linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: <lee.jones@linaro.org>
Cc: <patches@opensource.wolfsonmicro.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 3/4] mfd: arizona: Update arizona_poll_reg to take a timeout in milliseconds
Date: Fri, 6 Jan 2017 14:22:41 +0000	[thread overview]
Message-ID: <1483712562-7361-3-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1483712562-7361-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

Currently, we specify the timeout in terms of the number of polls but it
is more clear from a user of the functions perspective to specify the
timeout directly in milliseconds, as such update the function to these new
semantics.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Changes since v1:
 - Fixed small typo of missing * 1000

Thanks,
Charles

 drivers/mfd/arizona-core.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 4cb34c3..ae4cdc4 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -235,14 +235,18 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+#define ARIZONA_REG_POLL_DELAY_MS 5
+
 static int arizona_poll_reg(struct arizona *arizona,
-			    int timeout, unsigned int reg,
+			    int timeout_ms, unsigned int reg,
 			    unsigned int mask, unsigned int target)
 {
+	unsigned int npolls = (timeout_ms + ARIZONA_REG_POLL_DELAY_MS - 1) /
+			      ARIZONA_REG_POLL_DELAY_MS;
 	unsigned int val = 0;
 	int ret, i;
 
-	for (i = 0; i < timeout; i++) {
+	for (i = 0; i < npolls; i++) {
 		ret = regmap_read(arizona->regmap, reg, &val);
 		if (ret != 0) {
 			dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
@@ -253,7 +257,8 @@ static int arizona_poll_reg(struct arizona *arizona,
 		if ((val & mask) == target)
 			return 0;
 
-		usleep_range(1000, 5000);
+		usleep_range((ARIZONA_REG_POLL_DELAY_MS * 1000) / 2,
+			     ARIZONA_REG_POLL_DELAY_MS * 1000);
 	}
 
 	dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
@@ -269,7 +274,7 @@ static int arizona_wait_for_boot(struct arizona *arizona)
 	 * we won't race with the interrupt handler as it'll be blocked on
 	 * runtime resume.
 	 */
-	ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
+	ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
 
 	if (!ret)
@@ -339,7 +344,7 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
 			ret);
 		return ret;
 	}
-	ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
+	ret = arizona_poll_reg(arizona, 125, ARIZONA_INTERRUPT_RAW_STATUS_5,
 			       ARIZONA_FLL1_CLOCK_OK_STS,
 			       ARIZONA_FLL1_CLOCK_OK_STS);
 	if (ret)
@@ -403,7 +408,7 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
 		goto err;
 	}
 
-	ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
+	ret = arizona_poll_reg(arizona, 25, ARIZONA_WRITE_SEQUENCER_CTRL_1,
 			       ARIZONA_WSEQ_BUSY, 0);
 	if (ret)
 		regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
-- 
2.1.4

  parent reply	other threads:[~2017-01-06 14:22 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-06 14:22 [PATCH 1/4] mfd: arizona: Remove duplicate set of ret variable Charles Keepax
2017-01-06 14:22 ` [PATCH 2/4] mfd: arizona: Display register addresses in hex Charles Keepax
2017-01-06 14:22 ` Charles Keepax [this message]
2017-01-06 14:22 ` [PATCH v2 4/4] mfd: arizona: Use regmap_read_poll_timeout instead of hard coding it Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1483712562-7361-3-git-send-email-ckeepax@opensource.wolfsonmicro.com \
    --to=ckeepax@opensource.wolfsonmicro.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).