From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752852AbdATSqy (ORCPT ); Fri, 20 Jan 2017 13:46:54 -0500 Received: from mail-wm0-f66.google.com ([74.125.82.66]:35948 "EHLO mail-wm0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752075AbdATSqw (ORCPT ); Fri, 20 Jan 2017 13:46:52 -0500 From: =?UTF-8?q?Luk=C3=A1=C5=A1=20Lalinsk=C3=BD?= To: Greg Kroah-Hartman , linux-kernel@vger.kernel.org Cc: =?UTF-8?q?Luk=C3=A1=C5=A1=20Lalinsk=C3=BD?= Subject: [PATCH] USB: Add quirk for WORLDE easykey.25 MIDI keyboard Date: Fri, 20 Jan 2017 19:46:34 +0100 Message-Id: <1484937994-8076-1-git-send-email-lukas@oxygene.sk> X-Mailer: git-send-email 2.7.4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218, idProduct=0401). The device reports that it has config string descriptor at index 3, but when the system selects the configuration and tries to get the description, it returns a -EPROTO error, the communication restarts and this keeps repeating over and over again. Not requesting the string descriptor makes the device work correctly. Relevant info from Wireshark: [...] CONFIGURATION DESCRIPTOR bLength: 9 bDescriptorType: 0x02 (CONFIGURATION) wTotalLength: 101 bNumInterfaces: 2 bConfigurationValue: 1 iConfiguration: 3 Configuration bmAttributes: 0xc0 SELF-POWERED NO REMOTE-WAKEUP 1... .... = Must be 1: Must be 1 for USB 1.1 and higher .1.. .... = Self-Powered: This device is SELF-POWERED ..0. .... = Remote Wakeup: This device does NOT support remote wakeup bMaxPower: 50 (100mA) [...] 45 0.369104 host 2.38.0 USB 64 GET DESCRIPTOR Request STRING [...] URB setup bmRequestType: 0x80 1... .... = Direction: Device-to-host .00. .... = Type: Standard (0x00) ...0 0000 = Recipient: Device (0x00) bRequest: GET DESCRIPTOR (6) Descriptor Index: 0x03 bDescriptorType: 0x03 Language Id: English (United States) (0x0409) wLength: 255 46 0.369255 2.38.0 host USB 64 GET DESCRIPTOR Response STRING[Malformed Packet] [...] Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0 USB URB [Source: 2.38.0] [Destination: host] URB id: 0xffff88021f62d480 URB type: URB_COMPLETE ('C') URB transfer type: URB_CONTROL (0x02) Endpoint: 0x80, Direction: IN Device: 38 URB bus id: 2 Device setup request: not relevant ('-') Data: present (0) URB sec: 1484896277 URB usec: 455031 URB status: Protocol error (-EPROTO) (-71) URB length [bytes]: 0 Data length [bytes]: 0 [Request in: 45] [Time from request: 0.000151000 seconds] Unused Setup Header Interval: 0 Start frame: 0 Copy of Transfer Flags: 0x00000200 Number of ISO descriptors: 0 [Malformed Packet: USB] [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)] [Malformed Packet (Exception occurred)] [Severity level: Error] [Group: Malformed] Signed-off-by: Lukáš Lalinský --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index d2e50a2..24f9f98 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -37,6 +37,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + /* WORLDE easy key (easykey.25) MIDI controller */ + { USB_DEVICE(0x0218, 0x0401), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, -- 2.7.4