From: Philippe Reynes <tremyfr@gmail.com>
To: davem@davemloft.net, mugunthanvnm@ti.com,
akpm@linux-foundation.org, vbabka@suse.cz, jarod@redhat.com,
edumazet@google.com, iamjoonsoo.kim@lge.com, fw@strlen.de,
stephen@networkplumber.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH] net: sun: niu: use new api ethtool_{get|set}_link_ksettings
Date: Sat, 4 Mar 2017 17:50:06 +0100 [thread overview]
Message-ID: <1488646206-8966-1-git-send-email-tremyfr@gmail.com> (raw)
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/sun/niu.c | 37 ++++++++++++++++++++-----------------
1 files changed, 20 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 5797805..2dcca24 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -6813,7 +6813,8 @@ static void niu_get_drvinfo(struct net_device *dev,
sizeof(info->bus_info));
}
-static int niu_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static int niu_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
{
struct niu *np = netdev_priv(dev);
struct niu_link_config *lp;
@@ -6821,28 +6822,30 @@ static int niu_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
lp = &np->link_config;
memset(cmd, 0, sizeof(*cmd));
- cmd->phy_address = np->phy_addr;
- cmd->supported = lp->supported;
- cmd->advertising = lp->active_advertising;
- cmd->autoneg = lp->active_autoneg;
- ethtool_cmd_speed_set(cmd, lp->active_speed);
- cmd->duplex = lp->active_duplex;
- cmd->port = (np->flags & NIU_FLAGS_FIBER) ? PORT_FIBRE : PORT_TP;
- cmd->transceiver = (np->flags & NIU_FLAGS_XCVR_SERDES) ?
- XCVR_EXTERNAL : XCVR_INTERNAL;
+ cmd->base.phy_address = np->phy_addr;
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ lp->supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ lp->active_advertising);
+ cmd->base.autoneg = lp->active_autoneg;
+ cmd->base.speed = lp->active_speed;
+ cmd->base.duplex = lp->active_duplex;
+ cmd->base.port = (np->flags & NIU_FLAGS_FIBER) ? PORT_FIBRE : PORT_TP;
return 0;
}
-static int niu_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static int niu_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
{
struct niu *np = netdev_priv(dev);
struct niu_link_config *lp = &np->link_config;
- lp->advertising = cmd->advertising;
- lp->speed = ethtool_cmd_speed(cmd);
- lp->duplex = cmd->duplex;
- lp->autoneg = cmd->autoneg;
+ ethtool_convert_link_mode_to_legacy_u32(&lp->advertising,
+ cmd->link_modes.advertising);
+ lp->speed = cmd->base.speed;
+ lp->duplex = cmd->base.duplex;
+ lp->autoneg = cmd->base.autoneg;
return niu_init_link(np);
}
@@ -7902,14 +7905,14 @@ static int niu_set_phys_id(struct net_device *dev,
.nway_reset = niu_nway_reset,
.get_eeprom_len = niu_get_eeprom_len,
.get_eeprom = niu_get_eeprom,
- .get_settings = niu_get_settings,
- .set_settings = niu_set_settings,
.get_strings = niu_get_strings,
.get_sset_count = niu_get_sset_count,
.get_ethtool_stats = niu_get_ethtool_stats,
.set_phys_id = niu_set_phys_id,
.get_rxnfc = niu_get_nfc,
.set_rxnfc = niu_set_nfc,
+ .get_link_ksettings = niu_get_link_ksettings,
+ .set_link_ksettings = niu_set_link_ksettings,
};
static int niu_ldg_assign_ldn(struct niu *np, struct niu_parent *parent,
--
1.7.4.4
next reply other threads:[~2017-03-04 16:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-04 16:50 Philippe Reynes [this message]
2017-03-09 6:06 ` [PATCH] net: sun: niu: use new api ethtool_{get|set}_link_ksettings David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488646206-8966-1-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fw@strlen.de \
--cc=iamjoonsoo.kim@lge.com \
--cc=jarod@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).