Le mercredi 24 mai 2017 à 12:55 +0200, Heiko Stuebner a écrit : > Am Sonntag, 7. Mai 2017, 20:00:42 CEST schrieb Paul Kocialkowski: > > Hi, > > > > Le lundi 01 mai 2017 à 08:49 -0700, Doug Anderson a écrit : > > > On Mon, May 1, 2017 at 7:07 AM, Heiko Stuebner wrote: > > > > Am Sonntag, 30. April 2017, 22:56:52 CEST schrieb Paul Kocialkowski: > > > > > Le dimanche 30 avril 2017 à 22:37 +0200, Heiko Stuebner a écrit : > > > > > > Hi Paul, > > > > > > > > > > > > Am Sonntag, 30. April 2017, 20:30:52 CEST schrieb Paul Kocialkowski: > > > > > > > This moves the cros-ec-sbs dtsi to a new rk3288-veyron-chromebook- > > > > > > > sbs > > > > > > > dtsi since it only concerns rk3288 veyron Chromebooks. > > > > > > > > > > > > > > Other Chromebooks (such as the tegra124 nyans) also have sbs > > > > > > > batteries > > > > > > > and don't use this dtsi, that only makes sense when used with > > > > > > > rk3288-veyron-chromebook anyway. > > > > > > > > > > > > That isn't true. The gru series (rk3399-based) also uses the > > > > > > sbs-battery [0]. And while it is currently limited to Rockchip-based > > > > > > Chromebooks it is nevertheless used on more than one platform, so > > > > > > the probability is high that it will be used in future series as > > > > > > well. > > > > > > > > > > That's good to know, but as pointed out, other cros devices are using > > > > > a > > > > > sbs > > > > > battery without this header, so such a generic name isn't really a > > > > > good > > > > > fit. > > > > > > It would be interesting to know if the "retry-count" ought to be the > > > same across all Chromebooks. I guess you could argue that maybe > > > someone found it needed to be 10 in all "nyan" variants and needed to > > > be 1 in all "veyron" variants, but it seems more likely that the > > > difference is arbitrary, or that one of the two values would work for > > > everyone. It sure looks like we've just been copying values from > > > device to device. Given that all the "veyron" devices have vastly > > > different batteries (and probably all the nyan ones too), it seems > > > likely there ought to be one value. > > > > Well, the retry-count is a maximum number of retries to detect a status > > change > > on external power connection/disconnection. From my experience, it seems > > that > > nyans do indeed more retries to detect the change than veyrons, on average. > > > > I don't think setting this value to 1 is very reasonable (in the end, that's > > a > > number of seconds), because power supply status changes tend to take a few > > seconds to reflect on the battery status. > > > > I think setting a high value (like 10) would always work and either way, the > > status detection mechanism stops itself as soon as a change is detected (it > > turns out this is not a good idea for bq27xxx batteries, because they go > > from > > charging to full in the first seconds after AC connection instead of > > directly > > reporting full, when full), but let's assume this is okay for sbs (and maybe > > change it later). > > > > > In terms of setting the "charger", that also could potentially be > > > something that could be for all Chromebooks, or at least older ones > > > that don't have their charger implemented by the type C driver. ...or > > > nyan devices could simply have a line in their dts like: > > > > > > &battery { > > > power-supplies = <&charger>; > > > }; > > > > That's true, but I think it makes as much sense to keep the whole binding. > > > > In my opinion, the only reason to have a separate dtsi for this binding is > > that > > veyrons have another dtsi for chromebooks where this binding should be. > > However, > > it cannot be there because of minnie using another battery IC. > > > > So my approach here would be to make it common for devices where other major > > parts are also common, so we can avoid duplication when most of the device- > > tree > > is already common. In cases where most of the device-tree is specific to a > > device, I think the binding should be duplicated. This is done already for > > lots > > of other components that could be made (somewhat) common anyway. > > > > > > > > > > Note that &charger has to be defined (after my subsequent patches), > > > > > which > > > > > it is > > > > > for devices that also include rk3288-veyron-chromebook, but not > > > > > necessarily > > > > > others. > > > > > > > > > > Overall, I think having one -sbs dtsi file makes sense here because > > > > > there > > > > > is > > > > > already a rk3288-veyron-chromebook dtsi that veyron chromebooks use. > > > > > That > > > > > file > > > > > cannot contain the battery bindings because minnie has a different one > > > > > and > > > > > it > > > > > would be a bit silly to copy it over all devices. That definitely > > > > > makes > > > > > sense. > > > > > > > > > > As for other devices, I don't see why we should have a separate > > > > > include > > > > > file for > > > > > the battery instead of having it in the device's dts. I think this > > > > > should > > > > > be the > > > > > case on gru/kevin. > > > > > > > > > > Also maybe not *all* gru-based devices will turn out to use a SBS > > > > > battery, > > > > > so it > > > > > seems early to include this header in the gru dtsi. > > > > > > For gru devices, we've moved to a "virtual sbs battery" provided by > > > the EC. I'm not 100% positive that everything will just magically > > > work and be converted in the EC if we put a non-sbs battery on a board > > > with this EC feature, but I would hope we'd convert everything > > > properly. > > > > Interesting and good to know! > > > > > > > One last point, gru/kevin > > > > > currently don't define a charger, which will break my subsequent patch > > > > > (that is > > > > > however needed for the veyrons that use this file). > > > > > > Arguably this should be fixed. On veyron-chromebook we just use > > > "gpio-charger". We didn't add a special charger driver w/ a property > > > like "ti,external-control" since the only piece of information that > > > Linux really needed from the charger was whether or not AC was > > > connected. > > > > Thanks for taking that choice, it indeed makes things easier on the kernel > > side > > whith no drawbacks. > > > > > > > > > > To me, it seems that there's little advantage and major drawbacks in > > > > > keeping > > > > > this file the way it is. > > > > > > > > I don't have any set opinion right now but after looking through the > > > > other uses of the sbs-battery the cros-ec-sbs.dtsi snippet really seems > > > > somewhat veyron/gru-specific - especially wrt. the retry-count values. > > > > > > > > What I'm not sure about is whether it is actually better to keep the > > > > include > > > > around under a new name or just move the (rather tiny) sbs-battery node > > > > into the relevant devicetrees directly, when there aren't that many > > > > users > > > > anyway. > > > > > > I'm fine with whatever you guys choose to do here. It's nice not to > > > have copied "code", but with device tree sometimes copies are cleaner > > > than trying to share something. > > > > I definitely agree. I think copies are a good fit here because overall, we > > have > > enough disparity in the possible configurations among different SoC > > platforms to > > justify having one per device. So I believe it would make sense to make that > > binding common *among the same SoC family*. > > ok, so if I'm not mistaken it really looks like moving away from > cros-sbs-battery might be the easiest solution and with seeing the > different usages of the sbs-battery I tend to agree now :-) . > > On the include vs. copy question it looks like we're tied as well with > mickey, minnie (and fievel + tiger from 2017) not using the sbs-battery > having local copies of the sbs-node in the affected devices really looks > like the best option. > > So I guess we should get gru + the sbs veyron-devices their own sbs-battery > and then just drop te cros-ec-sbs.dtsi so that nobody else gets the idea > of using it. How about keeping the nodes for veyron chromebooks (except minnie, which is a convertible anyway) in rk3288-veyron-chromebook-sbs as this patch initially suggested, in addition to changes to gru dts? Cheers! -- Paul Kocialkowski, developer of free digital technology and hardware support Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/