From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1750851AbdCNHDy (ORCPT <rfc822;w@1wt.eu>);
        Tue, 14 Mar 2017 03:03:54 -0400
Received: from mailgw01.mediatek.com ([210.61.82.183]:27567 "EHLO
        mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org
        with ESMTP id S1750760AbdCNHDw (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Tue, 14 Mar 2017 03:03:52 -0400
Message-ID: <1489475016.1870.49.camel@mtkswgap22>
Subject: Re: [PATCH net-next 4/4] net-next: dsa: add dsa support for
 Mediatek MT7530 switch
From: Sean Wang <sean.wang@mediatek.com>
To: Andrew Lunn <andrew@lunn.ch>
CC: <f.fainelli@gmail.com>, <vivien.didelot@savoirfairelinux.com>,
        <matthias.bgg@gmail.com>, <robh+dt@kernel.org>, <mark.rutland@arm.com>,
        <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-mediatek@lists.infradead.org>,
        <davem@davemloft.net>, <Landen.Chao@mediatek.com>,
        <keyhaede@gmail.com>, <objelf@gmail.com>
Date: Tue, 14 Mar 2017 15:03:36 +0800
In-Reply-To: <20170313231117.GF14183@lunn.ch>
References: <1489421488-300-1-git-send-email-sean.wang@mediatek.com>
         <1489421488-300-5-git-send-email-sean.wang@mediatek.com>
         <20170313231117.GF14183@lunn.ch>
Content-Type: text/plain; charset="UTF-8"
X-Mailer: Evolution 3.2.3-0ubuntu6 
Content-Transfer-Encoding: 7bit
MIME-Version: 1.0
X-MTK: N
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On Tue, 2017-03-14 at 00:11 +0100, Andrew Lunn wrote:
> > +static int
> > +mt7530_setup(struct dsa_switch *ds)
> > +{
> > +	struct mt7530_priv *priv = ds->priv;
> > +	int ret, i, phy_mode;
> > +	u8  cpup_mask = 0;
> > +	u32 id, val;
> > +	struct regmap *regmap;
> > +
> > +	/* Make sure that cpu port specfied on the dt is appropriate */
> > +	if (!dsa_is_cpu_port(ds, MT7530_CPU_PORT)) {
> > +		dev_err(priv->dev, "port not matched with the CPU port\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	regmap = devm_regmap_init(ds->dev, NULL, priv,
> > +				  &mt7530_regmap_config);
> > +	if (IS_ERR(regmap))
> > +		dev_warn(priv->dev, "phy regmap initialization failed");
> > +
> > +	phy_mode = of_get_phy_mode(ds->ports[ds->dst->cpu_port].dn);
> > +	if (phy_mode < 0) {
> > +		dev_err(priv->dev, "Can't find phy-mode for master device\n");
> > +		return phy_mode;
> > +	}
> > +	dev_info(priv->dev, "phy-mode for master device = %x\n", phy_mode);
> 
> Hi Sean
> 
> It is not documented in the binding that a phy-mode is mandatory for
> the cpu port.
> 
>     Andrew

Hi Andrew,

thanks for your reviewing. I'll also add the missing part into the next
one. 
	Sean