From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751353AbdAaRHM convert rfc822-to-8bit (ORCPT ); Tue, 31 Jan 2017 12:07:12 -0500 Received: from metis.ext.4.pengutronix.de ([92.198.50.35]:34987 "EHLO metis.ext.4.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750869AbdAaRGu (ORCPT ); Tue, 31 Jan 2017 12:06:50 -0500 Message-ID: <1485881287.2932.73.camel@pengutronix.de> Subject: Re: [PATCH v3 17/24] media: imx: Add CSI subdev driver From: Philipp Zabel To: Steve Longerbeam Cc: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com, linux@armlinux.org.uk, mchehab@kernel.org, hverkuil@xs4all.nl, nick@shmanahar.org, markus.heiser@darmarIT.de, laurent.pinchart+renesas@ideasonboard.com, bparrot@ti.com, geert@linux-m68k.org, arnd@arndb.de, sudipm.mukherjee@gmail.com, minghsiu.tsai@mediatek.com, tiffany.lin@mediatek.com, jean-christophe.trotin@st.com, horms+renesas@verge.net.au, niklas.soderlund+renesas@ragnatech.se, robert.jarzmik@free.fr, songjun.wu@microchip.com, andrew-ct.chen@mediatek.com, gregkh@linuxfoundation.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org, devel@driverdev.osuosl.org, Steve Longerbeam Date: Tue, 31 Jan 2017 17:48:07 +0100 In-Reply-To: <1485877882.2932.70.camel@pengutronix.de> References: <1483755102-24785-1-git-send-email-steve_longerbeam@mentor.com> <1483755102-24785-18-git-send-email-steve_longerbeam@mentor.com> <1485877882.2932.70.camel@pengutronix.de> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8BIT X-Mailer: Evolution 3.12.9-1+b1 Mime-Version: 1.0 X-SA-Exim-Connect-IP: 2001:67c:670:100:3ad5:47ff:feaf:1a17 X-SA-Exim-Mail-From: p.zabel@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, 2017-01-31 at 16:51 +0100, Philipp Zabel wrote: > On Fri, 2017-01-06 at 18:11 -0800, Steve Longerbeam wrote: > [...] > > +static int csi_set_fmt(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *sdformat) > > +{ > > + struct csi_priv *priv = v4l2_get_subdevdata(sd); > > + struct v4l2_mbus_framefmt *infmt, *outfmt; > > + struct v4l2_rect crop; > > + int ret; > > + > > + if (sdformat->pad >= CSI_NUM_PADS) > > + return -EINVAL; > > + > > + if (priv->stream_on) > > + return -EBUSY; > > + > > + infmt = &priv->format_mbus[priv->input_pad]; > > + outfmt = &priv->format_mbus[priv->output_pad]; > > + > > + if (sdformat->pad == priv->output_pad) { > > + sdformat->format.code = infmt->code; > > + sdformat->format.field = infmt->field; > > + crop.left = priv->crop.left; > > + crop.top = priv->crop.top; > > + crop.width = sdformat->format.width; > > + crop.height = sdformat->format.height; > > + ret = csi_try_crop(priv, &crop); > > This is the wrong way around, see also below. > > Here the the output sdformat->format.width/height should be set to the > priv->crop.width/height (or priv->crop.width/height / 2, to enable > downscaling). The crop rectangle should not be changed by an output pad > set_fmt. [...] > The crop rectangle instead should be reset to the full input frame when > the input pad format is set. How about this: ----------8<---------- diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c index 5e80a0871b139..8220e4204a125 100644 --- a/drivers/staging/media/imx/imx-media-csi.c +++ b/drivers/staging/media/imx/imx-media-csi.c @@ -484,6 +484,8 @@ static int csi_setup(struct csi_priv *priv) if_fmt.field = outfmt->field; ipu_csi_set_window(priv->csi, &priv->crop); + ipu_csi_set_downsize(priv->csi, priv->crop.width == 2 * outfmt->width, + priv->crop.height == 2 * outfmt->height); ipu_csi_init_interface(priv->csi, &sensor_mbus_cfg, &if_fmt); @@ -830,15 +832,14 @@ static int csi_set_fmt(struct v4l2_subdev *sd, switch (sdformat->pad) { case CSI_SRC_PAD_DIRECT: case CSI_SRC_PAD_IDMAC: - crop.left = priv->crop.left; - crop.top = priv->crop.top; - crop.width = sdformat->format.width; - crop.height = sdformat->format.height; - ret = csi_try_crop(priv, &crop, sensor); - if (ret) - return ret; - sdformat->format.width = crop.width; - sdformat->format.height = crop.height; + if (sdformat->format.width < priv->crop.width * 3 / 4) + sdformat->format.width = priv->crop.width / 2; + else + sdformat->format.width = priv->crop.width; + if (sdformat->format.height < priv->crop.height * 3 / 4) + sdformat->format.height = priv->crop.height / 2; + else + sdformat->format.height = priv->crop.height; if (sdformat->pad == CSI_SRC_PAD_IDMAC) { cc = imx_media_find_format(0, sdformat->format.code, @@ -887,6 +888,14 @@ static int csi_set_fmt(struct v4l2_subdev *sd, } break; case CSI_SINK_PAD: + crop.left = 0; + crop.top = 0; + crop.width = sdformat->format.width; + crop.height = sdformat->format.height; + ret = csi_try_crop(priv, &crop, sensor); + if (ret) + return ret; + cc = imx_media_find_format(0, sdformat->format.code, true, false); if (!cc) { @@ -904,9 +913,8 @@ static int csi_set_fmt(struct v4l2_subdev *sd, } else { priv->format_mbus[sdformat->pad] = sdformat->format; priv->cc[sdformat->pad] = cc; - /* Update the crop window if this is an output pad */ - if (sdformat->pad == CSI_SRC_PAD_DIRECT || - sdformat->pad == CSI_SRC_PAD_IDMAC) + /* Reset the crop window if this is the input pad */ + if (sdformat->pad == CSI_SINK_PAD) priv->crop = crop; } ---------->8---------- regards Philipp