LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Paul Gortmaker <paul.gortmaker@windriver.com>,
	Shuah Khan <shuah@kernel.org>,
	linux-kernel@vger.kernel.org,
	Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH 3/3] lib: add module support to linked list sorting tests
Date: Tue, 28 Feb 2017 14:06:59 +0100
Message-ID: <1488287219-15832-4-git-send-email-geert@linux-m68k.org> (raw)
In-Reply-To: <1488287219-15832-1-git-send-email-geert@linux-m68k.org>

Extract the linked list sorting test code into its own source file, to
allow to compile it either to a loadable module, or builtin into the
kernel.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 lib/Kconfig.debug    |   7 +--
 lib/Makefile         |   1 +
 lib/list_sort.c      | 149 --------------------------------------------------
 lib/test_list_sort.c | 150 +++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 155 insertions(+), 152 deletions(-)
 create mode 100644 lib/test_list_sort.c

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 90b2348777495b72..32363ae022e3282a 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1731,11 +1731,12 @@ config LKDTM
 	Documentation/fault-injection/provoke-crashes.txt
 
 config TEST_LIST_SORT
-	bool "Linked list sorting test"
-	depends on DEBUG_KERNEL
+	tristate "Linked list sorting test"
+	depends on DEBUG_KERNEL || m
 	help
 	  Enable this to turn on 'list_sort()' function test. This test is
-	  executed only once during system boot, so affects only boot time.
+	  executed only once during system boot (so affects only boot time),
+	  or at module load time.
 
 	  If unsure, say N.
 
diff --git a/lib/Makefile b/lib/Makefile
index c9023efbd4ca2b11..6adb879a7feadbc5 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
 obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
 obj-$(CONFIG_TEST_KASAN) += test_kasan.o
 obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
+obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o
 obj-$(CONFIG_TEST_LKM) += test_module.o
 obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o
 obj-$(CONFIG_TEST_SORT) += test_sort.o
diff --git a/lib/list_sort.c b/lib/list_sort.c
index 3fe401067e20ba81..9e9acc37652f2814 100644
--- a/lib/list_sort.c
+++ b/lib/list_sort.c
@@ -1,6 +1,3 @@
-
-#define pr_fmt(fmt) "list_sort_test: " fmt
-
 #include <linux/kernel.h>
 #include <linux/bug.h>
 #include <linux/compiler.h>
@@ -145,149 +142,3 @@ void list_sort(void *priv, struct list_head *head,
 	merge_and_restore_back_links(priv, cmp, head, part[max_lev], list);
 }
 EXPORT_SYMBOL(list_sort);
-
-#ifdef CONFIG_TEST_LIST_SORT
-
-#include <linux/slab.h>
-#include <linux/random.h>
-
-/*
- * The pattern of set bits in the list length determines which cases
- * are hit in list_sort().
- */
-#define TEST_LIST_LEN (512+128+2) /* not including head */
-
-#define TEST_POISON1 0xDEADBEEF
-#define TEST_POISON2 0xA324354C
-
-struct debug_el {
-	unsigned int poison1;
-	struct list_head list;
-	unsigned int poison2;
-	int value;
-	unsigned serial;
-};
-
-/* Array, containing pointers to all elements in the test list */
-static struct debug_el **elts __initdata;
-
-static int __init check(struct debug_el *ela, struct debug_el *elb)
-{
-	if (ela->serial >= TEST_LIST_LEN) {
-		pr_err("error: incorrect serial %d\n", ela->serial);
-		return -EINVAL;
-	}
-	if (elb->serial >= TEST_LIST_LEN) {
-		pr_err("error: incorrect serial %d\n", elb->serial);
-		return -EINVAL;
-	}
-	if (elts[ela->serial] != ela || elts[elb->serial] != elb) {
-		pr_err("error: phantom element\n");
-		return -EINVAL;
-	}
-	if (ela->poison1 != TEST_POISON1 || ela->poison2 != TEST_POISON2) {
-		pr_err("error: bad poison: %#x/%#x\n",
-			ela->poison1, ela->poison2);
-		return -EINVAL;
-	}
-	if (elb->poison1 != TEST_POISON1 || elb->poison2 != TEST_POISON2) {
-		pr_err("error: bad poison: %#x/%#x\n",
-			elb->poison1, elb->poison2);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int __init cmp(void *priv, struct list_head *a, struct list_head *b)
-{
-	struct debug_el *ela, *elb;
-
-	ela = container_of(a, struct debug_el, list);
-	elb = container_of(b, struct debug_el, list);
-
-	check(ela, elb);
-	return ela->value - elb->value;
-}
-
-static int __init list_sort_test(void)
-{
-	int i, count = 1, err = -ENOMEM;
-	struct debug_el *el;
-	struct list_head *cur;
-	LIST_HEAD(head);
-
-	pr_debug("start testing list_sort()\n");
-
-	elts = kcalloc(TEST_LIST_LEN, sizeof(*elts), GFP_KERNEL);
-	if (!elts) {
-		pr_err("error: cannot allocate memory\n");
-		return err;
-	}
-
-	for (i = 0; i < TEST_LIST_LEN; i++) {
-		el = kmalloc(sizeof(*el), GFP_KERNEL);
-		if (!el) {
-			pr_err("error: cannot allocate memory\n");
-			goto exit;
-		}
-		 /* force some equivalencies */
-		el->value = prandom_u32() % (TEST_LIST_LEN / 3);
-		el->serial = i;
-		el->poison1 = TEST_POISON1;
-		el->poison2 = TEST_POISON2;
-		elts[i] = el;
-		list_add_tail(&el->list, &head);
-	}
-
-	list_sort(NULL, &head, cmp);
-
-	err = -EINVAL;
-	for (cur = head.next; cur->next != &head; cur = cur->next) {
-		struct debug_el *el1;
-		int cmp_result;
-
-		if (cur->next->prev != cur) {
-			pr_err("error: list is corrupted\n");
-			goto exit;
-		}
-
-		cmp_result = cmp(NULL, cur, cur->next);
-		if (cmp_result > 0) {
-			pr_err("error: list is not sorted\n");
-			goto exit;
-		}
-
-		el = container_of(cur, struct debug_el, list);
-		el1 = container_of(cur->next, struct debug_el, list);
-		if (cmp_result == 0 && el->serial >= el1->serial) {
-			pr_err("error: order of equivalent elements not "
-				"preserved\n");
-			goto exit;
-		}
-
-		if (check(el, el1)) {
-			pr_err("error: element check failed\n");
-			goto exit;
-		}
-		count++;
-	}
-	if (head.prev != cur) {
-		pr_err("error: list is corrupted\n");
-		goto exit;
-	}
-
-
-	if (count != TEST_LIST_LEN) {
-		pr_err("error: bad list length %d", count);
-		goto exit;
-	}
-
-	err = 0;
-exit:
-	for (i = 0; i < TEST_LIST_LEN; i++)
-		kfree(elts[i]);
-	kfree(elts);
-	return err;
-}
-late_initcall(list_sort_test);
-#endif /* CONFIG_TEST_LIST_SORT */
diff --git a/lib/test_list_sort.c b/lib/test_list_sort.c
new file mode 100644
index 0000000000000000..28e817387b04f1c8
--- /dev/null
+++ b/lib/test_list_sort.c
@@ -0,0 +1,150 @@
+#define pr_fmt(fmt) "list_sort_test: " fmt
+
+#include <linux/kernel.h>
+#include <linux/list_sort.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+
+/*
+ * The pattern of set bits in the list length determines which cases
+ * are hit in list_sort().
+ */
+#define TEST_LIST_LEN (512+128+2) /* not including head */
+
+#define TEST_POISON1 0xDEADBEEF
+#define TEST_POISON2 0xA324354C
+
+struct debug_el {
+	unsigned int poison1;
+	struct list_head list;
+	unsigned int poison2;
+	int value;
+	unsigned serial;
+};
+
+/* Array, containing pointers to all elements in the test list */
+static struct debug_el **elts __initdata;
+
+static int __init check(struct debug_el *ela, struct debug_el *elb)
+{
+	if (ela->serial >= TEST_LIST_LEN) {
+		pr_err("error: incorrect serial %d\n", ela->serial);
+		return -EINVAL;
+	}
+	if (elb->serial >= TEST_LIST_LEN) {
+		pr_err("error: incorrect serial %d\n", elb->serial);
+		return -EINVAL;
+	}
+	if (elts[ela->serial] != ela || elts[elb->serial] != elb) {
+		pr_err("error: phantom element\n");
+		return -EINVAL;
+	}
+	if (ela->poison1 != TEST_POISON1 || ela->poison2 != TEST_POISON2) {
+		pr_err("error: bad poison: %#x/%#x\n",
+			ela->poison1, ela->poison2);
+		return -EINVAL;
+	}
+	if (elb->poison1 != TEST_POISON1 || elb->poison2 != TEST_POISON2) {
+		pr_err("error: bad poison: %#x/%#x\n",
+			elb->poison1, elb->poison2);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int __init cmp(void *priv, struct list_head *a, struct list_head *b)
+{
+	struct debug_el *ela, *elb;
+
+	ela = container_of(a, struct debug_el, list);
+	elb = container_of(b, struct debug_el, list);
+
+	check(ela, elb);
+	return ela->value - elb->value;
+}
+
+static int __init list_sort_test(void)
+{
+	int i, count = 1, err = -ENOMEM;
+	struct debug_el *el;
+	struct list_head *cur;
+	LIST_HEAD(head);
+
+	pr_debug("start testing list_sort()\n");
+
+	elts = kcalloc(TEST_LIST_LEN, sizeof(*elts), GFP_KERNEL);
+	if (!elts) {
+		pr_err("error: cannot allocate memory\n");
+		return err;
+	}
+
+	for (i = 0; i < TEST_LIST_LEN; i++) {
+		el = kmalloc(sizeof(*el), GFP_KERNEL);
+		if (!el) {
+			pr_err("error: cannot allocate memory\n");
+			goto exit;
+		}
+		 /* force some equivalencies */
+		el->value = prandom_u32() % (TEST_LIST_LEN / 3);
+		el->serial = i;
+		el->poison1 = TEST_POISON1;
+		el->poison2 = TEST_POISON2;
+		elts[i] = el;
+		list_add_tail(&el->list, &head);
+	}
+
+	list_sort(NULL, &head, cmp);
+
+	err = -EINVAL;
+	for (cur = head.next; cur->next != &head; cur = cur->next) {
+		struct debug_el *el1;
+		int cmp_result;
+
+		if (cur->next->prev != cur) {
+			pr_err("error: list is corrupted\n");
+			goto exit;
+		}
+
+		cmp_result = cmp(NULL, cur, cur->next);
+		if (cmp_result > 0) {
+			pr_err("error: list is not sorted\n");
+			goto exit;
+		}
+
+		el = container_of(cur, struct debug_el, list);
+		el1 = container_of(cur->next, struct debug_el, list);
+		if (cmp_result == 0 && el->serial >= el1->serial) {
+			pr_err("error: order of equivalent elements not "
+				"preserved\n");
+			goto exit;
+		}
+
+		if (check(el, el1)) {
+			pr_err("error: element check failed\n");
+			goto exit;
+		}
+		count++;
+	}
+	if (head.prev != cur) {
+		pr_err("error: list is corrupted\n");
+		goto exit;
+	}
+
+
+	if (count != TEST_LIST_LEN) {
+		pr_err("error: bad list length %d", count);
+		goto exit;
+	}
+
+	err = 0;
+exit:
+	for (i = 0; i < TEST_LIST_LEN; i++)
+		kfree(elts[i]);
+	kfree(elts);
+	return err;
+}
+module_init(list_sort_test);
+MODULE_LICENSE("GPL");
-- 
2.7.4

  parent reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-28 13:06 [PATCH 0/3] lib: add module support to sort tests Geert Uytterhoeven
2017-02-28 13:06 ` [PATCH 1/3] Revert "lib/test_sort.c: make it explicitly non-modular" Geert Uytterhoeven
2017-02-28 14:24   ` Andy Shevchenko
2017-02-28 15:24     ` Geert Uytterhoeven
2017-02-28 13:06 ` [PATCH 2/3] lib: add module support to array-based sort tests Geert Uytterhoeven
2017-02-28 13:06 ` Geert Uytterhoeven [this message]
2017-02-28 14:28   ` [PATCH 3/3] lib: add module support to linked list sorting tests Arnd Bergmann
2017-02-28 14:43     ` Geert Uytterhoeven
2017-02-28 14:28 ` [PATCH 0/3] lib: add module support to sort tests Andy Shevchenko

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1488287219-15832-4-git-send-email-geert@linux-m68k.org \
    --to=geert@linux-m68k.org \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paul.gortmaker@windriver.com \
    --cc=shuah@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox