From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751860AbdFGL5C (ORCPT ); Wed, 7 Jun 2017 07:57:02 -0400 Received: from conuserg-10.nifty.com ([210.131.2.77]:42683 "EHLO conuserg-10.nifty.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751642AbdFGLza (ORCPT ); Wed, 7 Jun 2017 07:55:30 -0400 DKIM-Filter: OpenDKIM Filter v2.10.3 conuserg-10.nifty.com v57BqjZa014276 X-Nifty-SrcIP: [153.142.97.92] From: Masahiro Yamada To: linux-mtd@lists.infradead.org Cc: Enrico Jorns , Artem Bityutskiy , Dinh Nguyen , Boris Brezillon , Marek Vasut , David Woodhouse , Masami Hiramatsu , Chuanxiao Dong , Jassi Brar , Masahiro Yamada , Cyrille Pitchen , linux-kernel@vger.kernel.org, Brian Norris , Richard Weinberger Subject: [PATCH v5 11/23] mtd: nand: denali: fix NAND_CMD_STATUS handling Date: Wed, 7 Jun 2017 20:52:20 +0900 Message-Id: <1496836352-8016-12-git-send-email-yamada.masahiro@socionext.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1496836352-8016-1-git-send-email-yamada.masahiro@socionext.com> References: <1496836352-8016-1-git-send-email-yamada.masahiro@socionext.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The current NAND_CMD_STATUS handling is weird; it just reads the WRITE_PROTECT register, and returns NAND_STATUS_WP if it is set. It does not send Read Status (0x70) command, so it is not helpful for checking the current device status. Signed-off-by: Masahiro Yamada --- Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: - Newly added drivers/mtd/nand/denali.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 62798e6d7009..94beab57c145 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -107,21 +107,6 @@ static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte) denali->buf.buf[denali->buf.tail++] = byte; } -/* reads the status of the device */ -static void read_status(struct denali_nand_info *denali) -{ - uint32_t cmd; - - /* initialize the data buffer to store status */ - reset_buf(denali); - - cmd = ioread32(denali->flash_reg + WRITE_PROTECT); - if (cmd) - write_byte_to_buf(denali, NAND_STATUS_WP); - else - write_byte_to_buf(denali, 0); -} - /* Reset the flash controller */ static uint16_t denali_nand_reset(struct denali_nand_info *denali) { @@ -893,7 +878,11 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, switch (cmd) { case NAND_CMD_STATUS: - read_status(denali); + reset_buf(denali); + addr = MODE_11 | BANK(denali->flash_bank); + index_addr(denali, addr | 0, cmd); + index_addr_read_data(denali, addr | 2, &id); + write_byte_to_buf(denali, id); break; case NAND_CMD_READID: case NAND_CMD_PARAM: -- 2.7.4