linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jianhong Chen <chenjh@rock-chips.com>
To: gnurou@gmail.com, linus.walleij@linaro.org, dmitry.torokhov@gmail.com
Cc: linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	huangtao@rock-chips.com, tony.xie@rock-chips.com,
	zhangqing@rock-chips.com, devicetree@vger.kernel.org,
	w.egorov@phytec.de, lgirdwood@gmail.com, broonie@kernel.org,
	robh+dt@kernel.org, mark.rutland@arm.com,
	linux-gpio@vger.kernel.org, linux-input@vger.kernel.org
Subject: [PATCH v6 02/12] mfd: rk808: add rk805 regs addr and ID
Date: Thu,  8 Jun 2017 15:12:29 +0800	[thread overview]
Message-ID: <1496905959-29202-3-git-send-email-chenjh@rock-chips.com> (raw)
In-Reply-To: <1496905959-29202-1-git-send-email-chenjh@rock-chips.com>

From: Elaine Zhang <zhangqing@rock-chips.com>

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 include/linux/mfd/rk808.h | 120 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 120 insertions(+)

diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 54feb14..d315659 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -206,6 +206,97 @@ enum rk818_reg {
 #define RK818_USB_ILMIN_2000MA		0x7
 #define RK818_USB_CHG_SD_VSEL_MASK	0x70
 
+/* RK805 */
+enum rk805_reg {
+	RK805_ID_DCDC1,
+	RK805_ID_DCDC2,
+	RK805_ID_DCDC3,
+	RK805_ID_DCDC4,
+	RK805_ID_LDO1,
+	RK805_ID_LDO2,
+	RK805_ID_LDO3,
+};
+
+/* CONFIG REGISTER */
+#define RK805_VB_MON_REG		0x21
+#define RK805_THERMAL_REG		0x22
+
+/* POWER CHANNELS ENABLE REGISTER */
+#define RK805_DCDC_EN_REG		0x23
+#define RK805_SLP_DCDC_EN_REG		0x25
+#define RK805_SLP_LDO_EN_REG		0x26
+#define RK805_LDO_EN_REG		0x27
+
+/* BUCK AND LDO CONFIG REGISTER */
+#define RK805_BUCK_LDO_SLP_LP_EN_REG	0x2A
+#define RK805_BUCK1_CONFIG_REG		0x2E
+#define RK805_BUCK1_ON_VSEL_REG		0x2F
+#define RK805_BUCK1_SLP_VSEL_REG	0x30
+#define RK805_BUCK2_CONFIG_REG		0x32
+#define RK805_BUCK2_ON_VSEL_REG		0x33
+#define RK805_BUCK2_SLP_VSEL_REG	0x34
+#define RK805_BUCK3_CONFIG_REG		0x36
+#define RK805_BUCK4_CONFIG_REG		0x37
+#define RK805_BUCK4_ON_VSEL_REG		0x38
+#define RK805_BUCK4_SLP_VSEL_REG	0x39
+#define RK805_LDO1_ON_VSEL_REG		0x3B
+#define RK805_LDO1_SLP_VSEL_REG		0x3C
+#define RK805_LDO2_ON_VSEL_REG		0x3D
+#define RK805_LDO2_SLP_VSEL_REG		0x3E
+#define RK805_LDO3_ON_VSEL_REG		0x3F
+#define RK805_LDO3_SLP_VSEL_REG		0x40
+
+/* INTERRUPT REGISTER */
+#define RK805_PWRON_LP_INT_TIME_REG	0x47
+#define RK805_PWRON_DB_REG		0x48
+#define RK805_DEV_CTRL_REG		0x4B
+#define RK805_INT_STS_REG		0x4C
+#define RK805_INT_STS_MSK_REG		0x4D
+#define RK805_GPIO_IO_POL_REG		0x50
+#define RK805_OUT_REG			0x52
+#define RK805_ON_SOURCE_REG		0xAE
+#define RK805_OFF_SOURCE_REG		0xAF
+
+#define RK805_NUM_REGULATORS		7
+
+#define RK805_PWRON_FALL_RISE_INT_EN	0x0
+#define RK805_PWRON_FALL_RISE_INT_MSK	0x81
+
+/* RK805 IRQ Definitions */
+#define RK805_IRQ_PWRON_RISE		0
+#define RK805_IRQ_VB_LOW		1
+#define RK805_IRQ_PWRON			2
+#define RK805_IRQ_PWRON_LP		3
+#define RK805_IRQ_HOTDIE		4
+#define RK805_IRQ_RTC_ALARM		5
+#define RK805_IRQ_RTC_PERIOD		6
+#define RK805_IRQ_PWRON_FALL		7
+
+#define RK805_IRQ_PWRON_RISE_MSK	BIT(0)
+#define RK805_IRQ_VB_LOW_MSK		BIT(1)
+#define RK805_IRQ_PWRON_MSK		BIT(2)
+#define RK805_IRQ_PWRON_LP_MSK		BIT(3)
+#define RK805_IRQ_HOTDIE_MSK		BIT(4)
+#define RK805_IRQ_RTC_ALARM_MSK		BIT(5)
+#define RK805_IRQ_RTC_PERIOD_MSK	BIT(6)
+#define RK805_IRQ_PWRON_FALL_MSK	BIT(7)
+
+#define RK805_PWR_RISE_INT_STATUS	BIT(0)
+#define RK805_VB_LOW_INT_STATUS		BIT(1)
+#define RK805_PWRON_INT_STATUS		BIT(2)
+#define RK805_PWRON_LP_INT_STATUS	BIT(3)
+#define RK805_HOTDIE_INT_STATUS		BIT(4)
+#define RK805_ALARM_INT_STATUS		BIT(5)
+#define RK805_PERIOD_INT_STATUS		BIT(6)
+#define RK805_PWR_FALL_INT_STATUS	BIT(7)
+
+#define RK805_BUCK1_2_ILMAX_MASK	(3 << 6)
+#define RK805_BUCK3_4_ILMAX_MASK        (3 << 3)
+#define RK805_RTC_PERIOD_INT_MASK	(1 << 6)
+#define RK805_RTC_ALARM_INT_MASK	(1 << 5)
+#define RK805_INT_ALARM_EN		(1 << 3)
+#define RK805_INT_TIMER_EN		(1 << 2)
+
 /* RK808 IRQ Definitions */
 #define RK808_IRQ_VOUT_LO	0
 #define RK808_IRQ_VB_LO		1
@@ -298,7 +389,14 @@ enum rk818_reg {
 #define VOUT_LO_INT	BIT(0)
 #define CLK32KOUT2_EN	BIT(0)
 
+#define TEMP115C			0x0c
+#define TEMP_HOTDIE_MSK			0x0c
+#define SLP_SD_MSK			(0x3 << 2)
+#define SHUTDOWN_FUN			(0x2 << 2)
+#define SLEEP_FUN			(0x1 << 2)
 #define RK8XX_ID_MSK			0xfff0
+#define FPWM_MODE			BIT(7)
+
 enum {
 	BUCK_ILMIN_50MA,
 	BUCK_ILMIN_100MA,
@@ -322,6 +420,28 @@ enum {
 };
 
 enum {
+	RK805_BUCK1_2_ILMAX_2500MA,
+	RK805_BUCK1_2_ILMAX_3000MA,
+	RK805_BUCK1_2_ILMAX_3500MA,
+	RK805_BUCK1_2_ILMAX_4000MA,
+};
+
+enum {
+	RK805_BUCK3_ILMAX_1500MA,
+	RK805_BUCK3_ILMAX_2000MA,
+	RK805_BUCK3_ILMAX_2500MA,
+	RK805_BUCK3_ILMAX_3000MA,
+};
+
+enum {
+	RK805_BUCK4_ILMAX_2000MA,
+	RK805_BUCK4_ILMAX_2500MA,
+	RK805_BUCK4_ILMAX_3000MA,
+	RK805_BUCK4_ILMAX_3500MA,
+};
+
+enum {
+	RK805_ID = 0x8050,
 	RK808_ID = 0x0000,
 	RK818_ID = 0x8181,
 };
-- 
1.9.1

  parent reply	other threads:[~2017-06-08  7:14 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-08  7:12 [PATCH v6 00/12] rk808: Add RK805 support Jianhong Chen
2017-06-08  7:12 ` [PATCH v6 01/12] mfd: rk808: fix up the chip id get failed Jianhong Chen
2017-06-08  7:12 ` Jianhong Chen [this message]
2017-06-08  7:12 ` [PATCH v6 03/12] regulator: rk808: Add regulator driver for RK805 Jianhong Chen
2017-06-08 11:11   ` Mark Brown
2017-06-08  7:12 ` [PATCH v6 04/12] mfd: rk808: Add RK805 support Jianhong Chen
2017-06-08  7:27 ` [PATCH v6 05/12] clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 Jianhong Chen
2017-06-08  7:28 ` [PATCH v6 06/12] rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808 Jianhong Chen
2017-06-08  7:28 ` [PATCH v6 07/12] mfd: dt-bindings: Add RK805 device tree bindings document Jianhong Chen
2017-06-08 19:27   ` Rob Herring
2017-06-08  7:30 ` [PATCH v6 08/12] gpio: Add GPIO driver for the RK805 PMIC Jianhong Chen
2017-06-09 11:37   ` Linus Walleij
2017-06-09 12:17     ` Heiko Stuebner
2017-06-14 12:11       ` Jianhong Chen
2017-06-29 10:29         ` Heiko Stübner
2017-07-21  2:00           ` Jianhong Chen
2017-07-21  8:12             ` Heiko Stuebner
2017-06-08  7:30 ` [PATCH v6 09/12] Input: Add power key driver for Rockchip " Jianhong Chen
2017-06-20  3:06   ` Dmitry Torokhov
2017-06-08  7:31 ` [PATCH v6 10/12] mfd: rk808: Add RK805 gpio support Jianhong Chen
2017-06-08  7:32 ` [PATCH v6 11/12] mfd: rk808: Add RK805 power key support Jianhong Chen
2017-06-08  7:33 ` [PATCH v6 12/12] gpio: dt-bindings: add bindings for Rockchip RK805 PMIC Jianhong Chen
2017-06-09 11:30   ` Linus Walleij
2017-06-12 15:58   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1496905959-29202-3-git-send-email-chenjh@rock-chips.com \
    --to=chenjh@rock-chips.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=gnurou@gmail.com \
    --cc=huangtao@rock-chips.com \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony.xie@rock-chips.com \
    --cc=w.egorov@phytec.de \
    --cc=zhangqing@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).