From: Jagan Teki <jagan@openedev.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Matteo Lisi <matteo.lisi@engicam.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v3 8/9] ARM: dts: imx6qdl-icore-rqs: Add CAN nodes
Date: Thu, 6 Apr 2017 23:32:14 +0530 [thread overview]
Message-ID: <1491501735-1649-9-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1491501735-1649-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Add support for can1 and can2 nodes on Engicam i.CoreM6 RQS
QDL module boards.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- none
Changes for v2:
- s/flexcan/can
- s/pinctrl_flexcan/pinctrl_can
arch/arm/boot/dts/imx6dl-icore-rqs.dts | 8 ++++++++
arch/arm/boot/dts/imx6q-icore-rqs.dts | 8 ++++++++
arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 26 ++++++++++++++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
index 053e7cb..74335c4 100644
--- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
@@ -60,3 +60,11 @@
VDDD-supply = <®_1p8v>;
};
};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
index d45e4f5..2d4539a 100644
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -49,6 +49,14 @@
compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
};
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
&i2c3 {
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index 0e79a5b..998fa77 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -145,6 +145,18 @@
};
};
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_3p3v>;
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ xceiver-supply = <®_3p3v>;
+};
+
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
@@ -296,6 +308,20 @@
>;
};
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
--
1.9.1
next prev parent reply other threads:[~2017-04-06 18:04 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-06 18:02 [PATCH v3 0/9] ARM: dts: i.MX6: Add lcdif/sound nodes on Engicam SOMs Jagan Teki
2017-04-06 18:02 ` [PATCH v3 1/9] ARM: dts: imx6ul-isiot: Add Sound card with codec node Jagan Teki
2017-04-07 13:16 ` Shawn Guo
2017-06-14 14:47 ` Jagan Teki
2017-06-15 2:20 ` Shawn Guo
2017-06-15 4:51 ` Jagan Teki
2017-06-15 7:15 ` Shawn Guo
2017-06-15 7:31 ` Jagan Teki
2017-06-15 7:51 ` Shawn Guo
2017-06-15 13:15 ` Jagan Teki
2017-04-06 18:02 ` [PATCH v3 2/9] ARM: dts: imx6ul-geam: " Jagan Teki
2017-04-07 13:19 ` Shawn Guo
2017-04-06 18:02 ` [PATCH v3 3/9] ARM: dts: imx6qdl-icore: " Jagan Teki
2017-04-07 13:23 ` Shawn Guo
2017-04-06 18:02 ` [PATCH v3 4/9] ARM: dts: imx6dl-icore-rqs: Add sgtl5000 " Jagan Teki
2017-04-06 18:02 ` [PATCH v3 5/9] ARM: dts: imx6qdl-icore-rqs: Replace to use simple-audio-card Jagan Teki
2017-04-06 18:02 ` [PATCH v3 6/9] ARM: dts: imx6dl-icore: Add LVDS support Jagan Teki
2017-04-06 18:02 ` [PATCH v3 7/9] ARM: dts: imx6dl-icore: Add touchscreen node Jagan Teki
2017-04-06 18:02 ` Jagan Teki [this message]
2017-04-06 18:02 ` [PATCH v3 9/9] ARM: dts: imx6ul-isiot: Add FEC node support Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491501735-1649-9-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=jagan@amarulasolutions.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matteo.lisi@engicam.com \
--cc=michael@amarulasolutions.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).