From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1173309AbdDXUFm (ORCPT ); Mon, 24 Apr 2017 16:05:42 -0400 Received: from mga02.intel.com ([134.134.136.20]:54033 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S977276AbdDXUFf (ORCPT ); Mon, 24 Apr 2017 16:05:35 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.37,245,1488873600"; d="scan'208";a="1123015789" Message-ID: <1493064330.24567.180.camel@linux.intel.com> Subject: Re: [PATCH] iio: adc: Add support for TI ADC1x8s102 From: Andy Shevchenko To: Jan Kiszka , Jonathan Cameron Cc: linux-iio@vger.kernel.org, Linux Kernel Mailing List , Sascha Weisenberger Date: Mon, 24 Apr 2017 23:05:30 +0300 In-Reply-To: <6e0f0b52-27a1-0ce5-c217-3aa941babe63@siemens.com> References: <6e0f0b52-27a1-0ce5-c217-3aa941babe63@siemens.com> Organization: Intel Finland Oy Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.22.6-1 Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, 2017-04-24 at 21:28 +0200, Jan Kiszka wrote: > This is an upstream port of an IIO driver for the TI ADC108S102 and > ADC128S102. The former can be found on the Intel Galileo Gen2 and the > Siemens SIMATIC IOT2000. For those boards, ACPI-based enumeration is > included. > > Original author: Bogdan Pricop > Ported from Intel Galileo Gen2 BSP to Intel Yocto kernel: > Todor Minchev . > +#include > +#include > +#include > + > +#include > +#include > + > +#include > +#include > +#include > +#include > + > +#include Perhaps alphabetical order? > + > +/* 16-bit SPI command format: > + *   [15:14] Ignored > + *   [13:11] 3-bit channel address > + *   [10:0]  Ignored > + */ > +#define ADC1x8S102_CMD(ch) (((ch) << (8)) << (3)) I guess ((u16)(ch) << 11) would be slightly better. > + > +/* > + * 16-bit SPI response format: > + *   [15:12] Zeros > + *   [11:0]  12-bit ADC sample (for ADC108S102, [1:0] will always be > 0). > + */ > +#define ADC1x8S102_RES_DATA(res) (res & ((1 << > ADC1x8S102_BITS) - 1)) GENMASK() and to align with above ((u16)(res) & GENMASK(11, 0)) > + /* SPI message buffers: > +  *  tx_buf: |C0|C1|C2|C3|C4|C5|C6|C7|XX| > +  *  rx_buf: |XX|R0|R1|R2|R3|R4|R5|R6|R7|tt|tt|tt|tt| > +  * > +  *  tx_buf: 8 channel read commands, plus 1 dummy command > +  *  rx_buf: 1 dummy response, 8 channel responses, plus 64- > bit timestamp > +  */ > + __be16 rx_buf[13] > ____cacheline_aligned; > + __be16 tx_buf[9]; Would it be better to have tx_buf with ____cache_aligned? (IIUC it's already by fact of above, though...) > +}; > tatic int adc1x8s102_update_scan_mode(struct iio_dev *indio_dev, > + unsigned long const *active_scan_mask) > +{ > + struct adc1x8s102_state *st; > + int i, j; > + > + st = iio_priv(indio_dev); > + > + /* Fill in the first x shorts of tx_buf with the number of > channels > +  * enabled for sampling by the triggered buffer > +  */ /* * Is it okay style for * multi-line comments? */ > + for (i = 0, j = 0; i < ADC1x8S102_MAX_CHANNELS; i++) { > + if (test_bit(i, active_scan_mask)) { for_each_set_bit() > + st->tx_buf[j] = > cpu_to_be16(ADC1x8S102_CMD(i)); > + j++; > + } > + } > + /* One dummy command added, to clock in the last response */ > + st->tx_buf[j] = 0x00; > +} > + > +static int adc1x8s102_read_raw(struct iio_dev *indio_dev, > +    struct iio_chan_spec const *chan, > +    int *val, > +    int *val2, > +    long m) One line? > +{ > + int ret; > + struct adc1x8s102_state *st; > + > + st = iio_priv(indio_dev); > + > + switch (m) { > + case IIO_CHAN_INFO_RAW: > + mutex_lock(&indio_dev->mlock); > + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) > { > + ret = -EBUSY; > + dev_warn(&st->spi->dev, > +  "indio_dev->currentmode is > INDIO_BUFFER_TRIGGERED\n"); Indentation? > + } else { > + ret = adc1x8s102_scan_direct(st, chan- > >address); > + } > + mutex_unlock(&indio_dev->mlock); > + > + if (ret < 0) > + return ret; > + *val = ADC1x8S102_RES_DATA(ret); > + > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_SCALE: > + switch (chan->type) { > + case IIO_VOLTAGE: > + if (st->reg) > + *val = regulator_get_voltage(st->reg) > / 1000; > + else > + *val = st->ext_vin; > + > + *val2 = chan->scan_type.realbits; > + return IIO_VAL_FRACTIONAL_LOG2; > + default: > + dev_warn(&st->spi->dev, > +  "Invalid channel type %u for channel > %d\n", > +  chan->type, chan->channel); > + return -EINVAL; > + } > + default: > + dev_warn(&st->spi->dev, "Invalid IIO_CHAN_INFO: > %lu\n", m); > + return -EINVAL; > + } > +} > +#ifdef CONFIG_ACPI > +typedef int (*acpi_setup_handler)(struct spi_device *, > +   const struct > adc1x8s102_platform_data **); > + > +static const struct adc1x8s102_platform_data int3495_platform_data = > { > + .ext_vin = 5000, /* 5 V */ > +}; > + > +/* Galileo Gen 2 SPI setup */ > +static int > +adc1x8s102_setup_int3495(struct spi_device *spi, > +  const struct adc1x8s102_platform_data > **pdata) > +{ > + struct pxa2xx_spi_chip *chip_data; This one is too big to waste memory on one member. > + > + chip_data = devm_kzalloc(&spi->dev, sizeof(*chip_data), > GFP_KERNEL); > + if (!chip_data) > + return -ENOMEM; > + > + chip_data->gpio_cs = ADC1x8S102_GALILEO2_CS; > + spi->controller_data = chip_data; > + dev_info(&spi->dev, "setting GPIO CS value to %d\n", > +  chip_data->gpio_cs); > + spi_setup(spi); > + > + *pdata = &int3495_platform_data; > + > + return 0; > +} This is weird approach. Moreover, please do not use platform data at all. > + > +static const struct acpi_device_id adc1x8s102_acpi_ids[] = { > + { "INT3495",  (kernel_ulong_t)&adc1x8s102_setup_int3495 }, > + { } > +}; > +MODULE_DEVICE_TABLE(acpi, adc1x8s102_acpi_ids); > +#endif > + > +static int adc1x8s102_probe(struct spi_device *spi) > +{ > + const struct adc1x8s102_platform_data *pdata = spi- > >dev.platform_data; > + struct adc1x8s102_state *st; > + struct iio_dev *indio_dev; > + int ret; > + > +#ifdef CONFIG_ACPI No. > + if (ACPI_COMPANION(&spi->dev)) { > + acpi_setup_handler setup_handler; > + const struct acpi_device_id *id; > + > + id = acpi_match_device(adc1x8s102_acpi_ids, &spi- > >dev); > + if (!id) > + return -ENODEV; > + > + setup_handler = (acpi_setup_handler)id->driver_data; > + if (setup_handler) { > + ret = setup_handler(spi, &pdata); > + if (ret) > + return ret; > + } No way. > + } > +#endif > + > + if (!pdata) { > + dev_err(&spi->dev, "Cannot get adc1x8s102 platform > data\n"); > + return -ENODEV; > + } > + > +error_cleanup_ring: > + iio_triggered_buffer_cleanup(indio_dev); > +error_disable_reg: > + regulator_disable(st->reg); Does devm_() help to get rid of these? > + > + return ret; > +} > + > +static int adc1x8s102_remove(struct spi_device *spi) > +{ > + struct iio_dev *indio_dev = spi_get_drvdata(spi); > + struct adc1x8s102_state *st = iio_priv(indio_dev); > + > + iio_device_unregister(indio_dev); > + iio_triggered_buffer_cleanup(indio_dev); > + > + regulator_disable(st->reg); Ditto. > + > + return 0; > +} > + > +++ b/include/linux/platform_data/adc1x8s102.h It must be no such file at all! Please, remove it completely. -- Andy Shevchenko Intel Finland Oy