Hi, Le mardi 25 avril 2017 à 10:57 -0600, Stephen Warren a écrit : > On 04/24/2017 12:41 PM, Paul Kocialkowski wrote: > > Le lundi 24 avril 2017 à 09:35 -0600, Stephen Warren a écrit : > > > On 04/24/2017 09:07 AM, Paul Kocialkowski wrote: > > > > Le mercredi 19 avril 2017 à 16:00 -0600, Stephen Warren a écrit : > > > > > On 04/18/2017 10:38 AM, Paul Kocialkowski wrote: > > > > > > Le mardi 18 avril 2017 à 10:15 -0600, Stephen Warren a écrit : > > > > > > > On 04/18/2017 09:11 AM, Paul Kocialkowski wrote: > > > > > > > > This selects the tegra30 i2s and ahub controllers for the > > > > > > > > tegra124 > > > > > > > > SoC. > > > > > > > > These are needed when building without ARCH_TEGRA_3x_SOC set. > > > > > > > > diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig > > > > > > > > index efbe8d4c019e..bcd18d2cf7a7 100644 > > > > > > > > --- a/sound/soc/tegra/Kconfig > > > > > > > > +++ b/sound/soc/tegra/Kconfig > > > > > > > > @@ -46,7 +46,7 @@ config SND_SOC_TEGRA20_SPDIF > > > > > > > > > > > > > > > >  config SND_SOC_TEGRA30_AHUB > > > > > > > >   tristate > > > > > > > > - depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC > > > > > > > > + depends on SND_SOC_TEGRA && (ARCH_TEGRA_3x_SOC || > > > > > > > > ARCH_TEGRA_124_SOC) > > > > > > > > > > > > > > Is this really a compile-time dependency? > > > > > > > > > > > > From a quick look at the code, I doubt this is really a build > > > > > > dependency. > > > > > > > > > > > > > If so, don't we need to add T210 and T186 entries into that || > > > > > > > condition > > > > > > > too, > > > > > > > since we could be building a kernel with just T210/T186 support > > > > > > > and no > > > > > > > T124 > > > > > > > support? > > > > > > > > > > > > In the spirit of this patch, adding entries for other tegra > > > > > > platforms > > > > > > would > > > > > > make > > > > > > sense. Would you prefer that we leave out the dependency from > > > > > > SND_SOC_TEGRA30_* > > > > > > and only select the right I2S driver to use in each codec driver? > > > > > > > > > > > > If not, we'd have to list all relevant platforms both in the > > > > > > I2S/AHUB > > > > > > drivers > > > > > > and in each codec's rules (which is not necessarily and issue, but > > > > > > there's > > > > > > no > > > > > > need to have artificial platform dependencies). > > > > > > > > > > > > What do you think? > > > > > > > > > > I think we should just remove most of these "depends on" since they're > > > > > mostly set up to reflect runtime requirements rather than build time > > > > > requirements. The only points I'd make are: > > > > > > > > I definitely agree we should do that for all the codec Kconfig options. > > > > > > > > > 1) > > > > > > > > > > Everything should "depends on SND_SOC_TEGRA" simply so the options > > > > > don't > > > > > show up and clutter menuconfig menus unless SND_SOC_TEGRA is enabled. > > > > > > > > Agreed. > > > > > > > > > 2) > > > > > > > > > > SND_SOC_TEGRA30_I2S does need the Tegra30 AHUB driver in order to > > > > > compile/link, since it directly calls functions in that driver. This > > > > > is > > > > > already handled by SND_SOC_TEGRA30_I2S doing "select > > > > > SND_SOC_TEGRA30_AHUB". > > > > > > > > Agreed. > > > > > > > > > 3) > > > > > > > > > > The machine drivers all do e.g. "select SND_SOC_TEGRA30_I2S if > > > > > ARCH_TEGRA_3x_SOC". This was an attempt to make the machine drivers > > > > > only > > > > > pull in the relevant drivers for the SoC(s) being compiled for. I'm > > > > > not > > > > > sure this still makes sense; this won't work on kernels that only > > > > > support T124/T210/T186 since ARCH_TEGRA_3x_SOC isn't enabled then. > > > > > Should we just remove all those and make sure the defconfigs are > > > > > updated > > > > > to make sure the relevant I2S/AHUB/SPDIF/AC97 drivers are explicitly > > > > > enabled? Perhaps we should default all the I2S/AHUB/SPDIF/AC97 to y > > > > > (which will only apply if SND_SOC_TEGRA is enabled)? > > > > > > > > I think it would be easier for everyone to just auto-select the machine > > > > drivers > > > > automatically based on the architecture (so we could have the list of > > > > ARCH_TEGRA_*_SOC here) when SND_SOC_TEGRA is selected. > > > > > > I don't think selecting the machine drivers is the correct approach, > > > since then they can't be disabled. > > > > > > Making certain machine drivers "default y if ARCH_TEGRA_nn_SOC" would > > > address that, > > > > That's right, my mistake. Let's take that as the solution I'm backing then. > > > > >  but still isn't very scalable since we need to go back and > > > edit the Kconfig every time we define a new SoC, in order to add that > > > SoC into the default statement. > > > > Well, that's what platform bringup is all about, isn't it? I think it makes > > a > > lot more sense to have to add a new platform once (and it's not like one > > will > > forget to look at the sound part when adding a new platform) rather than > > requiring users to hand-pick the option. > > Personally I'd expect all the Tegra machine drivers to be enabled in the  > upstream defconfig files all the time, such that we don't need to make  > the Kconfig options default y, nor have users manually turn the relevant  > options on, at all. I think I was previously mistaken about what the machine drivers are, so I got a good occasion to find out about them an learn something new. Thanks! Agreed regarding the machine drivers, they should indeed all be enabled in the defconfig by default. > > > > Not only does this preserve existing configs (including external ones > > > > that > > > > aren't part of the kernel tree), it also clearly maps which machine > > > > driver > > > > to use for which SoC instead of having users do it by hand. > > > > > > The machine drivers aren't terribly tied to SoCs by design; most of them > > > would work on pretty much any SoC. They're only tied to SoCs as a > > > side-effect of a machine driver being tied to a certain CODEC, and > > > certain CODECS just by chance are only used (so far) on specific boards, > > > which have specific SoCs. > > > > I'm a bit confused: aren't the machine driver (i2s/ahub/spdif/ac97) tied to > > specific hardware blocks that are found in specific SoCs and not in others? > > I > > can see these blocks haven't evolved much across generations, but they're > > still > > either part of a specific SoC or not, aren't they? > > > > The compatible strings in the common SoC dts seem to indicate that only one > > of > > these blocks is found at a time. > > There are SoC-specific drivers for the components (Tegra20 I2S, Tegra30  > I2S, etc.), but the *machine* drivers generally don't know anything  > about that. DT instantiates the correct component drivers for the SoC,  > and the machine driver just uses whatever it's linked to without caring  > too-much/at-all about whether it's hooked to a Tegra20 I2S or a Tegra30  > I2S device. That makes sense now. Regarding the SoC-specific components, would you agree with auto-selecting those based on ARCH_TEGRA_xx_SOC so that only the required drivers are pulled-in? Otherwise, I'm also fine with explicitely enabling them in the defconfig at this point. Cheers, -- Paul Kocialkowski, developer of free digital technology and hardware support Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/