From: Smitha T Murthy <smitha.t@samsung.com>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
kyungmin.park@samsung.com, kamil@wypas.org, jtp.park@samsung.com,
a.hajda@samsung.com, mchehab@kernel.org,
pankaj.dubey@samsung.com, krzk@kernel.org,
m.szyprowski@samsung.com
Subject: Re: [Patch v4 12/12] Documention: v4l: Documentation for HEVC CIDs
Date: Fri, 07 Apr 2017 15:33:29 +0530 [thread overview]
Message-ID: <1491559409.15698.1237.camel@smitha-fedora> (raw)
In-Reply-To: <f68d8bd2-a2b4-7253-0a48-6c3f509e66cd@samsung.com>
On Thu, 2017-04-06 at 16:47 +0200, Sylwester Nawrocki wrote:
> On 04/06/2017 08:11 AM, Smitha T Murthy wrote:
> > Added V4l2 controls for HEVC encoder
>
> s/HEVC/H.265/HEVC ?
>
Ok I will change it.
> > Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
> > ---
> > Documentation/media/uapi/v4l/extended-controls.rst | 391 +++++++++++++++++++++
> > 1 file changed, 391 insertions(+)
> >
> > diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
> > index abb1057..85a668d 100644
> > --- a/Documentation/media/uapi/v4l/extended-controls.rst
> > +++ b/Documentation/media/uapi/v4l/extended-controls.rst
> > @@ -1960,6 +1960,397 @@ enum v4l2_vp8_golden_frame_sel -
> > 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.
> >
> >
> > +HEVC Control Reference
>
> Perhaps "High Efficiency Video Coding (HEVC/H.265) Control Reference" ?
>
I will change it.
> > +---------------------
> > +
> > +The HEVC controls include controls for encoding parameters of HEVC video
> > +codec.
>
> s/'HEVC'/'HEVC/H.265' ?
>
Ok I will change it.
> > +
> > +
> > +.. _hevc-control-id:
> > +
> > +HEVC Control IDs
>
> s/'HEVC'/'HEVC/H.265' ?
>
I will change it.
> > +^^^^^^^^^^^^^^^
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP``
> > + Minimum quantization parameter for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP``
> > + Maximum quantization parameter for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP``
> > + Quantization parameter for an I frame for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP``
> > + Quantization parameter for a P frame for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP``
> > + Quantization parameter for a B frame for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_QP``
> > + HIERARCHICAL_QP allows host to specify the quantization parameter values
> > + for each temporal layer through HIERARCHICAL_QP_LAYER. This is valid only
> > + if HIERARCHICAL_CODING_LAYER is greater than 1.
> > +
> > +.. _v4l2-hevc-hierarchical-coding-type:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_TYPE``
> > + (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_hier_coding_type -
> > + Selects the hierarchical coding type for encoding. Possible values are:
> > +
> > +.. raw:: latex
> > +
> > + \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B``
> > + - Use the B frame for hierarchical coding.
> > + * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P``
> > + - Use the P frame for hierarchical coding.
> > +
> > +.. raw:: latex
> > +
> > + \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER``
> > + Selects the hierarchical coding layer. In normal encoding
> > + (non-hierarchial coding), it should be zero. Possible values are 0 ~ 6.
> > + 0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING
> > + LAYER 1 and so on.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_QP``
> > + Indicates the hierarchical coding layer quantization parameter.
> > + For HEVC it can have a value of 0-51. Hence in the control value passed
> > + the LSB 16 bits will indicate the quantization parameter. The MSB 16 bit
> > + will pass the layer(0-6) it is meant for.
> > +
> > +.. _v4l2-hevc-profile:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE``
> > + (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_profile -
> > + Select the desired profile for HEVC encoder.
> > +
> > +.. raw:: latex
> > +
> > + \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN``
> > + - Main profile.
> > + * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE``
> > + - Main still picture profile.
> > +
> > +.. raw:: latex
> > +
> > + \end{adjustbox}
> > +
> > +
> > +.. _v4l2-hevc-level:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL``
> > + (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_level -
> > + Select the desired level for HEVC encoder.
> > +
> > +.. raw:: latex
> > +
> > + \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``
> > + - Level 1.0
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``
> > + - Level 2.0
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``
> > + - Level 2.1
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``
> > + - Level 3.0
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``
> > + - Level 3.1
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``
> > + - Level 4.0
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``
> > + - Level 4.1
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``
> > + - Level 5.0
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``
> > + - Level 5.1
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``
> > + - Level 5.2
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``
> > + - Level 6.0
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``
> > + - Level 6.1
> > + * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``
> > + - Level 6.2
> > +
> > +.. raw:: latex
> > +
> > + \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION``
> > + Indicates the number of evenly spaced subintervals, called ticks, within
> > + one modulo time. One modulo time represents the fixed interval of one
> > + second. This is a 16bit unsigned integer and has a maximum value upto
>
> s/upto/up to/
>
I will change it.
> > + 0xffff.
> > +
> > +.. _v4l2-hevc-profile:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_TIER_FLAG``
> > + (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_tier_flag -
> > + TIER_FLAG specifies tier information of the HEVC encoded picture. Tier were
> > + made to deal with applications that differ in terms of maximum bit rate.
> > + Setting the flag to 0 selects HEVC tier_flag as Main tier and setting this
> > + flag to 1 indicates High tier. High tier is for very demanding applications
>
> Demanding in terms of bit rate, i.e. requiring high bit rate? It's a bit
> unclear here.
>
Yes correct demanding in terms of requiring high bit rate. I will make
it more clear.
> > +.. raw:: latex
> > +
> > + \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN``
> > + - Main tier.
> > + * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH``
> > + - High tier.
> > +
> > +.. raw:: latex
> > +
> > + \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH``
> > + Selects HEVC maximum coding unit depth.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF``
> > + Indicates loop filtering. Control ID 0 indicates loop filtering
> > + is enabled and when set to 1 indicates no filter.
>
> "Setting this control to 0 enables loop filtering, setting this control
> to 1 disables loop filtering." ?
>
> Couldn't the meaning be inverted, so setting the control to 0 disables
> the loop filtering?
>
>From register point of view, this control value needs be 0 to enable
loop filtering.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF_SLICE_BOUNDARY``
> > + Selects whether to apply the loop filter across the slice boundary or not.
> > + If the value is 0, loop filter will not be applied across the slice boundary.
> > + If the value is 1, loop filter will be applied across the slice boundary.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2``
> > + Selects HEVC loop filter beta offset. The valid range is [-6, +6].
>
> > + This could be a negative value in the 2's complement expression.
>
> I don't think second sentence is needed.
>
I will remove it.
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2``
> > + Selects HEVC loop filter tc offset. The valid range is [-6, +6].
>
> > + This could be a negative value in the 2's complement expression.
>
> Ditto.
>
I will remove it.
> > +.. _v4l2-hevc-refresh-type:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
> > + (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_hier_refresh_type -
> > + Selects refresh type for HEVC encoder.
> > + Host has to specify the period into
> > + HEVC_REFRESH_PERIOD.
> > +
> > +.. raw:: latex
> > +
> > + \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE``
> > + - Use the B frame for hierarchical coding.
> > + * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA``
> > + - Use CRA(Clean Random Access Unit) picture encoding.
> > + * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR``
> > + - Use IDR picture encoding.
> > +
> > +.. raw:: latex
> > +
> > + \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD``
> > + Selects the refresh period for HEVC encoder.
> > + This specifies the number of I picture between two CRA/IDR pictures.
> > + This is valid only if REFRESH_TYPE is not 0.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU``
> > + Indicates HEVC lossless encoding. Setting it to 0 disables lossless
> > + encoding. Setting it to 1 enables lossless encoding.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED``
> > + Indicates constant intra prediction for HEVC encoder. Specifies the
> > + constrained intra prediction in which intra largest coding unit(LCU)
> > + prediction is performed by using residual data and decoded samples of
> > + neighboring intra LCU only. Setting it to 1 enables this control ID and
> > + setting it to 0 disables the control ID.
>
> Could you avoid "disables the control ID", "enables control ID" phrases?
> And instead describe indirectly what behaviour corresponds to each value of the
> control? So the last sentence becomes something like:
>
> "Setting the control to 0 disables ..., setting the control to 1 enables..."
>
Yes I will add sentences describing the behaviour for all the controls.
> > +``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT``
> > + Indicates wavefront parallel processing for HEVC encoder. Setting it to 0
> > + disables the control ID and setting it to 1 enables the wavefront parallel
> > + processing.
>
> Ditto.
>
> > +``V4L2_CID_MPEG_VIDEO_HEVC_SIGN_DATA_HIDING``
> > + Setting it to 1 indicates sign data hiding for HEVC encoder. Setting it to
> > + 0 disables the control ID.
>
> Ditto.
>
> > +``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB``
> > + Setting the control ID to 1 enables general picture buffers for HEVC
>
> s/control ID/control/
>
I will change it.
> > + encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID``
> > + Indicates temporal identifier specified as temporal_id in
> > + nal_unit_header_svc_extension() for HEVC encoder which is enabled by
>
> What is nal_unit_header_svc_extension(), where it comes from?
>
Sorry I had to add nal_unit_header() instead of
nal_unit_header_svc_extension() as specified in the H.265 codec
specification document.
> > + setting the control ID to 1.
>
> s/control ID/control/
>
I will change it.
> > +``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING``
> > + Indicates bi-linear interpolation is conditionally used in the intra
> > + prediction filtering process in the CVS when set to 1. Indicates bi-linear
> > + interpolation is not used in the CVS when set to 0.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1``
> > + Indicates max number of merge candidate motion vectors.
>
> s/max/maximum/ ?
>
I will change it.
> > + Values are from zero to four.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_INTRA_PU_SPLIT``
> > + Indicates intra prediction unit split for HEVC Encoder. Setting it to 1
> > + disables the feature. Setting it to 1 enables the feature.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION``
> > + Indicates temporal motion vector prediction for HEVC encoder. Setting it to
> > + 0 enables the prediction. Setting it to 1 disables the prediction.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE``
> > + Specifies if HEVC generates a stream with a size of length field instead of
> > + start code pattern. The size of the length field is configurable among 1,2
>
> s/the length/length/
>
I will correct it.
> > + or 4 thorugh the SIZE_OF_LENGTH_FIELD. It is not applied at SEQ_START.
>
> s/thorugh/through/
> s/SIZE_OF_LENGTH_FIELD/V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control.
> I would also drop "among 1,2 or 4" as this information belongs to the
> V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD control's description.
>
Ok I will correct it.
> > + Setting it to 0 disables the control ID. Setting it to 1 will enables
> > + the control ID.
>
> Again, please specify explicitly what behaviour corresponds to each value
> of the control.
>
Ok I will add behaviour to describe the values.
> > +``V4L2_CID_MPEG_VIDEO_HEVC_QP_INDEX_CR``
> > + Indicates the quantization parameter CR index.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_QP_INDEX_CB``
> > + Indicates the quantization parameter CB index.
> > +
> > +.. _v4l2-hevc-size-of-length-field:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD``
> > +(enum)
> > +
> > +enum v4l2_mpeg_video_hevc_size_of_length_field -
> > + Indicates the size of length field.
> > + This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled.
> > +
> > +.. raw:: latex
> > +
> > + \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > + :header-rows: 0
> > + :stub-columns: 0
> > +
> > + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0``
> > + - Generate start code pattern (Normal).
> > + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1``
> > + - Generate size of length field instead of start code pattern and length is 1.
> > + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2``
> > + - Generate size of length field instead of start code pattern and length is 2.
> > + * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4``
> > + - Generate size of length field instead of start code pattern and length is 4.
> > +
> > +.. raw:: latex
> > +
> > + \end{adjustbox}
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER0_BITRATE``
> > + Indicates bit rate for hierarchical coding layer 0 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER1_BITRATE``
> > + Indicates bit rate for hierarchical coding layer 1 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER2_BITRATE``
> > + Indicates bit rate for hierarchical coding layer 2 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER3_BITRATE``
> > + Indicates bit rate for hierarchical coding layer 3 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER4_BITRATE``
> > + Indicates bit rate for hierarchical coding layer 4 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER5_BITRATE``
> > + Indicates bit rate for hierarchical coding layer 5 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER6_BITRATE``
> > + Indicates bit rate for hierarchical coding layer 6 for HEVC encoder.
> > +
> > +
> > +MFC 10.10 MPEG Controls
> > +-----------------------
> > +
> > +The following MPEG class controls deal with MPEG decoding and encoding
> > +settings that are specific to the Multi Format Codec 10.10 device present
> > +in the S5P family of SoCs by Samsung.
>
> "S5P and Exynos" ?
>
Ok I will add Exynos too.
> > +
> > +.. _mfc1010-control-id:
> > +
> > +MFC 10.10 Control IDs
> > +^^^^^^^^^^^^^^^^^^^^^
> > +
> > +``V4L2_CID_MPEG_MFC1010_VIDEO_HEVC_REF_NUMBER_FOR_PFRAMES``
> > + Selects number of P reference picture required for HEVC encoder.
>
> s/picture/pictures
> or s/picture/frames ?
>
I will change it.
> > + P-Frame can use 1 or 2 frames for reference.
> > +
> > +``V4L2_CID_MPEG_MFC1010_VIDEO_HEVC_ADAPTIVE_RC_DARK``
> > + Indicates HEVC dark region adaptive rate control.
> > +
> > +``V4L2_CID_MPEG_MFC1010_VIDEO_HEVC_ADAPTIVE_RC_SMOOTH``
> > + Indicates HEVC smooth region adaptive rate control.
> > +
> > +``V4L2_CID_MPEG_MFC1010_VIDEO_HEVC_ADAPTIVE_RC_STATIC``
> > + Indicates HEVC static region adaptive rate control.
> > +
> > +``V4L2_CID_MPEG_MFC1010_VIDEO_HEVC_ADAPTIVE_RC_ACTIVITY``
> > + Indicates HEVC activity region adaptive rate control.
>
> For the above controls it is not clear if these are boolean controls
> and which value corresponds to what behaviour.
>
I will add the value and corresponding behaviour.
> > +``V4L2_CID_MPEG_MFC1010_VIDEO_HEVC_PREPEND_SPSPPS_TO_IDR``
> > + Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
> > + disables it and setting it to one enables the feature.
>
> "Setting the control to 0 disables generating SPS, PPS at every IDR,
> setting the control to 1 enables generating SPS, PPS at every IDR."
>
>
Ok I will change the controls description as above.
> How about using MFC10 instead of MFC1010 for the controls IDs?
>
There are various version of MFC10 like MFCv10.0, MFC v10.10, MFCv10.11,
MFCv10.20. I will check if these controls are specific to MFCv10.10, if
not I will change it to MFC10.
Thank you for the review.
Regards,
Smitha
next prev parent reply other threads:[~2017-04-07 10:01 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170406060957epcas1p36f883512ccfaf24359d1b31a6d199d87@epcas1p3.samsung.com>
2017-04-06 6:11 ` [Patch v4 00/12] Add MFC v10.10 support Smitha T Murthy
[not found] ` <CGME20170406060959epcas1p3dbc6a99eca8f84dfc16da8e288615faa@epcas1p3.samsung.com>
2017-04-06 6:11 ` [Patch v4 01/12] [media] s5p-mfc: Rename IS_MFCV8 macro Smitha T Murthy
[not found] ` <CGME20170406061002epcas5p25eecf7a82218d8affcd1938ff4a9a97b@epcas5p2.samsung.com>
2017-04-06 6:11 ` [Patch v4 02/12] [media] s5p-mfc: Adding initial support for MFC v10.10 Smitha T Murthy
[not found] ` <CGME20170406061004epcas5p2737089d747713898c1737ba939945e31@epcas5p2.samsung.com>
2017-04-06 6:11 ` [Patch v4 03/12] [media] s5p-mfc: Use min scratch buffer size as provided by F/W Smitha T Murthy
[not found] ` <CGME20170406061007epcas5p2e1dccf4e2e13ac002ac0b6bfa9d9695c@epcas5p2.samsung.com>
2017-04-06 6:11 ` [Patch v4 04/12] [media] s5p-mfc: Support MFCv10.10 buffer requirements Smitha T Murthy
[not found] ` <CGME20170406061010epcas5p22e8100bbd1456007fb4fff327d1f81c8@epcas5p2.samsung.com>
2017-04-06 6:11 ` [Patch v4 05/12] [media] videodev2.h: Add v4l2 definition for HEVC Smitha T Murthy
[not found] ` <CGME20170406061013epcas5p214b60d10e809974bcd0283319a66048e@epcas5p2.samsung.com>
2017-04-06 6:11 ` [Patch v4 06/12] [media] v4l2-ioctl: add HEVC format description Smitha T Murthy
[not found] ` <CGME20170406061015epcas1p3488865b9f19fee1a799867106729307f@epcas1p3.samsung.com>
2017-04-06 6:11 ` [Patch v4 07/12] Documentation: v4l: Documentation for HEVC v4l2 definition Smitha T Murthy
[not found] ` <CGME20170406061018epcas1p373b834b21fc7a39759c8424106215eb5@epcas1p3.samsung.com>
2017-04-06 6:11 ` [Patch v4 08/12] [media] s5p-mfc: Add support for HEVC decoder Smitha T Murthy
[not found] ` <CGME20170406061021epcas5p25af9b201e7e990bd7c2ade8ec765655a@epcas5p2.samsung.com>
2017-04-06 6:11 ` [Patch v4 09/12] [media] s5p-mfc: Add VP9 decoder support Smitha T Murthy
[not found] ` <CGME20170406061023epcas5p2a3fa65c4254e17a58f71c68d413e6bfd@epcas5p2.samsung.com>
2017-04-06 6:11 ` [Patch v4 10/12] [media] v4l2: Add v4l2 control IDs for HEVC encoder Smitha T Murthy
2017-04-06 13:14 ` Sylwester Nawrocki
2017-04-07 8:31 ` Smitha T Murthy
2017-04-07 9:25 ` Sylwester Nawrocki
2017-04-07 9:54 ` Smitha T Murthy
[not found] ` <CGME20170406061025epcas1p3d1124e640df01d2e8a28e12138371b2b@epcas1p3.samsung.com>
2017-04-06 6:11 ` [Patch v4 11/12] [media] s5p-mfc: Add support " Smitha T Murthy
[not found] ` <CGME20170406061027epcas5p2628e0a8e0fd76e2e267fad3ea1209f65@epcas5p2.samsung.com>
2017-04-06 6:11 ` [Patch v4 12/12] Documention: v4l: Documentation for HEVC CIDs Smitha T Murthy
2017-04-06 13:33 ` Hans Verkuil
2017-04-07 8:37 ` Smitha T Murthy
2017-04-06 14:47 ` Sylwester Nawrocki
2017-04-07 10:03 ` Smitha T Murthy [this message]
2017-04-07 10:26 ` Sylwester Nawrocki
2017-04-07 12:08 ` Smitha T Murthy
2017-06-09 17:36 ` [Patch v4 00/12] Add MFC v10.10 support Sylwester Nawrocki
2017-06-13 5:24 ` Smitha T Murthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491559409.15698.1237.camel@smitha-fedora \
--to=smitha.t@samsung.com \
--cc=a.hajda@samsung.com \
--cc=jtp.park@samsung.com \
--cc=kamil@wypas.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mchehab@kernel.org \
--cc=pankaj.dubey@samsung.com \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).