linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/2] fix deadlock caused by recursive cluster locking
@ 2017-01-05 15:31 Eric Ren
  2017-01-05 15:31 ` [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock Eric Ren
  2017-01-05 15:31 ` [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points Eric Ren
  0 siblings, 2 replies; 32+ messages in thread
From: Eric Ren @ 2017-01-05 15:31 UTC (permalink / raw)
  To: ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, jiangqi903, zren, linux-kernel

This is a formal patch set to solve the deadlock issue on which I
previously started a RFC (draft patch), and the discussion happened here:
[https://oss.oracle.com/pipermail/ocfs2-devel/2016-October/012455.html]

Compared to the previous draft patch, this one is much simple and neat. 
It neither messes up the dlmglue core, nor has a performance penalty on
the whole cluster locking system. Instead, it is only used in places where
such recursive cluster locking may happen.

Your comments and feedbacks are always welcomed.

Eric Ren (2):
  ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  ocfs2: fix deadlocks when taking inode lock at vfs entry points

 fs/ocfs2/acl.c     | 39 ++++++++++++++++++++++++++++++++++-----
 fs/ocfs2/dlmglue.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
 fs/ocfs2/dlmglue.h | 18 ++++++++++++++++++
 fs/ocfs2/file.c    | 44 ++++++++++++++++++++++++++++++++++----------
 fs/ocfs2/ocfs2.h   |  1 +
 5 files changed, 131 insertions(+), 18 deletions(-)

-- 
2.6.6

^ permalink raw reply	[flat|nested] 32+ messages in thread

* [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  2017-01-05 15:31 [PATCH 0/2] fix deadlock caused by recursive cluster locking Eric Ren
@ 2017-01-05 15:31 ` Eric Ren
  2017-01-06  6:07   ` Joseph Qi
  2017-01-13  3:59   ` Junxiao Bi
  2017-01-05 15:31 ` [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points Eric Ren
  1 sibling, 2 replies; 32+ messages in thread
From: Eric Ren @ 2017-01-05 15:31 UTC (permalink / raw)
  To: ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, jiangqi903, zren, linux-kernel

We are in the situation that we have to avoid recursive cluster locking,
but there is no way to check if a cluster lock has been taken by a
precess already.

Mostly, we can avoid recursive locking by writing code carefully.
However, we found that it's very hard to handle the routines that
are invoked directly by vfs code. For instance:

const struct inode_operations ocfs2_file_iops = {
    .permission     = ocfs2_permission,
    .get_acl        = ocfs2_iop_get_acl,
    .set_acl        = ocfs2_iop_set_acl,
};

Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):
do_sys_open
 may_open
  inode_permission
   ocfs2_permission
    ocfs2_inode_lock() <=== first time
     generic_permission
      get_acl
       ocfs2_iop_get_acl
	ocfs2_inode_lock() <=== recursive one

A deadlock will occur if a remote EX request comes in between two
of ocfs2_inode_lock(). Briefly describe how the deadlock is formed:

On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
BAST(ocfs2_generic_handle_bast) when downconvert is started
on behalf of the remote EX lock request. Another hand, the recursive
cluster lock (the second one) will be blocked in in __ocfs2_cluster_lock()
because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why?
because there is no chance for the first cluster lock on this node to be
unlocked - we block ourselves in the code path.

The idea to fix this issue is mostly taken from gfs2 code.
1. introduce a new field: struct ocfs2_lock_res.l_holders, to
keep track of the processes' pid  who has taken the cluster lock
of this lock resource;
2. introduce a new flag for ocfs2_inode_lock_full: OCFS2_META_LOCK_GETBH;
it means just getting back disk inode bh for us if we've got cluster lock.
3. export a helper: ocfs2_is_locked_by_me() is used to check if we
have got the cluster lock in the upper code path.

The tracking logic should be used by some of the ocfs2 vfs's callbacks,
to solve the recursive locking issue cuased by the fact that vfs routines
can call into each other.

The performance penalty of processing the holder list should only be seen
at a few cases where the tracking logic is used, such as get/set acl.

You may ask what if the first time we got a PR lock, and the second time
we want a EX lock? fortunately, this case never happens in the real world,
as far as I can see, including permission check, (get|set)_(acl|attr), and
the gfs2 code also do so.

Signed-off-by: Eric Ren <zren@suse.com>
---
 fs/ocfs2/dlmglue.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
 fs/ocfs2/dlmglue.h | 18 ++++++++++++++++++
 fs/ocfs2/ocfs2.h   |  1 +
 3 files changed, 63 insertions(+), 3 deletions(-)

diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 83d576f..500bda4 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -532,6 +532,7 @@ void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res)
 	init_waitqueue_head(&res->l_event);
 	INIT_LIST_HEAD(&res->l_blocked_list);
 	INIT_LIST_HEAD(&res->l_mask_waiters);
+	INIT_LIST_HEAD(&res->l_holders);
 }
 
 void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res,
@@ -749,6 +750,45 @@ void ocfs2_lock_res_free(struct ocfs2_lock_res *res)
 	res->l_flags = 0UL;
 }
 
+inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
+				   struct ocfs2_holder *oh)
+{
+	INIT_LIST_HEAD(&oh->oh_list);
+	oh->oh_owner_pid =  get_pid(task_pid(current));
+
+	spin_lock(&lockres->l_lock);
+	list_add_tail(&oh->oh_list, &lockres->l_holders);
+	spin_unlock(&lockres->l_lock);
+}
+
+inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
+				       struct ocfs2_holder *oh)
+{
+	spin_lock(&lockres->l_lock);
+	list_del(&oh->oh_list);
+	spin_unlock(&lockres->l_lock);
+
+	put_pid(oh->oh_owner_pid);
+}
+
+inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres)
+{
+	struct ocfs2_holder *oh;
+	struct pid *pid;
+
+	/* look in the list of holders for one with the current task as owner */
+	spin_lock(&lockres->l_lock);
+	pid = task_pid(current);
+	list_for_each_entry(oh, &lockres->l_holders, oh_list) {
+		if (oh->oh_owner_pid == pid)
+			goto out;
+	}
+	oh = NULL;
+out:
+	spin_unlock(&lockres->l_lock);
+	return oh;
+}
+
 static inline void ocfs2_inc_holders(struct ocfs2_lock_res *lockres,
 				     int level)
 {
@@ -2333,8 +2373,9 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
 		goto getbh;
 	}
 
-	if (ocfs2_mount_local(osb))
-		goto local;
+	if ((arg_flags & OCFS2_META_LOCK_GETBH) ||
+	    ocfs2_mount_local(osb))
+		goto update;
 
 	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
 		ocfs2_wait_for_recovery(osb);
@@ -2363,7 +2404,7 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
 	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
 		ocfs2_wait_for_recovery(osb);
 
-local:
+update:
 	/*
 	 * We only see this flag if we're being called from
 	 * ocfs2_read_locked_inode(). It means we're locking an inode
diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
index d293a22..d65ff1e 100644
--- a/fs/ocfs2/dlmglue.h
+++ b/fs/ocfs2/dlmglue.h
@@ -70,6 +70,11 @@ struct ocfs2_orphan_scan_lvb {
 	__be32	lvb_os_seqno;
 };
 
+struct ocfs2_holder {
+	struct list_head oh_list;
+	struct pid *oh_owner_pid;
+};
+
 /* ocfs2_inode_lock_full() 'arg_flags' flags */
 /* don't wait on recovery. */
 #define OCFS2_META_LOCK_RECOVERY	(0x01)
@@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
 #define OCFS2_META_LOCK_NOQUEUE		(0x02)
 /* don't block waiting for the downconvert thread, instead return -EAGAIN */
 #define OCFS2_LOCK_NONBLOCK		(0x04)
+/* just get back disk inode bh if we've got cluster lock. */
+#define OCFS2_META_LOCK_GETBH		(0x08)
 
 /* Locking subclasses of inode cluster lock */
 enum {
@@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug *dlm_debug);
 
 /* To set the locking protocol on module initialization */
 void ocfs2_set_locking_protocol(void);
+
+/*
+ * Keep a list of processes who have interest in a lockres.
+ * Note: this is now only uesed for check recursive cluster lock.
+ */
+inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
+			     struct ocfs2_holder *oh);
+inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
+			     struct ocfs2_holder *oh);
+inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
+
 #endif	/* DLMGLUE_H */
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 7e5958b..0c39d71 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -172,6 +172,7 @@ struct ocfs2_lock_res {
 
 	struct list_head         l_blocked_list;
 	struct list_head         l_mask_waiters;
+	struct list_head	 l_holders;
 
 	unsigned long		 l_flags;
 	char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
-- 
2.6.6

^ permalink raw reply related	[flat|nested] 32+ messages in thread

* [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-05 15:31 [PATCH 0/2] fix deadlock caused by recursive cluster locking Eric Ren
  2017-01-05 15:31 ` [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock Eric Ren
@ 2017-01-05 15:31 ` Eric Ren
  2017-01-06  6:09   ` Joseph Qi
                     ` (3 more replies)
  1 sibling, 4 replies; 32+ messages in thread
From: Eric Ren @ 2017-01-05 15:31 UTC (permalink / raw)
  To: ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, jiangqi903, zren, linux-kernel

Commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
results in a deadlock, as the author "Tariq Saeed" realized shortly
after the patch was merged. The discussion happened here
(https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html).

The reason why taking cluster inode lock at vfs entry points opens up
a self deadlock window, is explained in the previous patch of this
series.

So far, we have seen two different code paths that have this issue.
1. do_sys_open
     may_open
      inode_permission
       ocfs2_permission
        ocfs2_inode_lock() <=== take PR
         generic_permission
          get_acl
           ocfs2_iop_get_acl
            ocfs2_inode_lock() <=== take PR
2. fchmod|fchmodat
    chmod_common
     notify_change
      ocfs2_setattr <=== take EX
       posix_acl_chmod
        get_acl
         ocfs2_iop_get_acl <=== take PR
        ocfs2_iop_set_acl <=== take EX

Fixes them by adding the tracking logic (in the previous patch) for
these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
ocfs2_setattr().

Signed-off-by: Eric Ren <zren@suse.com>
---
 fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
 fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
 2 files changed, 68 insertions(+), 15 deletions(-)

diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
index bed1fcb..c539890 100644
--- a/fs/ocfs2/acl.c
+++ b/fs/ocfs2/acl.c
@@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, int type)
 {
 	struct buffer_head *bh = NULL;
 	int status = 0;
-
-	status = ocfs2_inode_lock(inode, &bh, 1);
+	int arg_flags = 0, has_locked;
+	struct ocfs2_holder oh;
+	struct ocfs2_lock_res *lockres;
+
+	lockres = &OCFS2_I(inode)->ip_inode_lockres;
+	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
+	if (has_locked)
+		arg_flags = OCFS2_META_LOCK_GETBH;
+	status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
 	if (status < 0) {
 		if (status != -ENOENT)
 			mlog_errno(status);
 		return status;
 	}
+	if (!has_locked)
+		ocfs2_add_holder(lockres, &oh);
+
 	status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
-	ocfs2_inode_unlock(inode, 1);
+
+	if (!has_locked) {
+		ocfs2_remove_holder(lockres, &oh);
+		ocfs2_inode_unlock(inode, 1);
+	}
 	brelse(bh);
+
 	return status;
 }
 
@@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, int type)
 	struct buffer_head *di_bh = NULL;
 	struct posix_acl *acl;
 	int ret;
+	int arg_flags = 0, has_locked;
+	struct ocfs2_holder oh;
+	struct ocfs2_lock_res *lockres;
 
 	osb = OCFS2_SB(inode->i_sb);
 	if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
 		return NULL;
-	ret = ocfs2_inode_lock(inode, &di_bh, 0);
+
+	lockres = &OCFS2_I(inode)->ip_inode_lockres;
+	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
+	if (has_locked)
+		arg_flags = OCFS2_META_LOCK_GETBH;
+	ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
 	if (ret < 0) {
 		if (ret != -ENOENT)
 			mlog_errno(ret);
 		return ERR_PTR(ret);
 	}
+	if (!has_locked)
+		ocfs2_add_holder(lockres, &oh);
 
 	acl = ocfs2_get_acl_nolock(inode, type, di_bh);
 
-	ocfs2_inode_unlock(inode, 0);
+	if (!has_locked) {
+		ocfs2_remove_holder(lockres, &oh);
+		ocfs2_inode_unlock(inode, 0);
+	}
 	brelse(di_bh);
+
 	return acl;
 }
 
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index c488965..62be75d 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 	handle_t *handle = NULL;
 	struct dquot *transfer_to[MAXQUOTAS] = { };
 	int qtype;
+	int arg_flags = 0, had_lock;
+	struct ocfs2_holder oh;
+	struct ocfs2_lock_res *lockres;
 
 	trace_ocfs2_setattr(inode, dentry,
 			    (unsigned long long)OCFS2_I(inode)->ip_blkno,
@@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 		}
 	}
 
-	status = ocfs2_inode_lock(inode, &bh, 1);
+	lockres = &OCFS2_I(inode)->ip_inode_lockres;
+	had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
+	if (had_lock)
+		arg_flags = OCFS2_META_LOCK_GETBH;
+	status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
 	if (status < 0) {
 		if (status != -ENOENT)
 			mlog_errno(status);
 		goto bail_unlock_rw;
 	}
-	inode_locked = 1;
+	if (!had_lock) {
+		ocfs2_add_holder(lockres, &oh);
+		inode_locked = 1;
+	}
 
 	if (size_change) {
 		status = inode_newsize_ok(inode, attr->ia_size);
@@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 bail_commit:
 	ocfs2_commit_trans(osb, handle);
 bail_unlock:
-	if (status) {
+	if (status && inode_locked) {
+		ocfs2_remove_holder(lockres, &oh);
 		ocfs2_inode_unlock(inode, 1);
 		inode_locked = 0;
 	}
@@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 		if (status < 0)
 			mlog_errno(status);
 	}
-	if (inode_locked)
+	if (inode_locked) {
+		ocfs2_remove_holder(lockres, &oh);
 		ocfs2_inode_unlock(inode, 1);
+	}
 
 	brelse(bh);
 	return status;
@@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
 int ocfs2_permission(struct inode *inode, int mask)
 {
 	int ret;
+	int has_locked;
+	struct ocfs2_holder oh;
+	struct ocfs2_lock_res *lockres;
 
 	if (mask & MAY_NOT_BLOCK)
 		return -ECHILD;
 
-	ret = ocfs2_inode_lock(inode, NULL, 0);
-	if (ret) {
-		if (ret != -ENOENT)
-			mlog_errno(ret);
-		goto out;
+	lockres = &OCFS2_I(inode)->ip_inode_lockres;
+	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
+	if (!has_locked) {
+		ret = ocfs2_inode_lock(inode, NULL, 0);
+		if (ret) {
+			if (ret != -ENOENT)
+				mlog_errno(ret);
+			goto out;
+		}
+		ocfs2_add_holder(lockres, &oh);
 	}
 
 	ret = generic_permission(inode, mask);
 
-	ocfs2_inode_unlock(inode, 0);
+	if (!has_locked) {
+		ocfs2_remove_holder(lockres, &oh);
+		ocfs2_inode_unlock(inode, 0);
+	}
 out:
 	return ret;
 }
-- 
2.6.6

^ permalink raw reply related	[flat|nested] 32+ messages in thread

* Re: [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  2017-01-05 15:31 ` [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock Eric Ren
@ 2017-01-06  6:07   ` Joseph Qi
  2017-01-06  7:03     ` Eric Ren
  2017-01-13  3:59   ` Junxiao Bi
  1 sibling, 1 reply; 32+ messages in thread
From: Joseph Qi @ 2017-01-06  6:07 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

Hi Eric,


On 17/1/5 23:31, Eric Ren wrote:
> We are in the situation that we have to avoid recursive cluster locking,
> but there is no way to check if a cluster lock has been taken by a
> precess already.
>
> Mostly, we can avoid recursive locking by writing code carefully.
> However, we found that it's very hard to handle the routines that
> are invoked directly by vfs code. For instance:
>
> const struct inode_operations ocfs2_file_iops = {
>      .permission     = ocfs2_permission,
>      .get_acl        = ocfs2_iop_get_acl,
>      .set_acl        = ocfs2_iop_set_acl,
> };
>
> Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):
> do_sys_open
>   may_open
>    inode_permission
>     ocfs2_permission
>      ocfs2_inode_lock() <=== first time
>       generic_permission
>        get_acl
>         ocfs2_iop_get_acl
> 	ocfs2_inode_lock() <=== recursive one
>
> A deadlock will occur if a remote EX request comes in between two
> of ocfs2_inode_lock(). Briefly describe how the deadlock is formed:
>
> On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
> BAST(ocfs2_generic_handle_bast) when downconvert is started
> on behalf of the remote EX lock request. Another hand, the recursive
> cluster lock (the second one) will be blocked in in __ocfs2_cluster_lock()
> because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why?
> because there is no chance for the first cluster lock on this node to be
> unlocked - we block ourselves in the code path.
>
> The idea to fix this issue is mostly taken from gfs2 code.
> 1. introduce a new field: struct ocfs2_lock_res.l_holders, to
> keep track of the processes' pid  who has taken the cluster lock
> of this lock resource;
> 2. introduce a new flag for ocfs2_inode_lock_full: OCFS2_META_LOCK_GETBH;
> it means just getting back disk inode bh for us if we've got cluster lock.
> 3. export a helper: ocfs2_is_locked_by_me() is used to check if we
> have got the cluster lock in the upper code path.
>
> The tracking logic should be used by some of the ocfs2 vfs's callbacks,
> to solve the recursive locking issue cuased by the fact that vfs routines
> can call into each other.
>
> The performance penalty of processing the holder list should only be seen
> at a few cases where the tracking logic is used, such as get/set acl.
>
> You may ask what if the first time we got a PR lock, and the second time
> we want a EX lock? fortunately, this case never happens in the real world,
> as far as I can see, including permission check, (get|set)_(acl|attr), and
> the gfs2 code also do so.
>
> Signed-off-by: Eric Ren <zren@suse.com>
> ---
>   fs/ocfs2/dlmglue.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
>   fs/ocfs2/dlmglue.h | 18 ++++++++++++++++++
>   fs/ocfs2/ocfs2.h   |  1 +
>   3 files changed, 63 insertions(+), 3 deletions(-)
>
> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
> index 83d576f..500bda4 100644
> --- a/fs/ocfs2/dlmglue.c
> +++ b/fs/ocfs2/dlmglue.c
> @@ -532,6 +532,7 @@ void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res)
>   	init_waitqueue_head(&res->l_event);
>   	INIT_LIST_HEAD(&res->l_blocked_list);
>   	INIT_LIST_HEAD(&res->l_mask_waiters);
> +	INIT_LIST_HEAD(&res->l_holders);
>   }
>   
>   void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res,
> @@ -749,6 +750,45 @@ void ocfs2_lock_res_free(struct ocfs2_lock_res *res)
>   	res->l_flags = 0UL;
>   }
>   
> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
> +				   struct ocfs2_holder *oh)
> +{
> +	INIT_LIST_HEAD(&oh->oh_list);
> +	oh->oh_owner_pid =  get_pid(task_pid(current));
> +
> +	spin_lock(&lockres->l_lock);
> +	list_add_tail(&oh->oh_list, &lockres->l_holders);
> +	spin_unlock(&lockres->l_lock);
> +}
> +
> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
> +				       struct ocfs2_holder *oh)
> +{
> +	spin_lock(&lockres->l_lock);
> +	list_del(&oh->oh_list);
> +	spin_unlock(&lockres->l_lock);
> +
> +	put_pid(oh->oh_owner_pid);
> +}
> +
> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres)
> +{
> +	struct ocfs2_holder *oh;
> +	struct pid *pid;
> +
> +	/* look in the list of holders for one with the current task as owner */
> +	spin_lock(&lockres->l_lock);
> +	pid = task_pid(current);
> +	list_for_each_entry(oh, &lockres->l_holders, oh_list) {
> +		if (oh->oh_owner_pid == pid)
> +			goto out;
> +	}
> +	oh = NULL;
> +out:
> +	spin_unlock(&lockres->l_lock);
> +	return oh;
> +}
Since this ocfs2_holder won't be used in the caller, I suggest just 
return a bool value here.
Something like:
spin_lock();
list_for_each_entry() {
     if (oh->oh_owner_pid == pid) {
         spin_unlock();
         return 1;
     }
}
spin_unlock();
return 0;

Thanks,
Joseph
> +
>   static inline void ocfs2_inc_holders(struct ocfs2_lock_res *lockres,
>   				     int level)
>   {
> @@ -2333,8 +2373,9 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>   		goto getbh;
>   	}
>   
> -	if (ocfs2_mount_local(osb))
> -		goto local;
> +	if ((arg_flags & OCFS2_META_LOCK_GETBH) ||
> +	    ocfs2_mount_local(osb))
> +		goto update;
>   
>   	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>   		ocfs2_wait_for_recovery(osb);
> @@ -2363,7 +2404,7 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>   	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>   		ocfs2_wait_for_recovery(osb);
>   
> -local:
> +update:
>   	/*
>   	 * We only see this flag if we're being called from
>   	 * ocfs2_read_locked_inode(). It means we're locking an inode
> diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
> index d293a22..d65ff1e 100644
> --- a/fs/ocfs2/dlmglue.h
> +++ b/fs/ocfs2/dlmglue.h
> @@ -70,6 +70,11 @@ struct ocfs2_orphan_scan_lvb {
>   	__be32	lvb_os_seqno;
>   };
>   
> +struct ocfs2_holder {
> +	struct list_head oh_list;
> +	struct pid *oh_owner_pid;
> +};
> +
>   /* ocfs2_inode_lock_full() 'arg_flags' flags */
>   /* don't wait on recovery. */
>   #define OCFS2_META_LOCK_RECOVERY	(0x01)
> @@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
>   #define OCFS2_META_LOCK_NOQUEUE		(0x02)
>   /* don't block waiting for the downconvert thread, instead return -EAGAIN */
>   #define OCFS2_LOCK_NONBLOCK		(0x04)
> +/* just get back disk inode bh if we've got cluster lock. */
> +#define OCFS2_META_LOCK_GETBH		(0x08)
>   
>   /* Locking subclasses of inode cluster lock */
>   enum {
> @@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug *dlm_debug);
>   
>   /* To set the locking protocol on module initialization */
>   void ocfs2_set_locking_protocol(void);
> +
> +/*
> + * Keep a list of processes who have interest in a lockres.
> + * Note: this is now only uesed for check recursive cluster lock.
> + */
> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
> +			     struct ocfs2_holder *oh);
> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
> +			     struct ocfs2_holder *oh);
> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
> +
>   #endif	/* DLMGLUE_H */
> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
> index 7e5958b..0c39d71 100644
> --- a/fs/ocfs2/ocfs2.h
> +++ b/fs/ocfs2/ocfs2.h
> @@ -172,6 +172,7 @@ struct ocfs2_lock_res {
>   
>   	struct list_head         l_blocked_list;
>   	struct list_head         l_mask_waiters;
> +	struct list_head	 l_holders;
>   
>   	unsigned long		 l_flags;
>   	char                     l_name[OCFS2_LOCK_ID_MAX_LEN];

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-05 15:31 ` [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points Eric Ren
@ 2017-01-06  6:09   ` Joseph Qi
  2017-01-06  6:56     ` Eric Ren
  2017-01-06 14:52   ` kbuild test robot
                     ` (2 subsequent siblings)
  3 siblings, 1 reply; 32+ messages in thread
From: Joseph Qi @ 2017-01-06  6:09 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

Hi Eric,


On 17/1/5 23:31, Eric Ren wrote:
> Commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
> results in a deadlock, as the author "Tariq Saeed" realized shortly
> after the patch was merged. The discussion happened here
> (https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html).
>
> The reason why taking cluster inode lock at vfs entry points opens up
> a self deadlock window, is explained in the previous patch of this
> series.
>
> So far, we have seen two different code paths that have this issue.
> 1. do_sys_open
>       may_open
>        inode_permission
>         ocfs2_permission
>          ocfs2_inode_lock() <=== take PR
>           generic_permission
>            get_acl
>             ocfs2_iop_get_acl
>              ocfs2_inode_lock() <=== take PR
> 2. fchmod|fchmodat
>      chmod_common
>       notify_change
>        ocfs2_setattr <=== take EX
>         posix_acl_chmod
>          get_acl
>           ocfs2_iop_get_acl <=== take PR
>          ocfs2_iop_set_acl <=== take EX
>
> Fixes them by adding the tracking logic (in the previous patch) for
> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
> ocfs2_setattr().
As described cases above, shall we just add the tracking logic only for 
set/get_acl()?

Thanks,
Joseph
>
> Signed-off-by: Eric Ren <zren@suse.com>
> ---
>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>   2 files changed, 68 insertions(+), 15 deletions(-)
>
> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
> index bed1fcb..c539890 100644
> --- a/fs/ocfs2/acl.c
> +++ b/fs/ocfs2/acl.c
> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, int type)
>   {
>   	struct buffer_head *bh = NULL;
>   	int status = 0;
> -
> -	status = ocfs2_inode_lock(inode, &bh, 1);
> +	int arg_flags = 0, has_locked;
> +	struct ocfs2_holder oh;
> +	struct ocfs2_lock_res *lockres;
> +
> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
> +	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
> +	if (has_locked)
> +		arg_flags = OCFS2_META_LOCK_GETBH;
> +	status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>   	if (status < 0) {
>   		if (status != -ENOENT)
>   			mlog_errno(status);
>   		return status;
>   	}
> +	if (!has_locked)
> +		ocfs2_add_holder(lockres, &oh);
> +
>   	status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
> -	ocfs2_inode_unlock(inode, 1);
> +
> +	if (!has_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
> +		ocfs2_inode_unlock(inode, 1);
> +	}
>   	brelse(bh);
> +
>   	return status;
>   }
>   
> @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, int type)
>   	struct buffer_head *di_bh = NULL;
>   	struct posix_acl *acl;
>   	int ret;
> +	int arg_flags = 0, has_locked;
> +	struct ocfs2_holder oh;
> +	struct ocfs2_lock_res *lockres;
>   
>   	osb = OCFS2_SB(inode->i_sb);
>   	if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>   		return NULL;
> -	ret = ocfs2_inode_lock(inode, &di_bh, 0);
> +
> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
> +	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
> +	if (has_locked)
> +		arg_flags = OCFS2_META_LOCK_GETBH;
> +	ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>   	if (ret < 0) {
>   		if (ret != -ENOENT)
>   			mlog_errno(ret);
>   		return ERR_PTR(ret);
>   	}
> +	if (!has_locked)
> +		ocfs2_add_holder(lockres, &oh);
>   
>   	acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>   
> -	ocfs2_inode_unlock(inode, 0);
> +	if (!has_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
> +		ocfs2_inode_unlock(inode, 0);
> +	}
>   	brelse(di_bh);
> +
>   	return acl;
>   }
>   
> diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
> index c488965..62be75d 100644
> --- a/fs/ocfs2/file.c
> +++ b/fs/ocfs2/file.c
> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>   	handle_t *handle = NULL;
>   	struct dquot *transfer_to[MAXQUOTAS] = { };
>   	int qtype;
> +	int arg_flags = 0, had_lock;
> +	struct ocfs2_holder oh;
> +	struct ocfs2_lock_res *lockres;
>   
>   	trace_ocfs2_setattr(inode, dentry,
>   			    (unsigned long long)OCFS2_I(inode)->ip_blkno,
> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>   		}
>   	}
>   
> -	status = ocfs2_inode_lock(inode, &bh, 1);
> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
> +	had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
> +	if (had_lock)
> +		arg_flags = OCFS2_META_LOCK_GETBH;
> +	status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>   	if (status < 0) {
>   		if (status != -ENOENT)
>   			mlog_errno(status);
>   		goto bail_unlock_rw;
>   	}
> -	inode_locked = 1;
> +	if (!had_lock) {
> +		ocfs2_add_holder(lockres, &oh);
> +		inode_locked = 1;
> +	}
>   
>   	if (size_change) {
>   		status = inode_newsize_ok(inode, attr->ia_size);
> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>   bail_commit:
>   	ocfs2_commit_trans(osb, handle);
>   bail_unlock:
> -	if (status) {
> +	if (status && inode_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
>   		ocfs2_inode_unlock(inode, 1);
>   		inode_locked = 0;
>   	}
> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>   		if (status < 0)
>   			mlog_errno(status);
>   	}
> -	if (inode_locked)
> +	if (inode_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
>   		ocfs2_inode_unlock(inode, 1);
> +	}
>   
>   	brelse(bh);
>   	return status;
> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>   int ocfs2_permission(struct inode *inode, int mask)
>   {
>   	int ret;
> +	int has_locked;
> +	struct ocfs2_holder oh;
> +	struct ocfs2_lock_res *lockres;
>   
>   	if (mask & MAY_NOT_BLOCK)
>   		return -ECHILD;
>   
> -	ret = ocfs2_inode_lock(inode, NULL, 0);
> -	if (ret) {
> -		if (ret != -ENOENT)
> -			mlog_errno(ret);
> -		goto out;
> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
> +	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
> +	if (!has_locked) {
> +		ret = ocfs2_inode_lock(inode, NULL, 0);
> +		if (ret) {
> +			if (ret != -ENOENT)
> +				mlog_errno(ret);
> +			goto out;
> +		}
> +		ocfs2_add_holder(lockres, &oh);
>   	}
>   
>   	ret = generic_permission(inode, mask);
>   
> -	ocfs2_inode_unlock(inode, 0);
> +	if (!has_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
> +		ocfs2_inode_unlock(inode, 0);
> +	}
>   out:
>   	return ret;
>   }

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-06  6:09   ` Joseph Qi
@ 2017-01-06  6:56     ` Eric Ren
  2017-01-06  7:14       ` Joseph Qi
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-06  6:56 UTC (permalink / raw)
  To: Joseph Qi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

On 01/06/2017 02:09 PM, Joseph Qi wrote:
> Hi Eric,
>
>
> On 17/1/5 23:31, Eric Ren wrote:
>> Commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
>> results in a deadlock, as the author "Tariq Saeed" realized shortly
>> after the patch was merged. The discussion happened here
>> (https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html).
>>
>> The reason why taking cluster inode lock at vfs entry points opens up
>> a self deadlock window, is explained in the previous patch of this
>> series.
>>
>> So far, we have seen two different code paths that have this issue.
>> 1. do_sys_open
>>       may_open
>>        inode_permission
>>         ocfs2_permission
>>          ocfs2_inode_lock() <=== take PR
>>           generic_permission
>>            get_acl
>>             ocfs2_iop_get_acl
>>              ocfs2_inode_lock() <=== take PR
>> 2. fchmod|fchmodat
>>      chmod_common
>>       notify_change
>>        ocfs2_setattr <=== take EX
>>         posix_acl_chmod
>>          get_acl
>>           ocfs2_iop_get_acl <=== take PR
>>          ocfs2_iop_set_acl <=== take EX
>>
>> Fixes them by adding the tracking logic (in the previous patch) for
>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>> ocfs2_setattr().
> As described cases above, shall we just add the tracking logic only for set/get_acl()?

The idea is to detect recursive locking on the running task stack. Take case 1) for example 
if ocfs2_permisssion()
is not changed:

ocfs2_permission() <=== take PR, ocfs2_holder is not added
    ocfs2_iop_get_acl <=== still take PR, because there is no lock holder on the tracking list

Thanks for your review;-)
Eric

>
> Thanks,
> Joseph
>>
>> Signed-off-by: Eric Ren <zren@suse.com>
>> ---
>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>
>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>> index bed1fcb..c539890 100644
>> --- a/fs/ocfs2/acl.c
>> +++ b/fs/ocfs2/acl.c
>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, 
>> int type)
>>   {
>>       struct buffer_head *bh = NULL;
>>       int status = 0;
>> -
>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>> +    int arg_flags = 0, has_locked;
>> +    struct ocfs2_holder oh;
>> +    struct ocfs2_lock_res *lockres;
>> +
>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>> +    if (has_locked)
>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>       if (status < 0) {
>>           if (status != -ENOENT)
>>               mlog_errno(status);
>>           return status;
>>       }
>> +    if (!has_locked)
>> +        ocfs2_add_holder(lockres, &oh);
>> +
>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
>> -    ocfs2_inode_unlock(inode, 1);
>> +
>> +    if (!has_locked) {
>> +        ocfs2_remove_holder(lockres, &oh);
>> +        ocfs2_inode_unlock(inode, 1);
>> +    }
>>       brelse(bh);
>> +
>>       return status;
>>   }
>>   @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, int type)
>>       struct buffer_head *di_bh = NULL;
>>       struct posix_acl *acl;
>>       int ret;
>> +    int arg_flags = 0, has_locked;
>> +    struct ocfs2_holder oh;
>> +    struct ocfs2_lock_res *lockres;
>>         osb = OCFS2_SB(inode->i_sb);
>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>           return NULL;
>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>> +
>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>> +    if (has_locked)
>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>       if (ret < 0) {
>>           if (ret != -ENOENT)
>>               mlog_errno(ret);
>>           return ERR_PTR(ret);
>>       }
>> +    if (!has_locked)
>> +        ocfs2_add_holder(lockres, &oh);
>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>   -    ocfs2_inode_unlock(inode, 0);
>> +    if (!has_locked) {
>> +        ocfs2_remove_holder(lockres, &oh);
>> +        ocfs2_inode_unlock(inode, 0);
>> +    }
>>       brelse(di_bh);
>> +
>>       return acl;
>>   }
>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>> index c488965..62be75d 100644
>> --- a/fs/ocfs2/file.c
>> +++ b/fs/ocfs2/file.c
>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>       handle_t *handle = NULL;
>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>       int qtype;
>> +    int arg_flags = 0, had_lock;
>> +    struct ocfs2_holder oh;
>> +    struct ocfs2_lock_res *lockres;
>>         trace_ocfs2_setattr(inode, dentry,
>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>           }
>>       }
>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>> +    if (had_lock)
>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>       if (status < 0) {
>>           if (status != -ENOENT)
>>               mlog_errno(status);
>>           goto bail_unlock_rw;
>>       }
>> -    inode_locked = 1;
>> +    if (!had_lock) {
>> +        ocfs2_add_holder(lockres, &oh);
>> +        inode_locked = 1;
>> +    }
>>         if (size_change) {
>>           status = inode_newsize_ok(inode, attr->ia_size);
>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>   bail_commit:
>>       ocfs2_commit_trans(osb, handle);
>>   bail_unlock:
>> -    if (status) {
>> +    if (status && inode_locked) {
>> +        ocfs2_remove_holder(lockres, &oh);
>>           ocfs2_inode_unlock(inode, 1);
>>           inode_locked = 0;
>>       }
>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>           if (status < 0)
>>               mlog_errno(status);
>>       }
>> -    if (inode_locked)
>> +    if (inode_locked) {
>> +        ocfs2_remove_holder(lockres, &oh);
>>           ocfs2_inode_unlock(inode, 1);
>> +    }
>>         brelse(bh);
>>       return status;
>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>   int ocfs2_permission(struct inode *inode, int mask)
>>   {
>>       int ret;
>> +    int has_locked;
>> +    struct ocfs2_holder oh;
>> +    struct ocfs2_lock_res *lockres;
>>         if (mask & MAY_NOT_BLOCK)
>>           return -ECHILD;
>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>> -    if (ret) {
>> -        if (ret != -ENOENT)
>> -            mlog_errno(ret);
>> -        goto out;
>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>> +    if (!has_locked) {
>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>> +        if (ret) {
>> +            if (ret != -ENOENT)
>> +                mlog_errno(ret);
>> +            goto out;
>> +        }
>> +        ocfs2_add_holder(lockres, &oh);
>>       }
>>         ret = generic_permission(inode, mask);
>>   -    ocfs2_inode_unlock(inode, 0);
>> +    if (!has_locked) {
>> +        ocfs2_remove_holder(lockres, &oh);
>> +        ocfs2_inode_unlock(inode, 0);
>> +    }
>>   out:
>>       return ret;
>>   }
>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  2017-01-06  6:07   ` Joseph Qi
@ 2017-01-06  7:03     ` Eric Ren
  2017-01-06  7:24       ` Joseph Qi
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-06  7:03 UTC (permalink / raw)
  To: Joseph Qi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

On 01/06/2017 02:07 PM, Joseph Qi wrote:
> Hi Eric,
>
>
> On 17/1/5 23:31, Eric Ren wrote:
>> We are in the situation that we have to avoid recursive cluster locking,
>> but there is no way to check if a cluster lock has been taken by a
>> precess already.
>>
>> Mostly, we can avoid recursive locking by writing code carefully.
>> However, we found that it's very hard to handle the routines that
>> are invoked directly by vfs code. For instance:
>>
>> const struct inode_operations ocfs2_file_iops = {
>>      .permission     = ocfs2_permission,
>>      .get_acl        = ocfs2_iop_get_acl,
>>      .set_acl        = ocfs2_iop_set_acl,
>> };
>>
>> Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):
>> do_sys_open
>>   may_open
>>    inode_permission
>>     ocfs2_permission
>>      ocfs2_inode_lock() <=== first time
>>       generic_permission
>>        get_acl
>>         ocfs2_iop_get_acl
>>     ocfs2_inode_lock() <=== recursive one
>>
>> A deadlock will occur if a remote EX request comes in between two
>> of ocfs2_inode_lock(). Briefly describe how the deadlock is formed:
>>
>> On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
>> BAST(ocfs2_generic_handle_bast) when downconvert is started
>> on behalf of the remote EX lock request. Another hand, the recursive
>> cluster lock (the second one) will be blocked in in __ocfs2_cluster_lock()
>> because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why?
>> because there is no chance for the first cluster lock on this node to be
>> unlocked - we block ourselves in the code path.
>>
>> The idea to fix this issue is mostly taken from gfs2 code.
>> 1. introduce a new field: struct ocfs2_lock_res.l_holders, to
>> keep track of the processes' pid  who has taken the cluster lock
>> of this lock resource;
>> 2. introduce a new flag for ocfs2_inode_lock_full: OCFS2_META_LOCK_GETBH;
>> it means just getting back disk inode bh for us if we've got cluster lock.
>> 3. export a helper: ocfs2_is_locked_by_me() is used to check if we
>> have got the cluster lock in the upper code path.
>>
>> The tracking logic should be used by some of the ocfs2 vfs's callbacks,
>> to solve the recursive locking issue cuased by the fact that vfs routines
>> can call into each other.
>>
>> The performance penalty of processing the holder list should only be seen
>> at a few cases where the tracking logic is used, such as get/set acl.
>>
>> You may ask what if the first time we got a PR lock, and the second time
>> we want a EX lock? fortunately, this case never happens in the real world,
>> as far as I can see, including permission check, (get|set)_(acl|attr), and
>> the gfs2 code also do so.
>>
>> Signed-off-by: Eric Ren <zren@suse.com>
>> ---
>>   fs/ocfs2/dlmglue.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
>>   fs/ocfs2/dlmglue.h | 18 ++++++++++++++++++
>>   fs/ocfs2/ocfs2.h   |  1 +
>>   3 files changed, 63 insertions(+), 3 deletions(-)
>>
>> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
>> index 83d576f..500bda4 100644
>> --- a/fs/ocfs2/dlmglue.c
>> +++ b/fs/ocfs2/dlmglue.c
>> @@ -532,6 +532,7 @@ void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res)
>>       init_waitqueue_head(&res->l_event);
>>       INIT_LIST_HEAD(&res->l_blocked_list);
>>       INIT_LIST_HEAD(&res->l_mask_waiters);
>> +    INIT_LIST_HEAD(&res->l_holders);
>>   }
>>     void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res,
>> @@ -749,6 +750,45 @@ void ocfs2_lock_res_free(struct ocfs2_lock_res *res)
>>       res->l_flags = 0UL;
>>   }
>>   +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>> +                   struct ocfs2_holder *oh)
>> +{
>> +    INIT_LIST_HEAD(&oh->oh_list);
>> +    oh->oh_owner_pid =  get_pid(task_pid(current));
>> +
>> +    spin_lock(&lockres->l_lock);
>> +    list_add_tail(&oh->oh_list, &lockres->l_holders);
>> +    spin_unlock(&lockres->l_lock);
>> +}
>> +
>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>> +                       struct ocfs2_holder *oh)
>> +{
>> +    spin_lock(&lockres->l_lock);
>> +    list_del(&oh->oh_list);
>> +    spin_unlock(&lockres->l_lock);
>> +
>> +    put_pid(oh->oh_owner_pid);
>> +}
>> +
>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres)
>> +{
>> +    struct ocfs2_holder *oh;
>> +    struct pid *pid;
>> +
>> +    /* look in the list of holders for one with the current task as owner */
>> +    spin_lock(&lockres->l_lock);
>> +    pid = task_pid(current);
>> +    list_for_each_entry(oh, &lockres->l_holders, oh_list) {
>> +        if (oh->oh_owner_pid == pid)
>> +            goto out;
>> +    }
>> +    oh = NULL;
>> +out:
>> +    spin_unlock(&lockres->l_lock);
>> +    return oh;
>> +}
> Since this ocfs2_holder won't be used in the caller, I suggest just return a bool value here.
> Something like:
> spin_lock();
> list_for_each_entry() {
>     if (oh->oh_owner_pid == pid) {
>         spin_unlock();
>         return 1;
>     }
> }
> spin_unlock();
> return 0;

Aha, you have the point. However, it is also reasonable to return the lock holder by the way.
When debugging with printk or crash, it's easy to get the pid of the holder without any further
analysis. So, I tend to keep it;-)

Thanks very much for your review!
Eric

>
> Thanks,
> Joseph
>> +
>>   static inline void ocfs2_inc_holders(struct ocfs2_lock_res *lockres,
>>                        int level)
>>   {
>> @@ -2333,8 +2373,9 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>>           goto getbh;
>>       }
>>   -    if (ocfs2_mount_local(osb))
>> -        goto local;
>> +    if ((arg_flags & OCFS2_META_LOCK_GETBH) ||
>> +        ocfs2_mount_local(osb))
>> +        goto update;
>>         if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>           ocfs2_wait_for_recovery(osb);
>> @@ -2363,7 +2404,7 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>>       if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>           ocfs2_wait_for_recovery(osb);
>>   -local:
>> +update:
>>       /*
>>        * We only see this flag if we're being called from
>>        * ocfs2_read_locked_inode(). It means we're locking an inode
>> diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
>> index d293a22..d65ff1e 100644
>> --- a/fs/ocfs2/dlmglue.h
>> +++ b/fs/ocfs2/dlmglue.h
>> @@ -70,6 +70,11 @@ struct ocfs2_orphan_scan_lvb {
>>       __be32    lvb_os_seqno;
>>   };
>>   +struct ocfs2_holder {
>> +    struct list_head oh_list;
>> +    struct pid *oh_owner_pid;
>> +};
>> +
>>   /* ocfs2_inode_lock_full() 'arg_flags' flags */
>>   /* don't wait on recovery. */
>>   #define OCFS2_META_LOCK_RECOVERY    (0x01)
>> @@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
>>   #define OCFS2_META_LOCK_NOQUEUE        (0x02)
>>   /* don't block waiting for the downconvert thread, instead return -EAGAIN */
>>   #define OCFS2_LOCK_NONBLOCK        (0x04)
>> +/* just get back disk inode bh if we've got cluster lock. */
>> +#define OCFS2_META_LOCK_GETBH        (0x08)
>>     /* Locking subclasses of inode cluster lock */
>>   enum {
>> @@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug *dlm_debug);
>>     /* To set the locking protocol on module initialization */
>>   void ocfs2_set_locking_protocol(void);
>> +
>> +/*
>> + * Keep a list of processes who have interest in a lockres.
>> + * Note: this is now only uesed for check recursive cluster lock.
>> + */
>> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>> +                 struct ocfs2_holder *oh);
>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>> +                 struct ocfs2_holder *oh);
>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
>> +
>>   #endif    /* DLMGLUE_H */
>> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
>> index 7e5958b..0c39d71 100644
>> --- a/fs/ocfs2/ocfs2.h
>> +++ b/fs/ocfs2/ocfs2.h
>> @@ -172,6 +172,7 @@ struct ocfs2_lock_res {
>>         struct list_head         l_blocked_list;
>>       struct list_head         l_mask_waiters;
>> +    struct list_head     l_holders;
>>         unsigned long         l_flags;
>>       char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-06  6:56     ` Eric Ren
@ 2017-01-06  7:14       ` Joseph Qi
  2017-01-06  8:21         ` Eric Ren
  0 siblings, 1 reply; 32+ messages in thread
From: Joseph Qi @ 2017-01-06  7:14 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel



On 17/1/6 14:56, Eric Ren wrote:
> On 01/06/2017 02:09 PM, Joseph Qi wrote:
>> Hi Eric,
>>
>>
>> On 17/1/5 23:31, Eric Ren wrote:
>>> Commit 743b5f1434f5 ("ocfs2: take inode lock in 
>>> ocfs2_iop_set/get_acl()")
>>> results in a deadlock, as the author "Tariq Saeed" realized shortly
>>> after the patch was merged. The discussion happened here
>>> (https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html). 
>>>
>>>
>>> The reason why taking cluster inode lock at vfs entry points opens up
>>> a self deadlock window, is explained in the previous patch of this
>>> series.
>>>
>>> So far, we have seen two different code paths that have this issue.
>>> 1. do_sys_open
>>>       may_open
>>>        inode_permission
>>>         ocfs2_permission
>>>          ocfs2_inode_lock() <=== take PR
>>>           generic_permission
>>>            get_acl
>>>             ocfs2_iop_get_acl
>>>              ocfs2_inode_lock() <=== take PR
>>> 2. fchmod|fchmodat
>>>      chmod_common
>>>       notify_change
>>>        ocfs2_setattr <=== take EX
>>>         posix_acl_chmod
>>>          get_acl
>>>           ocfs2_iop_get_acl <=== take PR
>>>          ocfs2_iop_set_acl <=== take EX
>>>
>>> Fixes them by adding the tracking logic (in the previous patch) for
>>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>>> ocfs2_setattr().
>> As described cases above, shall we just add the tracking logic only 
>> for set/get_acl()?
>
> The idea is to detect recursive locking on the running task stack. 
> Take case 1) for example if ocfs2_permisssion()
> is not changed:
>
> ocfs2_permission() <=== take PR, ocfs2_holder is not added
>    ocfs2_iop_get_acl <=== still take PR, because there is no lock 
> holder on the tracking list
I mean we have no need to check if locked by me, just do inode lock and 
add holder.
This will make code more clean, IMO.

Thanks,
Joseph
>
> Thanks for your review;-)
> Eric
>
>>
>> Thanks,
>> Joseph
>>>
>>> Signed-off-by: Eric Ren <zren@suse.com>
>>> ---
>>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>>> index bed1fcb..c539890 100644
>>> --- a/fs/ocfs2/acl.c
>>> +++ b/fs/ocfs2/acl.c
>>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, 
>>> struct posix_acl *acl, int type)
>>>   {
>>>       struct buffer_head *bh = NULL;
>>>       int status = 0;
>>> -
>>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>>> +    int arg_flags = 0, has_locked;
>>> +    struct ocfs2_holder oh;
>>> +    struct ocfs2_lock_res *lockres;
>>> +
>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>> +    if (has_locked)
>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>       if (status < 0) {
>>>           if (status != -ENOENT)
>>>               mlog_errno(status);
>>>           return status;
>>>       }
>>> +    if (!has_locked)
>>> +        ocfs2_add_holder(lockres, &oh);
>>> +
>>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
>>> -    ocfs2_inode_unlock(inode, 1);
>>> +
>>> +    if (!has_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>> +        ocfs2_inode_unlock(inode, 1);
>>> +    }
>>>       brelse(bh);
>>> +
>>>       return status;
>>>   }
>>>   @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct 
>>> inode *inode, int type)
>>>       struct buffer_head *di_bh = NULL;
>>>       struct posix_acl *acl;
>>>       int ret;
>>> +    int arg_flags = 0, has_locked;
>>> +    struct ocfs2_holder oh;
>>> +    struct ocfs2_lock_res *lockres;
>>>         osb = OCFS2_SB(inode->i_sb);
>>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>>           return NULL;
>>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>>> +
>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>> +    if (has_locked)
>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>>       if (ret < 0) {
>>>           if (ret != -ENOENT)
>>>               mlog_errno(ret);
>>>           return ERR_PTR(ret);
>>>       }
>>> +    if (!has_locked)
>>> +        ocfs2_add_holder(lockres, &oh);
>>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>>   -    ocfs2_inode_unlock(inode, 0);
>>> +    if (!has_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>> +        ocfs2_inode_unlock(inode, 0);
>>> +    }
>>>       brelse(di_bh);
>>> +
>>>       return acl;
>>>   }
>>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>>> index c488965..62be75d 100644
>>> --- a/fs/ocfs2/file.c
>>> +++ b/fs/ocfs2/file.c
>>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, 
>>> struct iattr *attr)
>>>       handle_t *handle = NULL;
>>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>>       int qtype;
>>> +    int arg_flags = 0, had_lock;
>>> +    struct ocfs2_holder oh;
>>> +    struct ocfs2_lock_res *lockres;
>>>         trace_ocfs2_setattr(inode, dentry,
>>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, 
>>> struct iattr *attr)
>>>           }
>>>       }
>>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>>> +    if (had_lock)
>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>       if (status < 0) {
>>>           if (status != -ENOENT)
>>>               mlog_errno(status);
>>>           goto bail_unlock_rw;
>>>       }
>>> -    inode_locked = 1;
>>> +    if (!had_lock) {
>>> +        ocfs2_add_holder(lockres, &oh);
>>> +        inode_locked = 1;
>>> +    }
>>>         if (size_change) {
>>>           status = inode_newsize_ok(inode, attr->ia_size);
>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, 
>>> struct iattr *attr)
>>>   bail_commit:
>>>       ocfs2_commit_trans(osb, handle);
>>>   bail_unlock:
>>> -    if (status) {
>>> +    if (status && inode_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>>           ocfs2_inode_unlock(inode, 1);
>>>           inode_locked = 0;
>>>       }
>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, 
>>> struct iattr *attr)
>>>           if (status < 0)
>>>               mlog_errno(status);
>>>       }
>>> -    if (inode_locked)
>>> +    if (inode_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>>           ocfs2_inode_unlock(inode, 1);
>>> +    }
>>>         brelse(bh);
>>>       return status;
>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>   int ocfs2_permission(struct inode *inode, int mask)
>>>   {
>>>       int ret;
>>> +    int has_locked;
>>> +    struct ocfs2_holder oh;
>>> +    struct ocfs2_lock_res *lockres;
>>>         if (mask & MAY_NOT_BLOCK)
>>>           return -ECHILD;
>>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>> -    if (ret) {
>>> -        if (ret != -ENOENT)
>>> -            mlog_errno(ret);
>>> -        goto out;
>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>> +    if (!has_locked) {
>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>> +        if (ret) {
>>> +            if (ret != -ENOENT)
>>> +                mlog_errno(ret);
>>> +            goto out;
>>> +        }
>>> +        ocfs2_add_holder(lockres, &oh);
>>>       }
>>>         ret = generic_permission(inode, mask);
>>>   -    ocfs2_inode_unlock(inode, 0);
>>> +    if (!has_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>> +        ocfs2_inode_unlock(inode, 0);
>>> +    }
>>>   out:
>>>       return ret;
>>>   }
>>
>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  2017-01-06  7:03     ` Eric Ren
@ 2017-01-06  7:24       ` Joseph Qi
  2017-01-06  8:04         ` Eric Ren
  0 siblings, 1 reply; 32+ messages in thread
From: Joseph Qi @ 2017-01-06  7:24 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel



On 17/1/6 15:03, Eric Ren wrote:
> On 01/06/2017 02:07 PM, Joseph Qi wrote:
>> Hi Eric,
>>
>>
>> On 17/1/5 23:31, Eric Ren wrote:
>>> We are in the situation that we have to avoid recursive cluster 
>>> locking,
>>> but there is no way to check if a cluster lock has been taken by a
>>> precess already.
>>>
>>> Mostly, we can avoid recursive locking by writing code carefully.
>>> However, we found that it's very hard to handle the routines that
>>> are invoked directly by vfs code. For instance:
>>>
>>> const struct inode_operations ocfs2_file_iops = {
>>>      .permission     = ocfs2_permission,
>>>      .get_acl        = ocfs2_iop_get_acl,
>>>      .set_acl        = ocfs2_iop_set_acl,
>>> };
>>>
>>> Both ocfs2_permission() and ocfs2_iop_get_acl() call 
>>> ocfs2_inode_lock(PR):
>>> do_sys_open
>>>   may_open
>>>    inode_permission
>>>     ocfs2_permission
>>>      ocfs2_inode_lock() <=== first time
>>>       generic_permission
>>>        get_acl
>>>         ocfs2_iop_get_acl
>>>     ocfs2_inode_lock() <=== recursive one
>>>
>>> A deadlock will occur if a remote EX request comes in between two
>>> of ocfs2_inode_lock(). Briefly describe how the deadlock is formed:
>>>
>>> On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
>>> BAST(ocfs2_generic_handle_bast) when downconvert is started
>>> on behalf of the remote EX lock request. Another hand, the recursive
>>> cluster lock (the second one) will be blocked in in 
>>> __ocfs2_cluster_lock()
>>> because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, 
>>> why?
>>> because there is no chance for the first cluster lock on this node 
>>> to be
>>> unlocked - we block ourselves in the code path.
>>>
>>> The idea to fix this issue is mostly taken from gfs2 code.
>>> 1. introduce a new field: struct ocfs2_lock_res.l_holders, to
>>> keep track of the processes' pid  who has taken the cluster lock
>>> of this lock resource;
>>> 2. introduce a new flag for ocfs2_inode_lock_full: 
>>> OCFS2_META_LOCK_GETBH;
>>> it means just getting back disk inode bh for us if we've got cluster 
>>> lock.
>>> 3. export a helper: ocfs2_is_locked_by_me() is used to check if we
>>> have got the cluster lock in the upper code path.
>>>
>>> The tracking logic should be used by some of the ocfs2 vfs's callbacks,
>>> to solve the recursive locking issue cuased by the fact that vfs 
>>> routines
>>> can call into each other.
>>>
>>> The performance penalty of processing the holder list should only be 
>>> seen
>>> at a few cases where the tracking logic is used, such as get/set acl.
>>>
>>> You may ask what if the first time we got a PR lock, and the second 
>>> time
>>> we want a EX lock? fortunately, this case never happens in the real 
>>> world,
>>> as far as I can see, including permission check, 
>>> (get|set)_(acl|attr), and
>>> the gfs2 code also do so.
>>>
>>> Signed-off-by: Eric Ren <zren@suse.com>
>>> ---
>>>   fs/ocfs2/dlmglue.c | 47 
>>> ++++++++++++++++++++++++++++++++++++++++++++---
>>>   fs/ocfs2/dlmglue.h | 18 ++++++++++++++++++
>>>   fs/ocfs2/ocfs2.h   |  1 +
>>>   3 files changed, 63 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
>>> index 83d576f..500bda4 100644
>>> --- a/fs/ocfs2/dlmglue.c
>>> +++ b/fs/ocfs2/dlmglue.c
>>> @@ -532,6 +532,7 @@ void ocfs2_lock_res_init_once(struct 
>>> ocfs2_lock_res *res)
>>>       init_waitqueue_head(&res->l_event);
>>>       INIT_LIST_HEAD(&res->l_blocked_list);
>>>       INIT_LIST_HEAD(&res->l_mask_waiters);
>>> +    INIT_LIST_HEAD(&res->l_holders);
>>>   }
>>>     void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res,
>>> @@ -749,6 +750,45 @@ void ocfs2_lock_res_free(struct ocfs2_lock_res 
>>> *res)
>>>       res->l_flags = 0UL;
>>>   }
>>>   +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>>> +                   struct ocfs2_holder *oh)
>>> +{
>>> +    INIT_LIST_HEAD(&oh->oh_list);
>>> +    oh->oh_owner_pid =  get_pid(task_pid(current));
>>> +
>>> +    spin_lock(&lockres->l_lock);
>>> +    list_add_tail(&oh->oh_list, &lockres->l_holders);
>>> +    spin_unlock(&lockres->l_lock);
>>> +}
>>> +
>>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>>> +                       struct ocfs2_holder *oh)
>>> +{
>>> +    spin_lock(&lockres->l_lock);
>>> +    list_del(&oh->oh_list);
>>> +    spin_unlock(&lockres->l_lock);
>>> +
>>> +    put_pid(oh->oh_owner_pid);
>>> +}
>>> +
>>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct 
>>> ocfs2_lock_res *lockres)
>>> +{
>>> +    struct ocfs2_holder *oh;
>>> +    struct pid *pid;
>>> +
>>> +    /* look in the list of holders for one with the current task as 
>>> owner */
>>> +    spin_lock(&lockres->l_lock);
>>> +    pid = task_pid(current);
>>> +    list_for_each_entry(oh, &lockres->l_holders, oh_list) {
>>> +        if (oh->oh_owner_pid == pid)
>>> +            goto out;
>>> +    }
>>> +    oh = NULL;
>>> +out:
>>> +    spin_unlock(&lockres->l_lock);
>>> +    return oh;
>>> +}
>> Since this ocfs2_holder won't be used in the caller, I suggest just 
>> return a bool value here.
>> Something like:
>> spin_lock();
>> list_for_each_entry() {
>>     if (oh->oh_owner_pid == pid) {
>>         spin_unlock();
>>         return 1;
>>     }
>> }
>> spin_unlock();
>> return 0;
>
> Aha, you have the point. However, it is also reasonable to return the 
> lock holder by the way.
> When debugging with printk or crash, it's easy to get the pid of the 
> holder without any further
> analysis. So, I tend to keep it;-)
IC, but we can also get the ocfs2_holder from ocfs2_lock_res in case of 
coredump, right?
I think it is indirectly in your way, and mismatch with the function name:)

Thanks
,Joseph
>
> Thanks very much for your review!
> Eric
>
>>
>> Thanks,
>> Joseph
>>> +
>>>   static inline void ocfs2_inc_holders(struct ocfs2_lock_res *lockres,
>>>                        int level)
>>>   {
>>> @@ -2333,8 +2373,9 @@ int ocfs2_inode_lock_full_nested(struct inode 
>>> *inode,
>>>           goto getbh;
>>>       }
>>>   -    if (ocfs2_mount_local(osb))
>>> -        goto local;
>>> +    if ((arg_flags & OCFS2_META_LOCK_GETBH) ||
>>> +        ocfs2_mount_local(osb))
>>> +        goto update;
>>>         if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>>           ocfs2_wait_for_recovery(osb);
>>> @@ -2363,7 +2404,7 @@ int ocfs2_inode_lock_full_nested(struct inode 
>>> *inode,
>>>       if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>>           ocfs2_wait_for_recovery(osb);
>>>   -local:
>>> +update:
>>>       /*
>>>        * We only see this flag if we're being called from
>>>        * ocfs2_read_locked_inode(). It means we're locking an inode
>>> diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
>>> index d293a22..d65ff1e 100644
>>> --- a/fs/ocfs2/dlmglue.h
>>> +++ b/fs/ocfs2/dlmglue.h
>>> @@ -70,6 +70,11 @@ struct ocfs2_orphan_scan_lvb {
>>>       __be32    lvb_os_seqno;
>>>   };
>>>   +struct ocfs2_holder {
>>> +    struct list_head oh_list;
>>> +    struct pid *oh_owner_pid;
>>> +};
>>> +
>>>   /* ocfs2_inode_lock_full() 'arg_flags' flags */
>>>   /* don't wait on recovery. */
>>>   #define OCFS2_META_LOCK_RECOVERY    (0x01)
>>> @@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
>>>   #define OCFS2_META_LOCK_NOQUEUE        (0x02)
>>>   /* don't block waiting for the downconvert thread, instead return 
>>> -EAGAIN */
>>>   #define OCFS2_LOCK_NONBLOCK        (0x04)
>>> +/* just get back disk inode bh if we've got cluster lock. */
>>> +#define OCFS2_META_LOCK_GETBH        (0x08)
>>>     /* Locking subclasses of inode cluster lock */
>>>   enum {
>>> @@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug 
>>> *dlm_debug);
>>>     /* To set the locking protocol on module initialization */
>>>   void ocfs2_set_locking_protocol(void);
>>> +
>>> +/*
>>> + * Keep a list of processes who have interest in a lockres.
>>> + * Note: this is now only uesed for check recursive cluster lock.
>>> + */
>>> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>>> +                 struct ocfs2_holder *oh);
>>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>>> +                 struct ocfs2_holder *oh);
>>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct 
>>> ocfs2_lock_res *lockres);
>>> +
>>>   #endif    /* DLMGLUE_H */
>>> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
>>> index 7e5958b..0c39d71 100644
>>> --- a/fs/ocfs2/ocfs2.h
>>> +++ b/fs/ocfs2/ocfs2.h
>>> @@ -172,6 +172,7 @@ struct ocfs2_lock_res {
>>>         struct list_head         l_blocked_list;
>>>       struct list_head         l_mask_waiters;
>>> +    struct list_head     l_holders;
>>>         unsigned long         l_flags;
>>>       char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
>>
>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  2017-01-06  7:24       ` Joseph Qi
@ 2017-01-06  8:04         ` Eric Ren
  0 siblings, 0 replies; 32+ messages in thread
From: Eric Ren @ 2017-01-06  8:04 UTC (permalink / raw)
  To: Joseph Qi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

On 01/06/2017 03:24 PM, Joseph Qi wrote:
>
>
> On 17/1/6 15:03, Eric Ren wrote:
>> On 01/06/2017 02:07 PM, Joseph Qi wrote:
>>> Hi Eric,
>>>
>>>
>>> On 17/1/5 23:31, Eric Ren wrote:
>>>> We are in the situation that we have to avoid recursive cluster locking,
>>>> but there is no way to check if a cluster lock has been taken by a
>>>> precess already.
>>>>
>>>> Mostly, we can avoid recursive locking by writing code carefully.
>>>> However, we found that it's very hard to handle the routines that
>>>> are invoked directly by vfs code. For instance:
>>>>
>>>> const struct inode_operations ocfs2_file_iops = {
>>>>      .permission     = ocfs2_permission,
>>>>      .get_acl        = ocfs2_iop_get_acl,
>>>>      .set_acl        = ocfs2_iop_set_acl,
>>>> };
>>>>
>>>> Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):
>>>> do_sys_open
>>>>   may_open
>>>>    inode_permission
>>>>     ocfs2_permission
>>>>      ocfs2_inode_lock() <=== first time
>>>>       generic_permission
>>>>        get_acl
>>>>         ocfs2_iop_get_acl
>>>>     ocfs2_inode_lock() <=== recursive one
>>>>
>>>> A deadlock will occur if a remote EX request comes in between two
>>>> of ocfs2_inode_lock(). Briefly describe how the deadlock is formed:
>>>>
>>>> On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
>>>> BAST(ocfs2_generic_handle_bast) when downconvert is started
>>>> on behalf of the remote EX lock request. Another hand, the recursive
>>>> cluster lock (the second one) will be blocked in in __ocfs2_cluster_lock()
>>>> because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why?
>>>> because there is no chance for the first cluster lock on this node to be
>>>> unlocked - we block ourselves in the code path.
>>>>
>>>> The idea to fix this issue is mostly taken from gfs2 code.
>>>> 1. introduce a new field: struct ocfs2_lock_res.l_holders, to
>>>> keep track of the processes' pid  who has taken the cluster lock
>>>> of this lock resource;
>>>> 2. introduce a new flag for ocfs2_inode_lock_full: OCFS2_META_LOCK_GETBH;
>>>> it means just getting back disk inode bh for us if we've got cluster lock.
>>>> 3. export a helper: ocfs2_is_locked_by_me() is used to check if we
>>>> have got the cluster lock in the upper code path.
>>>>
>>>> The tracking logic should be used by some of the ocfs2 vfs's callbacks,
>>>> to solve the recursive locking issue cuased by the fact that vfs routines
>>>> can call into each other.
>>>>
>>>> The performance penalty of processing the holder list should only be seen
>>>> at a few cases where the tracking logic is used, such as get/set acl.
>>>>
>>>> You may ask what if the first time we got a PR lock, and the second time
>>>> we want a EX lock? fortunately, this case never happens in the real world,
>>>> as far as I can see, including permission check, (get|set)_(acl|attr), and
>>>> the gfs2 code also do so.
>>>>
>>>> Signed-off-by: Eric Ren <zren@suse.com>
>>>> ---
>>>>   fs/ocfs2/dlmglue.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
>>>>   fs/ocfs2/dlmglue.h | 18 ++++++++++++++++++
>>>>   fs/ocfs2/ocfs2.h   |  1 +
>>>>   3 files changed, 63 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
>>>> index 83d576f..500bda4 100644
>>>> --- a/fs/ocfs2/dlmglue.c
>>>> +++ b/fs/ocfs2/dlmglue.c
>>>> @@ -532,6 +532,7 @@ void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res)
>>>>       init_waitqueue_head(&res->l_event);
>>>>       INIT_LIST_HEAD(&res->l_blocked_list);
>>>>       INIT_LIST_HEAD(&res->l_mask_waiters);
>>>> +    INIT_LIST_HEAD(&res->l_holders);
>>>>   }
>>>>     void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res,
>>>> @@ -749,6 +750,45 @@ void ocfs2_lock_res_free(struct ocfs2_lock_res *res)
>>>>       res->l_flags = 0UL;
>>>>   }
>>>>   +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>>>> +                   struct ocfs2_holder *oh)
>>>> +{
>>>> +    INIT_LIST_HEAD(&oh->oh_list);
>>>> +    oh->oh_owner_pid =  get_pid(task_pid(current));
>>>> +
>>>> +    spin_lock(&lockres->l_lock);
>>>> +    list_add_tail(&oh->oh_list, &lockres->l_holders);
>>>> +    spin_unlock(&lockres->l_lock);
>>>> +}
>>>> +
>>>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>>>> +                       struct ocfs2_holder *oh)
>>>> +{
>>>> +    spin_lock(&lockres->l_lock);
>>>> +    list_del(&oh->oh_list);
>>>> +    spin_unlock(&lockres->l_lock);
>>>> +
>>>> +    put_pid(oh->oh_owner_pid);
>>>> +}
>>>> +
>>>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres)
>>>> +{
>>>> +    struct ocfs2_holder *oh;
>>>> +    struct pid *pid;
>>>> +
>>>> +    /* look in the list of holders for one with the current task as owner */
>>>> +    spin_lock(&lockres->l_lock);
>>>> +    pid = task_pid(current);
>>>> +    list_for_each_entry(oh, &lockres->l_holders, oh_list) {
>>>> +        if (oh->oh_owner_pid == pid)
>>>> +            goto out;
>>>> +    }
>>>> +    oh = NULL;
>>>> +out:
>>>> +    spin_unlock(&lockres->l_lock);
>>>> +    return oh;
>>>> +}
>>> Since this ocfs2_holder won't be used in the caller, I suggest just return a bool value 
>>> here.
>>> Something like:
>>> spin_lock();
>>> list_for_each_entry() {
>>>     if (oh->oh_owner_pid == pid) {
>>>         spin_unlock();
>>>         return 1;
>>>     }
>>> }
>>> spin_unlock();
>>> return 0;
>>
>> Aha, you have the point. However, it is also reasonable to return the lock holder by the 
>> way.
>> When debugging with printk or crash, it's easy to get the pid of the holder without any 
>> further
>> analysis. So, I tend to keep it;-)
> IC, but we can also get the ocfs2_holder from ocfs2_lock_res in case of coredump, right?
You are right, but it's not straightforward that you will need the `list` commands of crash 
to do that.
And what if using printk?
> I think it is indirectly in your way, and mismatch with the function name:)
Yes, it's not good.

Thanks,
Eric

>
> Thanks
> ,Joseph
>>
>> Thanks very much for your review!
>> Eric
>>
>>>
>>> Thanks,
>>> Joseph
>>>> +
>>>>   static inline void ocfs2_inc_holders(struct ocfs2_lock_res *lockres,
>>>>                        int level)
>>>>   {
>>>> @@ -2333,8 +2373,9 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>>>>           goto getbh;
>>>>       }
>>>>   -    if (ocfs2_mount_local(osb))
>>>> -        goto local;
>>>> +    if ((arg_flags & OCFS2_META_LOCK_GETBH) ||
>>>> +        ocfs2_mount_local(osb))
>>>> +        goto update;
>>>>         if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>>>           ocfs2_wait_for_recovery(osb);
>>>> @@ -2363,7 +2404,7 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>>>>       if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>>>           ocfs2_wait_for_recovery(osb);
>>>>   -local:
>>>> +update:
>>>>       /*
>>>>        * We only see this flag if we're being called from
>>>>        * ocfs2_read_locked_inode(). It means we're locking an inode
>>>> diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
>>>> index d293a22..d65ff1e 100644
>>>> --- a/fs/ocfs2/dlmglue.h
>>>> +++ b/fs/ocfs2/dlmglue.h
>>>> @@ -70,6 +70,11 @@ struct ocfs2_orphan_scan_lvb {
>>>>       __be32    lvb_os_seqno;
>>>>   };
>>>>   +struct ocfs2_holder {
>>>> +    struct list_head oh_list;
>>>> +    struct pid *oh_owner_pid;
>>>> +};
>>>> +
>>>>   /* ocfs2_inode_lock_full() 'arg_flags' flags */
>>>>   /* don't wait on recovery. */
>>>>   #define OCFS2_META_LOCK_RECOVERY    (0x01)
>>>> @@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
>>>>   #define OCFS2_META_LOCK_NOQUEUE        (0x02)
>>>>   /* don't block waiting for the downconvert thread, instead return -EAGAIN */
>>>>   #define OCFS2_LOCK_NONBLOCK        (0x04)
>>>> +/* just get back disk inode bh if we've got cluster lock. */
>>>> +#define OCFS2_META_LOCK_GETBH        (0x08)
>>>>     /* Locking subclasses of inode cluster lock */
>>>>   enum {
>>>> @@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug *dlm_debug);
>>>>     /* To set the locking protocol on module initialization */
>>>>   void ocfs2_set_locking_protocol(void);
>>>> +
>>>> +/*
>>>> + * Keep a list of processes who have interest in a lockres.
>>>> + * Note: this is now only uesed for check recursive cluster lock.
>>>> + */
>>>> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>>>> +                 struct ocfs2_holder *oh);
>>>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>>>> +                 struct ocfs2_holder *oh);
>>>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
>>>> +
>>>>   #endif    /* DLMGLUE_H */
>>>> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
>>>> index 7e5958b..0c39d71 100644
>>>> --- a/fs/ocfs2/ocfs2.h
>>>> +++ b/fs/ocfs2/ocfs2.h
>>>> @@ -172,6 +172,7 @@ struct ocfs2_lock_res {
>>>>         struct list_head         l_blocked_list;
>>>>       struct list_head         l_mask_waiters;
>>>> +    struct list_head     l_holders;
>>>>         unsigned long         l_flags;
>>>>       char l_name[OCFS2_LOCK_ID_MAX_LEN];
>>>
>>>
>>
>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-06  7:14       ` Joseph Qi
@ 2017-01-06  8:21         ` Eric Ren
  2017-01-06  9:03           ` Joseph Qi
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-06  8:21 UTC (permalink / raw)
  To: Joseph Qi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

On 01/06/2017 03:14 PM, Joseph Qi wrote:
>
>
> On 17/1/6 14:56, Eric Ren wrote:
>> On 01/06/2017 02:09 PM, Joseph Qi wrote:
>>> Hi Eric,
>>>
>>>
>>> On 17/1/5 23:31, Eric Ren wrote:
>>>> Commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
>>>> results in a deadlock, as the author "Tariq Saeed" realized shortly
>>>> after the patch was merged. The discussion happened here
>>>> (https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html).
>>>>
>>>> The reason why taking cluster inode lock at vfs entry points opens up
>>>> a self deadlock window, is explained in the previous patch of this
>>>> series.
>>>>
>>>> So far, we have seen two different code paths that have this issue.
>>>> 1. do_sys_open
>>>>       may_open
>>>>        inode_permission
>>>>         ocfs2_permission
>>>>          ocfs2_inode_lock() <=== take PR
>>>>           generic_permission
>>>>            get_acl
>>>>             ocfs2_iop_get_acl
>>>>              ocfs2_inode_lock() <=== take PR
>>>> 2. fchmod|fchmodat
>>>>      chmod_common
>>>>       notify_change
>>>>        ocfs2_setattr <=== take EX
>>>>         posix_acl_chmod
>>>>          get_acl
>>>>           ocfs2_iop_get_acl <=== take PR
>>>>          ocfs2_iop_set_acl <=== take EX
>>>>
>>>> Fixes them by adding the tracking logic (in the previous patch) for
>>>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>>>> ocfs2_setattr().
>>> As described cases above, shall we just add the tracking logic only for set/get_acl()?
>>
>> The idea is to detect recursive locking on the running task stack. Take case 1) for 
>> example if ocfs2_permisssion()
>> is not changed:
>>
>> ocfs2_permission() <=== take PR, ocfs2_holder is not added
>>    ocfs2_iop_get_acl <=== still take PR, because there is no lock holder on the tracking 
>> list
> I mean we have no need to check if locked by me, just do inode lock and add holder.
> This will make code more clean, IMO.
Oh, sorry, I get your point this time. I think we need to check it if there are more than 
one processes that hold
PR lock on the same resource.  If I don't understand you correctly, please tell me why you 
think it's not neccessary
to check before getting lock?

Thanks,
Eric
>
> Thanks,
> Joseph
>>
>> Thanks for your review;-)
>> Eric
>>
>>>
>>> Thanks,
>>> Joseph
>>>>
>>>> Signed-off-by: Eric Ren <zren@suse.com>
>>>> ---
>>>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>>>
>>>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>>>> index bed1fcb..c539890 100644
>>>> --- a/fs/ocfs2/acl.c
>>>> +++ b/fs/ocfs2/acl.c
>>>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, 
>>>> int type)
>>>>   {
>>>>       struct buffer_head *bh = NULL;
>>>>       int status = 0;
>>>> -
>>>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>> +    int arg_flags = 0, has_locked;
>>>> +    struct ocfs2_holder oh;
>>>> +    struct ocfs2_lock_res *lockres;
>>>> +
>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>> +    if (has_locked)
>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>       if (status < 0) {
>>>>           if (status != -ENOENT)
>>>>               mlog_errno(status);
>>>>           return status;
>>>>       }
>>>> +    if (!has_locked)
>>>> +        ocfs2_add_holder(lockres, &oh);
>>>> +
>>>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
>>>> -    ocfs2_inode_unlock(inode, 1);
>>>> +
>>>> +    if (!has_locked) {
>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>> +        ocfs2_inode_unlock(inode, 1);
>>>> +    }
>>>>       brelse(bh);
>>>> +
>>>>       return status;
>>>>   }
>>>>   @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, int type)
>>>>       struct buffer_head *di_bh = NULL;
>>>>       struct posix_acl *acl;
>>>>       int ret;
>>>> +    int arg_flags = 0, has_locked;
>>>> +    struct ocfs2_holder oh;
>>>> +    struct ocfs2_lock_res *lockres;
>>>>         osb = OCFS2_SB(inode->i_sb);
>>>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>>>           return NULL;
>>>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>>>> +
>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>> +    if (has_locked)
>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>>>       if (ret < 0) {
>>>>           if (ret != -ENOENT)
>>>>               mlog_errno(ret);
>>>>           return ERR_PTR(ret);
>>>>       }
>>>> +    if (!has_locked)
>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>> +    if (!has_locked) {
>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>> +        ocfs2_inode_unlock(inode, 0);
>>>> +    }
>>>>       brelse(di_bh);
>>>> +
>>>>       return acl;
>>>>   }
>>>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>>>> index c488965..62be75d 100644
>>>> --- a/fs/ocfs2/file.c
>>>> +++ b/fs/ocfs2/file.c
>>>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>       handle_t *handle = NULL;
>>>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>>>       int qtype;
>>>> +    int arg_flags = 0, had_lock;
>>>> +    struct ocfs2_holder oh;
>>>> +    struct ocfs2_lock_res *lockres;
>>>>         trace_ocfs2_setattr(inode, dentry,
>>>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>>>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>           }
>>>>       }
>>>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>> +    if (had_lock)
>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>       if (status < 0) {
>>>>           if (status != -ENOENT)
>>>>               mlog_errno(status);
>>>>           goto bail_unlock_rw;
>>>>       }
>>>> -    inode_locked = 1;
>>>> +    if (!had_lock) {
>>>> +        ocfs2_add_holder(lockres, &oh);
>>>> +        inode_locked = 1;
>>>> +    }
>>>>         if (size_change) {
>>>>           status = inode_newsize_ok(inode, attr->ia_size);
>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>   bail_commit:
>>>>       ocfs2_commit_trans(osb, handle);
>>>>   bail_unlock:
>>>> -    if (status) {
>>>> +    if (status && inode_locked) {
>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>           ocfs2_inode_unlock(inode, 1);
>>>>           inode_locked = 0;
>>>>       }
>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>           if (status < 0)
>>>>               mlog_errno(status);
>>>>       }
>>>> -    if (inode_locked)
>>>> +    if (inode_locked) {
>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>           ocfs2_inode_unlock(inode, 1);
>>>> +    }
>>>>         brelse(bh);
>>>>       return status;
>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>   int ocfs2_permission(struct inode *inode, int mask)
>>>>   {
>>>>       int ret;
>>>> +    int has_locked;
>>>> +    struct ocfs2_holder oh;
>>>> +    struct ocfs2_lock_res *lockres;
>>>>         if (mask & MAY_NOT_BLOCK)
>>>>           return -ECHILD;
>>>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>> -    if (ret) {
>>>> -        if (ret != -ENOENT)
>>>> -            mlog_errno(ret);
>>>> -        goto out;
>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>> +    if (!has_locked) {
>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>> +        if (ret) {
>>>> +            if (ret != -ENOENT)
>>>> +                mlog_errno(ret);
>>>> +            goto out;
>>>> +        }
>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>       }
>>>>         ret = generic_permission(inode, mask);
>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>> +    if (!has_locked) {
>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>> +        ocfs2_inode_unlock(inode, 0);
>>>> +    }
>>>>   out:
>>>>       return ret;
>>>>   }
>>>
>>>
>>
>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-06  8:21         ` Eric Ren
@ 2017-01-06  9:03           ` Joseph Qi
  2017-01-06  9:13             ` Eric Ren
  0 siblings, 1 reply; 32+ messages in thread
From: Joseph Qi @ 2017-01-06  9:03 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel



On 17/1/6 16:21, Eric Ren wrote:
> On 01/06/2017 03:14 PM, Joseph Qi wrote:
>>
>>
>> On 17/1/6 14:56, Eric Ren wrote:
>>> On 01/06/2017 02:09 PM, Joseph Qi wrote:
>>>> Hi Eric,
>>>>
>>>>
>>>> On 17/1/5 23:31, Eric Ren wrote:
>>>>> Commit 743b5f1434f5 ("ocfs2: take inode lock in 
>>>>> ocfs2_iop_set/get_acl()")
>>>>> results in a deadlock, as the author "Tariq Saeed" realized shortly
>>>>> after the patch was merged. The discussion happened here
>>>>> (https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html). 
>>>>>
>>>>>
>>>>> The reason why taking cluster inode lock at vfs entry points opens up
>>>>> a self deadlock window, is explained in the previous patch of this
>>>>> series.
>>>>>
>>>>> So far, we have seen two different code paths that have this issue.
>>>>> 1. do_sys_open
>>>>>       may_open
>>>>>        inode_permission
>>>>>         ocfs2_permission
>>>>>          ocfs2_inode_lock() <=== take PR
>>>>>           generic_permission
>>>>>            get_acl
>>>>>             ocfs2_iop_get_acl
>>>>>              ocfs2_inode_lock() <=== take PR
>>>>> 2. fchmod|fchmodat
>>>>>      chmod_common
>>>>>       notify_change
>>>>>        ocfs2_setattr <=== take EX
>>>>>         posix_acl_chmod
>>>>>          get_acl
>>>>>           ocfs2_iop_get_acl <=== take PR
>>>>>          ocfs2_iop_set_acl <=== take EX
>>>>>
>>>>> Fixes them by adding the tracking logic (in the previous patch) for
>>>>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>>>>> ocfs2_setattr().
>>>> As described cases above, shall we just add the tracking logic only 
>>>> for set/get_acl()?
>>>
>>> The idea is to detect recursive locking on the running task stack. 
>>> Take case 1) for example if ocfs2_permisssion()
>>> is not changed:
>>>
>>> ocfs2_permission() <=== take PR, ocfs2_holder is not added
>>>    ocfs2_iop_get_acl <=== still take PR, because there is no lock 
>>> holder on the tracking list
>> I mean we have no need to check if locked by me, just do inode lock 
>> and add holder.
>> This will make code more clean, IMO.
> Oh, sorry, I get your point this time. I think we need to check it if 
> there are more than one processes that hold
> PR lock on the same resource.  If I don't understand you correctly, 
> please tell me why you think it's not neccessary
> to check before getting lock?
The code logic can only check if it is locked by myself. In the case
described above, ocfs2_permission is the first entry to take inode lock.
And even if check succeeds, it is a bug without unlock, but not the case
of recursive lock.

Thanks,
Joseph
>
> Thanks,
> Eric
>>
>> Thanks,
>> Joseph
>>>
>>> Thanks for your review;-)
>>> Eric
>>>
>>>>
>>>> Thanks,
>>>> Joseph
>>>>>
>>>>> Signed-off-by: Eric Ren <zren@suse.com>
>>>>> ---
>>>>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>>>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>>>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>>>>
>>>>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>>>>> index bed1fcb..c539890 100644
>>>>> --- a/fs/ocfs2/acl.c
>>>>> +++ b/fs/ocfs2/acl.c
>>>>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, 
>>>>> struct posix_acl *acl, int type)
>>>>>   {
>>>>>       struct buffer_head *bh = NULL;
>>>>>       int status = 0;
>>>>> -
>>>>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>> +    int arg_flags = 0, has_locked;
>>>>> +    struct ocfs2_holder oh;
>>>>> +    struct ocfs2_lock_res *lockres;
>>>>> +
>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>> +    if (has_locked)
>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>       if (status < 0) {
>>>>>           if (status != -ENOENT)
>>>>>               mlog_errno(status);
>>>>>           return status;
>>>>>       }
>>>>> +    if (!has_locked)
>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>> +
>>>>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
>>>>> -    ocfs2_inode_unlock(inode, 1);
>>>>> +
>>>>> +    if (!has_locked) {
>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>> +        ocfs2_inode_unlock(inode, 1);
>>>>> +    }
>>>>>       brelse(bh);
>>>>> +
>>>>>       return status;
>>>>>   }
>>>>>   @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct 
>>>>> inode *inode, int type)
>>>>>       struct buffer_head *di_bh = NULL;
>>>>>       struct posix_acl *acl;
>>>>>       int ret;
>>>>> +    int arg_flags = 0, has_locked;
>>>>> +    struct ocfs2_holder oh;
>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>         osb = OCFS2_SB(inode->i_sb);
>>>>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>>>>           return NULL;
>>>>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>>>>> +
>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>> +    if (has_locked)
>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>>>>       if (ret < 0) {
>>>>>           if (ret != -ENOENT)
>>>>>               mlog_errno(ret);
>>>>>           return ERR_PTR(ret);
>>>>>       }
>>>>> +    if (!has_locked)
>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>> +    if (!has_locked) {
>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>> +    }
>>>>>       brelse(di_bh);
>>>>> +
>>>>>       return acl;
>>>>>   }
>>>>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>>>>> index c488965..62be75d 100644
>>>>> --- a/fs/ocfs2/file.c
>>>>> +++ b/fs/ocfs2/file.c
>>>>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>> struct iattr *attr)
>>>>>       handle_t *handle = NULL;
>>>>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>>>>       int qtype;
>>>>> +    int arg_flags = 0, had_lock;
>>>>> +    struct ocfs2_holder oh;
>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>         trace_ocfs2_setattr(inode, dentry,
>>>>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>>>>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>> struct iattr *attr)
>>>>>           }
>>>>>       }
>>>>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>> +    if (had_lock)
>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>       if (status < 0) {
>>>>>           if (status != -ENOENT)
>>>>>               mlog_errno(status);
>>>>>           goto bail_unlock_rw;
>>>>>       }
>>>>> -    inode_locked = 1;
>>>>> +    if (!had_lock) {
>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>> +        inode_locked = 1;
>>>>> +    }
>>>>>         if (size_change) {
>>>>>           status = inode_newsize_ok(inode, attr->ia_size);
>>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>> struct iattr *attr)
>>>>>   bail_commit:
>>>>>       ocfs2_commit_trans(osb, handle);
>>>>>   bail_unlock:
>>>>> -    if (status) {
>>>>> +    if (status && inode_locked) {
>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>           inode_locked = 0;
>>>>>       }
>>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>> struct iattr *attr)
>>>>>           if (status < 0)
>>>>>               mlog_errno(status);
>>>>>       }
>>>>> -    if (inode_locked)
>>>>> +    if (inode_locked) {
>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>> +    }
>>>>>         brelse(bh);
>>>>>       return status;
>>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>>   int ocfs2_permission(struct inode *inode, int mask)
>>>>>   {
>>>>>       int ret;
>>>>> +    int has_locked;
>>>>> +    struct ocfs2_holder oh;
>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>         if (mask & MAY_NOT_BLOCK)
>>>>>           return -ECHILD;
>>>>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>> -    if (ret) {
>>>>> -        if (ret != -ENOENT)
>>>>> -            mlog_errno(ret);
>>>>> -        goto out;
>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>> +    if (!has_locked) {
>>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>> +        if (ret) {
>>>>> +            if (ret != -ENOENT)
>>>>> +                mlog_errno(ret);
>>>>> +            goto out;
>>>>> +        }
>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>       }
>>>>>         ret = generic_permission(inode, mask);
>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>> +    if (!has_locked) {
>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>> +    }
>>>>>   out:
>>>>>       return ret;
>>>>>   }
>>>>
>>>>
>>>
>>
>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-06  9:03           ` Joseph Qi
@ 2017-01-06  9:13             ` Eric Ren
  2017-01-06  9:55               ` Joseph Qi
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-06  9:13 UTC (permalink / raw)
  To: Joseph Qi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

Hi,

>>>>>>
>>>>>> Fixes them by adding the tracking logic (in the previous patch) for
>>>>>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>>>>>> ocfs2_setattr().
>>>>> As described cases above, shall we just add the tracking logic only for set/get_acl()?
>>>>
>>>> The idea is to detect recursive locking on the running task stack. Take case 1) for 
>>>> example if ocfs2_permisssion()
>>>> is not changed:
>>>>
>>>> ocfs2_permission() <=== take PR, ocfs2_holder is not added
>>>>    ocfs2_iop_get_acl <=== still take PR, because there is no lock holder on the 
>>>> tracking list
>>> I mean we have no need to check if locked by me, just do inode lock and add holder.
>>> This will make code more clean, IMO.
>> Oh, sorry, I get your point this time. I think we need to check it if there are more than 
>> one processes that hold
>> PR lock on the same resource.  If I don't understand you correctly, please tell me why 
>> you think it's not neccessary
>> to check before getting lock?
> The code logic can only check if it is locked by myself. In the case
Why only...?
> described above, ocfs2_permission is the first entry to take inode lock.
> And even if check succeeds, it is a bug without unlock, but not the case
> of recursive lock.

By checking succeeds, you mean it's locked by me, right? If so, this flag
                       "arg_flags = OCFS2_META_LOCK_GETBH"
will be passed down to ocfs2_inode_lock_full(), which gets back buffer head of
the disk inode for us if necessary, but doesn't take cluster locking again. So, there is
no need to unlock in such case.

Thanks,
Eric

>
> Thanks,
> Joseph
>>
>> Thanks,
>> Eric
>>>
>>> Thanks,
>>> Joseph
>>>>
>>>> Thanks for your review;-)
>>>> Eric
>>>>
>>>>>
>>>>> Thanks,
>>>>> Joseph
>>>>>>
>>>>>> Signed-off-by: Eric Ren <zren@suse.com>
>>>>>> ---
>>>>>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>>>>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>>>>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>>>>>
>>>>>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>>>>>> index bed1fcb..c539890 100644
>>>>>> --- a/fs/ocfs2/acl.c
>>>>>> +++ b/fs/ocfs2/acl.c
>>>>>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl 
>>>>>> *acl, int type)
>>>>>>   {
>>>>>>       struct buffer_head *bh = NULL;
>>>>>>       int status = 0;
>>>>>> -
>>>>>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>> +    int arg_flags = 0, has_locked;
>>>>>> +    struct ocfs2_holder oh;
>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>> +
>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>> +    if (has_locked)
>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>       if (status < 0) {
>>>>>>           if (status != -ENOENT)
>>>>>>               mlog_errno(status);
>>>>>>           return status;
>>>>>>       }
>>>>>> +    if (!has_locked)
>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>> +
>>>>>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
>>>>>> -    ocfs2_inode_unlock(inode, 1);
>>>>>> +
>>>>>> +    if (!has_locked) {
>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>> +        ocfs2_inode_unlock(inode, 1);
>>>>>> +    }
>>>>>>       brelse(bh);
>>>>>> +
>>>>>>       return status;
>>>>>>   }
>>>>>>   @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, int 
>>>>>> type)
>>>>>>       struct buffer_head *di_bh = NULL;
>>>>>>       struct posix_acl *acl;
>>>>>>       int ret;
>>>>>> +    int arg_flags = 0, has_locked;
>>>>>> +    struct ocfs2_holder oh;
>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>         osb = OCFS2_SB(inode->i_sb);
>>>>>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>>>>>           return NULL;
>>>>>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>>>>>> +
>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>> +    if (has_locked)
>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>>>>>       if (ret < 0) {
>>>>>>           if (ret != -ENOENT)
>>>>>>               mlog_errno(ret);
>>>>>>           return ERR_PTR(ret);
>>>>>>       }
>>>>>> +    if (!has_locked)
>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>> +    if (!has_locked) {
>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>> +    }
>>>>>>       brelse(di_bh);
>>>>>> +
>>>>>>       return acl;
>>>>>>   }
>>>>>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>>>>>> index c488965..62be75d 100644
>>>>>> --- a/fs/ocfs2/file.c
>>>>>> +++ b/fs/ocfs2/file.c
>>>>>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>       handle_t *handle = NULL;
>>>>>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>>>>>       int qtype;
>>>>>> +    int arg_flags = 0, had_lock;
>>>>>> +    struct ocfs2_holder oh;
>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>         trace_ocfs2_setattr(inode, dentry,
>>>>>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>>>>>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>           }
>>>>>>       }
>>>>>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>> +    if (had_lock)
>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>       if (status < 0) {
>>>>>>           if (status != -ENOENT)
>>>>>>               mlog_errno(status);
>>>>>>           goto bail_unlock_rw;
>>>>>>       }
>>>>>> -    inode_locked = 1;
>>>>>> +    if (!had_lock) {
>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>> +        inode_locked = 1;
>>>>>> +    }
>>>>>>         if (size_change) {
>>>>>>           status = inode_newsize_ok(inode, attr->ia_size);
>>>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>   bail_commit:
>>>>>>       ocfs2_commit_trans(osb, handle);
>>>>>>   bail_unlock:
>>>>>> -    if (status) {
>>>>>> +    if (status && inode_locked) {
>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>>           inode_locked = 0;
>>>>>>       }
>>>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>           if (status < 0)
>>>>>>               mlog_errno(status);
>>>>>>       }
>>>>>> -    if (inode_locked)
>>>>>> +    if (inode_locked) {
>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>> +    }
>>>>>>         brelse(bh);
>>>>>>       return status;
>>>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>>>   int ocfs2_permission(struct inode *inode, int mask)
>>>>>>   {
>>>>>>       int ret;
>>>>>> +    int has_locked;
>>>>>> +    struct ocfs2_holder oh;
>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>         if (mask & MAY_NOT_BLOCK)
>>>>>>           return -ECHILD;
>>>>>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>> -    if (ret) {
>>>>>> -        if (ret != -ENOENT)
>>>>>> -            mlog_errno(ret);
>>>>>> -        goto out;
>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>> +    if (!has_locked) {
>>>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>> +        if (ret) {
>>>>>> +            if (ret != -ENOENT)
>>>>>> +                mlog_errno(ret);
>>>>>> +            goto out;
>>>>>> +        }
>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>       }
>>>>>>         ret = generic_permission(inode, mask);
>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>> +    if (!has_locked) {
>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>> +    }
>>>>>>   out:
>>>>>>       return ret;
>>>>>>   }
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-06  9:13             ` Eric Ren
@ 2017-01-06  9:55               ` Joseph Qi
  2017-01-06 11:56                 ` Eric Ren
  0 siblings, 1 reply; 32+ messages in thread
From: Joseph Qi @ 2017-01-06  9:55 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

On 17/1/6 17:13, Eric Ren wrote:
> Hi,
>
>>>>>>>
>>>>>>> Fixes them by adding the tracking logic (in the previous patch) for
>>>>>>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>>>>>>> ocfs2_setattr().
>>>>>> As described cases above, shall we just add the tracking logic 
>>>>>> only for set/get_acl()?
>>>>>
>>>>> The idea is to detect recursive locking on the running task stack. 
>>>>> Take case 1) for example if ocfs2_permisssion()
>>>>> is not changed:
>>>>>
>>>>> ocfs2_permission() <=== take PR, ocfs2_holder is not added
>>>>>    ocfs2_iop_get_acl <=== still take PR, because there is no lock 
>>>>> holder on the tracking list
>>>> I mean we have no need to check if locked by me, just do inode lock 
>>>> and add holder.
>>>> This will make code more clean, IMO.
>>> Oh, sorry, I get your point this time. I think we need to check it 
>>> if there are more than one processes that hold
>>> PR lock on the same resource.  If I don't understand you correctly, 
>>> please tell me why you think it's not neccessary
>>> to check before getting lock?
>> The code logic can only check if it is locked by myself. In the case
> Why only...?
>> described above, ocfs2_permission is the first entry to take inode lock.
>> And even if check succeeds, it is a bug without unlock, but not the case
>> of recursive lock.
>
> By checking succeeds, you mean it's locked by me, right? If so, this flag
>                       "arg_flags = OCFS2_META_LOCK_GETBH"
> will be passed down to ocfs2_inode_lock_full(), which gets back buffer 
> head of
> the disk inode for us if necessary, but doesn't take cluster locking 
> again. So, there is
> no need to unlock in such case.
I am trying to state my point more clearly...
The issue case you are trying to fix is:
Process A
take inode lock (phase1)
...
<<< race window (phase2, Process B)
...
take inode lock again (phase3)

Deadlock happens because Process B in phase2 and Process A in phase3
are waiting for each other.
So you are trying to fix it by making phase3 finish without really doing
__ocfs2_cluster_lock, then Process B can continue either.
Let us bear in mind that phase1 and phase3 are in the same context and
executed in order. That's why I think there is no need to check if locked
by myself in phase1.
If phase1 finds it is already locked by myself, that means the holder
is left by last operation without dec holder. That's why I think it is a bug
instead of a recursive lock case.

Thanks,
Joseph
>
> Thanks,
> Eric
>
>>
>> Thanks,
>> Joseph
>>>
>>> Thanks,
>>> Eric
>>>>
>>>> Thanks,
>>>> Joseph
>>>>>
>>>>> Thanks for your review;-)
>>>>> Eric
>>>>>
>>>>>>
>>>>>> Thanks,
>>>>>> Joseph
>>>>>>>
>>>>>>> Signed-off-by: Eric Ren <zren@suse.com>
>>>>>>> ---
>>>>>>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>>>>>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>>>>>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>>>>>>
>>>>>>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>>>>>>> index bed1fcb..c539890 100644
>>>>>>> --- a/fs/ocfs2/acl.c
>>>>>>> +++ b/fs/ocfs2/acl.c
>>>>>>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, 
>>>>>>> struct posix_acl *acl, int type)
>>>>>>>   {
>>>>>>>       struct buffer_head *bh = NULL;
>>>>>>>       int status = 0;
>>>>>>> -
>>>>>>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>>> +    int arg_flags = 0, has_locked;
>>>>>>> +    struct ocfs2_holder oh;
>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>> +
>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>> +    if (has_locked)
>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>>       if (status < 0) {
>>>>>>>           if (status != -ENOENT)
>>>>>>>               mlog_errno(status);
>>>>>>>           return status;
>>>>>>>       }
>>>>>>> +    if (!has_locked)
>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>> +
>>>>>>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, 
>>>>>>> NULL);
>>>>>>> -    ocfs2_inode_unlock(inode, 1);
>>>>>>> +
>>>>>>> +    if (!has_locked) {
>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>> +        ocfs2_inode_unlock(inode, 1);
>>>>>>> +    }
>>>>>>>       brelse(bh);
>>>>>>> +
>>>>>>>       return status;
>>>>>>>   }
>>>>>>>   @@ -303,21 +318,35 @@ struct posix_acl 
>>>>>>> *ocfs2_iop_get_acl(struct inode *inode, int type)
>>>>>>>       struct buffer_head *di_bh = NULL;
>>>>>>>       struct posix_acl *acl;
>>>>>>>       int ret;
>>>>>>> +    int arg_flags = 0, has_locked;
>>>>>>> +    struct ocfs2_holder oh;
>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>         osb = OCFS2_SB(inode->i_sb);
>>>>>>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>>>>>>           return NULL;
>>>>>>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>>>>>>> +
>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>> +    if (has_locked)
>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>>>>>>       if (ret < 0) {
>>>>>>>           if (ret != -ENOENT)
>>>>>>>               mlog_errno(ret);
>>>>>>>           return ERR_PTR(ret);
>>>>>>>       }
>>>>>>> +    if (!has_locked)
>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>>> +    if (!has_locked) {
>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>>> +    }
>>>>>>>       brelse(di_bh);
>>>>>>> +
>>>>>>>       return acl;
>>>>>>>   }
>>>>>>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>>>>>>> index c488965..62be75d 100644
>>>>>>> --- a/fs/ocfs2/file.c
>>>>>>> +++ b/fs/ocfs2/file.c
>>>>>>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>>>> struct iattr *attr)
>>>>>>>       handle_t *handle = NULL;
>>>>>>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>>>>>>       int qtype;
>>>>>>> +    int arg_flags = 0, had_lock;
>>>>>>> +    struct ocfs2_holder oh;
>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>         trace_ocfs2_setattr(inode, dentry,
>>>>>>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>>>>>>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>>>> struct iattr *attr)
>>>>>>>           }
>>>>>>>       }
>>>>>>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>> +    if (had_lock)
>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>>       if (status < 0) {
>>>>>>>           if (status != -ENOENT)
>>>>>>>               mlog_errno(status);
>>>>>>>           goto bail_unlock_rw;
>>>>>>>       }
>>>>>>> -    inode_locked = 1;
>>>>>>> +    if (!had_lock) {
>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>> +        inode_locked = 1;
>>>>>>> +    }
>>>>>>>         if (size_change) {
>>>>>>>           status = inode_newsize_ok(inode, attr->ia_size);
>>>>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>>>> struct iattr *attr)
>>>>>>>   bail_commit:
>>>>>>>       ocfs2_commit_trans(osb, handle);
>>>>>>>   bail_unlock:
>>>>>>> -    if (status) {
>>>>>>> +    if (status && inode_locked) {
>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>>>           inode_locked = 0;
>>>>>>>       }
>>>>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>>>> struct iattr *attr)
>>>>>>>           if (status < 0)
>>>>>>>               mlog_errno(status);
>>>>>>>       }
>>>>>>> -    if (inode_locked)
>>>>>>> +    if (inode_locked) {
>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>>> +    }
>>>>>>>         brelse(bh);
>>>>>>>       return status;
>>>>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>>>>   int ocfs2_permission(struct inode *inode, int mask)
>>>>>>>   {
>>>>>>>       int ret;
>>>>>>> +    int has_locked;
>>>>>>> +    struct ocfs2_holder oh;
>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>         if (mask & MAY_NOT_BLOCK)
>>>>>>>           return -ECHILD;
>>>>>>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>>> -    if (ret) {
>>>>>>> -        if (ret != -ENOENT)
>>>>>>> -            mlog_errno(ret);
>>>>>>> -        goto out;
>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>> +    if (!has_locked) {
>>>>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>>> +        if (ret) {
>>>>>>> +            if (ret != -ENOENT)
>>>>>>> +                mlog_errno(ret);
>>>>>>> +            goto out;
>>>>>>> +        }
>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>       }
>>>>>>>         ret = generic_permission(inode, mask);
>>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>>> +    if (!has_locked) {
>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>>> +    }
>>>>>>>   out:
>>>>>>>       return ret;
>>>>>>>   }
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-06  9:55               ` Joseph Qi
@ 2017-01-06 11:56                 ` Eric Ren
  2017-01-09  1:13                   ` Joseph Qi
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-06 11:56 UTC (permalink / raw)
  To: Joseph Qi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

Hi!

On 01/06/2017 05:55 PM, Joseph Qi wrote:
> On 17/1/6 17:13, Eric Ren wrote:
>> Hi,
>>
>>>>>>>>
>>>>>>>> Fixes them by adding the tracking logic (in the previous patch) for
>>>>>>>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>>>>>>>> ocfs2_setattr().
>>>>>>> As described cases above, shall we just add the tracking logic only for set/get_acl()?
>>>>>>
>>>>>> The idea is to detect recursive locking on the running task stack. Take case 1) for 
>>>>>> example if ocfs2_permisssion()
>>>>>> is not changed:
>>>>>>
>>>>>> ocfs2_permission() <=== take PR, ocfs2_holder is not added
>>>>>>    ocfs2_iop_get_acl <=== still take PR, because there is no lock holder on the 
>>>>>> tracking list
>>>>> I mean we have no need to check if locked by me, just do inode lock and add holder.
>>>>> This will make code more clean, IMO.
>>>> Oh, sorry, I get your point this time. I think we need to check it if there are more 
>>>> than one processes that hold
>>>> PR lock on the same resource.  If I don't understand you correctly, please tell me why 
>>>> you think it's not neccessary
>>>> to check before getting lock?
>>> The code logic can only check if it is locked by myself. In the case
>> Why only...?
>>> described above, ocfs2_permission is the first entry to take inode lock.
>>> And even if check succeeds, it is a bug without unlock, but not the case
>>> of recursive lock.
>>
>> By checking succeeds, you mean it's locked by me, right? If so, this flag
>>                       "arg_flags = OCFS2_META_LOCK_GETBH"
>> will be passed down to ocfs2_inode_lock_full(), which gets back buffer head of
>> the disk inode for us if necessary, but doesn't take cluster locking again. So, there is
>> no need to unlock in such case.
> I am trying to state my point more clearly...

Thanks a lot!

> The issue case you are trying to fix is:
> Process A
> take inode lock (phase1)
> ...
> <<< race window (phase2, Process B)

The deadlock only happens if process B is on a remote node and request EX lock.

Quote the patch[1/2]'s commit message:

A deadlock will occur if a remote EX request comes in between two of
ocfs2_inode_lock().  Briefly describe how the deadlock is formed:

On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of
the remote EX lock request.  Another hand, the recursive cluster lock (the
second one) will be blocked in in __ocfs2_cluster_lock() because of
OCFS2_LOCK_BLOCKED.  But, the downconvert never complete, why?  because
there is no chance for the first cluster lock on this node to be unlocked
- we block ourselves in the code path.
---

> ...
> take inode lock again (phase3)
>
> Deadlock happens because Process B in phase2 and Process A in phase3
> are waiting for each other.
It's local lock's (like i_mutex) responsibility to protect critical section from racing
among processes on the same node.

> So you are trying to fix it by making phase3 finish without really doing

Phase3 can go ahead because this node is already under protection of cluster lock.

> __ocfs2_cluster_lock, then Process B can continue either.
> Let us bear in mind that phase1 and phase3 are in the same context and
> executed in order. That's why I think there is no need to check if locked
> by myself in phase1.
> If phase1 finds it is already locked by myself, that means the holder
> is left by last operation without dec holder. That's why I think it is a bug
> instead of a recursive lock case.

Did I answer your question?

Thanks!
Eric

>
> Thanks,
> Joseph
>>
>> Thanks,
>> Eric
>>
>>>
>>> Thanks,
>>> Joseph
>>>>
>>>> Thanks,
>>>> Eric
>>>>>
>>>>> Thanks,
>>>>> Joseph
>>>>>>
>>>>>> Thanks for your review;-)
>>>>>> Eric
>>>>>>
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Joseph
>>>>>>>>
>>>>>>>> Signed-off-by: Eric Ren <zren@suse.com>
>>>>>>>> ---
>>>>>>>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>>>>>>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>>>>>>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>>>>>>>> index bed1fcb..c539890 100644
>>>>>>>> --- a/fs/ocfs2/acl.c
>>>>>>>> +++ b/fs/ocfs2/acl.c
>>>>>>>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl 
>>>>>>>> *acl, int type)
>>>>>>>>   {
>>>>>>>>       struct buffer_head *bh = NULL;
>>>>>>>>       int status = 0;
>>>>>>>> -
>>>>>>>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>>>> +    int arg_flags = 0, has_locked;
>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>> +
>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>> +    if (has_locked)
>>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>>>       if (status < 0) {
>>>>>>>>           if (status != -ENOENT)
>>>>>>>>               mlog_errno(status);
>>>>>>>>           return status;
>>>>>>>>       }
>>>>>>>> +    if (!has_locked)
>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>> +
>>>>>>>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
>>>>>>>> -    ocfs2_inode_unlock(inode, 1);
>>>>>>>> +
>>>>>>>> +    if (!has_locked) {
>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>> +        ocfs2_inode_unlock(inode, 1);
>>>>>>>> +    }
>>>>>>>>       brelse(bh);
>>>>>>>> +
>>>>>>>>       return status;
>>>>>>>>   }
>>>>>>>>   @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, 
>>>>>>>> int type)
>>>>>>>>       struct buffer_head *di_bh = NULL;
>>>>>>>>       struct posix_acl *acl;
>>>>>>>>       int ret;
>>>>>>>> +    int arg_flags = 0, has_locked;
>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>         osb = OCFS2_SB(inode->i_sb);
>>>>>>>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>>>>>>>           return NULL;
>>>>>>>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>>>>>>>> +
>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>> +    if (has_locked)
>>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>>>>>>>       if (ret < 0) {
>>>>>>>>           if (ret != -ENOENT)
>>>>>>>>               mlog_errno(ret);
>>>>>>>>           return ERR_PTR(ret);
>>>>>>>>       }
>>>>>>>> +    if (!has_locked)
>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>>>> +    if (!has_locked) {
>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>>>> +    }
>>>>>>>>       brelse(di_bh);
>>>>>>>> +
>>>>>>>>       return acl;
>>>>>>>>   }
>>>>>>>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>>>>>>>> index c488965..62be75d 100644
>>>>>>>> --- a/fs/ocfs2/file.c
>>>>>>>> +++ b/fs/ocfs2/file.c
>>>>>>>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>>>       handle_t *handle = NULL;
>>>>>>>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>>>>>>>       int qtype;
>>>>>>>> +    int arg_flags = 0, had_lock;
>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>         trace_ocfs2_setattr(inode, dentry,
>>>>>>>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>>>>>>>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>>>           }
>>>>>>>>       }
>>>>>>>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>> +    if (had_lock)
>>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>>>       if (status < 0) {
>>>>>>>>           if (status != -ENOENT)
>>>>>>>>               mlog_errno(status);
>>>>>>>>           goto bail_unlock_rw;
>>>>>>>>       }
>>>>>>>> -    inode_locked = 1;
>>>>>>>> +    if (!had_lock) {
>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>> +        inode_locked = 1;
>>>>>>>> +    }
>>>>>>>>         if (size_change) {
>>>>>>>>           status = inode_newsize_ok(inode, attr->ia_size);
>>>>>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>>>   bail_commit:
>>>>>>>>       ocfs2_commit_trans(osb, handle);
>>>>>>>>   bail_unlock:
>>>>>>>> -    if (status) {
>>>>>>>> +    if (status && inode_locked) {
>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>>>>           inode_locked = 0;
>>>>>>>>       }
>>>>>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>>>           if (status < 0)
>>>>>>>>               mlog_errno(status);
>>>>>>>>       }
>>>>>>>> -    if (inode_locked)
>>>>>>>> +    if (inode_locked) {
>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>>>> +    }
>>>>>>>>         brelse(bh);
>>>>>>>>       return status;
>>>>>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>>>>>   int ocfs2_permission(struct inode *inode, int mask)
>>>>>>>>   {
>>>>>>>>       int ret;
>>>>>>>> +    int has_locked;
>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>         if (mask & MAY_NOT_BLOCK)
>>>>>>>>           return -ECHILD;
>>>>>>>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>>>> -    if (ret) {
>>>>>>>> -        if (ret != -ENOENT)
>>>>>>>> -            mlog_errno(ret);
>>>>>>>> -        goto out;
>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>> +    if (!has_locked) {
>>>>>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>>>> +        if (ret) {
>>>>>>>> +            if (ret != -ENOENT)
>>>>>>>> +                mlog_errno(ret);
>>>>>>>> +            goto out;
>>>>>>>> +        }
>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>       }
>>>>>>>>         ret = generic_permission(inode, mask);
>>>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>>>> +    if (!has_locked) {
>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>>>> +    }
>>>>>>>>   out:
>>>>>>>>       return ret;
>>>>>>>>   }
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-05 15:31 ` [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points Eric Ren
  2017-01-06  6:09   ` Joseph Qi
@ 2017-01-06 14:52   ` kbuild test robot
  2017-01-09  5:24     ` Eric Ren
  2017-01-06 17:53   ` kbuild test robot
  2017-01-13  4:22   ` Junxiao Bi
  3 siblings, 1 reply; 32+ messages in thread
From: kbuild test robot @ 2017-01-06 14:52 UTC (permalink / raw)
  To: Eric Ren
  Cc: kbuild-all, ocfs2-devel, akpm, mfasheh, jlbec, ghe, junxiao.bi,
	jiangqi903, zren, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 6696 bytes --]

Hi Eric,

[auto build test ERROR on linus/master]
[also build test ERROR on v4.10-rc2 next-20170106]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Eric-Ren/fix-deadlock-caused-by-recursive-cluster-locking/20170106-200837
config: ia64-allyesconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 6.2.0
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=ia64 

All errors (new ones prefixed by >>):

   In file included from fs/ocfs2/acl.c:31:0:
   fs/ocfs2/acl.c: In function 'ocfs2_iop_set_acl':
>> fs/ocfs2/dlmglue.h:189:29: error: inlining failed in call to always_inline 'ocfs2_is_locked_by_me': function body not available
    inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
                                ^~~~~~~~~~~~~~~~~~~~~
   fs/ocfs2/acl.c:292:16: note: called from here
     has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/ocfs2/acl.c:31:0:
>> fs/ocfs2/dlmglue.h:189:29: error: inlining failed in call to always_inline 'ocfs2_is_locked_by_me': function body not available
    inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
                                ^~~~~~~~~~~~~~~~~~~~~
   fs/ocfs2/acl.c:292:16: note: called from here
     has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/ocfs2/acl.c:31:0:
>> fs/ocfs2/dlmglue.h:185:13: error: inlining failed in call to always_inline 'ocfs2_add_holder': function body not available
    inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
                ^~~~~~~~~~~~~~~~
   fs/ocfs2/acl.c:302:3: note: called from here
      ocfs2_add_holder(lockres, &oh);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/ocfs2/acl.c:31:0:
>> fs/ocfs2/dlmglue.h:187:13: error: inlining failed in call to always_inline 'ocfs2_remove_holder': function body not available
    inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
                ^~~~~~~~~~~~~~~~~~~
   fs/ocfs2/acl.c:307:3: note: called from here
      ocfs2_remove_holder(lockres, &oh);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--
   In file included from arch/ia64/include/uapi/asm/intrinsics.h:21:0,
                    from arch/ia64/include/asm/intrinsics.h:10,
                    from arch/ia64/include/asm/bitops.h:18,
                    from include/linux/bitops.h:36,
                    from include/linux/kernel.h:10,
                    from include/linux/list.h:8,
                    from include/linux/wait.h:6,
                    from include/linux/fs.h:5,
                    from fs/ocfs2/file.c:27:
   fs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
   arch/ia64/include/uapi/asm/cmpxchg.h:56:2: warning: value computed is not used [-Wunused-value]
    ((__typeof__(*(ptr))) __xchg((unsigned long) (x), (ptr), sizeof(*(ptr))))
    ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   fs/ocfs2/file.c:2334:3: note: in expansion of macro 'xchg'
      xchg(&iocb->ki_complete, saved_ki_complete);
      ^~~~
   In file included from fs/ocfs2/file.c:49:0:
   fs/ocfs2/file.c: In function 'ocfs2_permission':
>> fs/ocfs2/dlmglue.h:189:29: error: inlining failed in call to always_inline 'ocfs2_is_locked_by_me': function body not available
    inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
                                ^~~~~~~~~~~~~~~~~~~~~
   fs/ocfs2/file.c:1345:16: note: called from here
     has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/ocfs2/file.c:49:0:
>> fs/ocfs2/dlmglue.h:189:29: error: inlining failed in call to always_inline 'ocfs2_is_locked_by_me': function body not available
    inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
                                ^~~~~~~~~~~~~~~~~~~~~
   fs/ocfs2/file.c:1345:16: note: called from here
     has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/ocfs2/file.c:49:0:
>> fs/ocfs2/dlmglue.h:185:13: error: inlining failed in call to always_inline 'ocfs2_add_holder': function body not available
    inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
                ^~~~~~~~~~~~~~~~
   fs/ocfs2/file.c:1353:3: note: called from here
      ocfs2_add_holder(lockres, &oh);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   In file included from fs/ocfs2/file.c:49:0:
>> fs/ocfs2/dlmglue.h:187:13: error: inlining failed in call to always_inline 'ocfs2_remove_holder': function body not available
    inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
                ^~~~~~~~~~~~~~~~~~~
   fs/ocfs2/file.c:1359:3: note: called from here
      ocfs2_remove_holder(lockres, &oh);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

vim +/ocfs2_is_locked_by_me +189 fs/ocfs2/dlmglue.h

63e0c48a Joel Becker 2008-01-30  179  void ocfs2_set_locking_protocol(void);
9fb5ed3a Eric Ren    2017-01-05  180  
9fb5ed3a Eric Ren    2017-01-05  181  /*
9fb5ed3a Eric Ren    2017-01-05  182   * Keep a list of processes who have interest in a lockres.
9fb5ed3a Eric Ren    2017-01-05  183   * Note: this is now only uesed for check recursive cluster lock.
9fb5ed3a Eric Ren    2017-01-05  184   */
9fb5ed3a Eric Ren    2017-01-05 @185  inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
9fb5ed3a Eric Ren    2017-01-05  186  			     struct ocfs2_holder *oh);
9fb5ed3a Eric Ren    2017-01-05 @187  inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
9fb5ed3a Eric Ren    2017-01-05  188  			     struct ocfs2_holder *oh);
9fb5ed3a Eric Ren    2017-01-05 @189  inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
9fb5ed3a Eric Ren    2017-01-05  190  
ccd979bd Mark Fasheh 2005-12-15  191  #endif	/* DLMGLUE_H */

:::::: The code at line 189 was first introduced by commit
:::::: 9fb5ed3abab2100ae8d99cee9b25fb92e3154224 ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock

:::::: TO: Eric Ren <zren@suse.com>
:::::: CC: 0day robot <fengguang.wu@intel.com>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 48810 bytes --]

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-05 15:31 ` [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points Eric Ren
  2017-01-06  6:09   ` Joseph Qi
  2017-01-06 14:52   ` kbuild test robot
@ 2017-01-06 17:53   ` kbuild test robot
  2017-01-13  4:22   ` Junxiao Bi
  3 siblings, 0 replies; 32+ messages in thread
From: kbuild test robot @ 2017-01-06 17:53 UTC (permalink / raw)
  To: Eric Ren
  Cc: kbuild-all, ocfs2-devel, akpm, mfasheh, jlbec, ghe, junxiao.bi,
	jiangqi903, zren, linux-kernel

Hi Eric,

[auto build test WARNING on linus/master]
[also build test WARNING on v4.10-rc2 next-20170106]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Eric-Ren/fix-deadlock-caused-by-recursive-cluster-locking/20170106-200837
reproduce:
        # apt-get install sparse
        make ARCH=x86_64 allmodconfig
        make C=1 CF=-D__CHECK_ENDIAN__


sparse warnings: (new ones prefixed by >>)

   include/linux/compiler.h:253:8: sparse: attribute 'no_sanitize_address': unknown attribute
>> fs/ocfs2/dlmglue.h:189:50: sparse: marked inline, but without a definition
   fs/ocfs2/dlmglue.h:185:29: sparse: marked inline, but without a definition
   fs/ocfs2/dlmglue.h:187:32: sparse: marked inline, but without a definition
>> fs/ocfs2/dlmglue.h:189:50: sparse: marked inline, but without a definition
   fs/ocfs2/dlmglue.h:185:29: sparse: marked inline, but without a definition
   fs/ocfs2/dlmglue.h:187:32: sparse: marked inline, but without a definition
--
   include/linux/compiler.h:253:8: sparse: attribute 'no_sanitize_address': unknown attribute
>> fs/ocfs2/dlmglue.h:189:50: sparse: marked inline, but without a definition
   fs/ocfs2/dlmglue.h:185:29: sparse: marked inline, but without a definition
   fs/ocfs2/dlmglue.h:187:32: sparse: marked inline, but without a definition
   fs/ocfs2/dlmglue.h:187:32: sparse: marked inline, but without a definition
>> fs/ocfs2/dlmglue.h:189:50: sparse: marked inline, but without a definition
   fs/ocfs2/dlmglue.h:185:29: sparse: marked inline, but without a definition
   fs/ocfs2/dlmglue.h:187:32: sparse: marked inline, but without a definition

vim +189 fs/ocfs2/dlmglue.h

34d024f8 Mark Fasheh 2007-09-24  173  void ocfs2_wake_downconvert_thread(struct ocfs2_super *osb);
ccd979bd Mark Fasheh 2005-12-15  174  
ccd979bd Mark Fasheh 2005-12-15  175  struct ocfs2_dlm_debug *ocfs2_new_dlm_debug(void);
ccd979bd Mark Fasheh 2005-12-15  176  void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug *dlm_debug);
ccd979bd Mark Fasheh 2005-12-15  177  
63e0c48a Joel Becker 2008-01-30  178  /* To set the locking protocol on module initialization */
63e0c48a Joel Becker 2008-01-30  179  void ocfs2_set_locking_protocol(void);
9fb5ed3a Eric Ren    2017-01-05  180  
9fb5ed3a Eric Ren    2017-01-05  181  /*
9fb5ed3a Eric Ren    2017-01-05  182   * Keep a list of processes who have interest in a lockres.
9fb5ed3a Eric Ren    2017-01-05  183   * Note: this is now only uesed for check recursive cluster lock.
9fb5ed3a Eric Ren    2017-01-05  184   */
9fb5ed3a Eric Ren    2017-01-05  185  inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
9fb5ed3a Eric Ren    2017-01-05  186  			     struct ocfs2_holder *oh);
9fb5ed3a Eric Ren    2017-01-05  187  inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
9fb5ed3a Eric Ren    2017-01-05  188  			     struct ocfs2_holder *oh);
9fb5ed3a Eric Ren    2017-01-05 @189  inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
9fb5ed3a Eric Ren    2017-01-05  190  
ccd979bd Mark Fasheh 2005-12-15  191  #endif	/* DLMGLUE_H */

:::::: The code at line 189 was first introduced by commit
:::::: 9fb5ed3abab2100ae8d99cee9b25fb92e3154224 ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock

:::::: TO: Eric Ren <zren@suse.com>
:::::: CC: 0day robot <fengguang.wu@intel.com>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-06 11:56                 ` Eric Ren
@ 2017-01-09  1:13                   ` Joseph Qi
  2017-01-09  2:13                     ` Eric Ren
  0 siblings, 1 reply; 32+ messages in thread
From: Joseph Qi @ 2017-01-09  1:13 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel


On 17/1/6 19:56, Eric Ren wrote:
> Hi!
>
> On 01/06/2017 05:55 PM, Joseph Qi wrote:
>> On 17/1/6 17:13, Eric Ren wrote:
>>> Hi,
>>>
>>>>>>>>>
>>>>>>>>> Fixes them by adding the tracking logic (in the previous 
>>>>>>>>> patch) for
>>>>>>>>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>>>>>>>>> ocfs2_setattr().
>>>>>>>> As described cases above, shall we just add the tracking logic 
>>>>>>>> only for set/get_acl()?
>>>>>>>
>>>>>>> The idea is to detect recursive locking on the running task 
>>>>>>> stack. Take case 1) for example if ocfs2_permisssion()
>>>>>>> is not changed:
>>>>>>>
>>>>>>> ocfs2_permission() <=== take PR, ocfs2_holder is not added
>>>>>>>    ocfs2_iop_get_acl <=== still take PR, because there is no 
>>>>>>> lock holder on the tracking list
>>>>>> I mean we have no need to check if locked by me, just do inode 
>>>>>> lock and add holder.
>>>>>> This will make code more clean, IMO.
>>>>> Oh, sorry, I get your point this time. I think we need to check it 
>>>>> if there are more than one processes that hold
>>>>> PR lock on the same resource.  If I don't understand you 
>>>>> correctly, please tell me why you think it's not neccessary
>>>>> to check before getting lock?
>>>> The code logic can only check if it is locked by myself. In the case
>>> Why only...?
>>>> described above, ocfs2_permission is the first entry to take inode 
>>>> lock.
>>>> And even if check succeeds, it is a bug without unlock, but not the 
>>>> case
>>>> of recursive lock.
>>>
>>> By checking succeeds, you mean it's locked by me, right? If so, this 
>>> flag
>>>                       "arg_flags = OCFS2_META_LOCK_GETBH"
>>> will be passed down to ocfs2_inode_lock_full(), which gets back 
>>> buffer head of
>>> the disk inode for us if necessary, but doesn't take cluster locking 
>>> again. So, there is
>>> no need to unlock in such case.
>> I am trying to state my point more clearly...
>
> Thanks a lot!
>
>> The issue case you are trying to fix is:
>> Process A
>> take inode lock (phase1)
>> ...
>> <<< race window (phase2, Process B)
>
> The deadlock only happens if process B is on a remote node and request 
> EX lock.
>
> Quote the patch[1/2]'s commit message:
>
> A deadlock will occur if a remote EX request comes in between two of
> ocfs2_inode_lock().  Briefly describe how the deadlock is formed:
>
> On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
> BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of
> the remote EX lock request.  Another hand, the recursive cluster lock 
> (the
> second one) will be blocked in in __ocfs2_cluster_lock() because of
> OCFS2_LOCK_BLOCKED.  But, the downconvert never complete, why? because
> there is no chance for the first cluster lock on this node to be unlocked
> - we block ourselves in the code path.
> ---
>
>> ...
>> take inode lock again (phase3)
>>
>> Deadlock happens because Process B in phase2 and Process A in phase3
>> are waiting for each other.
> It's local lock's (like i_mutex) responsibility to protect critical 
> section from racing
> among processes on the same node.
I know we are talking a cluster lock issue. And the Process B I described is
downconvert thread.
>
>> So you are trying to fix it by making phase3 finish without really doing
>
> Phase3 can go ahead because this node is already under protection of 
> cluster lock.
You said it was blocked...
"Another hand, the recursive cluster lock (the second one) will be 
blocked in
__ocfs2_cluster_lock() because of OCFS2_LOCK_BLOCKED."
>
>> __ocfs2_cluster_lock, then Process B can continue either.
>> Let us bear in mind that phase1 and phase3 are in the same context and
>> executed in order. That's why I think there is no need to check if 
>> locked
>> by myself in phase1.
>> If phase1 finds it is already locked by myself, that means the holder
>> is left by last operation without dec holder. That's why I think it 
>> is a bug
>> instead of a recursive lock case.
>
> Did I answer your question?
>
> Thanks!
> Eric
>
>>
>> Thanks,
>> Joseph
>>>
>>> Thanks,
>>> Eric
>>>
>>>>
>>>> Thanks,
>>>> Joseph
>>>>>
>>>>> Thanks,
>>>>> Eric
>>>>>>
>>>>>> Thanks,
>>>>>> Joseph
>>>>>>>
>>>>>>> Thanks for your review;-)
>>>>>>> Eric
>>>>>>>
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Joseph
>>>>>>>>>
>>>>>>>>> Signed-off-by: Eric Ren <zren@suse.com>
>>>>>>>>> ---
>>>>>>>>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>>>>>>>>   fs/ocfs2/file.c | 44 
>>>>>>>>> ++++++++++++++++++++++++++++++++++----------
>>>>>>>>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>>>>>>>>
>>>>>>>>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>>>>>>>>> index bed1fcb..c539890 100644
>>>>>>>>> --- a/fs/ocfs2/acl.c
>>>>>>>>> +++ b/fs/ocfs2/acl.c
>>>>>>>>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode 
>>>>>>>>> *inode, struct posix_acl *acl, int type)
>>>>>>>>>   {
>>>>>>>>>       struct buffer_head *bh = NULL;
>>>>>>>>>       int status = 0;
>>>>>>>>> -
>>>>>>>>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>>>>> +    int arg_flags = 0, has_locked;
>>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>> +
>>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>>> +    if (has_locked)
>>>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>>>>       if (status < 0) {
>>>>>>>>>           if (status != -ENOENT)
>>>>>>>>>               mlog_errno(status);
>>>>>>>>>           return status;
>>>>>>>>>       }
>>>>>>>>> +    if (!has_locked)
>>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>> +
>>>>>>>>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, 
>>>>>>>>> NULL);
>>>>>>>>> -    ocfs2_inode_unlock(inode, 1);
>>>>>>>>> +
>>>>>>>>> +    if (!has_locked) {
>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>> +        ocfs2_inode_unlock(inode, 1);
>>>>>>>>> +    }
>>>>>>>>>       brelse(bh);
>>>>>>>>> +
>>>>>>>>>       return status;
>>>>>>>>>   }
>>>>>>>>>   @@ -303,21 +318,35 @@ struct posix_acl 
>>>>>>>>> *ocfs2_iop_get_acl(struct inode *inode, int type)
>>>>>>>>>       struct buffer_head *di_bh = NULL;
>>>>>>>>>       struct posix_acl *acl;
>>>>>>>>>       int ret;
>>>>>>>>> +    int arg_flags = 0, has_locked;
>>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>>         osb = OCFS2_SB(inode->i_sb);
>>>>>>>>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>>>>>>>>           return NULL;
>>>>>>>>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>>>>>>>>> +
>>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>>> +    if (has_locked)
>>>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>>>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>>>>>>>>       if (ret < 0) {
>>>>>>>>>           if (ret != -ENOENT)
>>>>>>>>>               mlog_errno(ret);
>>>>>>>>>           return ERR_PTR(ret);
>>>>>>>>>       }
>>>>>>>>> +    if (!has_locked)
>>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>>>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>>>>> +    if (!has_locked) {
>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>>>>> +    }
>>>>>>>>>       brelse(di_bh);
>>>>>>>>> +
>>>>>>>>>       return acl;
>>>>>>>>>   }
>>>>>>>>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>>>>>>>>> index c488965..62be75d 100644
>>>>>>>>> --- a/fs/ocfs2/file.c
>>>>>>>>> +++ b/fs/ocfs2/file.c
>>>>>>>>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>>>>>> struct iattr *attr)
>>>>>>>>>       handle_t *handle = NULL;
>>>>>>>>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>>>>>>>>       int qtype;
>>>>>>>>> +    int arg_flags = 0, had_lock;
>>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>>         trace_ocfs2_setattr(inode, dentry,
>>>>>>>>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>>>>>>>>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry 
>>>>>>>>> *dentry, struct iattr *attr)
>>>>>>>>>           }
>>>>>>>>>       }
>>>>>>>>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>>> +    if (had_lock)
>>>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>>>>       if (status < 0) {
>>>>>>>>>           if (status != -ENOENT)
>>>>>>>>>               mlog_errno(status);
>>>>>>>>>           goto bail_unlock_rw;
>>>>>>>>>       }
>>>>>>>>> -    inode_locked = 1;
>>>>>>>>> +    if (!had_lock) {
>>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>> +        inode_locked = 1;
>>>>>>>>> +    }
>>>>>>>>>         if (size_change) {
>>>>>>>>>           status = inode_newsize_ok(inode, attr->ia_size);
>>>>>>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, 
>>>>>>>>> struct iattr *attr)
>>>>>>>>>   bail_commit:
>>>>>>>>>       ocfs2_commit_trans(osb, handle);
>>>>>>>>>   bail_unlock:
>>>>>>>>> -    if (status) {
>>>>>>>>> +    if (status && inode_locked) {
>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>>>>>           inode_locked = 0;
>>>>>>>>>       }
>>>>>>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry 
>>>>>>>>> *dentry, struct iattr *attr)
>>>>>>>>>           if (status < 0)
>>>>>>>>>               mlog_errno(status);
>>>>>>>>>       }
>>>>>>>>> -    if (inode_locked)
>>>>>>>>> +    if (inode_locked) {
>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>>>>> +    }
>>>>>>>>>         brelse(bh);
>>>>>>>>>       return status;
>>>>>>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>>>>>>   int ocfs2_permission(struct inode *inode, int mask)
>>>>>>>>>   {
>>>>>>>>>       int ret;
>>>>>>>>> +    int has_locked;
>>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>>         if (mask & MAY_NOT_BLOCK)
>>>>>>>>>           return -ECHILD;
>>>>>>>>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>>>>> -    if (ret) {
>>>>>>>>> -        if (ret != -ENOENT)
>>>>>>>>> -            mlog_errno(ret);
>>>>>>>>> -        goto out;
>>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>>> +    if (!has_locked) {
>>>>>>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>>>>> +        if (ret) {
>>>>>>>>> +            if (ret != -ENOENT)
>>>>>>>>> +                mlog_errno(ret);
>>>>>>>>> +            goto out;
>>>>>>>>> +        }
>>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>>       }
>>>>>>>>>         ret = generic_permission(inode, mask);
>>>>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>>>>> +    if (!has_locked) {
>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>>>>> +    }
>>>>>>>>>   out:
>>>>>>>>>       return ret;
>>>>>>>>>   }
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-09  1:13                   ` Joseph Qi
@ 2017-01-09  2:13                     ` Eric Ren
  2017-01-12 11:24                       ` [Ocfs2-devel] " Eric Ren
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-09  2:13 UTC (permalink / raw)
  To: Joseph Qi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, junxiao.bi, linux-kernel

Hi,

On 01/09/2017 09:13 AM, Joseph Qi wrote:
> ...
>>
>>> The issue case you are trying to fix is:
>>> Process A
>>> take inode lock (phase1)
>>> ...
>>> <<< race window (phase2, Process B)
>>
>> The deadlock only happens if process B is on a remote node and request EX lock.
>>
>> Quote the patch[1/2]'s commit message:
>>
>> A deadlock will occur if a remote EX request comes in between two of
>> ocfs2_inode_lock().  Briefly describe how the deadlock is formed:
>>
>> On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
>> BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of
>> the remote EX lock request.  Another hand, the recursive cluster lock (the
>> second one) will be blocked in in __ocfs2_cluster_lock() because of
>> OCFS2_LOCK_BLOCKED.  But, the downconvert never complete, why? because
>> there is no chance for the first cluster lock on this node to be unlocked
>> - we block ourselves in the code path.
>> ---
>>
>>> ...
>>> take inode lock again (phase3)
>>>
>>> Deadlock happens because Process B in phase2 and Process A in phase3
>>> are waiting for each other.
>> It's local lock's (like i_mutex) responsibility to protect critical section from racing
>> among processes on the same node.
> I know we are talking a cluster lock issue. And the Process B I described is
> downconvert thread.

That's fine!

>>
>>> So you are trying to fix it by making phase3 finish without really doing
>>
>> Phase3 can go ahead because this node is already under protection of cluster lock.
> You said it was blocked...

Oh, sorry, I meant phase3 can go ahead if this patch set is applied;-)

> "Another hand, the recursive cluster lock (the second one) will be blocked in
> __ocfs2_cluster_lock() because of OCFS2_LOCK_BLOCKED."
>>
>>> __ocfs2_cluster_lock, then Process B can continue either.
>>> Let us bear in mind that phase1 and phase3 are in the same context and
>>> executed in order. That's why I think there is no need to check if locked
>>> by myself in phase1.
Sorry, I still cannot see it. Without keeping track of the first cluster lock, how can we 
know if
we are under a context that has already been in the protecting of cluster lock? How can we 
handle
the recursive locking (the second cluster lock) if we don't have this information?
>>> If phase1 finds it is already locked by myself, that means the holder
>>> is left by last operation without dec holder. That's why I think it is a bug
>>> instead of a recursive lock case.
I think I got your point here. Do you mean that we should just add the lock holder at the 
first locking position
without checking before that? Unfortunately, it's tricky here to know exactly which ocfs2 
routine will be the first vfs
entry point, such as ocfs2_get_acl() which can be both the first vfs entry point and the 
second vfs entry point after
ocfs2_permission(), right?

It will be a coding bug if the problem you concern about happens. I think we don't need to 
worry about this much because
the code logic here is quite simple;-)

Thanks for your patience!
Eric

>>
>> Did I answer your question?
>>
>> Thanks!
>> Eric
>>
>>>
>>> Thanks,
>>> Joseph
>>>>
>>>> Thanks,
>>>> Eric
>>>>
>>>>>
>>>>> Thanks,
>>>>> Joseph
>>>>>>
>>>>>> Thanks,
>>>>>> Eric
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Joseph
>>>>>>>>
>>>>>>>> Thanks for your review;-)
>>>>>>>> Eric
>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> Joseph
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Eric Ren <zren@suse.com>
>>>>>>>>>> ---
>>>>>>>>>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>>>>>>>>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>>>>>>>>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>>>>>>>>>
>>>>>>>>>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>>>>>>>>>> index bed1fcb..c539890 100644
>>>>>>>>>> --- a/fs/ocfs2/acl.c
>>>>>>>>>> +++ b/fs/ocfs2/acl.c
>>>>>>>>>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl 
>>>>>>>>>> *acl, int type)
>>>>>>>>>>   {
>>>>>>>>>>       struct buffer_head *bh = NULL;
>>>>>>>>>>       int status = 0;
>>>>>>>>>> -
>>>>>>>>>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>>>>>> +    int arg_flags = 0, has_locked;
>>>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>>> +
>>>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>>>> +    if (has_locked)
>>>>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>>>>>       if (status < 0) {
>>>>>>>>>>           if (status != -ENOENT)
>>>>>>>>>>               mlog_errno(status);
>>>>>>>>>>           return status;
>>>>>>>>>>       }
>>>>>>>>>> +    if (!has_locked)
>>>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>>> +
>>>>>>>>>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
>>>>>>>>>> -    ocfs2_inode_unlock(inode, 1);
>>>>>>>>>> +
>>>>>>>>>> +    if (!has_locked) {
>>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>>> +        ocfs2_inode_unlock(inode, 1);
>>>>>>>>>> +    }
>>>>>>>>>>       brelse(bh);
>>>>>>>>>> +
>>>>>>>>>>       return status;
>>>>>>>>>>   }
>>>>>>>>>>   @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, 
>>>>>>>>>> int type)
>>>>>>>>>>       struct buffer_head *di_bh = NULL;
>>>>>>>>>>       struct posix_acl *acl;
>>>>>>>>>>       int ret;
>>>>>>>>>> +    int arg_flags = 0, has_locked;
>>>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>>>         osb = OCFS2_SB(inode->i_sb);
>>>>>>>>>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>>>>>>>>>           return NULL;
>>>>>>>>>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>>>>>>>>>> +
>>>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>>>> +    if (has_locked)
>>>>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>>>>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>>>>>>>>>       if (ret < 0) {
>>>>>>>>>>           if (ret != -ENOENT)
>>>>>>>>>>               mlog_errno(ret);
>>>>>>>>>>           return ERR_PTR(ret);
>>>>>>>>>>       }
>>>>>>>>>> +    if (!has_locked)
>>>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>>>>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>>>>>> +    if (!has_locked) {
>>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>>>>>> +    }
>>>>>>>>>>       brelse(di_bh);
>>>>>>>>>> +
>>>>>>>>>>       return acl;
>>>>>>>>>>   }
>>>>>>>>>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>>>>>>>>>> index c488965..62be75d 100644
>>>>>>>>>> --- a/fs/ocfs2/file.c
>>>>>>>>>> +++ b/fs/ocfs2/file.c
>>>>>>>>>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>>>>>       handle_t *handle = NULL;
>>>>>>>>>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>>>>>>>>>       int qtype;
>>>>>>>>>> +    int arg_flags = 0, had_lock;
>>>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>>>         trace_ocfs2_setattr(inode, dentry,
>>>>>>>>>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>>>>>>>>>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>>>>>           }
>>>>>>>>>>       }
>>>>>>>>>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>>>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>>>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>>>> +    if (had_lock)
>>>>>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>>>>>       if (status < 0) {
>>>>>>>>>>           if (status != -ENOENT)
>>>>>>>>>>               mlog_errno(status);
>>>>>>>>>>           goto bail_unlock_rw;
>>>>>>>>>>       }
>>>>>>>>>> -    inode_locked = 1;
>>>>>>>>>> +    if (!had_lock) {
>>>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>>> +        inode_locked = 1;
>>>>>>>>>> +    }
>>>>>>>>>>         if (size_change) {
>>>>>>>>>>           status = inode_newsize_ok(inode, attr->ia_size);
>>>>>>>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>>>>>   bail_commit:
>>>>>>>>>>       ocfs2_commit_trans(osb, handle);
>>>>>>>>>>   bail_unlock:
>>>>>>>>>> -    if (status) {
>>>>>>>>>> +    if (status && inode_locked) {
>>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>>>>>>           inode_locked = 0;
>>>>>>>>>>       }
>>>>>>>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>>>>>>>>>           if (status < 0)
>>>>>>>>>>               mlog_errno(status);
>>>>>>>>>>       }
>>>>>>>>>> -    if (inode_locked)
>>>>>>>>>> +    if (inode_locked) {
>>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>>>           ocfs2_inode_unlock(inode, 1);
>>>>>>>>>> +    }
>>>>>>>>>>         brelse(bh);
>>>>>>>>>>       return status;
>>>>>>>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>>>>>>>   int ocfs2_permission(struct inode *inode, int mask)
>>>>>>>>>>   {
>>>>>>>>>>       int ret;
>>>>>>>>>> +    int has_locked;
>>>>>>>>>> +    struct ocfs2_holder oh;
>>>>>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>>>>>         if (mask & MAY_NOT_BLOCK)
>>>>>>>>>>           return -ECHILD;
>>>>>>>>>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>>>>>> -    if (ret) {
>>>>>>>>>> -        if (ret != -ENOENT)
>>>>>>>>>> -            mlog_errno(ret);
>>>>>>>>>> -        goto out;
>>>>>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>>>>>>> +    if (!has_locked) {
>>>>>>>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>>>>>> +        if (ret) {
>>>>>>>>>> +            if (ret != -ENOENT)
>>>>>>>>>> +                mlog_errno(ret);
>>>>>>>>>> +            goto out;
>>>>>>>>>> +        }
>>>>>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>>>>>       }
>>>>>>>>>>         ret = generic_permission(inode, mask);
>>>>>>>>>>   -    ocfs2_inode_unlock(inode, 0);
>>>>>>>>>> +    if (!has_locked) {
>>>>>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>>>>>> +    }
>>>>>>>>>>   out:
>>>>>>>>>>       return ret;
>>>>>>>>>>   }
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-06 14:52   ` kbuild test robot
@ 2017-01-09  5:24     ` Eric Ren
  0 siblings, 0 replies; 32+ messages in thread
From: Eric Ren @ 2017-01-09  5:24 UTC (permalink / raw)
  To: kbuild test robot, fengguang.wu
  Cc: kbuild-all, ocfs2-devel, akpm, mfasheh, jlbec, ghe, junxiao.bi,
	jiangqi903, linux-kernel

Hi Fengguang,

On 01/06/2017 10:52 PM, kbuild test robot wrote:
> Hi Eric,
>
> [auto build test ERROR on linus/master]
> [also build test ERROR on v4.10-rc2 next-20170106]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url:    https://github.com/0day-ci/linux/commits/Eric-Ren/fix-deadlock-caused-by-recursive-cluster-locking/20170106-200837
> config: ia64-allyesconfig (attached as .config)
> compiler: ia64-linux-gcc (GCC) 6.2.0
> reproduce:
>          wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
>          chmod +x ~/bin/make.cross
>          # save the attached .config to linux build tree
>          make.cross ARCH=ia64

I failed to reproduce this issue locally by following the above instructions, after rebasing 
my patch set onto the lastest
mainline(Linux 4.10-rc3), only seeing this compiler error message:
"
test:/mnt/build/linux # make.cross ARCH=ia64
make CROSS_COMPILE=/opt/gcc-4.9.0-nolibc/ia64-linux/bin/ia64-linux- --jobs=4 ARCH=ia64
...
   CALL    scripts/checksyscalls.sh
<stdin>:1184:2: warning: #warning syscall perf_event_open not implemented [-Wcpp]
<stdin>:1238:2: warning: #warning syscall seccomp not implemented [-Wcpp]
<stdin>:1316:2: warning: #warning syscall pkey_mprotect not implemented [-Wcpp]
<stdin>:1319:2: warning: #warning syscall pkey_alloc not implemented [-Wcpp]
<stdin>:1322:2: warning: #warning syscall pkey_free not implemented [-Wcpp]
...
  AS      arch/ia64/kernel/gate.o
arch/ia64/kernel/entry.S: Assembler messages:
arch/ia64/kernel/entry.S:622: Error: Operand 2 of `adds' should be a 14-bit integer (-8192-8191)
arch/ia64/kernel/entry.S:729: Error: Operand 2 of `adds' should be a 14-bit integer (-8192-8191)
arch/ia64/kernel/entry.S:860: Error: Operand 2 of `adds' should be a 14-bit integer (-8192-8191)
make[1]: *** [scripts/Makefile.build:393: arch/ia64/kernel/entry.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:988: arch/ia64/kernel] Error 2
make: *** Waiting for unfinished jobs....
"

The obvious difference I noticed is my gcc version is little newer than kbuild, not sure if 
it's related:
"
test:/mnt/build/linux # gcc -v
gcc version 6.2.1 20160830 [gcc-6-branch revision 239856] (SUSE Linux)
"

>
> All errors (new ones prefixed by >>):
>
>     In file included from fs/ocfs2/acl.c:31:0:
>     fs/ocfs2/acl.c: In function 'ocfs2_iop_set_acl':
>>> fs/ocfs2/dlmglue.h:189:29: error: inlining failed in call to always_inline 'ocfs2_is_locked_by_me': function body not available
>      inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);

This error is probably because I should not add "inline" at the declaration while putting 
the function body into source file.
But, no error or warning occurred when I built and tested locally this way:
"
test:/mnt/build/linux/fs/ocfs2 # make -C /lib/modules/4.9.0-2-vanilla/build M=`pwd` modules
"

Anyway, I wanna make kbuild silent before resending again;-) Please correct me if I'm 
missing something?

Thanks!
Eric
>                                  ^~~~~~~~~~~~~~~~~~~~~
>     fs/ocfs2/acl.c:292:16: note: called from here
>       has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>     In file included from fs/ocfs2/acl.c:31:0:
>>> fs/ocfs2/dlmglue.h:189:29: error: inlining failed in call to always_inline 'ocfs2_is_locked_by_me': function body not available
>      inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
>                                  ^~~~~~~~~~~~~~~~~~~~~
>     fs/ocfs2/acl.c:292:16: note: called from here
>       has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>     In file included from fs/ocfs2/acl.c:31:0:
>>> fs/ocfs2/dlmglue.h:185:13: error: inlining failed in call to always_inline 'ocfs2_add_holder': function body not available
>      inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>                  ^~~~~~~~~~~~~~~~
>     fs/ocfs2/acl.c:302:3: note: called from here
>        ocfs2_add_holder(lockres, &oh);
>        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>     In file included from fs/ocfs2/acl.c:31:0:
>>> fs/ocfs2/dlmglue.h:187:13: error: inlining failed in call to always_inline 'ocfs2_remove_holder': function body not available
>      inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>                  ^~~~~~~~~~~~~~~~~~~
>     fs/ocfs2/acl.c:307:3: note: called from here
>        ocfs2_remove_holder(lockres, &oh);
>        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> --
>     In file included from arch/ia64/include/uapi/asm/intrinsics.h:21:0,
>                      from arch/ia64/include/asm/intrinsics.h:10,
>                      from arch/ia64/include/asm/bitops.h:18,
>                      from include/linux/bitops.h:36,
>                      from include/linux/kernel.h:10,
>                      from include/linux/list.h:8,
>                      from include/linux/wait.h:6,
>                      from include/linux/fs.h:5,
>                      from fs/ocfs2/file.c:27:
>     fs/ocfs2/file.c: In function 'ocfs2_file_write_iter':
>     arch/ia64/include/uapi/asm/cmpxchg.h:56:2: warning: value computed is not used [-Wunused-value]
>      ((__typeof__(*(ptr))) __xchg((unsigned long) (x), (ptr), sizeof(*(ptr))))
>      ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>     fs/ocfs2/file.c:2334:3: note: in expansion of macro 'xchg'
>        xchg(&iocb->ki_complete, saved_ki_complete);
>        ^~~~
>     In file included from fs/ocfs2/file.c:49:0:
>     fs/ocfs2/file.c: In function 'ocfs2_permission':
>>> fs/ocfs2/dlmglue.h:189:29: error: inlining failed in call to always_inline 'ocfs2_is_locked_by_me': function body not available
>      inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
>                                  ^~~~~~~~~~~~~~~~~~~~~
>     fs/ocfs2/file.c:1345:16: note: called from here
>       has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>     In file included from fs/ocfs2/file.c:49:0:
>>> fs/ocfs2/dlmglue.h:189:29: error: inlining failed in call to always_inline 'ocfs2_is_locked_by_me': function body not available
>      inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
>                                  ^~~~~~~~~~~~~~~~~~~~~
>     fs/ocfs2/file.c:1345:16: note: called from here
>       has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>     In file included from fs/ocfs2/file.c:49:0:
>>> fs/ocfs2/dlmglue.h:185:13: error: inlining failed in call to always_inline 'ocfs2_add_holder': function body not available
>      inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>                  ^~~~~~~~~~~~~~~~
>     fs/ocfs2/file.c:1353:3: note: called from here
>        ocfs2_add_holder(lockres, &oh);
>        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>     In file included from fs/ocfs2/file.c:49:0:
>>> fs/ocfs2/dlmglue.h:187:13: error: inlining failed in call to always_inline 'ocfs2_remove_holder': function body not available
>      inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>                  ^~~~~~~~~~~~~~~~~~~
>     fs/ocfs2/file.c:1359:3: note: called from here
>        ocfs2_remove_holder(lockres, &oh);
>        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> vim +/ocfs2_is_locked_by_me +189 fs/ocfs2/dlmglue.h
>
> 63e0c48a Joel Becker 2008-01-30  179  void ocfs2_set_locking_protocol(void);
> 9fb5ed3a Eric Ren    2017-01-05  180
> 9fb5ed3a Eric Ren    2017-01-05  181  /*
> 9fb5ed3a Eric Ren    2017-01-05  182   * Keep a list of processes who have interest in a lockres.
> 9fb5ed3a Eric Ren    2017-01-05  183   * Note: this is now only uesed for check recursive cluster lock.
> 9fb5ed3a Eric Ren    2017-01-05  184   */
> 9fb5ed3a Eric Ren    2017-01-05 @185  inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
> 9fb5ed3a Eric Ren    2017-01-05  186  			     struct ocfs2_holder *oh);
> 9fb5ed3a Eric Ren    2017-01-05 @187  inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
> 9fb5ed3a Eric Ren    2017-01-05  188  			     struct ocfs2_holder *oh);
> 9fb5ed3a Eric Ren    2017-01-05 @189  inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
> 9fb5ed3a Eric Ren    2017-01-05  190
> ccd979bd Mark Fasheh 2005-12-15  191  #endif	/* DLMGLUE_H */
>
> :::::: The code at line 189 was first introduced by commit
> :::::: 9fb5ed3abab2100ae8d99cee9b25fb92e3154224 ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
>
> :::::: TO: Eric Ren <zren@suse.com>
> :::::: CC: 0day robot <fengguang.wu@intel.com>
>
> ---
> 0-DAY kernel test infrastructure                Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [Ocfs2-devel] [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-09  2:13                     ` Eric Ren
@ 2017-01-12 11:24                       ` Eric Ren
  2017-01-12 11:36                         ` Joseph Qi
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-12 11:24 UTC (permalink / raw)
  To: Joseph Qi
  Cc: ocfs2-devel, linux-kernel, Andrew Morton, Joel Becker, Gang He,
	Junxiao Bi, mfasheh

Hi Joseph,

On 01/09/2017 10:13 AM, Eric Ren wrote:
>>>> So you are trying to fix it by making phase3 finish without really doing
>>> Phase3 can go ahead because this node is already under protection of cluster lock.
>> You said it was blocked...
> Oh, sorry, I meant phase3 can go ahead if this patch set is applied;-)
>
>> "Another hand, the recursive cluster lock (the second one) will be blocked in
>> __ocfs2_cluster_lock() because of OCFS2_LOCK_BLOCKED."
>>>> __ocfs2_cluster_lock, then Process B can continue either.
>>>> Let us bear in mind that phase1 and phase3 are in the same context and
>>>> executed in order. That's why I think there is no need to check if locked
>>>> by myself in phase1.
> Sorry, I still cannot see it. Without keeping track of the first cluster lock, how can we
> know if
> we are under a context that has already been in the protecting of cluster lock? How can we
> handle
> the recursive locking (the second cluster lock) if we don't have this information?
>>>> If phase1 finds it is already locked by myself, that means the holder
>>>> is left by last operation without dec holder. That's why I think it is a bug
>>>> instead of a recursive lock case.
> I think I got your point here. Do you mean that we should just add the lock holder at the
> first locking position
> without checking before that? Unfortunately, it's tricky here to know exactly which ocfs2
> routine will be the first vfs
> entry point, such as ocfs2_get_acl() which can be both the first vfs entry point and the
> second vfs entry point after
> ocfs2_permission(), right?
>
> It will be a coding bug if the problem you concern about happens. I think we don't need to
> worry about this much because
> the code logic here is quite simple;-)
Ping...

Did I clear your doubts by the last email? I really want to get your point, if not.

If there's any problem, I will fix them in the next version;-)

Thanks,
Eric

>
> Thanks for your patience!
> Eric
>
>>> D

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [Ocfs2-devel] [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-12 11:24                       ` [Ocfs2-devel] " Eric Ren
@ 2017-01-12 11:36                         ` Joseph Qi
  0 siblings, 0 replies; 32+ messages in thread
From: Joseph Qi @ 2017-01-12 11:36 UTC (permalink / raw)
  To: Eric Ren
  Cc: ocfs2-devel, linux-kernel, Andrew Morton, Joel Becker, Gang He,
	Junxiao Bi, mfasheh


On 17/1/12 19:24, Eric Ren wrote:
> Hi Joseph,
>
> On 01/09/2017 10:13 AM, Eric Ren wrote:
>>>>> So you are trying to fix it by making phase3 finish without really 
>>>>> doing
>>>> Phase3 can go ahead because this node is already under protection 
>>>> of cluster lock.
>>> You said it was blocked...
>> Oh, sorry, I meant phase3 can go ahead if this patch set is applied;-)
>>
>>> "Another hand, the recursive cluster lock (the second one) will be 
>>> blocked in
>>> __ocfs2_cluster_lock() because of OCFS2_LOCK_BLOCKED."
>>>>> __ocfs2_cluster_lock, then Process B can continue either.
>>>>> Let us bear in mind that phase1 and phase3 are in the same context 
>>>>> and
>>>>> executed in order. That's why I think there is no need to check if 
>>>>> locked
>>>>> by myself in phase1.
>> Sorry, I still cannot see it. Without keeping track of the first 
>> cluster lock, how can we
>> know if
>> we are under a context that has already been in the protecting of 
>> cluster lock? How can we
>> handle
>> the recursive locking (the second cluster lock) if we don't have this 
>> information?
>>>>> If phase1 finds it is already locked by myself, that means the holder
>>>>> is left by last operation without dec holder. That's why I think 
>>>>> it is a bug
>>>>> instead of a recursive lock case.
>> I think I got your point here. Do you mean that we should just add 
>> the lock holder at the
>> first locking position
>> without checking before that? Unfortunately, it's tricky here to know 
>> exactly which ocfs2
>> routine will be the first vfs
>> entry point, such as ocfs2_get_acl() which can be both the first vfs 
>> entry point and the
>> second vfs entry point after
>> ocfs2_permission(), right?
>>
>> It will be a coding bug if the problem you concern about happens. I 
>> think we don't need to
>> worry about this much because
>> the code logic here is quite simple;-)
> Ping...
>
> Did I clear your doubts by the last email? I really want to get your 
> point, if not.
>
> If there's any problem, I will fix them in the next version;-)
Yes, but I still worry about the code bug case will be hidden behind 
recursive lock...
Anyway, It depends on others...

Thanks,
Joseph
>
> Thanks,
> Eric
>
>>
>> Thanks for your patience!
>> Eric
>>
>>>> D
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  2017-01-05 15:31 ` [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock Eric Ren
  2017-01-06  6:07   ` Joseph Qi
@ 2017-01-13  3:59   ` Junxiao Bi
  2017-01-13  6:12     ` Eric Ren
  1 sibling, 1 reply; 32+ messages in thread
From: Junxiao Bi @ 2017-01-13  3:59 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

On 01/05/2017 11:31 PM, Eric Ren wrote:
> We are in the situation that we have to avoid recursive cluster locking,
> but there is no way to check if a cluster lock has been taken by a
> precess already.
> 
> Mostly, we can avoid recursive locking by writing code carefully.
> However, we found that it's very hard to handle the routines that
> are invoked directly by vfs code. For instance:
> 
> const struct inode_operations ocfs2_file_iops = {
>     .permission     = ocfs2_permission,
>     .get_acl        = ocfs2_iop_get_acl,
>     .set_acl        = ocfs2_iop_set_acl,
> };
> 
> Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):
> do_sys_open
>  may_open
>   inode_permission
>    ocfs2_permission
>     ocfs2_inode_lock() <=== first time
>      generic_permission
>       get_acl
>        ocfs2_iop_get_acl
> 	ocfs2_inode_lock() <=== recursive one
> 
> A deadlock will occur if a remote EX request comes in between two
> of ocfs2_inode_lock(). Briefly describe how the deadlock is formed:
> 
> On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
> BAST(ocfs2_generic_handle_bast) when downconvert is started
> on behalf of the remote EX lock request. Another hand, the recursive
> cluster lock (the second one) will be blocked in in __ocfs2_cluster_lock()
> because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why?
> because there is no chance for the first cluster lock on this node to be
> unlocked - we block ourselves in the code path.
> 
> The idea to fix this issue is mostly taken from gfs2 code.
> 1. introduce a new field: struct ocfs2_lock_res.l_holders, to
> keep track of the processes' pid  who has taken the cluster lock
> of this lock resource;
> 2. introduce a new flag for ocfs2_inode_lock_full: OCFS2_META_LOCK_GETBH;
> it means just getting back disk inode bh for us if we've got cluster lock.
> 3. export a helper: ocfs2_is_locked_by_me() is used to check if we
> have got the cluster lock in the upper code path.
> 
> The tracking logic should be used by some of the ocfs2 vfs's callbacks,
> to solve the recursive locking issue cuased by the fact that vfs routines
> can call into each other.
> 
> The performance penalty of processing the holder list should only be seen
> at a few cases where the tracking logic is used, such as get/set acl.
> 
> You may ask what if the first time we got a PR lock, and the second time
> we want a EX lock? fortunately, this case never happens in the real world,
> as far as I can see, including permission check, (get|set)_(acl|attr), and
> the gfs2 code also do so.
> 
> Signed-off-by: Eric Ren <zren@suse.com>
> ---
>  fs/ocfs2/dlmglue.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
>  fs/ocfs2/dlmglue.h | 18 ++++++++++++++++++
>  fs/ocfs2/ocfs2.h   |  1 +
>  3 files changed, 63 insertions(+), 3 deletions(-)
> 
> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
> index 83d576f..500bda4 100644
> --- a/fs/ocfs2/dlmglue.c
> +++ b/fs/ocfs2/dlmglue.c
> @@ -532,6 +532,7 @@ void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res)
>  	init_waitqueue_head(&res->l_event);
>  	INIT_LIST_HEAD(&res->l_blocked_list);
>  	INIT_LIST_HEAD(&res->l_mask_waiters);
> +	INIT_LIST_HEAD(&res->l_holders);
>  }
>  
>  void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res,
> @@ -749,6 +750,45 @@ void ocfs2_lock_res_free(struct ocfs2_lock_res *res)
>  	res->l_flags = 0UL;
>  }
>  
> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
> +				   struct ocfs2_holder *oh)
> +{
> +	INIT_LIST_HEAD(&oh->oh_list);
> +	oh->oh_owner_pid =  get_pid(task_pid(current));
struct pid(oh->oh_owner_pid) looks complicated here, why not use
task_struct(current) or pid_t(current->pid) directly? Also i didn't see
the ref count needs to be considered.

> +
> +	spin_lock(&lockres->l_lock);
> +	list_add_tail(&oh->oh_list, &lockres->l_holders);
> +	spin_unlock(&lockres->l_lock);
> +}
> +
> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
> +				       struct ocfs2_holder *oh)
> +{
> +	spin_lock(&lockres->l_lock);
> +	list_del(&oh->oh_list);
> +	spin_unlock(&lockres->l_lock);
> +
> +	put_pid(oh->oh_owner_pid);
same the above

> +}
> +
> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres)
Agree with Joseph, return bool looks better. I didn't see how that help
debug since the return value is not used.


> +{
> +	struct ocfs2_holder *oh;
> +	struct pid *pid;
> +
> +	/* look in the list of holders for one with the current task as owner */
> +	spin_lock(&lockres->l_lock);
> +	pid = task_pid(current);
> +	list_for_each_entry(oh, &lockres->l_holders, oh_list) {
> +		if (oh->oh_owner_pid == pid)
> +			goto out;
> +	}
> +	oh = NULL;
> +out:
> +	spin_unlock(&lockres->l_lock);
> +	return oh;
> +}
> +
>  static inline void ocfs2_inc_holders(struct ocfs2_lock_res *lockres,
>  				     int level)
>  {
> @@ -2333,8 +2373,9 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>  		goto getbh;
>  	}
>  
> -	if (ocfs2_mount_local(osb))
> -		goto local;
> +	if ((arg_flags & OCFS2_META_LOCK_GETBH) ||
> +	    ocfs2_mount_local(osb))
> +		goto update;
>  
>  	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>  		ocfs2_wait_for_recovery(osb);
> @@ -2363,7 +2404,7 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>  	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>  		ocfs2_wait_for_recovery(osb);
>  
> -local:
> +update:
>  	/*
>  	 * We only see this flag if we're being called from
>  	 * ocfs2_read_locked_inode(). It means we're locking an inode
> diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
> index d293a22..d65ff1e 100644
> --- a/fs/ocfs2/dlmglue.h
> +++ b/fs/ocfs2/dlmglue.h
> @@ -70,6 +70,11 @@ struct ocfs2_orphan_scan_lvb {
>  	__be32	lvb_os_seqno;
>  };
>  
> +struct ocfs2_holder {
will ocfs2_lock_holder more clearly? The same to the function name.

Thanks,
Junxiao.

> +	struct list_head oh_list;
> +	struct pid *oh_owner_pid;
> +};
> +
>  /* ocfs2_inode_lock_full() 'arg_flags' flags */
>  /* don't wait on recovery. */
>  #define OCFS2_META_LOCK_RECOVERY	(0x01)
> @@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
>  #define OCFS2_META_LOCK_NOQUEUE		(0x02)
>  /* don't block waiting for the downconvert thread, instead return -EAGAIN */
>  #define OCFS2_LOCK_NONBLOCK		(0x04)
> +/* just get back disk inode bh if we've got cluster lock. */
> +#define OCFS2_META_LOCK_GETBH		(0x08)
>  
>  /* Locking subclasses of inode cluster lock */
>  enum {
> @@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug *dlm_debug);
>  
>  /* To set the locking protocol on module initialization */
>  void ocfs2_set_locking_protocol(void);
> +
> +/*
> + * Keep a list of processes who have interest in a lockres.
> + * Note: this is now only uesed for check recursive cluster lock.
> + */
> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
> +			     struct ocfs2_holder *oh);
> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
> +			     struct ocfs2_holder *oh);
> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
> +
>  #endif	/* DLMGLUE_H */
> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
> index 7e5958b..0c39d71 100644
> --- a/fs/ocfs2/ocfs2.h
> +++ b/fs/ocfs2/ocfs2.h
> @@ -172,6 +172,7 @@ struct ocfs2_lock_res {
>  
>  	struct list_head         l_blocked_list;
>  	struct list_head         l_mask_waiters;
> +	struct list_head	 l_holders;
>  
>  	unsigned long		 l_flags;
>  	char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-05 15:31 ` [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points Eric Ren
                     ` (2 preceding siblings ...)
  2017-01-06 17:53   ` kbuild test robot
@ 2017-01-13  4:22   ` Junxiao Bi
  2017-01-13  6:19     ` Eric Ren
  3 siblings, 1 reply; 32+ messages in thread
From: Junxiao Bi @ 2017-01-13  4:22 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

On 01/05/2017 11:31 PM, Eric Ren wrote:
> Commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
> results in a deadlock, as the author "Tariq Saeed" realized shortly
> after the patch was merged. The discussion happened here
> (https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html).
> 
> The reason why taking cluster inode lock at vfs entry points opens up
> a self deadlock window, is explained in the previous patch of this
> series.
> 
> So far, we have seen two different code paths that have this issue.
> 1. do_sys_open
>      may_open
>       inode_permission
>        ocfs2_permission
>         ocfs2_inode_lock() <=== take PR
>          generic_permission
>           get_acl
>            ocfs2_iop_get_acl
>             ocfs2_inode_lock() <=== take PR
> 2. fchmod|fchmodat
>     chmod_common
>      notify_change
>       ocfs2_setattr <=== take EX
>        posix_acl_chmod
>         get_acl
>          ocfs2_iop_get_acl <=== take PR
>         ocfs2_iop_set_acl <=== take EX
> 
> Fixes them by adding the tracking logic (in the previous patch) for
> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
> ocfs2_setattr().
> 
> Signed-off-by: Eric Ren <zren@suse.com>
> ---
>  fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>  fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>  2 files changed, 68 insertions(+), 15 deletions(-)
> 
> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
> index bed1fcb..c539890 100644
> --- a/fs/ocfs2/acl.c
> +++ b/fs/ocfs2/acl.c
> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, int type)
>  {
>  	struct buffer_head *bh = NULL;
>  	int status = 0;
> -
> -	status = ocfs2_inode_lock(inode, &bh, 1);
> +	int arg_flags = 0, has_locked;
> +	struct ocfs2_holder oh;
> +	struct ocfs2_lock_res *lockres;
> +
> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
> +	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
> +	if (has_locked)
> +		arg_flags = OCFS2_META_LOCK_GETBH;
> +	status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>  	if (status < 0) {
>  		if (status != -ENOENT)
>  			mlog_errno(status);
>  		return status;
>  	}
> +	if (!has_locked)
> +		ocfs2_add_holder(lockres, &oh);
> +
>  	status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
> -	ocfs2_inode_unlock(inode, 1);
> +
> +	if (!has_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
> +		ocfs2_inode_unlock(inode, 1);
> +	}
>  	brelse(bh);
> +
>  	return status;
>  }
>  
> @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, int type)
>  	struct buffer_head *di_bh = NULL;
>  	struct posix_acl *acl;
>  	int ret;
> +	int arg_flags = 0, has_locked;
> +	struct ocfs2_holder oh;
> +	struct ocfs2_lock_res *lockres;
>  
>  	osb = OCFS2_SB(inode->i_sb);
>  	if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>  		return NULL;
> -	ret = ocfs2_inode_lock(inode, &di_bh, 0);
> +
> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
> +	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
> +	if (has_locked)
> +		arg_flags = OCFS2_META_LOCK_GETBH;
> +	ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>  	if (ret < 0) {
>  		if (ret != -ENOENT)
>  			mlog_errno(ret);
>  		return ERR_PTR(ret);
>  	}
> +	if (!has_locked)
> +		ocfs2_add_holder(lockres, &oh);
>  
>  	acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>  
> -	ocfs2_inode_unlock(inode, 0);
> +	if (!has_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
> +		ocfs2_inode_unlock(inode, 0);
> +	}
>  	brelse(di_bh);
> +
>  	return acl;
>  }
>  
> diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
> index c488965..62be75d 100644
> --- a/fs/ocfs2/file.c
> +++ b/fs/ocfs2/file.c
> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>  	handle_t *handle = NULL;
>  	struct dquot *transfer_to[MAXQUOTAS] = { };
>  	int qtype;
> +	int arg_flags = 0, had_lock;
> +	struct ocfs2_holder oh;
> +	struct ocfs2_lock_res *lockres;
>  
>  	trace_ocfs2_setattr(inode, dentry,
>  			    (unsigned long long)OCFS2_I(inode)->ip_blkno,
> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>  		}
>  	}
>  
> -	status = ocfs2_inode_lock(inode, &bh, 1);
> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
> +	had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);

If had_lock==true, it is a bug? I think we should BUG_ON for it, that
can help us catch bug at the first time.


> +	if (had_lock)
> +		arg_flags = OCFS2_META_LOCK_GETBH;
> +	status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>  	if (status < 0) {
>  		if (status != -ENOENT)
>  			mlog_errno(status);
>  		goto bail_unlock_rw;
>  	}
> -	inode_locked = 1;
> +	if (!had_lock) {
> +		ocfs2_add_holder(lockres, &oh);
> +		inode_locked = 1;
> +	}
>  
>  	if (size_change) {
>  		status = inode_newsize_ok(inode, attr->ia_size);
> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>  bail_commit:
>  	ocfs2_commit_trans(osb, handle);
>  bail_unlock:
> -	if (status) {
> +	if (status && inode_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
>  		ocfs2_inode_unlock(inode, 1);
>  		inode_locked = 0;
>  	}
> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>  		if (status < 0)
>  			mlog_errno(status);
>  	}
> -	if (inode_locked)
> +	if (inode_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
>  		ocfs2_inode_unlock(inode, 1);
> +	}
>  
>  	brelse(bh);
>  	return status;
> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>  int ocfs2_permission(struct inode *inode, int mask)
>  {
>  	int ret;
> +	int has_locked;
> +	struct ocfs2_holder oh;
> +	struct ocfs2_lock_res *lockres;
>  
>  	if (mask & MAY_NOT_BLOCK)
>  		return -ECHILD;
>  
> -	ret = ocfs2_inode_lock(inode, NULL, 0);
> -	if (ret) {
> -		if (ret != -ENOENT)
> -			mlog_errno(ret);
> -		goto out;
> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
> +	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);

The same thing as ocfs2_setattr.

Thanks,
Junxiao.
> +	if (!has_locked) {
> +		ret = ocfs2_inode_lock(inode, NULL, 0);
> +		if (ret) {
> +			if (ret != -ENOENT)
> +				mlog_errno(ret);
> +			goto out;
> +		}
> +		ocfs2_add_holder(lockres, &oh);
>  	}
>  
>  	ret = generic_permission(inode, mask);
>  
> -	ocfs2_inode_unlock(inode, 0);
> +	if (!has_locked) {
> +		ocfs2_remove_holder(lockres, &oh);
> +		ocfs2_inode_unlock(inode, 0);
> +	}
>  out:
>  	return ret;
>  }
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  2017-01-13  3:59   ` Junxiao Bi
@ 2017-01-13  6:12     ` Eric Ren
  2017-01-16  2:42       ` Junxiao Bi
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-13  6:12 UTC (permalink / raw)
  To: Junxiao Bi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

Hi Junxiao!

On 01/13/2017 11:59 AM, Junxiao Bi wrote:
> On 01/05/2017 11:31 PM, Eric Ren wrote:
>> We are in the situation that we have to avoid recursive cluster locking,
>> but there is no way to check if a cluster lock has been taken by a
>> precess already.
>>
>> Mostly, we can avoid recursive locking by writing code carefully.
>> However, we found that it's very hard to handle the routines that
>> are invoked directly by vfs code. For instance:
>>
>> const struct inode_operations ocfs2_file_iops = {
>>      .permission     = ocfs2_permission,
>>      .get_acl        = ocfs2_iop_get_acl,
>>      .set_acl        = ocfs2_iop_set_acl,
>> };
>>
>> Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):
>> do_sys_open
>>   may_open
>>    inode_permission
>>     ocfs2_permission
>>      ocfs2_inode_lock() <=== first time
>>       generic_permission
>>        get_acl
>>         ocfs2_iop_get_acl
>> 	ocfs2_inode_lock() <=== recursive one
>>
>> A deadlock will occur if a remote EX request comes in between two
>> of ocfs2_inode_lock(). Briefly describe how the deadlock is formed:
>>
>> On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
>> BAST(ocfs2_generic_handle_bast) when downconvert is started
>> on behalf of the remote EX lock request. Another hand, the recursive
>> cluster lock (the second one) will be blocked in in __ocfs2_cluster_lock()
>> because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why?
>> because there is no chance for the first cluster lock on this node to be
>> unlocked - we block ourselves in the code path.
>>
>> The idea to fix this issue is mostly taken from gfs2 code.
>> 1. introduce a new field: struct ocfs2_lock_res.l_holders, to
>> keep track of the processes' pid  who has taken the cluster lock
>> of this lock resource;
>> 2. introduce a new flag for ocfs2_inode_lock_full: OCFS2_META_LOCK_GETBH;
>> it means just getting back disk inode bh for us if we've got cluster lock.
>> 3. export a helper: ocfs2_is_locked_by_me() is used to check if we
>> have got the cluster lock in the upper code path.
>>
>> The tracking logic should be used by some of the ocfs2 vfs's callbacks,
>> to solve the recursive locking issue cuased by the fact that vfs routines
>> can call into each other.
>>
>> The performance penalty of processing the holder list should only be seen
>> at a few cases where the tracking logic is used, such as get/set acl.
>>
>> You may ask what if the first time we got a PR lock, and the second time
>> we want a EX lock? fortunately, this case never happens in the real world,
>> as far as I can see, including permission check, (get|set)_(acl|attr), and
>> the gfs2 code also do so.
>>
>> Signed-off-by: Eric Ren <zren@suse.com>
>> ---
>>   fs/ocfs2/dlmglue.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
>>   fs/ocfs2/dlmglue.h | 18 ++++++++++++++++++
>>   fs/ocfs2/ocfs2.h   |  1 +
>>   3 files changed, 63 insertions(+), 3 deletions(-)
>>
>> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
>> index 83d576f..500bda4 100644
>> --- a/fs/ocfs2/dlmglue.c
>> +++ b/fs/ocfs2/dlmglue.c
>> @@ -532,6 +532,7 @@ void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res)
>>   	init_waitqueue_head(&res->l_event);
>>   	INIT_LIST_HEAD(&res->l_blocked_list);
>>   	INIT_LIST_HEAD(&res->l_mask_waiters);
>> +	INIT_LIST_HEAD(&res->l_holders);
>>   }
>>   
>>   void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res,
>> @@ -749,6 +750,45 @@ void ocfs2_lock_res_free(struct ocfs2_lock_res *res)
>>   	res->l_flags = 0UL;
>>   }
>>   
>> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>> +				   struct ocfs2_holder *oh)
>> +{
>> +	INIT_LIST_HEAD(&oh->oh_list);
>> +	oh->oh_owner_pid =  get_pid(task_pid(current));
> struct pid(oh->oh_owner_pid) looks complicated here, why not use
> task_struct(current) or pid_t(current->pid) directly? Also i didn't see
> the ref count needs to be considered.

This is learned from gfs2 code, which is tested by practice. So, I think it's not bad
to keep it;-)

>
>> +
>> +	spin_lock(&lockres->l_lock);
>> +	list_add_tail(&oh->oh_list, &lockres->l_holders);
>> +	spin_unlock(&lockres->l_lock);
>> +}
>> +
>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>> +				       struct ocfs2_holder *oh)
>> +{
>> +	spin_lock(&lockres->l_lock);
>> +	list_del(&oh->oh_list);
>> +	spin_unlock(&lockres->l_lock);
>> +
>> +	put_pid(oh->oh_owner_pid);
> same the above
>
>> +}
>> +
>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres)
> Agree with Joseph, return bool looks better. I didn't see how that help
> debug since the return value is not used.
>
>
>> +{
>> +	struct ocfs2_holder *oh;
>> +	struct pid *pid;
>> +
>> +	/* look in the list of holders for one with the current task as owner */
>> +	spin_lock(&lockres->l_lock);
>> +	pid = task_pid(current);
>> +	list_for_each_entry(oh, &lockres->l_holders, oh_list) {
>> +		if (oh->oh_owner_pid == pid)
>> +			goto out;
>> +	}
>> +	oh = NULL;
>> +out:
>> +	spin_unlock(&lockres->l_lock);
>> +	return oh;
>> +}
>> +
>>   static inline void ocfs2_inc_holders(struct ocfs2_lock_res *lockres,
>>   				     int level)
>>   {
>> @@ -2333,8 +2373,9 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>>   		goto getbh;
>>   	}
>>   
>> -	if (ocfs2_mount_local(osb))
>> -		goto local;
>> +	if ((arg_flags & OCFS2_META_LOCK_GETBH) ||
>> +	    ocfs2_mount_local(osb))
>> +		goto update;
>>   
>>   	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>   		ocfs2_wait_for_recovery(osb);
>> @@ -2363,7 +2404,7 @@ int ocfs2_inode_lock_full_nested(struct inode *inode,
>>   	if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>   		ocfs2_wait_for_recovery(osb);
>>   
>> -local:
>> +update:
>>   	/*
>>   	 * We only see this flag if we're being called from
>>   	 * ocfs2_read_locked_inode(). It means we're locking an inode
>> diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
>> index d293a22..d65ff1e 100644
>> --- a/fs/ocfs2/dlmglue.h
>> +++ b/fs/ocfs2/dlmglue.h
>> @@ -70,6 +70,11 @@ struct ocfs2_orphan_scan_lvb {
>>   	__be32	lvb_os_seqno;
>>   };
>>   
>> +struct ocfs2_holder {
> will ocfs2_lock_holder more clearly? The same to the function name.
OK, good suggestion. Hrm, but in order to align with "ocfs2_inc_holders", I
think it's good to keep those function names as it is;-)

Thanks for your review!
Eric

>
> Thanks,
> Junxiao.
>
>> +	struct list_head oh_list;
>> +	struct pid *oh_owner_pid;
>> +};
>> +
>>   /* ocfs2_inode_lock_full() 'arg_flags' flags */
>>   /* don't wait on recovery. */
>>   #define OCFS2_META_LOCK_RECOVERY	(0x01)
>> @@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
>>   #define OCFS2_META_LOCK_NOQUEUE		(0x02)
>>   /* don't block waiting for the downconvert thread, instead return -EAGAIN */
>>   #define OCFS2_LOCK_NONBLOCK		(0x04)
>> +/* just get back disk inode bh if we've got cluster lock. */
>> +#define OCFS2_META_LOCK_GETBH		(0x08)
>>   
>>   /* Locking subclasses of inode cluster lock */
>>   enum {
>> @@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug *dlm_debug);
>>   
>>   /* To set the locking protocol on module initialization */
>>   void ocfs2_set_locking_protocol(void);
>> +
>> +/*
>> + * Keep a list of processes who have interest in a lockres.
>> + * Note: this is now only uesed for check recursive cluster lock.
>> + */
>> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>> +			     struct ocfs2_holder *oh);
>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>> +			     struct ocfs2_holder *oh);
>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct ocfs2_lock_res *lockres);
>> +
>>   #endif	/* DLMGLUE_H */
>> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
>> index 7e5958b..0c39d71 100644
>> --- a/fs/ocfs2/ocfs2.h
>> +++ b/fs/ocfs2/ocfs2.h
>> @@ -172,6 +172,7 @@ struct ocfs2_lock_res {
>>   
>>   	struct list_head         l_blocked_list;
>>   	struct list_head         l_mask_waiters;
>> +	struct list_head	 l_holders;
>>   
>>   	unsigned long		 l_flags;
>>   	char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-13  4:22   ` Junxiao Bi
@ 2017-01-13  6:19     ` Eric Ren
  2017-01-16  2:46       ` Junxiao Bi
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-13  6:19 UTC (permalink / raw)
  To: Junxiao Bi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

Hi!

On 01/13/2017 12:22 PM, Junxiao Bi wrote:
> On 01/05/2017 11:31 PM, Eric Ren wrote:
>> Commit 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
>> results in a deadlock, as the author "Tariq Saeed" realized shortly
>> after the patch was merged. The discussion happened here
>> (https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html).
>>
>> The reason why taking cluster inode lock at vfs entry points opens up
>> a self deadlock window, is explained in the previous patch of this
>> series.
>>
>> So far, we have seen two different code paths that have this issue.
>> 1. do_sys_open
>>       may_open
>>        inode_permission
>>         ocfs2_permission
>>          ocfs2_inode_lock() <=== take PR
>>           generic_permission
>>            get_acl
>>             ocfs2_iop_get_acl
>>              ocfs2_inode_lock() <=== take PR
>> 2. fchmod|fchmodat
>>      chmod_common
>>       notify_change
>>        ocfs2_setattr <=== take EX
>>         posix_acl_chmod
>>          get_acl
>>           ocfs2_iop_get_acl <=== take PR
>>          ocfs2_iop_set_acl <=== take EX
>>
>> Fixes them by adding the tracking logic (in the previous patch) for
>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>> ocfs2_setattr().
>>
>> Signed-off-by: Eric Ren <zren@suse.com>
>> ---
>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>
>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>> index bed1fcb..c539890 100644
>> --- a/fs/ocfs2/acl.c
>> +++ b/fs/ocfs2/acl.c
>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, int type)
>>   {
>>   	struct buffer_head *bh = NULL;
>>   	int status = 0;
>> -
>> -	status = ocfs2_inode_lock(inode, &bh, 1);
>> +	int arg_flags = 0, has_locked;
>> +	struct ocfs2_holder oh;
>> +	struct ocfs2_lock_res *lockres;
>> +
>> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
>> +	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>> +	if (has_locked)
>> +		arg_flags = OCFS2_META_LOCK_GETBH;
>> +	status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>   	if (status < 0) {
>>   		if (status != -ENOENT)
>>   			mlog_errno(status);
>>   		return status;
>>   	}
>> +	if (!has_locked)
>> +		ocfs2_add_holder(lockres, &oh);
>> +
>>   	status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
>> -	ocfs2_inode_unlock(inode, 1);
>> +
>> +	if (!has_locked) {
>> +		ocfs2_remove_holder(lockres, &oh);
>> +		ocfs2_inode_unlock(inode, 1);
>> +	}
>>   	brelse(bh);
>> +
>>   	return status;
>>   }
>>   
>> @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct inode *inode, int type)
>>   	struct buffer_head *di_bh = NULL;
>>   	struct posix_acl *acl;
>>   	int ret;
>> +	int arg_flags = 0, has_locked;
>> +	struct ocfs2_holder oh;
>> +	struct ocfs2_lock_res *lockres;
>>   
>>   	osb = OCFS2_SB(inode->i_sb);
>>   	if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>   		return NULL;
>> -	ret = ocfs2_inode_lock(inode, &di_bh, 0);
>> +
>> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
>> +	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>> +	if (has_locked)
>> +		arg_flags = OCFS2_META_LOCK_GETBH;
>> +	ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>   	if (ret < 0) {
>>   		if (ret != -ENOENT)
>>   			mlog_errno(ret);
>>   		return ERR_PTR(ret);
>>   	}
>> +	if (!has_locked)
>> +		ocfs2_add_holder(lockres, &oh);
>>   
>>   	acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>   
>> -	ocfs2_inode_unlock(inode, 0);
>> +	if (!has_locked) {
>> +		ocfs2_remove_holder(lockres, &oh);
>> +		ocfs2_inode_unlock(inode, 0);
>> +	}
>>   	brelse(di_bh);
>> +
>>   	return acl;
>>   }
>>   
>> diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>> index c488965..62be75d 100644
>> --- a/fs/ocfs2/file.c
>> +++ b/fs/ocfs2/file.c
>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>   	handle_t *handle = NULL;
>>   	struct dquot *transfer_to[MAXQUOTAS] = { };
>>   	int qtype;
>> +	int arg_flags = 0, had_lock;
>> +	struct ocfs2_holder oh;
>> +	struct ocfs2_lock_res *lockres;
>>   
>>   	trace_ocfs2_setattr(inode, dentry,
>>   			    (unsigned long long)OCFS2_I(inode)->ip_blkno,
>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>   		}
>>   	}
>>   
>> -	status = ocfs2_inode_lock(inode, &bh, 1);
>> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
>> +	had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
> If had_lock==true, it is a bug? I think we should BUG_ON for it, that
> can help us catch bug at the first time.

Good idea! But I'm not sure if "ocfs2_setattr" is always the first one who takes the cluster 
lock.
It's harder for me to name all the possible paths;-/

>
>
>> +	if (had_lock)
>> +		arg_flags = OCFS2_META_LOCK_GETBH;
>> +	status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>   	if (status < 0) {
>>   		if (status != -ENOENT)
>>   			mlog_errno(status);
>>   		goto bail_unlock_rw;
>>   	}
>> -	inode_locked = 1;
>> +	if (!had_lock) {
>> +		ocfs2_add_holder(lockres, &oh);
>> +		inode_locked = 1;
>> +	}
>>   
>>   	if (size_change) {
>>   		status = inode_newsize_ok(inode, attr->ia_size);
>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>   bail_commit:
>>   	ocfs2_commit_trans(osb, handle);
>>   bail_unlock:
>> -	if (status) {
>> +	if (status && inode_locked) {
>> +		ocfs2_remove_holder(lockres, &oh);
>>   		ocfs2_inode_unlock(inode, 1);
>>   		inode_locked = 0;
>>   	}
>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
>>   		if (status < 0)
>>   			mlog_errno(status);
>>   	}
>> -	if (inode_locked)
>> +	if (inode_locked) {
>> +		ocfs2_remove_holder(lockres, &oh);
>>   		ocfs2_inode_unlock(inode, 1);
>> +	}
>>   
>>   	brelse(bh);
>>   	return status;
>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>   int ocfs2_permission(struct inode *inode, int mask)
>>   {
>>   	int ret;
>> +	int has_locked;
>> +	struct ocfs2_holder oh;
>> +	struct ocfs2_lock_res *lockres;
>>   
>>   	if (mask & MAY_NOT_BLOCK)
>>   		return -ECHILD;
>>   
>> -	ret = ocfs2_inode_lock(inode, NULL, 0);
>> -	if (ret) {
>> -		if (ret != -ENOENT)
>> -			mlog_errno(ret);
>> -		goto out;
>> +	lockres = &OCFS2_I(inode)->ip_inode_lockres;
>> +	has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
> The same thing as ocfs2_setattr.
OK. I will think over your suggestions!

Thanks,
Eric

>
> Thanks,
> Junxiao.
>> +	if (!has_locked) {
>> +		ret = ocfs2_inode_lock(inode, NULL, 0);
>> +		if (ret) {
>> +			if (ret != -ENOENT)
>> +				mlog_errno(ret);
>> +			goto out;
>> +		}
>> +		ocfs2_add_holder(lockres, &oh);
>>   	}
>>   
>>   	ret = generic_permission(inode, mask);
>>   
>> -	ocfs2_inode_unlock(inode, 0);
>> +	if (!has_locked) {
>> +		ocfs2_remove_holder(lockres, &oh);
>> +		ocfs2_inode_unlock(inode, 0);
>> +	}
>>   out:
>>   	return ret;
>>   }
>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  2017-01-13  6:12     ` Eric Ren
@ 2017-01-16  2:42       ` Junxiao Bi
  2017-01-16  3:31         ` Eric Ren
  0 siblings, 1 reply; 32+ messages in thread
From: Junxiao Bi @ 2017-01-16  2:42 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

On 01/13/2017 02:12 PM, Eric Ren wrote:
> Hi Junxiao!
> 
> On 01/13/2017 11:59 AM, Junxiao Bi wrote:
>> On 01/05/2017 11:31 PM, Eric Ren wrote:
>>> We are in the situation that we have to avoid recursive cluster locking,
>>> but there is no way to check if a cluster lock has been taken by a
>>> precess already.
>>>
>>> Mostly, we can avoid recursive locking by writing code carefully.
>>> However, we found that it's very hard to handle the routines that
>>> are invoked directly by vfs code. For instance:
>>>
>>> const struct inode_operations ocfs2_file_iops = {
>>>      .permission     = ocfs2_permission,
>>>      .get_acl        = ocfs2_iop_get_acl,
>>>      .set_acl        = ocfs2_iop_set_acl,
>>> };
>>>
>>> Both ocfs2_permission() and ocfs2_iop_get_acl() call
>>> ocfs2_inode_lock(PR):
>>> do_sys_open
>>>   may_open
>>>    inode_permission
>>>     ocfs2_permission
>>>      ocfs2_inode_lock() <=== first time
>>>       generic_permission
>>>        get_acl
>>>         ocfs2_iop_get_acl
>>>     ocfs2_inode_lock() <=== recursive one
>>>
>>> A deadlock will occur if a remote EX request comes in between two
>>> of ocfs2_inode_lock(). Briefly describe how the deadlock is formed:
>>>
>>> On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
>>> BAST(ocfs2_generic_handle_bast) when downconvert is started
>>> on behalf of the remote EX lock request. Another hand, the recursive
>>> cluster lock (the second one) will be blocked in in
>>> __ocfs2_cluster_lock()
>>> because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why?
>>> because there is no chance for the first cluster lock on this node to be
>>> unlocked - we block ourselves in the code path.
>>>
>>> The idea to fix this issue is mostly taken from gfs2 code.
>>> 1. introduce a new field: struct ocfs2_lock_res.l_holders, to
>>> keep track of the processes' pid  who has taken the cluster lock
>>> of this lock resource;
>>> 2. introduce a new flag for ocfs2_inode_lock_full:
>>> OCFS2_META_LOCK_GETBH;
>>> it means just getting back disk inode bh for us if we've got cluster
>>> lock.
>>> 3. export a helper: ocfs2_is_locked_by_me() is used to check if we
>>> have got the cluster lock in the upper code path.
>>>
>>> The tracking logic should be used by some of the ocfs2 vfs's callbacks,
>>> to solve the recursive locking issue cuased by the fact that vfs
>>> routines
>>> can call into each other.
>>>
>>> The performance penalty of processing the holder list should only be
>>> seen
>>> at a few cases where the tracking logic is used, such as get/set acl.
>>>
>>> You may ask what if the first time we got a PR lock, and the second time
>>> we want a EX lock? fortunately, this case never happens in the real
>>> world,
>>> as far as I can see, including permission check,
>>> (get|set)_(acl|attr), and
>>> the gfs2 code also do so.
>>>
>>> Signed-off-by: Eric Ren <zren@suse.com>
>>> ---
>>>   fs/ocfs2/dlmglue.c | 47
>>> ++++++++++++++++++++++++++++++++++++++++++++---
>>>   fs/ocfs2/dlmglue.h | 18 ++++++++++++++++++
>>>   fs/ocfs2/ocfs2.h   |  1 +
>>>   3 files changed, 63 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
>>> index 83d576f..500bda4 100644
>>> --- a/fs/ocfs2/dlmglue.c
>>> +++ b/fs/ocfs2/dlmglue.c
>>> @@ -532,6 +532,7 @@ void ocfs2_lock_res_init_once(struct
>>> ocfs2_lock_res *res)
>>>       init_waitqueue_head(&res->l_event);
>>>       INIT_LIST_HEAD(&res->l_blocked_list);
>>>       INIT_LIST_HEAD(&res->l_mask_waiters);
>>> +    INIT_LIST_HEAD(&res->l_holders);
>>>   }
>>>     void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res,
>>> @@ -749,6 +750,45 @@ void ocfs2_lock_res_free(struct ocfs2_lock_res
>>> *res)
>>>       res->l_flags = 0UL;
>>>   }
>>>   +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>>> +                   struct ocfs2_holder *oh)
>>> +{
>>> +    INIT_LIST_HEAD(&oh->oh_list);
>>> +    oh->oh_owner_pid =  get_pid(task_pid(current));
>> struct pid(oh->oh_owner_pid) looks complicated here, why not use
>> task_struct(current) or pid_t(current->pid) directly? Also i didn't see
>> the ref count needs to be considered.
> 
> This is learned from gfs2 code, which is tested by practice. So, I think
> it's not bad
> to keep it;-)
> 
>>
>>> +
>>> +    spin_lock(&lockres->l_lock);
>>> +    list_add_tail(&oh->oh_list, &lockres->l_holders);
>>> +    spin_unlock(&lockres->l_lock);
>>> +}
>>> +
>>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>>> +                       struct ocfs2_holder *oh)
>>> +{
>>> +    spin_lock(&lockres->l_lock);
>>> +    list_del(&oh->oh_list);
>>> +    spin_unlock(&lockres->l_lock);
>>> +
>>> +    put_pid(oh->oh_owner_pid);
>> same the above
>>
>>> +}
>>> +
>>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct
>>> ocfs2_lock_res *lockres)
>> Agree with Joseph, return bool looks better. I didn't see how that help
>> debug since the return value is not used.
>>
>>
>>> +{
>>> +    struct ocfs2_holder *oh;
>>> +    struct pid *pid;
>>> +
>>> +    /* look in the list of holders for one with the current task as
>>> owner */
>>> +    spin_lock(&lockres->l_lock);
>>> +    pid = task_pid(current);
>>> +    list_for_each_entry(oh, &lockres->l_holders, oh_list) {
>>> +        if (oh->oh_owner_pid == pid)
>>> +            goto out;
>>> +    }
>>> +    oh = NULL;
>>> +out:
>>> +    spin_unlock(&lockres->l_lock);
>>> +    return oh;
>>> +}
>>> +
>>>   static inline void ocfs2_inc_holders(struct ocfs2_lock_res *lockres,
>>>                        int level)
>>>   {
>>> @@ -2333,8 +2373,9 @@ int ocfs2_inode_lock_full_nested(struct inode
>>> *inode,
>>>           goto getbh;
>>>       }
>>>   -    if (ocfs2_mount_local(osb))
>>> -        goto local;
>>> +    if ((arg_flags & OCFS2_META_LOCK_GETBH) ||
>>> +        ocfs2_mount_local(osb))
>>> +        goto update;
>>>         if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>>           ocfs2_wait_for_recovery(osb);
>>> @@ -2363,7 +2404,7 @@ int ocfs2_inode_lock_full_nested(struct inode
>>> *inode,
>>>       if (!(arg_flags & OCFS2_META_LOCK_RECOVERY))
>>>           ocfs2_wait_for_recovery(osb);
>>>   -local:
>>> +update:
>>>       /*
>>>        * We only see this flag if we're being called from
>>>        * ocfs2_read_locked_inode(). It means we're locking an inode
>>> diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
>>> index d293a22..d65ff1e 100644
>>> --- a/fs/ocfs2/dlmglue.h
>>> +++ b/fs/ocfs2/dlmglue.h
>>> @@ -70,6 +70,11 @@ struct ocfs2_orphan_scan_lvb {
>>>       __be32    lvb_os_seqno;
>>>   };
>>>   +struct ocfs2_holder {
>> will ocfs2_lock_holder more clearly? The same to the function name.
> OK, good suggestion. Hrm, but in order to align with "ocfs2_inc_holders", I
> think it's good to keep those function names as it is;-)
that name is also not very clear. Maybe you can make another patch to
clear it.

Thanks,
Junxiao.


> 
> Thanks for your review!
> Eric
> 
>>
>> Thanks,
>> Junxiao.
>>
>>> +    struct list_head oh_list;
>>> +    struct pid *oh_owner_pid;
>>> +};
>>> +
>>>   /* ocfs2_inode_lock_full() 'arg_flags' flags */
>>>   /* don't wait on recovery. */
>>>   #define OCFS2_META_LOCK_RECOVERY    (0x01)
>>> @@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
>>>   #define OCFS2_META_LOCK_NOQUEUE        (0x02)
>>>   /* don't block waiting for the downconvert thread, instead return
>>> -EAGAIN */
>>>   #define OCFS2_LOCK_NONBLOCK        (0x04)
>>> +/* just get back disk inode bh if we've got cluster lock. */
>>> +#define OCFS2_META_LOCK_GETBH        (0x08)
>>>     /* Locking subclasses of inode cluster lock */
>>>   enum {
>>> @@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug
>>> *dlm_debug);
>>>     /* To set the locking protocol on module initialization */
>>>   void ocfs2_set_locking_protocol(void);
>>> +
>>> +/*
>>> + * Keep a list of processes who have interest in a lockres.
>>> + * Note: this is now only uesed for check recursive cluster lock.
>>> + */
>>> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>>> +                 struct ocfs2_holder *oh);
>>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>>> +                 struct ocfs2_holder *oh);
>>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct
>>> ocfs2_lock_res *lockres);
>>> +
>>>   #endif    /* DLMGLUE_H */
>>> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
>>> index 7e5958b..0c39d71 100644
>>> --- a/fs/ocfs2/ocfs2.h
>>> +++ b/fs/ocfs2/ocfs2.h
>>> @@ -172,6 +172,7 @@ struct ocfs2_lock_res {
>>>         struct list_head         l_blocked_list;
>>>       struct list_head         l_mask_waiters;
>>> +    struct list_head     l_holders;
>>>         unsigned long         l_flags;
>>>       char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
>>>
>>
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-13  6:19     ` Eric Ren
@ 2017-01-16  2:46       ` Junxiao Bi
  2017-01-16  3:06         ` Eric Ren
  0 siblings, 1 reply; 32+ messages in thread
From: Junxiao Bi @ 2017-01-16  2:46 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

On 01/13/2017 02:19 PM, Eric Ren wrote:
> Hi!
> 
> On 01/13/2017 12:22 PM, Junxiao Bi wrote:
>> On 01/05/2017 11:31 PM, Eric Ren wrote:
>>> Commit 743b5f1434f5 ("ocfs2: take inode lock in
>>> ocfs2_iop_set/get_acl()")
>>> results in a deadlock, as the author "Tariq Saeed" realized shortly
>>> after the patch was merged. The discussion happened here
>>> (https://oss.oracle.com/pipermail/ocfs2-devel/2015-September/011085.html).
>>>
>>>
>>> The reason why taking cluster inode lock at vfs entry points opens up
>>> a self deadlock window, is explained in the previous patch of this
>>> series.
>>>
>>> So far, we have seen two different code paths that have this issue.
>>> 1. do_sys_open
>>>       may_open
>>>        inode_permission
>>>         ocfs2_permission
>>>          ocfs2_inode_lock() <=== take PR
>>>           generic_permission
>>>            get_acl
>>>             ocfs2_iop_get_acl
>>>              ocfs2_inode_lock() <=== take PR
>>> 2. fchmod|fchmodat
>>>      chmod_common
>>>       notify_change
>>>        ocfs2_setattr <=== take EX
>>>         posix_acl_chmod
>>>          get_acl
>>>           ocfs2_iop_get_acl <=== take PR
>>>          ocfs2_iop_set_acl <=== take EX
>>>
>>> Fixes them by adding the tracking logic (in the previous patch) for
>>> these funcs above, ocfs2_permission(), ocfs2_iop_[set|get]_acl(),
>>> ocfs2_setattr().
>>>
>>> Signed-off-by: Eric Ren <zren@suse.com>
>>> ---
>>>   fs/ocfs2/acl.c  | 39 ++++++++++++++++++++++++++++++++++-----
>>>   fs/ocfs2/file.c | 44 ++++++++++++++++++++++++++++++++++----------
>>>   2 files changed, 68 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
>>> index bed1fcb..c539890 100644
>>> --- a/fs/ocfs2/acl.c
>>> +++ b/fs/ocfs2/acl.c
>>> @@ -284,16 +284,31 @@ int ocfs2_iop_set_acl(struct inode *inode,
>>> struct posix_acl *acl, int type)
>>>   {
>>>       struct buffer_head *bh = NULL;
>>>       int status = 0;
>>> -
>>> -    status = ocfs2_inode_lock(inode, &bh, 1);
>>> +    int arg_flags = 0, has_locked;
>>> +    struct ocfs2_holder oh;
>>> +    struct ocfs2_lock_res *lockres;
>>> +
>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>> +    if (has_locked)
>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>       if (status < 0) {
>>>           if (status != -ENOENT)
>>>               mlog_errno(status);
>>>           return status;
>>>       }
>>> +    if (!has_locked)
>>> +        ocfs2_add_holder(lockres, &oh);
>>> +
>>>       status = ocfs2_set_acl(NULL, inode, bh, type, acl, NULL, NULL);
>>> -    ocfs2_inode_unlock(inode, 1);
>>> +
>>> +    if (!has_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>> +        ocfs2_inode_unlock(inode, 1);
>>> +    }
>>>       brelse(bh);
>>> +
>>>       return status;
>>>   }
>>>   @@ -303,21 +318,35 @@ struct posix_acl *ocfs2_iop_get_acl(struct
>>> inode *inode, int type)
>>>       struct buffer_head *di_bh = NULL;
>>>       struct posix_acl *acl;
>>>       int ret;
>>> +    int arg_flags = 0, has_locked;
>>> +    struct ocfs2_holder oh;
>>> +    struct ocfs2_lock_res *lockres;
>>>         osb = OCFS2_SB(inode->i_sb);
>>>       if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
>>>           return NULL;
>>> -    ret = ocfs2_inode_lock(inode, &di_bh, 0);
>>> +
>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>> +    if (has_locked)
>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>> +    ret = ocfs2_inode_lock_full(inode, &di_bh, 0, arg_flags);
>>>       if (ret < 0) {
>>>           if (ret != -ENOENT)
>>>               mlog_errno(ret);
>>>           return ERR_PTR(ret);
>>>       }
>>> +    if (!has_locked)
>>> +        ocfs2_add_holder(lockres, &oh);
>>>         acl = ocfs2_get_acl_nolock(inode, type, di_bh);
>>>   -    ocfs2_inode_unlock(inode, 0);
>>> +    if (!has_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>> +        ocfs2_inode_unlock(inode, 0);
>>> +    }
>>>       brelse(di_bh);
>>> +
>>>       return acl;
>>>   }
>>>   diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
>>> index c488965..62be75d 100644
>>> --- a/fs/ocfs2/file.c
>>> +++ b/fs/ocfs2/file.c
>>> @@ -1138,6 +1138,9 @@ int ocfs2_setattr(struct dentry *dentry, struct
>>> iattr *attr)
>>>       handle_t *handle = NULL;
>>>       struct dquot *transfer_to[MAXQUOTAS] = { };
>>>       int qtype;
>>> +    int arg_flags = 0, had_lock;
>>> +    struct ocfs2_holder oh;
>>> +    struct ocfs2_lock_res *lockres;
>>>         trace_ocfs2_setattr(inode, dentry,
>>>                   (unsigned long long)OCFS2_I(inode)->ip_blkno,
>>> @@ -1173,13 +1176,20 @@ int ocfs2_setattr(struct dentry *dentry,
>>> struct iattr *attr)
>>>           }
>>>       }
>>>   -    status = ocfs2_inode_lock(inode, &bh, 1);
>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>> +    had_lock = (ocfs2_is_locked_by_me(lockres) != NULL);
>> If had_lock==true, it is a bug? I think we should BUG_ON for it, that
>> can help us catch bug at the first time.
> 
> Good idea! But I'm not sure if "ocfs2_setattr" is always the first one
> who takes the cluster lock.
> It's harder for me to name all the possible paths;-/
The BUG_ON() can help catch the path where ocfs2_setattr is not the
first one.

Thanks,
Junxiao.

> 
>>
>>
>>> +    if (had_lock)
>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>       if (status < 0) {
>>>           if (status != -ENOENT)
>>>               mlog_errno(status);
>>>           goto bail_unlock_rw;
>>>       }
>>> -    inode_locked = 1;
>>> +    if (!had_lock) {
>>> +        ocfs2_add_holder(lockres, &oh);
>>> +        inode_locked = 1;
>>> +    }
>>>         if (size_change) {
>>>           status = inode_newsize_ok(inode, attr->ia_size);
>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct
>>> iattr *attr)
>>>   bail_commit:
>>>       ocfs2_commit_trans(osb, handle);
>>>   bail_unlock:
>>> -    if (status) {
>>> +    if (status && inode_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>>           ocfs2_inode_unlock(inode, 1);
>>>           inode_locked = 0;
>>>       }
>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry,
>>> struct iattr *attr)
>>>           if (status < 0)
>>>               mlog_errno(status);
>>>       }
>>> -    if (inode_locked)
>>> +    if (inode_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>>           ocfs2_inode_unlock(inode, 1);
>>> +    }
>>>         brelse(bh);
>>>       return status;
>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>   int ocfs2_permission(struct inode *inode, int mask)
>>>   {
>>>       int ret;
>>> +    int has_locked;
>>> +    struct ocfs2_holder oh;
>>> +    struct ocfs2_lock_res *lockres;
>>>         if (mask & MAY_NOT_BLOCK)
>>>           return -ECHILD;
>>>   -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>> -    if (ret) {
>>> -        if (ret != -ENOENT)
>>> -            mlog_errno(ret);
>>> -        goto out;
>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>> The same thing as ocfs2_setattr.
> OK. I will think over your suggestions!
> 
> Thanks,
> Eric
> 
>>
>> Thanks,
>> Junxiao.
>>> +    if (!has_locked) {
>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>> +        if (ret) {
>>> +            if (ret != -ENOENT)
>>> +                mlog_errno(ret);
>>> +            goto out;
>>> +        }
>>> +        ocfs2_add_holder(lockres, &oh);
>>>       }
>>>         ret = generic_permission(inode, mask);
>>>   -    ocfs2_inode_unlock(inode, 0);
>>> +    if (!has_locked) {
>>> +        ocfs2_remove_holder(lockres, &oh);
>>> +        ocfs2_inode_unlock(inode, 0);
>>> +    }
>>>   out:
>>>       return ret;
>>>   }
>>>
>>
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-16  2:46       ` Junxiao Bi
@ 2017-01-16  3:06         ` Eric Ren
  2017-01-16  3:13           ` Junxiao Bi
  0 siblings, 1 reply; 32+ messages in thread
From: Eric Ren @ 2017-01-16  3:06 UTC (permalink / raw)
  To: Junxiao Bi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

Hi Junxiao,

On 01/16/2017 10:46 AM, Junxiao Bi wrote:
>>> If had_lock==true, it is a bug? I think we should BUG_ON for it, that
>>> can help us catch bug at the first time.
>> Good idea! But I'm not sure if "ocfs2_setattr" is always the first one
>> who takes the cluster lock.
>> It's harder for me to name all the possible paths;-/
> The BUG_ON() can help catch the path where ocfs2_setattr is not the
> first one.
Yes, I understand. But, the problem is that the vfs entries calling order is out of our control.
I don't want to place an assertion where I'm not 100% sure it's absolutely right;-)

Thanks,
Eric

>
> Thanks,
> Junxiao.
>
>>>
>>>> +    if (had_lock)
>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>        if (status < 0) {
>>>>            if (status != -ENOENT)
>>>>                mlog_errno(status);
>>>>            goto bail_unlock_rw;
>>>>        }
>>>> -    inode_locked = 1;
>>>> +    if (!had_lock) {
>>>> +        ocfs2_add_holder(lockres, &oh);
>>>> +        inode_locked = 1;
>>>> +    }
>>>>          if (size_change) {
>>>>            status = inode_newsize_ok(inode, attr->ia_size);
>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct
>>>> iattr *attr)
>>>>    bail_commit:
>>>>        ocfs2_commit_trans(osb, handle);
>>>>    bail_unlock:
>>>> -    if (status) {
>>>> +    if (status && inode_locked) {
>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>            ocfs2_inode_unlock(inode, 1);
>>>>            inode_locked = 0;
>>>>        }
>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry,
>>>> struct iattr *attr)
>>>>            if (status < 0)
>>>>                mlog_errno(status);
>>>>        }
>>>> -    if (inode_locked)
>>>> +    if (inode_locked) {
>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>            ocfs2_inode_unlock(inode, 1);
>>>> +    }
>>>>          brelse(bh);
>>>>        return status;
>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>    int ocfs2_permission(struct inode *inode, int mask)
>>>>    {
>>>>        int ret;
>>>> +    int has_locked;
>>>> +    struct ocfs2_holder oh;
>>>> +    struct ocfs2_lock_res *lockres;
>>>>          if (mask & MAY_NOT_BLOCK)
>>>>            return -ECHILD;
>>>>    -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>> -    if (ret) {
>>>> -        if (ret != -ENOENT)
>>>> -            mlog_errno(ret);
>>>> -        goto out;
>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>> The same thing as ocfs2_setattr.
>> OK. I will think over your suggestions!
>>
>> Thanks,
>> Eric
>>
>>> Thanks,
>>> Junxiao.
>>>> +    if (!has_locked) {
>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>> +        if (ret) {
>>>> +            if (ret != -ENOENT)
>>>> +                mlog_errno(ret);
>>>> +            goto out;
>>>> +        }
>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>        }
>>>>          ret = generic_permission(inode, mask);
>>>>    -    ocfs2_inode_unlock(inode, 0);
>>>> +    if (!has_locked) {
>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>> +        ocfs2_inode_unlock(inode, 0);
>>>> +    }
>>>>    out:
>>>>        return ret;
>>>>    }
>>>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-16  3:06         ` Eric Ren
@ 2017-01-16  3:13           ` Junxiao Bi
  2017-01-16  3:17             ` Eric Ren
  0 siblings, 1 reply; 32+ messages in thread
From: Junxiao Bi @ 2017-01-16  3:13 UTC (permalink / raw)
  To: Eric Ren, ocfs2-devel; +Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

On 01/16/2017 11:06 AM, Eric Ren wrote:
> Hi Junxiao,
> 
> On 01/16/2017 10:46 AM, Junxiao Bi wrote:
>>>> If had_lock==true, it is a bug? I think we should BUG_ON for it, that
>>>> can help us catch bug at the first time.
>>> Good idea! But I'm not sure if "ocfs2_setattr" is always the first one
>>> who takes the cluster lock.
>>> It's harder for me to name all the possible paths;-/
>> The BUG_ON() can help catch the path where ocfs2_setattr is not the
>> first one.
> Yes, I understand. But, the problem is that the vfs entries calling
> order is out of our control.
> I don't want to place an assertion where I'm not 100% sure it's
> absolutely right;-)
If it is not the first one, is it another recursive locking bug? In this
case, if you don't like BUG_ON(), you can dump the call trace and print
some warning message.

Thanks,
Junxiao.
> 
> Thanks,
> Eric
> 
>>
>> Thanks,
>> Junxiao.
>>
>>>>
>>>>> +    if (had_lock)
>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>        if (status < 0) {
>>>>>            if (status != -ENOENT)
>>>>>                mlog_errno(status);
>>>>>            goto bail_unlock_rw;
>>>>>        }
>>>>> -    inode_locked = 1;
>>>>> +    if (!had_lock) {
>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>> +        inode_locked = 1;
>>>>> +    }
>>>>>          if (size_change) {
>>>>>            status = inode_newsize_ok(inode, attr->ia_size);
>>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct
>>>>> iattr *attr)
>>>>>    bail_commit:
>>>>>        ocfs2_commit_trans(osb, handle);
>>>>>    bail_unlock:
>>>>> -    if (status) {
>>>>> +    if (status && inode_locked) {
>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>            ocfs2_inode_unlock(inode, 1);
>>>>>            inode_locked = 0;
>>>>>        }
>>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry,
>>>>> struct iattr *attr)
>>>>>            if (status < 0)
>>>>>                mlog_errno(status);
>>>>>        }
>>>>> -    if (inode_locked)
>>>>> +    if (inode_locked) {
>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>            ocfs2_inode_unlock(inode, 1);
>>>>> +    }
>>>>>          brelse(bh);
>>>>>        return status;
>>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>>    int ocfs2_permission(struct inode *inode, int mask)
>>>>>    {
>>>>>        int ret;
>>>>> +    int has_locked;
>>>>> +    struct ocfs2_holder oh;
>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>          if (mask & MAY_NOT_BLOCK)
>>>>>            return -ECHILD;
>>>>>    -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>> -    if (ret) {
>>>>> -        if (ret != -ENOENT)
>>>>> -            mlog_errno(ret);
>>>>> -        goto out;
>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>> The same thing as ocfs2_setattr.
>>> OK. I will think over your suggestions!
>>>
>>> Thanks,
>>> Eric
>>>
>>>> Thanks,
>>>> Junxiao.
>>>>> +    if (!has_locked) {
>>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>> +        if (ret) {
>>>>> +            if (ret != -ENOENT)
>>>>> +                mlog_errno(ret);
>>>>> +            goto out;
>>>>> +        }
>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>        }
>>>>>          ret = generic_permission(inode, mask);
>>>>>    -    ocfs2_inode_unlock(inode, 0);
>>>>> +    if (!has_locked) {
>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>> +    }
>>>>>    out:
>>>>>        return ret;
>>>>>    }
>>>>>
>>
> 

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points
  2017-01-16  3:13           ` Junxiao Bi
@ 2017-01-16  3:17             ` Eric Ren
  0 siblings, 0 replies; 32+ messages in thread
From: Eric Ren @ 2017-01-16  3:17 UTC (permalink / raw)
  To: Junxiao Bi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

On 01/16/2017 11:13 AM, Junxiao Bi wrote:
> On 01/16/2017 11:06 AM, Eric Ren wrote:
>> Hi Junxiao,
>>
>> On 01/16/2017 10:46 AM, Junxiao Bi wrote:
>>>>> If had_lock==true, it is a bug? I think we should BUG_ON for it, that
>>>>> can help us catch bug at the first time.
>>>> Good idea! But I'm not sure if "ocfs2_setattr" is always the first one
>>>> who takes the cluster lock.
>>>> It's harder for me to name all the possible paths;-/
>>> The BUG_ON() can help catch the path where ocfs2_setattr is not the
>>> first one.
>> Yes, I understand. But, the problem is that the vfs entries calling
>> order is out of our control.
>> I don't want to place an assertion where I'm not 100% sure it's
>> absolutely right;-)
> If it is not the first one, is it another recursive locking bug? In this
> case, if you don't like BUG_ON(), you can dump the call trace and print
> some warning message.

Yes! I like this idea, will add it in next version, thanks!

Eric

>
> Thanks,
> Junxiao.
>> Thanks,
>> Eric
>>
>>> Thanks,
>>> Junxiao.
>>>
>>>>>> +    if (had_lock)
>>>>>> +        arg_flags = OCFS2_META_LOCK_GETBH;
>>>>>> +    status = ocfs2_inode_lock_full(inode, &bh, 1, arg_flags);
>>>>>>         if (status < 0) {
>>>>>>             if (status != -ENOENT)
>>>>>>                 mlog_errno(status);
>>>>>>             goto bail_unlock_rw;
>>>>>>         }
>>>>>> -    inode_locked = 1;
>>>>>> +    if (!had_lock) {
>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>> +        inode_locked = 1;
>>>>>> +    }
>>>>>>           if (size_change) {
>>>>>>             status = inode_newsize_ok(inode, attr->ia_size);
>>>>>> @@ -1260,7 +1270,8 @@ int ocfs2_setattr(struct dentry *dentry, struct
>>>>>> iattr *attr)
>>>>>>     bail_commit:
>>>>>>         ocfs2_commit_trans(osb, handle);
>>>>>>     bail_unlock:
>>>>>> -    if (status) {
>>>>>> +    if (status && inode_locked) {
>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>             ocfs2_inode_unlock(inode, 1);
>>>>>>             inode_locked = 0;
>>>>>>         }
>>>>>> @@ -1278,8 +1289,10 @@ int ocfs2_setattr(struct dentry *dentry,
>>>>>> struct iattr *attr)
>>>>>>             if (status < 0)
>>>>>>                 mlog_errno(status);
>>>>>>         }
>>>>>> -    if (inode_locked)
>>>>>> +    if (inode_locked) {
>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>>             ocfs2_inode_unlock(inode, 1);
>>>>>> +    }
>>>>>>           brelse(bh);
>>>>>>         return status;
>>>>>> @@ -1321,20 +1334,31 @@ int ocfs2_getattr(struct vfsmount *mnt,
>>>>>>     int ocfs2_permission(struct inode *inode, int mask)
>>>>>>     {
>>>>>>         int ret;
>>>>>> +    int has_locked;
>>>>>> +    struct ocfs2_holder oh;
>>>>>> +    struct ocfs2_lock_res *lockres;
>>>>>>           if (mask & MAY_NOT_BLOCK)
>>>>>>             return -ECHILD;
>>>>>>     -    ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>> -    if (ret) {
>>>>>> -        if (ret != -ENOENT)
>>>>>> -            mlog_errno(ret);
>>>>>> -        goto out;
>>>>>> +    lockres = &OCFS2_I(inode)->ip_inode_lockres;
>>>>>> +    has_locked = (ocfs2_is_locked_by_me(lockres) != NULL);
>>>>> The same thing as ocfs2_setattr.
>>>> OK. I will think over your suggestions!
>>>>
>>>> Thanks,
>>>> Eric
>>>>
>>>>> Thanks,
>>>>> Junxiao.
>>>>>> +    if (!has_locked) {
>>>>>> +        ret = ocfs2_inode_lock(inode, NULL, 0);
>>>>>> +        if (ret) {
>>>>>> +            if (ret != -ENOENT)
>>>>>> +                mlog_errno(ret);
>>>>>> +            goto out;
>>>>>> +        }
>>>>>> +        ocfs2_add_holder(lockres, &oh);
>>>>>>         }
>>>>>>           ret = generic_permission(inode, mask);
>>>>>>     -    ocfs2_inode_unlock(inode, 0);
>>>>>> +    if (!has_locked) {
>>>>>> +        ocfs2_remove_holder(lockres, &oh);
>>>>>> +        ocfs2_inode_unlock(inode, 0);
>>>>>> +    }
>>>>>>     out:
>>>>>>         return ret;
>>>>>>     }
>>>>>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

* Re: [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
  2017-01-16  2:42       ` Junxiao Bi
@ 2017-01-16  3:31         ` Eric Ren
  0 siblings, 0 replies; 32+ messages in thread
From: Eric Ren @ 2017-01-16  3:31 UTC (permalink / raw)
  To: Junxiao Bi, ocfs2-devel
  Cc: akpm, mfasheh, jlbec, ghe, jiangqi903, linux-kernel

Hi Junxiao,
>> OK, good suggestion. Hrm, but in order to align with "ocfs2_inc_holders", I
>> think it's good to keep those function names as it is;-)
> that name is also not very clear. Maybe you can make another patch to
> clear it.

Maybe, the name completeness needs to compromise with the name length at
some time.  One of basic rules is whether the name may confuse the reader.
In this case,  "ocfs2_inc_holders"  in dlmglue.c sounds good to me, not ambiguous.

I want to go with it. Anyone who don't like the name can propose their patch for it;-)

Thanks,
Eric

>
> Thanks,
> Junxiao.
>
>
>> Thanks for your review!
>> Eric
>>
>>> Thanks,
>>> Junxiao.
>>>
>>>> +    struct list_head oh_list;
>>>> +    struct pid *oh_owner_pid;
>>>> +};
>>>> +
>>>>    /* ocfs2_inode_lock_full() 'arg_flags' flags */
>>>>    /* don't wait on recovery. */
>>>>    #define OCFS2_META_LOCK_RECOVERY    (0x01)
>>>> @@ -77,6 +82,8 @@ struct ocfs2_orphan_scan_lvb {
>>>>    #define OCFS2_META_LOCK_NOQUEUE        (0x02)
>>>>    /* don't block waiting for the downconvert thread, instead return
>>>> -EAGAIN */
>>>>    #define OCFS2_LOCK_NONBLOCK        (0x04)
>>>> +/* just get back disk inode bh if we've got cluster lock. */
>>>> +#define OCFS2_META_LOCK_GETBH        (0x08)
>>>>      /* Locking subclasses of inode cluster lock */
>>>>    enum {
>>>> @@ -170,4 +177,15 @@ void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug
>>>> *dlm_debug);
>>>>      /* To set the locking protocol on module initialization */
>>>>    void ocfs2_set_locking_protocol(void);
>>>> +
>>>> +/*
>>>> + * Keep a list of processes who have interest in a lockres.
>>>> + * Note: this is now only uesed for check recursive cluster lock.
>>>> + */
>>>> +inline void ocfs2_add_holder(struct ocfs2_lock_res *lockres,
>>>> +                 struct ocfs2_holder *oh);
>>>> +inline void ocfs2_remove_holder(struct ocfs2_lock_res *lockres,
>>>> +                 struct ocfs2_holder *oh);
>>>> +inline struct ocfs2_holder *ocfs2_is_locked_by_me(struct
>>>> ocfs2_lock_res *lockres);
>>>> +
>>>>    #endif    /* DLMGLUE_H */
>>>> diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
>>>> index 7e5958b..0c39d71 100644
>>>> --- a/fs/ocfs2/ocfs2.h
>>>> +++ b/fs/ocfs2/ocfs2.h
>>>> @@ -172,6 +172,7 @@ struct ocfs2_lock_res {
>>>>          struct list_head         l_blocked_list;
>>>>        struct list_head         l_mask_waiters;
>>>> +    struct list_head     l_holders;
>>>>          unsigned long         l_flags;
>>>>        char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
>>>>
>

^ permalink raw reply	[flat|nested] 32+ messages in thread

end of thread, other threads:[~2017-01-16  3:34 UTC | newest]

Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-05 15:31 [PATCH 0/2] fix deadlock caused by recursive cluster locking Eric Ren
2017-01-05 15:31 ` [PATCH 1/2] ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock Eric Ren
2017-01-06  6:07   ` Joseph Qi
2017-01-06  7:03     ` Eric Ren
2017-01-06  7:24       ` Joseph Qi
2017-01-06  8:04         ` Eric Ren
2017-01-13  3:59   ` Junxiao Bi
2017-01-13  6:12     ` Eric Ren
2017-01-16  2:42       ` Junxiao Bi
2017-01-16  3:31         ` Eric Ren
2017-01-05 15:31 ` [PATCH 2/2] ocfs2: fix deadlocks when taking inode lock at vfs entry points Eric Ren
2017-01-06  6:09   ` Joseph Qi
2017-01-06  6:56     ` Eric Ren
2017-01-06  7:14       ` Joseph Qi
2017-01-06  8:21         ` Eric Ren
2017-01-06  9:03           ` Joseph Qi
2017-01-06  9:13             ` Eric Ren
2017-01-06  9:55               ` Joseph Qi
2017-01-06 11:56                 ` Eric Ren
2017-01-09  1:13                   ` Joseph Qi
2017-01-09  2:13                     ` Eric Ren
2017-01-12 11:24                       ` [Ocfs2-devel] " Eric Ren
2017-01-12 11:36                         ` Joseph Qi
2017-01-06 14:52   ` kbuild test robot
2017-01-09  5:24     ` Eric Ren
2017-01-06 17:53   ` kbuild test robot
2017-01-13  4:22   ` Junxiao Bi
2017-01-13  6:19     ` Eric Ren
2017-01-16  2:46       ` Junxiao Bi
2017-01-16  3:06         ` Eric Ren
2017-01-16  3:13           ` Junxiao Bi
2017-01-16  3:17             ` Eric Ren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).