From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1763014AbdDSM04 (ORCPT ); Wed, 19 Apr 2017 08:26:56 -0400 Received: from mailapp01.imgtec.com ([195.59.15.196]:53757 "EHLO mailapp01.imgtec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1762480AbdDSM0x (ORCPT ); Wed, 19 Apr 2017 08:26:53 -0400 From: Matt Redfearn To: Ralf Baechle , Daniel Lezcano CC: , Matt Redfearn , , Thomas Gleixner , James Hogan Subject: [PATCH 1/2] MIPS: Malta: Probe gic-timer via devicetree Date: Wed, 19 Apr 2017 13:26:45 +0100 Message-ID: <1492604806-23420-1-git-send-email-matt.redfearn@imgtec.com> X-Mailer: git-send-email 2.7.4 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.150.130.83] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The Malta platform is the only platform remaining to probe the GIC clocksource via gic_clocksource_init. This route hardcodes an expected virq number based on MIPS_GIC_IRQ_BASE, which can be fragile to the eventual virq layout. Instread, probe the driver using the preferred and more modern devicetree method. Before the driver is probed, set the "clock-frequency" property of the devicetree node to the value detected by Malta platform code. Signed-off-by: Matt Redfearn --- arch/mips/mti-malta/malta-time.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c index 1829a9031eec..289edcfadd7c 100644 --- a/arch/mips/mti-malta/malta-time.c +++ b/arch/mips/mti-malta/malta-time.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -207,6 +208,33 @@ static void __init init_rtc(void) CMOS_WRITE(ctrl & ~RTC_SET, RTC_CONTROL); } +#ifdef CONFIG_CLKSRC_MIPS_GIC +static u32 gic_frequency_dt; + +static struct property gic_frequency_prop = { + .name = "clock-frequency", + .length = sizeof(u32), + .value = &gic_frequency_dt, +}; + +static void update_gic_frequency_dt(void) +{ + struct device_node *node; + + gic_frequency_dt = cpu_to_be32(gic_frequency); + + node = of_find_compatible_node(NULL, NULL, "mti,gic-timer"); + if (!node) { + pr_err("mti,gic-timer device node not found\n"); + return; + } + + if (of_update_property(node, &gic_frequency_prop) < 0) + pr_err("error updating gic frequency property\n"); +} + +#endif + void __init plat_time_init(void) { unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK); @@ -236,7 +264,8 @@ void __init plat_time_init(void) printk("GIC frequency %d.%02d MHz\n", freq/1000000, (freq%1000000)*100/1000000); #ifdef CONFIG_CLKSRC_MIPS_GIC - gic_clocksource_init(gic_frequency); + update_gic_frequency_dt(); + clocksource_probe(); #endif } #endif -- 2.7.4