[PATCH v2] Input: pwm-beeper: support customized freq for SND_BELL

[PATCH v2] Input: pwm-beeper: support customized freq for SND_BELL

[Heiko Schocher]

From: Guan Ben <ben.guan@cn.bosch.com>

extend the pwm-beeper driver to support customized frequency
for SND_BELL from device tree.

Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
[hs@denx.de: adapted to 4.10-rc7]
Signed-off-by: Heiko Schocher <hs@denx.de>

---

Changes in v2:
- add comment from Rob Herring:
  rename property name "bell-frequency" to "beeper-hz"
- add comment from Dmitry Torokhov:
  use device_property_read_u32() instead of of_property_read_u32()
- rebased against c470abd4fde40ea6a0846a2beab642a578c0b8cd
  Linux 4.10

 .../devicetree/bindings/input/pwm-beeper.txt       |  3 ++
 drivers/input/misc/pwm-beeper.c                    | 36 ++++++++++++++++------
 2 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
index be332ae..4e4e128 100644
--- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -5,3 +5,6 @@ Registers a PWM device as beeper.
 Required properties:
 - compatible: should be "pwm-beeper"
 - pwms: phandle to the physical PWM device
+
+optional properties:
+- beeper-hz:  bell frequency in Hz
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index 5f9655d..5ea6fda 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -27,6 +27,7 @@ struct pwm_beeper {
 	struct pwm_device *pwm;
 	struct work_struct work;
 	unsigned long period;
+	unsigned int bell_frequency;
 };
 
 #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
@@ -58,20 +59,17 @@ static int pwm_beeper_event(struct input_dev *input,
 	if (type != EV_SND || value < 0)
 		return -EINVAL;
 
-	switch (code) {
-	case SND_BELL:
-		value = value ? 1000 : 0;
-		break;
-	case SND_TONE:
-		break;
-	default:
+	if (code != SND_BELL && code != SND_TONE)
 		return -EINVAL;
-	}
 
 	if (value == 0)
 		beeper->period = 0;
-	else
+	else {
+		if (code == SND_BELL)
+			value = beeper->bell_frequency;
+
 		beeper->period = HZ_TO_NANOSECONDS(value);
+	}
 
 	schedule_work(&beeper->work);
 
@@ -93,6 +91,25 @@ static void pwm_beeper_close(struct input_dev *input)
 	pwm_beeper_stop(beeper);
 }
 
+static void pwm_beeper_init_bell_frequency(struct device *dev,
+					   struct pwm_beeper *beeper)
+{
+	struct device_node *node;
+	unsigned int bell_frequency = 1000;
+	int err;
+
+	if (IS_ENABLED(CONFIG_OF)) {
+		node = dev->of_node;
+		err = device_property_read_u32(dev, "beeper-hz",
+					       &bell_frequency);
+		if (err < 0)
+			dev_dbg(dev, "Failed to read beeper-hz, using default: %u Hz\n",
+				bell_frequency);
+	}
+
+	beeper->bell_frequency = bell_frequency;
+}
+
 static int pwm_beeper_probe(struct platform_device *pdev)
 {
 	unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
@@ -122,6 +139,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
 	pwm_apply_args(beeper->pwm);
 
 	INIT_WORK(&beeper->work, pwm_beeper_work);
+	pwm_beeper_init_bell_frequency(&pdev->dev, beeper);
 
 	beeper->input = input_allocate_device();
 	if (!beeper->input) {
-- 
2.7.4

Re: [v2] Input: pwm-beeper: support customized freq for SND_BELL

[David Lechner]

On 02/20/2017 02:37 AM, Heiko Schocher wrote:
> From: Guan Ben <ben.guan@cn.bosch.com>
>
> extend the pwm-beeper driver to support customized frequency
> for SND_BELL from device tree.
>
> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
> [hs@denx.de: adapted to 4.10-rc7]
> Signed-off-by: Heiko Schocher <hs@denx.de>
> ---
>
> Changes in v2:
> - add comment from Rob Herring:
>   rename property name "bell-frequency" to "beeper-hz"

Is there a separate patch for the devicetree bindings documentation?

> - add comment from Dmitry Torokhov:
>   use device_property_read_u32() instead of of_property_read_u32()
> - rebased against c470abd4fde40ea6a0846a2beab642a578c0b8cd
>   Linux 4.10
>
>  .../devicetree/bindings/input/pwm-beeper.txt       |  3 ++
>  drivers/input/misc/pwm-beeper.c                    | 36 ++++++++++++++++------
>  2 files changed, 30 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
> index be332ae..4e4e128 100644
> --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
> +++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
> @@ -5,3 +5,6 @@ Registers a PWM device as beeper.
>  Required properties:
>  - compatible: should be "pwm-beeper"
>  - pwms: phandle to the physical PWM device
> +
> +optional properties:
> +- beeper-hz:  bell frequency in Hz
> diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
> index 5f9655d..5ea6fda 100644
> --- a/drivers/input/misc/pwm-beeper.c
> +++ b/drivers/input/misc/pwm-beeper.c
> @@ -27,6 +27,7 @@ struct pwm_beeper {
>  	struct pwm_device *pwm;
>  	struct work_struct work;
>  	unsigned long period;
> +	unsigned int bell_frequency;
>  };
>
>  #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
> @@ -58,20 +59,17 @@ static int pwm_beeper_event(struct input_dev *input,
>  	if (type != EV_SND || value < 0)
>  		return -EINVAL;
>
> -	switch (code) {
> -	case SND_BELL:
> -		value = value ? 1000 : 0;

This would be much simpler if you just changed the single line above:

		value = value ? beeper->bell_frequency : 0;

> -		break;
> -	case SND_TONE:
> -		break;
> -	default:
> +	if (code != SND_BELL && code != SND_TONE)
>  		return -EINVAL;
> -	}
>
>  	if (value == 0)
>  		beeper->period = 0;
> -	else
> +	else {
> +		if (code == SND_BELL)
> +			value = beeper->bell_frequency;
> +
>  		beeper->period = HZ_TO_NANOSECONDS(value);
> +	}
>
>  	schedule_work(&beeper->work);
>
> @@ -93,6 +91,25 @@ static void pwm_beeper_close(struct input_dev *input)
>  	pwm_beeper_stop(beeper);
>  }
>
> +static void pwm_beeper_init_bell_frequency(struct device *dev,
> +					   struct pwm_beeper *beeper)
> +{
> +	struct device_node *node;
> +	unsigned int bell_frequency = 1000;
> +	int err;
> +
> +	if (IS_ENABLED(CONFIG_OF)) {

I don't think the check for CONFIG_OF is needed when using 
device_property_read_u32().

> +		node = dev->of_node;

node variable is never used

> +		err = device_property_read_u32(dev, "beeper-hz",
> +					       &bell_frequency);

Does the device_property_read_u32() function guarantee that 
bell_frequency is not modified when err < 0 ?

> +		if (err < 0)
> +			dev_dbg(dev, "Failed to read beeper-hz, using default: %u Hz\n",

"Failed" sounds like an error, but this is a perfectly normal thing to 
happen. Maybe better to say "'beeper-hz' not specified, using default: 
%u Hz\n".

> +				bell_frequency);
> +	}
> +
> +	beeper->bell_frequency = bell_frequency;
> +}
> +
>  static int pwm_beeper_probe(struct platform_device *pdev)
>  {
>  	unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
> @@ -122,6 +139,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
>  	pwm_apply_args(beeper->pwm);
>
>  	INIT_WORK(&beeper->work, pwm_beeper_work);
> +	pwm_beeper_init_bell_frequency(&pdev->dev, beeper);

This function is so simple, it could just be done inline here.

>
>  	beeper->input = input_allocate_device();
>  	if (!beeper->input) {
>

Re: [PATCH v2] Input: pwm-beeper: support customized freq for SND_BELL

[Rob Herring]

On Mon, Feb 20, 2017 at 09:37:43AM +0100, Heiko Schocher wrote:
> From: Guan Ben <ben.guan@cn.bosch.com>
> 
> extend the pwm-beeper driver to support customized frequency
> for SND_BELL from device tree.
> 
> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
> [hs@denx.de: adapted to 4.10-rc7]
> Signed-off-by: Heiko Schocher <hs@denx.de>
> 
> ---
> 
> Changes in v2:
> - add comment from Rob Herring:
>   rename property name "bell-frequency" to "beeper-hz"
> - add comment from Dmitry Torokhov:
>   use device_property_read_u32() instead of of_property_read_u32()
> - rebased against c470abd4fde40ea6a0846a2beab642a578c0b8cd
>   Linux 4.10
> 
>  .../devicetree/bindings/input/pwm-beeper.txt       |  3 ++

Acked-by: Rob Herring <robh@kernel.org>

A few comments on the driver though.

>  drivers/input/misc/pwm-beeper.c                    | 36 ++++++++++++++++------
>  2 files changed, 30 insertions(+), 9 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
> index be332ae..4e4e128 100644
> --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
> +++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
> @@ -5,3 +5,6 @@ Registers a PWM device as beeper.
>  Required properties:
>  - compatible: should be "pwm-beeper"
>  - pwms: phandle to the physical PWM device
> +
> +optional properties:
> +- beeper-hz:  bell frequency in Hz
> diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
> index 5f9655d..5ea6fda 100644
> --- a/drivers/input/misc/pwm-beeper.c
> +++ b/drivers/input/misc/pwm-beeper.c
> @@ -27,6 +27,7 @@ struct pwm_beeper {
>  	struct pwm_device *pwm;
>  	struct work_struct work;
>  	unsigned long period;
> +	unsigned int bell_frequency;
>  };
>  
>  #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
> @@ -58,20 +59,17 @@ static int pwm_beeper_event(struct input_dev *input,
>  	if (type != EV_SND || value < 0)
>  		return -EINVAL;
>  
> -	switch (code) {
> -	case SND_BELL:
> -		value = value ? 1000 : 0;
> -		break;
> -	case SND_TONE:
> -		break;
> -	default:
> +	if (code != SND_BELL && code != SND_TONE)
>  		return -EINVAL;
> -	}
>  
>  	if (value == 0)
>  		beeper->period = 0;
> -	else
> +	else {
> +		if (code == SND_BELL)
> +			value = beeper->bell_frequency;
> +
>  		beeper->period = HZ_TO_NANOSECONDS(value);
> +	}
>  
>  	schedule_work(&beeper->work);
>  
> @@ -93,6 +91,25 @@ static void pwm_beeper_close(struct input_dev *input)
>  	pwm_beeper_stop(beeper);
>  }
>  
> +static void pwm_beeper_init_bell_frequency(struct device *dev,
> +					   struct pwm_beeper *beeper)
> +{
> +	struct device_node *node;
> +	unsigned int bell_frequency = 1000;
> +	int err;
> +
> +	if (IS_ENABLED(CONFIG_OF)) {

You don't really need this. There should be an empty version of the 
function.

> +		node = dev->of_node;

You don't need this line.

> +		err = device_property_read_u32(dev, "beeper-hz",
> +					       &bell_frequency);
> +		if (err < 0)
> +			dev_dbg(dev, "Failed to read beeper-hz, using default: %u Hz\n",
> +				bell_frequency);
> +	}
> +
> +	beeper->bell_frequency = bell_frequency;
> +}
> +
>  static int pwm_beeper_probe(struct platform_device *pdev)
>  {
>  	unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
> @@ -122,6 +139,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
>  	pwm_apply_args(beeper->pwm);
>  
>  	INIT_WORK(&beeper->work, pwm_beeper_work);
> +	pwm_beeper_init_bell_frequency(&pdev->dev, beeper);
>  
>  	beeper->input = input_allocate_device();
>  	if (!beeper->input) {
> -- 
> 2.7.4
> 

Re: [v2] Input: pwm-beeper: support customized freq for SND_BELL

[Heiko Schocher]

Hello David,

Am 27.02.2017 um 19:11 schrieb David Lechner:
> On 02/20/2017 02:37 AM, Heiko Schocher wrote:
>> From: Guan Ben <ben.guan@cn.bosch.com>
>>
>> extend the pwm-beeper driver to support customized frequency
>> for SND_BELL from device tree.
>>
>> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
>> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
>> [hs@denx.de: adapted to 4.10-rc7]
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> ---
>>
>> Changes in v2:
>> - add comment from Rob Herring:
>>   rename property name "bell-frequency" to "beeper-hz"
>
> Is there a separate patch for the devicetree bindings documentation?

No, it is in this patch ... In the meantime I got an
Acked-by from Rob Herring ...

>> - add comment from Dmitry Torokhov:
>>   use device_property_read_u32() instead of of_property_read_u32()
>> - rebased against c470abd4fde40ea6a0846a2beab642a578c0b8cd
>>   Linux 4.10
>>
>>  .../devicetree/bindings/input/pwm-beeper.txt       |  3 ++
>>  drivers/input/misc/pwm-beeper.c                    | 36 ++++++++++++++++------
>>  2 files changed, 30 insertions(+), 9 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt
>> b/Documentation/devicetree/bindings/input/pwm-beeper.txt
>> index be332ae..4e4e128 100644
>> --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
>> +++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
>> @@ -5,3 +5,6 @@ Registers a PWM device as beeper.
>>  Required properties:
>>  - compatible: should be "pwm-beeper"
>>  - pwms: phandle to the physical PWM device
>> +
>> +optional properties:
>> +- beeper-hz:  bell frequency in Hz
>> diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
>> index 5f9655d..5ea6fda 100644
>> --- a/drivers/input/misc/pwm-beeper.c
>> +++ b/drivers/input/misc/pwm-beeper.c
>> @@ -27,6 +27,7 @@ struct pwm_beeper {
>>      struct pwm_device *pwm;
>>      struct work_struct work;
>>      unsigned long period;
>> +    unsigned int bell_frequency;
>>  };
>>
>>  #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
>> @@ -58,20 +59,17 @@ static int pwm_beeper_event(struct input_dev *input,
>>      if (type != EV_SND || value < 0)
>>          return -EINVAL;
>>
>> -    switch (code) {
>> -    case SND_BELL:
>> -        value = value ? 1000 : 0;
>
> This would be much simpler if you just changed the single line above:
>
>          value = value ? beeper->bell_frequency : 0;

Ok, I readded the switch statement, and changed this line.

>> -        break;
>> -    case SND_TONE:
>> -        break;
>> -    default:
>> +    if (code != SND_BELL && code != SND_TONE)
>>          return -EINVAL;
>> -    }
>>
>>      if (value == 0)
>>          beeper->period = 0;
>> -    else
>> +    else {
>> +        if (code == SND_BELL)
>> +            value = beeper->bell_frequency;
>> +
>>          beeper->period = HZ_TO_NANOSECONDS(value);
>> +    }
>>
>>      schedule_work(&beeper->work);
>>
>> @@ -93,6 +91,25 @@ static void pwm_beeper_close(struct input_dev *input)
>>      pwm_beeper_stop(beeper);
>>  }
>>
>> +static void pwm_beeper_init_bell_frequency(struct device *dev,
>> +                       struct pwm_beeper *beeper)
>> +{
>> +    struct device_node *node;
>> +    unsigned int bell_frequency = 1000;
>> +    int err;
>> +
>> +    if (IS_ENABLED(CONFIG_OF)) {
>
> I don't think the check for CONFIG_OF is needed when using device_property_read_u32().

Yes, removed.

>
>> +        node = dev->of_node;
>
> node variable is never used

Removed.

>
>> +        err = device_property_read_u32(dev, "beeper-hz",
>> +                           &bell_frequency);
>
> Does the device_property_read_u32() function guarantee that bell_frequency is not modified when err
> < 0 ?

Yes. This function "ends" in of_property_read_variable_u32_array()
which first searches the property (If not found returns) and if all
checks are fine, fills the "*out_values" with the values from the
property...

>> +        if (err < 0)
>> +            dev_dbg(dev, "Failed to read beeper-hz, using default: %u Hz\n",
>
> "Failed" sounds like an error, but this is a perfectly normal thing to happen. Maybe better to say
> "'beeper-hz' not specified, using default: %u Hz\n".

Changed.

>
>> +                bell_frequency);
>> +    }
>> +
>> +    beeper->bell_frequency = bell_frequency;
>> +}
>> +
>>  static int pwm_beeper_probe(struct platform_device *pdev)
>>  {
>>      unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
>> @@ -122,6 +139,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
>>      pwm_apply_args(beeper->pwm);
>>
>>      INIT_WORK(&beeper->work, pwm_beeper_work);
>> +    pwm_beeper_init_bell_frequency(&pdev->dev, beeper);
>
> This function is so simple, it could just be done inline here.

Indeed ... changed.

Thanks!

bye,
Heiko
>
>>
>>      beeper->input = input_allocate_device();
>>      if (!beeper->input) {
>>
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Re: [PATCH v2] Input: pwm-beeper: support customized freq for SND_BELL

[Heiko Schocher]

Hello Rob,

Am 27.02.2017 um 20:10 schrieb Rob Herring:
> On Mon, Feb 20, 2017 at 09:37:43AM +0100, Heiko Schocher wrote:
>> From: Guan Ben <ben.guan@cn.bosch.com>
>>
>> extend the pwm-beeper driver to support customized frequency
>> for SND_BELL from device tree.
>>
>> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
>> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
>> [hs@denx.de: adapted to 4.10-rc7]
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>
>> ---
>>
>> Changes in v2:
>> - add comment from Rob Herring:
>>    rename property name "bell-frequency" to "beeper-hz"
>> - add comment from Dmitry Torokhov:
>>    use device_property_read_u32() instead of of_property_read_u32()
>> - rebased against c470abd4fde40ea6a0846a2beab642a578c0b8cd
>>    Linux 4.10
>>
>>   .../devicetree/bindings/input/pwm-beeper.txt       |  3 ++
>
> Acked-by: Rob Herring <robh@kernel.org>

Thanks!

> A few comments on the driver though.
>
>>   drivers/input/misc/pwm-beeper.c                    | 36 ++++++++++++++++------
>>   2 files changed, 30 insertions(+), 9 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
>> index be332ae..4e4e128 100644
>> --- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
>> +++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
>> @@ -5,3 +5,6 @@ Registers a PWM device as beeper.
>>   Required properties:
>>   - compatible: should be "pwm-beeper"
>>   - pwms: phandle to the physical PWM device
>> +
>> +optional properties:
>> +- beeper-hz:  bell frequency in Hz
>> diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
>> index 5f9655d..5ea6fda 100644
>> --- a/drivers/input/misc/pwm-beeper.c
>> +++ b/drivers/input/misc/pwm-beeper.c
>> @@ -27,6 +27,7 @@ struct pwm_beeper {
>>   	struct pwm_device *pwm;
>>   	struct work_struct work;
>>   	unsigned long period;
>> +	unsigned int bell_frequency;
>>   };
>>
>>   #define HZ_TO_NANOSECONDS(x) (1000000000UL/(x))
>> @@ -58,20 +59,17 @@ static int pwm_beeper_event(struct input_dev *input,
>>   	if (type != EV_SND || value < 0)
>>   		return -EINVAL;
>>
>> -	switch (code) {
>> -	case SND_BELL:
>> -		value = value ? 1000 : 0;
>> -		break;
>> -	case SND_TONE:
>> -		break;
>> -	default:
>> +	if (code != SND_BELL && code != SND_TONE)
>>   		return -EINVAL;
>> -	}
>>
>>   	if (value == 0)
>>   		beeper->period = 0;
>> -	else
>> +	else {
>> +		if (code == SND_BELL)
>> +			value = beeper->bell_frequency;
>> +
>>   		beeper->period = HZ_TO_NANOSECONDS(value);
>> +	}
>>
>>   	schedule_work(&beeper->work);
>>
>> @@ -93,6 +91,25 @@ static void pwm_beeper_close(struct input_dev *input)
>>   	pwm_beeper_stop(beeper);
>>   }
>>
>> +static void pwm_beeper_init_bell_frequency(struct device *dev,
>> +					   struct pwm_beeper *beeper)
>> +{
>> +	struct device_node *node;
>> +	unsigned int bell_frequency = 1000;
>> +	int err;
>> +
>> +	if (IS_ENABLED(CONFIG_OF)) {
>
> You don't really need this. There should be an empty version of the
> function.

removed, as also David mentioned this.

>
>> +		node = dev->of_node;
>
> You don't need this line.

Yep, removed.

>
>> +		err = device_property_read_u32(dev, "beeper-hz",
>> +					       &bell_frequency);
>> +		if (err < 0)
>> +			dev_dbg(dev, "Failed to read beeper-hz, using default: %u Hz\n",
>> +				bell_frequency);
>> +	}
>> +
>> +	beeper->bell_frequency = bell_frequency;
>> +}
>> +
>>   static int pwm_beeper_probe(struct platform_device *pdev)
>>   {
>>   	unsigned long pwm_id = (unsigned long)dev_get_platdata(&pdev->dev);
>> @@ -122,6 +139,7 @@ static int pwm_beeper_probe(struct platform_device *pdev)
>>   	pwm_apply_args(beeper->pwm);
>>
>>   	INIT_WORK(&beeper->work, pwm_beeper_work);
>> +	pwm_beeper_init_bell_frequency(&pdev->dev, beeper);
>>
>>   	beeper->input = input_allocate_device();
>>   	if (!beeper->input) {
>> --
>> 2.7.4
>>
>

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Re: [v2] Input: pwm-beeper: support customized freq for SND_BELL

[David Lechner]

On 02/27/2017 11:19 PM, Heiko Schocher wrote:
> Hello David,
>
> Am 27.02.2017 um 19:11 schrieb David Lechner:
>> On 02/20/2017 02:37 AM, Heiko Schocher wrote:
>>> From: Guan Ben <ben.guan@cn.bosch.com>
>>>
>>> extend the pwm-beeper driver to support customized frequency
>>> for SND_BELL from device tree.
>>>
>>> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
>>> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
>>> [hs@denx.de: adapted to 4.10-rc7]
>>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>> ---
>>>
>>> Changes in v2:
>>> - add comment from Rob Herring:
>>>   rename property name "bell-frequency" to "beeper-hz"
>>
>> Is there a separate patch for the devicetree bindings documentation?
>
> No, it is in this patch ... In the meantime I got an
> Acked-by from Rob Herring ...
>

What I should have said is that, in general, I think it is preferred to 
have the device tree bindings as a separate patch from the code changes.

Re: [v2] Input: pwm-beeper: support customized freq for SND_BELL

[Heiko Schocher]

Hello David,

Am 28.02.2017 um 06:30 schrieb David Lechner:
> On 02/27/2017 11:19 PM, Heiko Schocher wrote:
>> Hello David,
>>
>> Am 27.02.2017 um 19:11 schrieb David Lechner:
>>> On 02/20/2017 02:37 AM, Heiko Schocher wrote:
>>>> From: Guan Ben <ben.guan@cn.bosch.com>
>>>>
>>>> extend the pwm-beeper driver to support customized frequency
>>>> for SND_BELL from device tree.
>>>>
>>>> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
>>>> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
>>>> [hs@denx.de: adapted to 4.10-rc7]
>>>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>>> ---
>>>>
>>>> Changes in v2:
>>>> - add comment from Rob Herring:
>>>>   rename property name "bell-frequency" to "beeper-hz"
>>>
>>> Is there a separate patch for the devicetree bindings documentation?
>>
>> No, it is in this patch ... In the meantime I got an
>> Acked-by from Rob Herring ...
>>
>
> What I should have said is that, in general, I think it is preferred to have the device tree
> bindings as a separate patch from the code changes.

I can split this into 2 patches ...

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Re: [v2] Input: pwm-beeper: support customized freq for SND_BELL

[Dmitry Torokhov]

On February 27, 2017 10:13:43 PM PST, Heiko Schocher <hs@denx.de> wrote:
>Hello David,
>
>Am 28.02.2017 um 06:30 schrieb David Lechner:
>> On 02/27/2017 11:19 PM, Heiko Schocher wrote:
>>> Hello David,
>>>
>>> Am 27.02.2017 um 19:11 schrieb David Lechner:
>>>> On 02/20/2017 02:37 AM, Heiko Schocher wrote:
>>>>> From: Guan Ben <ben.guan@cn.bosch.com>
>>>>>
>>>>> extend the pwm-beeper driver to support customized frequency
>>>>> for SND_BELL from device tree.
>>>>>
>>>>> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
>>>>> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
>>>>> [hs@denx.de: adapted to 4.10-rc7]
>>>>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>>>> ---
>>>>>
>>>>> Changes in v2:
>>>>> - add comment from Rob Herring:
>>>>>   rename property name "bell-frequency" to "beeper-hz"
>>>>
>>>> Is there a separate patch for the devicetree bindings
>documentation?
>>>
>>> No, it is in this patch ... In the meantime I got an
>>> Acked-by from Rob Herring ...
>>>
>>
>> What I should have said is that, in general, I think it is preferred
>to have the device tree
>> bindings as a separate patch from the code changes.
>
>I can split this into 2 patches ...

Don't - since Rob already asked DT change you don't need to post to device tree list again and I'll merge them back together since they do not make sense separately.


Thanks.

-- 
Dmitry

Re: [v2] Input: pwm-beeper: support customized freq for SND_BELL

[Heiko Schocher]

Hello Dimitry,

Am 28.02.2017 um 07:20 schrieb Dmitry Torokhov:
> On February 27, 2017 10:13:43 PM PST, Heiko Schocher <hs@denx.de> wrote:
>> Hello David,
>>
>> Am 28.02.2017 um 06:30 schrieb David Lechner:
>>> On 02/27/2017 11:19 PM, Heiko Schocher wrote:
>>>> Hello David,
>>>>
>>>> Am 27.02.2017 um 19:11 schrieb David Lechner:
>>>>> On 02/20/2017 02:37 AM, Heiko Schocher wrote:
>>>>>> From: Guan Ben <ben.guan@cn.bosch.com>
>>>>>>
>>>>>> extend the pwm-beeper driver to support customized frequency
>>>>>> for SND_BELL from device tree.
>>>>>>
>>>>>> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
>>>>>> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
>>>>>> [hs@denx.de: adapted to 4.10-rc7]
>>>>>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>>>>> ---
>>>>>>
>>>>>> Changes in v2:
>>>>>> - add comment from Rob Herring:
>>>>>>    rename property name "bell-frequency" to "beeper-hz"
>>>>>
>>>>> Is there a separate patch for the devicetree bindings
>> documentation?
>>>>
>>>> No, it is in this patch ... In the meantime I got an
>>>> Acked-by from Rob Herring ...
>>>>
>>>
>>> What I should have said is that, in general, I think it is preferred
>> to have the device tree
>>> bindings as a separate patch from the code changes.
>>
>> I can split this into 2 patches ...
>
> Don't - since Rob already asked DT change you don't need to post to device tree list again and I'll merge them back together since they do not make sense separately.

Ok, I post a v3 with the changes suggested from David and Rob soon,
without splitting.

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany