linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jintack Lim <jintack.lim@linaro.org>
To: christoffer.dall@linaro.org, marc.zyngier@arm.com,
	kvmarm@lists.cs.columbia.edu
Cc: jintack@cs.columbia.edu, pbonzini@redhat.com, rkrcmar@redhat.com,
	catalin.marinas@arm.com, will.deacon@arm.com,
	linux@armlinux.org.uk, mark.rutland@arm.com,
	linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Jintack Lim <jintack.lim@linaro.org>
Subject: [RFC PATCH v2 15/31] KVM: arm64: Move system register helper functions around
Date: Mon,  2 Oct 2017 22:10:57 -0500	[thread overview]
Message-ID: <1507000273-3735-13-git-send-email-jintack.lim@linaro.org> (raw)
In-Reply-To: <1507000273-3735-1-git-send-email-jintack.lim@linaro.org>

From: Jintack Lim <jintack@cs.columbia.edu>

We are about to add a framework to handle system instruction traps. To
reuse existing helper functions, let's move them around.

No functional change.

Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
---
 arch/arm64/kvm/sys_regs.c | 89 ++++++++++++++++++++++++-----------------------
 1 file changed, 45 insertions(+), 44 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 395b964..541bb97 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1621,6 +1621,51 @@ static bool access_id_aa64mmfr0_el1(struct kvm_vcpu *v,
 	{ SYS_DESC(SYS_SP_EL2), NULL, reset_special, SP_EL2, 0},
 };
 
+#define reg_to_match_value(x)						\
+	({								\
+		unsigned long val;					\
+		val  = (x)->Op0 << 14;					\
+		val |= (x)->Op1 << 11;					\
+		val |= (x)->CRn << 7;					\
+		val |= (x)->CRm << 3;					\
+		val |= (x)->Op2;					\
+		val;							\
+	 })
+
+static int match_sys_reg(const void *key, const void *elt)
+{
+	const unsigned long pval = (unsigned long)key;
+	const struct sys_reg_desc *r = elt;
+
+	return pval - reg_to_match_value(r);
+}
+
+static const struct sys_reg_desc *find_reg(const struct sys_reg_params *params,
+					 const struct sys_reg_desc table[],
+					 unsigned int num)
+{
+	unsigned long pval = reg_to_match_value(params);
+
+	return bsearch((void *)pval, table, num, sizeof(table[0]),
+		       match_sys_reg);
+}
+
+static void perform_access(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *params,
+			   const struct sys_reg_desc *r)
+{
+	/*
+	 * Not having an accessor means that we have configured a trap
+	 * that we don't know how to handle. This certainly qualifies
+	 * as a gross bug that should be fixed right away.
+	 */
+	BUG_ON(!r->access);
+
+	/* Skip instruction if instructed so */
+	if (likely(r->access(vcpu, params, r)))
+		kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+}
+
 static bool trap_dbgidr(struct kvm_vcpu *vcpu,
 			struct sys_reg_params *p,
 			const struct sys_reg_desc *r)
@@ -1968,56 +2013,12 @@ static const struct sys_reg_desc *get_target_table(unsigned target,
 	}
 }
 
-#define reg_to_match_value(x)						\
-	({								\
-		unsigned long val;					\
-		val  = (x)->Op0 << 14;					\
-		val |= (x)->Op1 << 11;					\
-		val |= (x)->CRn << 7;					\
-		val |= (x)->CRm << 3;					\
-		val |= (x)->Op2;					\
-		val;							\
-	 })
-
-static int match_sys_reg(const void *key, const void *elt)
-{
-	const unsigned long pval = (unsigned long)key;
-	const struct sys_reg_desc *r = elt;
-
-	return pval - reg_to_match_value(r);
-}
-
-static const struct sys_reg_desc *find_reg(const struct sys_reg_params *params,
-					 const struct sys_reg_desc table[],
-					 unsigned int num)
-{
-	unsigned long pval = reg_to_match_value(params);
-
-	return bsearch((void *)pval, table, num, sizeof(table[0]), match_sys_reg);
-}
-
 int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	kvm_inject_undefined(vcpu);
 	return 1;
 }
 
-static void perform_access(struct kvm_vcpu *vcpu,
-			   struct sys_reg_params *params,
-			   const struct sys_reg_desc *r)
-{
-	/*
-	 * Not having an accessor means that we have configured a trap
-	 * that we don't know how to handle. This certainly qualifies
-	 * as a gross bug that should be fixed right away.
-	 */
-	BUG_ON(!r->access);
-
-	/* Skip instruction if instructed so */
-	if (likely(r->access(vcpu, params, r)))
-		kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
-}
-
 /*
  * emulate_cp --  tries to match a sys_reg access in a handling table, and
  *                call the corresponding trap handler.
-- 
1.9.1

  parent reply	other threads:[~2017-10-03  3:16 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-03  3:10 [RFC PATCH v2 03/31] KVM: arm/arm64: Remove unused params in mmu functions Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 04/31] KVM: arm/arm64: Abstract stage-2 MMU state into a separate structure Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 05/31] KVM: arm/arm64: Support mmu for the virtual EL2 execution Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 06/31] KVM: arm64: Invalidate virtual EL2 TLB entries when needed Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 07/31] KVM: arm64: Setup vttbr_el2 on each VM entry Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 08/31] KVM: arm/arm64: Make mmu functions non-static Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 09/31] KVM: arm/arm64: Manage mmus for nested VMs Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 10/31] KVM: arm/arm64: Unmap/flush shadow stage 2 page tables Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 11/31] KVM: arm64: Implement nested Stage-2 page table walk logic Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 12/31] KVM: arm/arm64: Handle shadow stage 2 page faults Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 13/31] KVM: arm/arm64: Move kvm_is_write_fault to header file Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 14/31] KVM: arm/arm64: Forward the guest hypervisor's stage 2 permission faults Jintack Lim
2017-10-03  3:10 ` Jintack Lim [this message]
2017-10-03  3:10 ` [RFC PATCH v2 16/31] KVM: arm64: Introduce sys_reg_desc.forward_trap Jintack Lim
2017-10-03  3:10 ` [RFC PATCH v2 17/31] KVM: arm64: Rework the system instruction emulation framework Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 18/31] KVM: arm64: Enumerate AT and TLBI instructions to emulate Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 19/31] KVM: arm64: Describe AT instruction emulation design Jintack Lim
2017-10-03 17:37   ` James Morse
2017-10-03 21:11     ` Jintack Lim
2017-10-04  9:13       ` Marc Zyngier
2017-10-03  3:11 ` [RFC PATCH v2 20/31] KVM: arm64: Implement AT instruction handling Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 21/31] KVM: arm64: Emulate AT S1E[01] instructions Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 22/31] KVM: arm64: Emulate AT S1E2 instructions Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 23/31] KVM: arm64: Emulate AT S12E[01] instructions Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 24/31] KVM: arm64: Emulate TLBI ALLE2(IS) instruction Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 25/31] KVM: arm64: Emulate TLBI VAE2* instrutions Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 26/31] KVM: arm64: Emulate TLBI ALLE1(IS) Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 27/31] KVM: arm64: Emulate TLBI VMALLS12E1(IS) instruction Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 28/31] KVM: arm64: Emulate TLBI IPAS2E1* instructions Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 29/31] KVM: arm64: Respect the virtual HCR_EL2.AT and NV setting Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 30/31] KVM: arm64: Emulate TLBI instructions accesible from EL1 Jintack Lim
2017-10-03  3:11 ` [RFC PATCH v2 31/31] KVM: arm64: Fixes to toggle_cache for nesting Jintack Lim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1507000273-3735-13-git-send-email-jintack.lim@linaro.org \
    --to=jintack.lim@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=jintack@cs.columbia.edu \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).