From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1037943AbdDUKaC (ORCPT ); Fri, 21 Apr 2017 06:30:02 -0400 Received: from botnar.kaiser.cx ([176.28.20.183]:49362 "EHLO botnar.kaiser.cx" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1036720AbdDUK35 (ORCPT ); Fri, 21 Apr 2017 06:29:57 -0400 From: Martin Kaiser To: linux-fbdev@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz , Sascha Hauer , linux-kernel@vger.kernel.org, Rob Herring , Mark Rutland , devicetree@vger.kernel.org, Martin Kaiser Subject: [PATCH 2/2] dt-bindings: display: imx: entry for AUS mode Date: Fri, 21 Apr 2017 12:29:09 +0200 Message-Id: <1492770549-7347-2-git-send-email-martin@kaiser.cx> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1492770549-7347-1-git-send-email-martin@kaiser.cx> References: <1488193030-13064-1-git-send-email-martin@kaiser.cx> <1492770549-7347-1-git-send-email-martin@kaiser.cx> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Allow setting AUS mode for a display from the device tree. Use an optional boolean property. AUS mode can be set only on imx21 and compatible chipsets. Signed-off-by: Martin Kaiser Acked-by: Rob Herring --- v4: rename the DT property to fsl,aus-mode v3: use a boolean DT property instead of the register value separate patches for DT binding and code changes v2: re-sending DT bindings and code changes as one patch Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt index 7a5c0e2..e5a8b36 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt @@ -13,6 +13,8 @@ Required nodes: Additional, the display node has to define properties: - bits-per-pixel: Bits per pixel - fsl,pcr: LCDC PCR value + A display node may optionally define + - fsl,aus-mode: boolean to enable AUS mode (only for imx21) Optional properties: - lcd-supply: Regulator for LCD supply voltage. -- 2.1.4