archive mirror
 help / color / mirror / Atom feed
From: Paolo Pisati <>
To: Alan Tull <>,
	Rob Herring <>,
	Mark Rutland <>,
	Moritz Fischer <>
Subject: [PATCH v2 0/2] Lattice MachXO2 Slave SPI FPGA Manager support
Date: Mon,  1 May 2017 15:15:10 +0200	[thread overview]
Message-ID: <> (raw)

Hi all,

this series adds support for the Lattice MachXO2 FPGA chip, programmed
over Slave SPI.

Tested on my raspberry pi3 + bugblat's pif2 fpga hat.

Changes from v1:
* fixed all the warnings pointed out by 'checkpatch --strict' and
  Alan Tull

Paolo Pisati (2):
  dt: bindings: fpga: add lattice machxo2 slave spi binding description
  fpga: lattice machxo2: Add Lattice MachXO2 support

 .../bindings/fpga/lattice-machxo2-spi.txt          |  29 +++
 drivers/fpga/Kconfig                               |   7 +
 drivers/fpga/Makefile                              |   1 +
 drivers/fpga/machxo2-spi.c                         | 214 +++++++++++++++++++++
 4 files changed, 251 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/lattice-machxo2-spi.txt
 create mode 100644 drivers/fpga/machxo2-spi.c


             reply	other threads:[~2017-05-01 13:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-01 13:15 Paolo Pisati [this message]
2017-05-01 13:15 ` [PATCH v2 1/2] dt: bindings: fpga: add lattice machxo2 slave spi binding description Paolo Pisati
2017-05-05 20:25   ` Rob Herring
2017-05-01 13:15 ` [PATCH v2 2/2] fpga: lattice machxo2: Add Lattice MachXO2 support Paolo Pisati
2017-05-01 17:59   ` Moritz Fischer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).