From: Chris Lapa <chris@lapa.com.au>
To: pali.rohar@gmail.com, afd@ti.com, sre@kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Chris Lapa <chris@lapa.com.au>
Subject: [PATCH v5 06/11] power: supply: bq27xxx: adds specific support for bq27510-g3 revision.
Date: Wed, 11 Jan 2017 12:44:43 +1100 [thread overview]
Message-ID: <1484099088-452-7-git-send-email-chris@cpdesign.com.au> (raw)
In-Reply-To: <1484099088-452-1-git-send-email-chris@cpdesign.com.au>
From: Chris Lapa <chris@lapa.com.au>
This commit adds the BQ27510G3 chip definition to specifically match the
bq27510-G3 functionality as described in the datasheet.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Tested-by: Chris Lapa <chris@lapa.com.au>
---
drivers/power/supply/bq27xxx_battery.c | 39 ++++++++++++++++++++++++++++++
drivers/power/supply/bq27xxx_battery_i2c.c | 2 ++
include/linux/power/bq27xxx_battery.h | 1 +
3 files changed, 42 insertions(+)
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index d378f56..562055d 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -242,6 +242,25 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
[BQ27XXX_REG_DCAP] = 0x3c,
[BQ27XXX_REG_AP] = 0x24,
},
+ [BQ27510G3] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x28,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = 0x1a,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x1e,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x20,
+ [BQ27XXX_REG_DCAP] = 0x2e,
+ [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+ },
[BQ27530] = {
[BQ27XXX_REG_CTRL] = 0x00,
[BQ27XXX_REG_TEMP] = 0x06,
@@ -461,6 +480,24 @@ static enum power_supply_property bq27510g2_battery_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
};
+static enum power_supply_property bq27510g3_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
static enum power_supply_property bq27530_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
@@ -548,6 +585,7 @@ static struct {
BQ27XXX_PROP(BQ27500, bq27500_battery_props),
BQ27XXX_PROP(BQ27510G1, bq27510g1_battery_props),
BQ27XXX_PROP(BQ27510G2, bq27510g2_battery_props),
+ BQ27XXX_PROP(BQ27510G3, bq27510g3_battery_props),
BQ27XXX_PROP(BQ27530, bq27530_battery_props),
BQ27XXX_PROP(BQ27541, bq27541_battery_props),
BQ27XXX_PROP(BQ27545, bq27545_battery_props),
@@ -805,6 +843,7 @@ static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags)
case BQ27500:
case BQ27510G1:
case BQ27510G2:
+ case BQ27510G3:
case BQ27541:
case BQ27545:
return flags & (BQ27XXX_FLAG_OTC | BQ27XXX_FLAG_OTD);
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index 1a7919d..289592a 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -154,6 +154,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
{ "bq27500-1", BQ27500 },
{ "bq27510g1", BQ27510G1 },
{ "bq27510g2", BQ27510G2 },
+ { "bq27510g3", BQ27510G3 },
{ "bq27530", BQ27530 },
{ "bq27531", BQ27530 },
{ "bq27541", BQ27541 },
@@ -179,6 +180,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
{ .compatible = "ti,bq27500-1" },
{ .compatible = "ti,bq27510g1" },
{ .compatible = "ti,bq27510g2" },
+ { .compatible = "ti,bq27510g3" },
{ .compatible = "ti,bq27530" },
{ .compatible = "ti,bq27531" },
{ .compatible = "ti,bq27541" },
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 79772ca..c45ce71 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -9,6 +9,7 @@ enum bq27xxx_chip {
BQ27500, /* bq27500/1 */
BQ27510G1, /* bq27510G1 */
BQ27510G2, /* bq27510G2 */
+ BQ27510G3, /* bq27510G3 */
BQ27530, /* bq27530, bq27531 */
BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
BQ27545, /* bq27545 */
--
2.1.4
next prev parent reply other threads:[~2017-01-11 1:45 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-22 1:22 [PATCH 00/10] power: supply: bq275xx: implement individual chip revision support Chris Lapa
2016-12-22 1:22 ` [PATCH 01/10] power: supplies: bq275xx: rename BQ27500 allow for deprecation in future Chris Lapa
2016-12-22 1:22 ` [PATCH 02/10] power: supplies: bq275xx: adds specific support for bq27500/1 revision Chris Lapa
2016-12-22 1:22 ` [PATCH 03/10] power: supplies: bq275xx: adds specific support for bq27510-g1 revision Chris Lapa
2016-12-22 1:22 ` [PATCH 04/10] power: supplies: bq275xx: adds specific support for bq27510-g2 revision Chris Lapa
2016-12-22 1:22 ` [PATCH 05/10] power: supplies: bq275xx: adds specific support for bq27510-g3 revision Chris Lapa
2016-12-22 1:22 ` [PATCH 06/10] power: supplies: bq275xx: adds specific support for bq27520-g1 revision Chris Lapa
2016-12-22 1:22 ` [PATCH 07/10] power: supplies: bq275xx: adds specific support for bq27520-g2 revision Chris Lapa
2016-12-22 1:22 ` [PATCH 08/10] power: supplies: bq275xx: adds specific support for bq27520-g3 revision Chris Lapa
2016-12-22 1:22 ` [PATCH 09/10] power: supplies: bq275xx: adds specific support for bq27520-g4 revision Chris Lapa
2016-12-22 8:57 ` Pali Rohár
2016-12-23 0:04 ` [PATCH v2 00/11] power: supply: bq275xx: implement individual chip revision support Chris Lapa
2016-12-23 0:04 ` [PATCH v2 01/11] power: supplies: bq275xx: rename BQ27500 allow for deprecation in future Chris Lapa
2017-01-05 23:59 ` Sebastian Reichel
2017-01-06 0:29 ` Chris Lapa
2017-01-06 17:36 ` Sebastian Reichel
2016-12-23 0:04 ` [PATCH v2 02/11] power: supplies: bq275xx: adds specific support for bq27500/1 revision Chris Lapa
2016-12-23 0:04 ` [PATCH v2 03/11] power: supplies: bq275xx: adds specific support for bq27510-g1 revision Chris Lapa
2016-12-23 0:05 ` [PATCH v2 04/11] power: supplies: bq275xx: adds specific support for bq27510-g2 revision Chris Lapa
2016-12-23 0:05 ` [PATCH v2 05/11] power: supplies: bq275xx: adds specific support for bq27510-g3 revision Chris Lapa
2016-12-23 0:05 ` [PATCH v2 06/11] power: supplies: bq275xx: adds specific support for bq27520-g1 revision Chris Lapa
2016-12-23 0:05 ` [PATCH v2 07/11] power: supplies: bq275xx: adds specific support for bq27520-g2 revision Chris Lapa
2016-12-23 0:05 ` [PATCH v2 08/11] power: supplies: bq275xx: adds specific support for bq27520-g3 revision Chris Lapa
2016-12-23 0:05 ` [PATCH v2 09/11] power: supplies: bq275xx: adds specific support for bq27520-g4 revision Chris Lapa
2016-12-23 0:05 ` [PATCH v2 10/11] power: supply: bq275xx: cleanup over temperature flag check Chris Lapa
2016-12-23 0:05 ` [PATCH v2 11/11] power: supplies: bq275xx: adds device tree binding documentation Chris Lapa
2017-01-06 0:06 ` Sebastian Reichel
2017-01-06 0:32 ` Chris Lapa
2017-01-09 0:47 ` [PATCH v3 00/11] power: supply: bq275xx: implement individual chip revision support Chris Lapa
2017-01-09 0:47 ` [PATCH v3 01/11] power: supplies: bq275xx: move overtemp tests to a switch statement Chris Lapa
2017-01-09 15:35 ` Andrew F. Davis
2017-01-09 0:47 ` [PATCH v3 02/11] power: supplies: bq275xx: rename BQ27500 allow for deprecation in future Chris Lapa
2017-01-09 0:47 ` [PATCH v3 03/11] power: supplies: bq275xx: adds specific support for bq27500/1 revision Chris Lapa
2017-01-09 0:47 ` [PATCH v3 04/11] power: supplies: bq275xx: adds specific support for bq27510-g1 revision Chris Lapa
2017-01-09 0:47 ` [PATCH v3 05/11] power: supplies: bq275xx: adds specific support for bq27510-g2 revision Chris Lapa
2017-01-09 0:47 ` [PATCH v3 06/11] power: supplies: bq275xx: adds specific support for bq27510-g3 revision Chris Lapa
2017-01-09 0:47 ` [PATCH v3 07/11] power: supplies: bq275xx: adds specific support for bq27520-g1 revision Chris Lapa
2017-01-09 0:47 ` [PATCH v3 08/11] power: supplies: bq275xx: adds specific support for bq27520-g2 revision Chris Lapa
2017-01-09 0:47 ` [PATCH v3 09/11] power: supplies: bq275xx: adds specific support for bq27520-g3 revision Chris Lapa
2017-01-09 0:47 ` [PATCH v3 10/11] power: supplies: bq275xx: adds specific support for bq27520-g4 revision Chris Lapa
2017-01-09 0:47 ` [PATCH v3 11/11] power: supplies: bq27xxx: adds device tree binding documentation Chris Lapa
2017-01-09 8:23 ` [PATCH v3 00/11] power: supply: bq275xx: implement individual chip revision support Pali Rohár
2017-01-10 2:49 ` Sebastian Reichel
2017-01-10 5:25 ` [PATCH v4 00/10] power: supply: bq27xxx: " Chris Lapa
2017-01-10 5:25 ` [PATCH v4 01/10] power: supplies: bq27xxx: rename BQ27500 allow for deprecation in future Chris Lapa
2017-01-10 8:58 ` Pali Rohár
2017-01-10 22:25 ` Chris Lapa
2017-01-10 23:29 ` Sebastian Reichel
2017-01-10 5:25 ` [PATCH v4 02/10] power: supplies: bq27xxx: adds specific support for bq27500/1 revision Chris Lapa
2017-01-10 5:25 ` [PATCH v4 03/10] power: supplies: bq27xxx: adds specific support for bq27510-g1 revision Chris Lapa
2017-01-10 5:25 ` [PATCH v4 04/10] power: supplies: bq27xxx: adds specific support for bq27510-g2 revision Chris Lapa
2017-01-10 5:25 ` [PATCH v4 05/10] power: supplies: bq27xxx: adds specific support for bq27510-g3 revision Chris Lapa
2017-01-10 5:25 ` [PATCH v4 06/10] power: supplies: bq27xxx: adds specific support for bq27520-g1 revision Chris Lapa
2017-01-10 5:25 ` [PATCH v4 07/10] power: supplies: bq27xxx: adds specific support for bq27520-g2 revision Chris Lapa
2017-01-10 5:25 ` [PATCH v4 08/10] power: supplies: bq27xxx: adds specific support for bq27520-g3 revision Chris Lapa
2017-01-10 5:25 ` [PATCH v4 09/10] power: supplies: bq27xxx: adds specific support for bq27520-g4 revision Chris Lapa
2017-01-10 5:25 ` [PATCH v4 10/10] power: supplies: bq27xxx: adds device tree binding documentation Chris Lapa
2017-01-11 1:44 ` [PATCH v5 00/11] power: supply: bq27xxx: implement individual chip revision support Chris Lapa
2017-01-11 1:44 ` [PATCH v5 01/11] power: supply: bq27xxx: rename BQ27500 allow for deprecation in future Chris Lapa
2017-01-11 1:44 ` [PATCH v5 02/11] power: supply: bq27xxx: rename BQ27510 " Chris Lapa
2017-01-11 1:44 ` [PATCH v5 03/11] power: supply: bq27xxx: adds specific support for bq27500/1 revision Chris Lapa
2017-01-11 1:44 ` [PATCH v5 04/11] power: supply: bq27xxx: adds specific support for bq27510-g1 revision Chris Lapa
2017-01-11 1:44 ` [PATCH v5 05/11] power: supply: bq27xxx: adds specific support for bq27510-g2 revision Chris Lapa
2017-01-11 1:44 ` Chris Lapa [this message]
2017-01-11 1:44 ` [PATCH v5 07/11] power: supply: bq27xxx: adds specific support for bq27520-g1 revision Chris Lapa
2017-01-11 1:44 ` [PATCH v5 08/11] power: supply: bq27xxx: adds specific support for bq27520-g2 revision Chris Lapa
2017-01-11 1:44 ` [PATCH v5 09/11] power: supply: bq27xxx: adds specific support for bq27520-g3 revision Chris Lapa
2017-01-11 1:44 ` [PATCH v5 10/11] power: supply: bq27xxx: adds specific support for bq27520-g4 revision Chris Lapa
2017-01-11 1:44 ` [PATCH v5 11/11] power: supply: bq27xxx: adds device tree binding documentation Chris Lapa
2017-01-12 2:54 ` [PATCH v5 00/11] power: supply: bq27xxx: implement individual chip revision support Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484099088-452-7-git-send-email-chris@cpdesign.com.au \
--to=chris@lapa.com.au \
--cc=afd@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).