> +	cur_mon = (dr & STM32_RTC_DR_MONTH) >> STM32_RTC_DR_MONTH_SHIFT;
>> +	cur_year = (dr & STM32_RTC_DR_YEAR) >> STM32_RTC_DR_YEAR_SHIFT;
>> +	cur_sec = (tr & STM32_RTC_TR_SEC) >> STM32_RTC_TR_SEC_SHIFT;
>> +	cur_min = (tr & STM32_RTC_TR_MIN) >> STM32_RTC_TR_MIN_SHIFT;
>> +	cur_hour = (tr & STM32_RTC_TR_HOUR) >> STM32_RTC_TR_HOUR_SHIFT;
>> +
>> +	/*
>> +	 * Assuming current date is M-D-Y H:M:S.
>> +	 * RTC alarm can't be set on a specific month and year.
>> +	 * So the valid alarm range is:
>> +	 *	M-D-Y H:M:S < alarm <= (M+1)-D-Y H:M:S
>> +	 * with a specific case for December...
>> +	 */
>> +	if ((((tm->tm_year > cur_year) &&
>> +	      (tm->tm_mon == 0x1) && (cur_mon == 0x12)) ||
>> +	     ((tm->tm_year == cur_year) &&
>> +	      (tm->tm_mon <= cur_mon + 1))) &&
>> +	    ((tm->tm_mday < cur_day) ||
>> +	     ((tm->tm_mday == cur_day) &&
>> +	     ((tm->tm_hour < cur_hour) ||
>> +	      ((tm->tm_hour == cur_hour) && (tm->tm_min < cur_min)) ||
>> +	      ((tm->tm_hour == cur_hour) && (tm->tm_min == cur_min) &&
>> +	       (tm->tm_sec <= cur_sec))))))
>> +		return 0;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int stm32_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
>> +{
>> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
>> +	struct rtc_time *tm = &alrm->time;
>> +	unsigned long irqflags;
>> +	unsigned int cr, isr, alrmar;
>> +	int ret = 0;
>> +
>> +	if (rtc_valid_tm(tm)) {
>> +		dev_err(dev, "Alarm time not valid.\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	tm2bcd(tm);
>> +
>> +	/*
>> +	 * RTC alarm can't be set on a specific date, unless this date is
>> +	 * up to the same day of month next month.
>> +	 */
>> +	if (stm32_rtc_valid_alrm(rtc, tm) < 0) {
>> +		dev_err(dev, "Alarm can be set only on upcoming month.\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	alrmar = 0;
>> +	/* tm_year and tm_mon are not used because not supported by RTC */
>> +	alrmar |= (tm->tm_mday << STM32_RTC_ALRMXR_DATE_SHIFT) &
>> +		  STM32_RTC_ALRMXR_DATE;
>> +	/* 24-hour format */
>> +	alrmar &= ~STM32_RTC_ALRMXR_PM;
>> +	alrmar |= (tm->tm_hour << STM32_RTC_ALRMXR_HOUR_SHIFT) &
>> +		  STM32_RTC_ALRMXR_HOUR;
>> +	alrmar |= (tm->tm_min << STM32_RTC_ALRMXR_MIN_SHIFT) &
>> +		  STM32_RTC_ALRMXR_MIN;
>> +	alrmar |= (tm->tm_sec << STM32_RTC_ALRMXR_SEC_SHIFT) &
>> +		  STM32_RTC_ALRMXR_SEC;
>> +
>> +	spin_lock_irqsave(&rtc->lock, irqflags);
>> +
>> +	stm32_rtc_wpr_unlock(rtc);
>> +
>> +	/* Disable Alarm */
>> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
>> +	cr &= ~STM32_RTC_CR_ALRAE;
>> +	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
>> +
>> +	/*
>> +	 * Poll Alarm write flag to be sure that Alarm update is allowed: it
>> +	 * takes around 2 ck_rtc clock cycles
>> +	 */
>> +	ret = readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
>> +						isr,
>> +						(isr & STM32_RTC_ISR_ALRAWF),
>> +						10, 100000);
>> +
>> +	if (ret) {
>> +		dev_err(dev, "Alarm update not allowed\n");
>> +		goto end;
>> +	}
>> +
>> +	/* Write to Alarm register */
>> +	writel_relaxed(alrmar, rtc->base + STM32_RTC_ALRMAR);
>> +
>> +	if (alrm->enabled)
>> +		stm32_rtc_alarm_irq_enable(dev, 1);
>> +	else
>> +		stm32_rtc_alarm_irq_enable(dev, 0);
>> +
>> +end:
>> +	stm32_rtc_wpr_lock(rtc);
>> +
>> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct rtc_class_ops stm32_rtc_ops = {
>> +	.read_time	= stm32_rtc_read_time,
>> +	.set_time	= stm32_rtc_set_time,
>> +	.read_alarm	= stm32_rtc_read_alarm,
>> +	.set_alarm	= stm32_rtc_set_alarm,
>> +	.alarm_irq_enable = stm32_rtc_alarm_irq_enable,
>> +};
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id stm32_rtc_of_match[] = {
>> +	{ .compatible = "st,stm32-rtc" },
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, stm32_rtc_of_match);
>> +#endif
>> +
>> +static int stm32_rtc_init(struct platform_device *pdev,
>> +			  struct stm32_rtc *rtc)
>> +{
>> +	unsigned int prer, pred_a, pred_s, pred_a_max, pred_s_max, cr;
>> +	unsigned int rate;
>> +	unsigned long irqflags;
>> +	int ret = 0;
>> +
>> +	rate = clk_get_rate(rtc->ck_rtc);
>> +
>> +	/* Find prediv_a and prediv_s to obtain the 1Hz calendar clock */
>> +	pred_a_max = STM32_RTC_PRER_PRED_A >> STM32_RTC_PRER_PRED_A_SHIFT;
>> +	pred_s_max = STM32_RTC_PRER_PRED_S >> STM32_RTC_PRER_PRED_S_SHIFT;
>> +
>> +	for (pred_a = pred_a_max; pred_a >= 0; pred_a--) {
>> +		pred_s = (rate / (pred_a + 1)) - 1;
>> +
>> +		if (((pred_s + 1) * (pred_a + 1)) == rate)
>> +			break;
>> +	}
>> +
>> +	/*
>> +	 * Can't find a 1Hz, so give priority to RTC power consumption
>> +	 * by choosing the higher possible value for prediv_a
>> +	 */
>> +	if ((pred_s > pred_s_max) || (pred_a > pred_a_max)) {
>> +		pred_a = pred_a_max;
>> +		pred_s = (rate / (pred_a + 1)) - 1;
>> +
>> +		dev_warn(&pdev->dev, "ck_rtc is %s\n",
>> +			 (rate - ((pred_a + 1) * (pred_s + 1)) < 0) ?
>> +			 "fast" : "slow");
>> +	}
>> +
>> +	spin_lock_irqsave(&rtc->lock, irqflags);
>> +
>> +	stm32_rtc_wpr_unlock(rtc);
>> +
>> +	ret = stm32_rtc_enter_init_mode(rtc);
>> +	if (ret) {
>> +		dev_err(&pdev->dev,
>> +			"Can't enter in init mode. Prescaler config failed.\n");
>> +		goto end;
>> +	}
>> +
>> +	prer = (pred_s << STM32_RTC_PRER_PRED_S_SHIFT) & STM32_RTC_PRER_PRED_S;
>> +	writel_relaxed(prer, rtc->base + STM32_RTC_PRER);
>> +	prer |= (pred_a << STM32_RTC_PRER_PRED_A_SHIFT) & STM32_RTC_PRER_PRED_A;
>> +	writel_relaxed(prer, rtc->base + STM32_RTC_PRER);
>> +
>> +	/* Force 24h time format */
>> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
>> +	cr &= ~STM32_RTC_CR_FMT;
>> +	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
>> +
>> +	stm32_rtc_exit_init_mode(rtc);
>> +
>> +	ret = stm32_rtc_wait_sync(rtc);
>> +end:
>> +	stm32_rtc_wpr_lock(rtc);
>> +
>> +	spin_unlock_irqrestore(&rtc->lock, irqflags);
>> +
>> +	return ret;
>> +}
>> +
>> +static int stm32_rtc_probe(struct platform_device *pdev)
>> +{
>> +	struct stm32_rtc *rtc;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
>> +	if (!rtc)
>> +		return -ENOMEM;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	rtc->base = devm_ioremap_resource(&pdev->dev, res);
>> +	if (IS_ERR(rtc->base))
>> +		return PTR_ERR(rtc->base);
>> +
>> +	dbp = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "st,syscfg");
>> +	if (IS_ERR(dbp)) {
>> +		dev_err(&pdev->dev, "no st,syscfg\n");
>> +		return PTR_ERR(dbp);
>> +	}
>> +
>> +	spin_lock_init(&rtc->lock);
>> +
>> +	rtc->ck_rtc = devm_clk_get(&pdev->dev, NULL);
>> +	if (IS_ERR(rtc->ck_rtc)) {
>> +		dev_err(&pdev->dev, "no ck_rtc clock");
>> +		return PTR_ERR(rtc->ck_rtc);
>> +	}
>> +
>> +	ret = clk_prepare_enable(rtc->ck_rtc);
>> +	if (ret)
>> +		return ret;
>> +
>> +	regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, PWR_CR_DBP);
>> +
>> +	/*
>> +	 * After a system reset, RTC_ISR.INITS flag can be read to check if
>> +	 * the calendar has been initalized or not. INITS flag is reset by a
>> +	 * power-on reset (no vbat, no power-supply). It is not reset if
>> +	 * ck_rtc parent clock has changed (so RTC prescalers need to be
>> +	 * changed). That's why we cannot rely on this flag to know if RTC
>> +	 * init has to be done.
>> +	 */
>> +	ret = stm32_rtc_init(pdev, rtc);
>> +	if (ret)
>> +		goto err;
>> +
>> +	rtc->irq_alarm = platform_get_irq(pdev, 0);
>> +	if (rtc->irq_alarm <= 0) {
>> +		dev_err(&pdev->dev, "no alarm irq\n");
>> +		ret = rtc->irq_alarm;
>> +		goto err;
>> +	}
>> +
>> +	platform_set_drvdata(pdev, rtc);
>> +
>> +	ret = device_init_wakeup(&pdev->dev, true);
>> +	if (ret)
>> +		dev_warn(&pdev->dev,
>> +			 "alarm won't be able to wake up the system");
>> +
>> +	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
>> +			&stm32_rtc_ops, THIS_MODULE);
>> +	if (IS_ERR(rtc->rtc_dev)) {
>> +		ret = PTR_ERR(rtc->rtc_dev);
>> +		dev_err(&pdev->dev, "rtc device registration failed, err=%d\n",
>> +			ret);
>> +		goto err;
>> +	}
>> +
>> +	/* Handle RTC alarm interrupts */
>> +	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq_alarm, NULL,
>> +					stm32_rtc_alarm_irq,
>> +					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
>> +					pdev->name, rtc);
>> +	if (ret) {
>> +		dev_err(&pdev->dev, "IRQ%d (alarm interrupt) already claimed\n",
>> +			rtc->irq_alarm);
>> +		goto err;
>> +	}
>> +
>> +	/*
>> +	 * If INITS flag is reset (calendar year field set to 0x00), calendar
>> +	 * must be initialized
>> +	 */
>> +	if (!(readl_relaxed(rtc->base + STM32_RTC_ISR) & STM32_RTC_ISR_INITS))
>> +		dev_warn(&pdev->dev, "Date/Time must be initialized\n");
>> +
>> +	return 0;
>> +err:
>> +	clk_disable_unprepare(rtc->ck_rtc);
>> +
>> +	regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, ~PWR_CR_DBP);
>> +
>> +	device_init_wakeup(&pdev->dev, false);
>> +
>> +	return ret;
>> +}
>> +
>> +static int __exit stm32_rtc_remove(struct platform_device *pdev)
>> +{
>> +	struct stm32_rtc *rtc = platform_get_drvdata(pdev);
>> +	unsigned int cr;
>> +
>> +	/* Disable interrupts */
>> +	stm32_rtc_wpr_unlock(rtc);
>> +	cr = readl_relaxed(rtc->base + STM32_RTC_CR);
>> +	cr &= ~STM32_RTC_CR_ALRAIE;
>> +	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
>> +	stm32_rtc_wpr_lock(rtc);
>> +
>> +	clk_disable_unprepare(rtc->ck_rtc);
>> +
>> +	/* Enable backup domain write protection */
>> +	regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, ~PWR_CR_DBP);
>> +
>> +	device_init_wakeup(&pdev->dev, false);
>> +
>> +	return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int stm32_rtc_suspend(struct device *dev)
>> +{
>> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
>> +
>> +	if (device_may_wakeup(dev))
>> +		return enable_irq_wake(rtc->irq_alarm);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_rtc_resume(struct device *dev)
>> +{
>> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
>> +	int ret = 0;
>> +
>> +	ret = stm32_rtc_wait_sync(rtc);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	if (device_may_wakeup(dev))
>> +		return disable_irq_wake(rtc->irq_alarm);
>> +
>> +	return ret;
>> +}
>> +#endif
>> +
>> +static SIMPLE_DEV_PM_OPS(stm32_rtc_pm_ops,
>> +			 stm32_rtc_suspend, stm32_rtc_resume);
>> +
>> +static struct platform_driver stm32_rtc_driver = {
>> +	.probe		= stm32_rtc_probe,
>> +	.remove		= stm32_rtc_remove,
>> +	.driver		= {
>> +		.name	= DRIVER_NAME,
>> +		.pm	= &stm32_rtc_pm_ops,
>> +		.of_match_table = stm32_rtc_of_match,
>> +	},
>> +};
>> +
>> +module_platform_driver(stm32_rtc_driver);
>> +
>> +MODULE_ALIAS("platform:" DRIVER_NAME);
>> +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
>> +MODULE_DESCRIPTION("STMicroelectronics STM32 Real Time Clock driver");
>> +MODULE_LICENSE("GPL v2");
>
> Looks much better now.
>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
>
>> --
>> 1.9.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCHv3 3/8] rtc: add STM32 RTC driver
  2017-01-05 13:43 ` [PATCHv3 3/8] rtc: add STM32 RTC driver Amelie Delaunay
  2017-01-05 17:33   ` Mathieu Poirier
@ 2017-01-11  0:08   ` Alexandre Belloni
  2017-01-11 10:07     ` Amelie DELAUNAY
  1 sibling, 1 reply; 18+ messages in thread
From: Alexandre Belloni @ 2017-01-11  0:08 UTC (permalink / raw)
  To: Amelie Delaunay
  Cc: Alessandro Zummo, Rob Herring, Mark Rutland, Maxime Coquelin,
	Alexandre Torgue, Russell King, rtc-linux, devicetree,
	linux-arm-kernel, linux-kernel, Gabriel Fernandez

Looks good to me, however...


On 05/01/2017 at 14:43:24 +0100, Amelie Delaunay wrote :
> +struct stm32_rtc {
> +	struct rtc_device *rtc_dev;
> +	void __iomem *base;
> +	struct clk *ck_rtc;
> +	spinlock_t lock; /* Protects registers accesses */

This spinlock seems to be useless, the rtc ops_lock is already
protecting everywhere it is taken.

> +	int irq_alarm;
> +};
> +

[...]

> +static int stm32_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
> +	struct rtc_time *tm = &alrm->time;
> +	unsigned long irqflags;
> +	unsigned int cr, isr, alrmar;
> +	int ret = 0;
> +
> +	if (rtc_valid_tm(tm)) {
> +		dev_err(dev, "Alarm time not valid.\n");
> +		return -EINVAL;

This will never happen, tm is already checked multiple times (up to
three) in the core before this function can be called.

> +	}
> +

You don't need to resend the whole series, just this patch. I'll take
2/8 and 3/8, the other ones can go through the stm32 tree.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCHv3 3/8] rtc: add STM32 RTC driver
  2017-01-11  0:08   ` Alexandre Belloni
@ 2017-01-11 10:07     ` Amelie DELAUNAY
  2017-01-11 10:17       ` Alexandre Belloni
  0 siblings, 1 reply; 18+ messages in thread
From: Amelie DELAUNAY @ 2017-01-11 10:07 UTC (permalink / raw)
  To: Alexandre Belloni
  Cc: Alessandro Zummo, Rob Herring, Mark Rutland, Maxime Coquelin,
	Alexandre TORGUE, Russell King, rtc-linux, devicetree,
	linux-arm-kernel, linux-kernel, Gabriel FERNANDEZ

Hi Alexandre,

On 01/11/2017 01:08 AM, Alexandre Belloni wrote:
> Looks good to me, however...
>
>
> On 05/01/2017 at 14:43:24 +0100, Amelie Delaunay wrote :
>> +struct stm32_rtc {
>> +	struct rtc_device *rtc_dev;
>> +	void __iomem *base;
>> +	struct clk *ck_rtc;
>> +	spinlock_t lock; /* Protects registers accesses */
>
> This spinlock seems to be useless, the rtc ops_lock is already
> protecting everywhere it is taken.
>
After having a deeper look on ops_lock, it seems this one is sufficient, 
so I'll remove all spinlock uses in this driver.
>> +	int irq_alarm;
>> +};
>> +
>
> [...]
>
>> +static int stm32_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
>> +{
>> +	struct stm32_rtc *rtc = dev_get_drvdata(dev);
>> +	struct rtc_time *tm = &alrm->time;
>> +	unsigned long irqflags;
>> +	unsigned int cr, isr, alrmar;
>> +	int ret = 0;
>> +
>> +	if (rtc_valid_tm(tm)) {
>> +		dev_err(dev, "Alarm time not valid.\n");
>> +		return -EINVAL;
>
> This will never happen, tm is already checked multiple times (up to
> three) in the core before this function can be called.
>
You're right. I'll remove all rtc_valid_tm calls.
>> +	}
>> +
>
> You don't need to resend the whole series, just this patch. I'll take
> 2/8 and 3/8, the other ones can go through the stm32 tree.
>
Thanks for reviewing. I send a v4 for this patch right now.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCHv3 3/8] rtc: add STM32 RTC driver
  2017-01-11 10:07     ` Amelie DELAUNAY
@ 2017-01-11 10:17       ` Alexandre Belloni
  2017-01-11 10:42         ` Amelie DELAUNAY
  0 siblings, 1 reply; 18+ messages in thread
From: Alexandre Belloni @ 2017-01-11 10:17 UTC (permalink / raw)
  To: Amelie DELAUNAY
  Cc: Alessandro Zummo, Rob Herring, Mark Rutland, Maxime Coquelin,
	Alexandre TORGUE, Russell King, rtc-linux, devicetree,
	linux-arm-kernel, linux-kernel, Gabriel FERNANDEZ

On 11/01/2017 at 11:07:16 +0100, Amelie DELAUNAY wrote :
> > This will never happen, tm is already checked multiple times (up to
> > three) in the core before this function can be called.
> > 
> You're right. I'll remove all rtc_valid_tm calls.

You can keep the one in read_time

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCHv3 3/8] rtc: add STM32 RTC driver
  2017-01-11 10:17       ` Alexandre Belloni
@ 2017-01-11 10:42         ` Amelie DELAUNAY
  2017-01-11 10:50           ` Alexandre Belloni
  0 siblings, 1 reply; 18+ messages in thread
From: Amelie DELAUNAY @ 2017-01-11 10:42 UTC (permalink / raw)
  To: Alexandre Belloni
  Cc: Alessandro Zummo, Rob Herring, Mark Rutland, Maxime Coquelin,
	Alexandre TORGUE, Russell King, rtc-linux, devicetree,
	linux-arm-kernel, linux-kernel, Gabriel FERNANDEZ


On 01/11/2017 11:17 AM, Alexandre Belloni wrote:
> On 11/01/2017 at 11:07:16 +0100, Amelie DELAUNAY wrote :
>>> This will never happen, tm is already checked multiple times (up to
>>> three) in the core before this function can be called.
>>>
>> You're right. I'll remove all rtc_valid_tm calls.
>
> You can keep the one in read_time
>
Even if rtc_valid_tm is called just after rtc->ops->read_time() in 
__rtc_read_time ?

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCHv3 3/8] rtc: add STM32 RTC driver
  2017-01-11 10:42         ` Amelie DELAUNAY
@ 2017-01-11 10:50           ` Alexandre Belloni
  0 siblings, 0 replies; 18+ messages in thread
From: Alexandre Belloni @ 2017-01-11 10:50 UTC (permalink / raw)
  To: Amelie DELAUNAY
  Cc: Alessandro Zummo, Rob Herring, Mark Rutland, Maxime Coquelin,
	Alexandre TORGUE, Russell King, rtc-linux, devicetree,
	linux-arm-kernel, linux-kernel, Gabriel FERNANDEZ

On 11/01/2017 at 11:42:50 +0100, Amelie DELAUNAY wrote :
> 
> On 01/11/2017 11:17 AM, Alexandre Belloni wrote:
> > On 11/01/2017 at 11:07:16 +0100, Amelie DELAUNAY wrote :
> > > > This will never happen, tm is already checked multiple times (up to
> > > > three) in the core before this function can be called.
> > > > 
> > > You're right. I'll remove all rtc_valid_tm calls.
> > 
> > You can keep the one in read_time
> > 
> Even if rtc_valid_tm is called just after rtc->ops->read_time() in
> __rtc_read_time ?

Ah yes, I forgot it was added, you can remove all of them.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCHv3 2/8] dt-bindings: document the STM32 RTC bindings
  2017-01-05 13:43 ` [PATCHv3 2/8] dt-bindings: document the STM32 RTC bindings Amelie Delaunay
@ 2017-01-13  0:39   ` Alexandre Belloni
  0 siblings, 0 replies; 18+ messages in thread
From: Alexandre Belloni @ 2017-01-13  0:39 UTC (permalink / raw)
  To: Amelie Delaunay
  Cc: Alessandro Zummo, Rob Herring, Mark Rutland, Maxime Coquelin,
	Alexandre Torgue, Russell King, rtc-linux, devicetree,
	linux-arm-kernel, linux-kernel, Gabriel Fernandez

On 05/01/2017 at 14:43:23 +0100, Amelie Delaunay wrote :
> This patch adds documentation of device tree bindings for the STM32 RTC.
> 
> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>  .../devicetree/bindings/rtc/st,stm32-rtc.txt       | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
> 
Applied, thanks.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [PATCHv3 8/8] ARM: configs: stm32: Add RTC support in STM32 defconfig
  2017-01-05 13:43 ` [PATCHv3 8/8] ARM: configs: stm32: Add RTC support in STM32 defconfig Amelie Delaunay
@ 2017-01-16 14:37   ` Alexandre Torgue
  0 siblings, 0 replies; 18+ messages in thread
From: Alexandre Torgue @ 2017-01-16 14:37 UTC (permalink / raw)
  To: Amelie Delaunay, Alessandro Zummo, Alexandre Belloni,
	Rob Herring, Mark Rutland, Maxime Coquelin, Russell King
  Cc: rtc-linux, devicetree, linux-arm-kernel, linux-kernel, Gabriel Fernandez

Hi Amélie,

On 01/05/2017 02:43 PM, Amelie Delaunay wrote:
> This patch adds STM32 RTC support in stm32_defconfig file.
>
> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
> ---
>  arch/arm/configs/stm32_defconfig | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
> index be19e09..0acff9e 100644
> --- a/arch/arm/configs/stm32_defconfig
> +++ b/arch/arm/configs/stm32_defconfig
> @@ -57,6 +57,8 @@ CONFIG_LEDS_CLASS=y
>  CONFIG_LEDS_GPIO=y
>  CONFIG_LEDS_TRIGGERS=y
>  CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_STM32=y
>  CONFIG_DMADEVICES=y
>  CONFIG_STM32_DMA=y
>  # CONFIG_FILE_LOCKING is not set
>
Applied on stm32-defconfig-for-v4.11

thanks
Alex

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2017-01-16 14:38 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-05 13:43 [PATCHv3 0/8] Add support for STM32 RTC Amelie Delaunay
2017-01-05 13:43 ` [PATCHv3 1/8] ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429 Amelie Delaunay
2017-01-05 13:43 ` [PATCHv3 2/8] dt-bindings: document the STM32 RTC bindings Amelie Delaunay
2017-01-13  0:39   ` Alexandre Belloni
2017-01-05 13:43 ` [PATCHv3 3/8] rtc: add STM32 RTC driver Amelie Delaunay
2017-01-05 17:33   ` Mathieu Poirier
2017-01-09 16:46     ` Amelie DELAUNAY
2017-01-11  0:08   ` Alexandre Belloni
2017-01-11 10:07     ` Amelie DELAUNAY
2017-01-11 10:17       ` Alexandre Belloni
2017-01-11 10:42         ` Amelie DELAUNAY
2017-01-11 10:50           ` Alexandre Belloni
2017-01-05 13:43 ` [PATCHv3 4/8] ARM: dts: stm32: Add RTC support for STM32F429 MCU Amelie Delaunay
2017-01-05 13:43 ` [PATCHv3 5/8] ARM: dts: stm32: enable RTC on stm32f429-disco Amelie Delaunay
2017-01-05 13:43 ` [PATCHv3 6/8] ARM: dts: stm32: enable RTC on stm32f469-disco Amelie Delaunay
2017-01-05 13:43 ` [PATCHv3 7/8] ARM: dts: stm32: enable RTC on stm32429i-eval Amelie Delaunay
2017-01-05 13:43 ` [PATCHv3 8/8] ARM: configs: stm32: Add RTC support in STM32 defconfig Amelie Delaunay
2017-01-16 14:37   ` Alexandre Torgue

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).