From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965035AbdCXBBE (ORCPT ); Thu, 23 Mar 2017 21:01:04 -0400 Received: from mail.kernel.org ([198.145.29.136]:57526 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934663AbdCXBA5 (ORCPT ); Thu, 23 Mar 2017 21:00:57 -0400 From: Alan Tull To: Greg Kroah-Hartman Cc: Moritz Fischer , Alan Tull , linux-kernel@vger.kernel.org, linux-fpga@vger.kernel.org, Alan Tull Subject: [PATCH 4/8] fpga: add config complete timeout Date: Thu, 23 Mar 2017 19:34:27 -0500 Message-Id: <1490315671-5076-5-git-send-email-atull@kernel.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1490315671-5076-1-git-send-email-atull@kernel.org> References: <1490315671-5076-1-git-send-email-atull@kernel.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Alan Tull Adding timeout for maximum allowed time for FPGA to go to operating mode after a FPGA region has been programmed. Signed-off-by: Alan Tull --- drivers/fpga/fpga-region.c | 3 +++ include/linux/fpga/fpga-mgr.h | 3 +++ 2 files changed, 6 insertions(+) diff --git a/drivers/fpga/fpga-region.c b/drivers/fpga/fpga-region.c index 2fe2a52..ae4c61a 100644 --- a/drivers/fpga/fpga-region.c +++ b/drivers/fpga/fpga-region.c @@ -385,6 +385,9 @@ static int fpga_region_notify_pre_apply(struct fpga_region *region, of_property_read_u32(nd->overlay, "region-freeze-timeout-us", &info->disable_timeout_us); + of_property_read_u32(nd->overlay, "config-complete-timeout-us", + &info->config_complete_timeout_us); + /* If FPGA was externally programmed, don't specify firmware */ if ((info->flags & FPGA_MGR_EXTERNAL_CONFIG) && firmware_name) { pr_err("error: specified firmware and external-fpga-config"); diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h index e2ef94f..b4ac24c 100644 --- a/include/linux/fpga/fpga-mgr.h +++ b/include/linux/fpga/fpga-mgr.h @@ -77,11 +77,14 @@ enum fpga_mgr_states { * @flags: boolean flags as defined above * @enable_timeout_us: maximum time to enable traffic through bridge (uSec) * @disable_timeout_us: maximum time to disable traffic through bridge (uSec) + * @config_complete_timeout_us: maximum time for FPGA to switch to operating + * status in the write_complete op. */ struct fpga_image_info { u32 flags; u32 enable_timeout_us; u32 disable_timeout_us; + u32 config_complete_timeout_us; }; /** -- 2.7.4