From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754148AbdLHOdQ (ORCPT ); Fri, 8 Dec 2017 09:33:16 -0500 Received: from mail01.prevas.se ([62.95.78.3]:54893 "EHLO mail01.prevas.se" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753567AbdLHOdK (ORCPT ); Fri, 8 Dec 2017 09:33:10 -0500 X-IronPort-AV: E=Sophos;i="5.45,377,1508796000"; d="scan'208";a="2933662" From: Rasmus Villemoes To: Thomas Gleixner , Jason Cooper , Marc Zyngier , Rob Herring , Mark Rutland CC: Alexander Stein , Rasmus Villemoes , , Subject: [RFC] irqchip: add support for LS1021A external interrupt lines Date: Fri, 8 Dec 2017 15:33:00 +0100 Message-ID: <1512743580-15358-1-git-send-email-rasmus.villemoes@prevas.dk> X-Mailer: git-send-email 2.7.4 In-Reply-To: <48d2d08c-c57a-ce49-5958-0fd5ad4a2dc7@arm.com> References: <48d2d08c-c57a-ce49-5958-0fd5ad4a2dc7@arm.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [172.16.8.31] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The LS1021A allows inverting the polarity of six interrupt lines IRQ[0:5] via the scfg_intpcr register, effectively allowing IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING for those. We just need to check the type, set the relevant bit in INTPCR accordingly, and fixup the type argument before calling the GIC's irq_set_type. In fact, the power-on-reset value of the INTPCR register is so that all six lines have their polarity inverted. Hence any hardware connected to those lines is unusable without this: If the line is indeed active low, the generic GIC code will reject an irq spec with IRQ_TYPE_LEVEL_LOW, while if the line is active high, we must obviously disable the polarity inversion before unmasking the interrupt. I suspect other layerscape SOCs may have something similar, but I have neither hardware nor documentation. Since we only need to keep a single pointer in the chip_data (the syscon regmap), the code could be a little simpler by dropping the struct extirq_chip_data and just store the regmap directly - but I don't know if I do need to add a lock or something else to the chip_data, so for this RFC I've kept the struct. Signed-off-by: Rasmus Villemoes --- Marc, Alexander, thanks a lot for your hints. This is what I came up with, mostly just copy-pasted from the mtk-sysirq case. I've tested that it works as expected on my board. .../interrupt-controller/fsl,ls1021a-extirq.txt | 19 +++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-ls1021a.c | 157 +++++++++++++++++++++ 3 files changed, 177 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls1021a-extirq.txt create mode 100644 drivers/irqchip/irq-ls1021a.c diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls1021a-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls1021a-extirq.txt new file mode 100644 index 000000000000..53b04b6e1a80 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls1021a-extirq.txt @@ -0,0 +1,19 @@ +* Freescale LS1021A external IRQs + +The LS1021A supports inverting the polarity of six external interrupt lines. + +Required properties: +- compatible: should be "fsl,ls1021a-extirq" +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: Use the same format as specified by GIC in arm,gic.txt. +- interrupt-parent: phandle of GIC. +- syscon: phandle of Supplemental Configuration Unit (scfg). + +Example: + extirq: interrupt-controller@15701ac { + compatible = "fsl,ls1021a-extirq"; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&gic>; + syscon = <&scfg>; + }; diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index b842dfdc903f..d4576dce24b2 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -80,3 +80,4 @@ obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o irq-aspeed-i2c-ic.o obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o obj-$(CONFIG_IRQ_UNIPHIER_AIDET) += irq-uniphier-aidet.o +obj-$(CONFIG_SOC_LS1021A) += irq-ls1021a.o diff --git a/drivers/irqchip/irq-ls1021a.c b/drivers/irqchip/irq-ls1021a.c new file mode 100644 index 000000000000..2ec4fc023549 --- /dev/null +++ b/drivers/irqchip/irq-ls1021a.c @@ -0,0 +1,157 @@ +#define pr_fmt(fmt) "irq-ls1021a: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define INTPCR_REG 0x01ac +#define NIRQ 6 + +struct extirq_chip_data { + struct regmap *syscon; +}; + +static int +ls1021a_extirq_set_type(struct irq_data *data, unsigned int type) +{ + irq_hw_number_t hwirq = data->hwirq; + struct extirq_chip_data *chip_data = data->chip_data; + u32 value, mask; + int ret; + + mask = 1U << (31 - hwirq); + if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_EDGE_FALLING) { + if (type == IRQ_TYPE_LEVEL_LOW) + type = IRQ_TYPE_LEVEL_HIGH; + else + type = IRQ_TYPE_EDGE_RISING; + value = mask; + } else { + value = 0; + } + + /* Don't do the INTPCR_REG update if the parent irq_set_type will EINVAL. */ + if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) + return -EINVAL; + + /* regmap does internal locking, but do we need to provide our + * own across the parent irq_set_type call? */ + regmap_update_bits(chip_data->syscon, INTPCR_REG, mask, value); + + data = data->parent_data; + ret = data->chip->irq_set_type(data, type); + + return ret; +} + +static struct irq_chip extirq_chip = { + .name = "LS1021A_EXTIRQ", + .irq_mask = irq_chip_mask_parent, + .irq_unmask = irq_chip_unmask_parent, + .irq_eoi = irq_chip_eoi_parent, + .irq_set_type = ls1021a_extirq_set_type, + .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_affinity = irq_chip_set_affinity_parent, +}; + +static int +ls1021a_extirq_domain_translate(struct irq_domain *d, struct irq_fwspec *fwspec, + unsigned long *hwirq, unsigned int *type) +{ + if (!is_of_node(fwspec->fwnode)) + return -EINVAL; + + if (fwspec->param_count != 3) + return -EINVAL; + + /* No PPI should point to this domain */ + if (fwspec->param[0] != 0) + return -EINVAL; + + *hwirq = fwspec->param[1]; + *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK; + return 0; +} + +static int +ls1021a_extirq_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *arg) +{ + static const unsigned xlate[NIRQ] = {163,164,165,167,168,169}; + int i; + irq_hw_number_t hwirq; + struct irq_fwspec *fwspec = arg; + struct irq_fwspec gic_fwspec; + + if (fwspec->param_count != 3) + return -EINVAL; + + if (fwspec->param[0]) + return -EINVAL; + + hwirq = fwspec->param[1]; + for (i = 0; i < nr_irqs; i++) + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, + &extirq_chip, + domain->host_data); + + gic_fwspec.fwnode = domain->parent->fwnode; + gic_fwspec.param_count = 3; + gic_fwspec.param[0] = 0; + gic_fwspec.param[1] = xlate[hwirq]; + gic_fwspec.param[2] = fwspec->param[2]; + + return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &gic_fwspec); +} + +static const struct irq_domain_ops extirq_domain_ops = { + .translate = ls1021a_extirq_domain_translate, + .alloc = ls1021a_extirq_domain_alloc, + .free = irq_domain_free_irqs_common, +}; + +static int __init +ls1021a_extirq_of_init(struct device_node *node, struct device_node *parent) +{ + + struct irq_domain *domain, *domain_parent; + struct extirq_chip_data *chip_data; + int ret; + + domain_parent = irq_find_host(parent); + if (!domain_parent) { + pr_err("interrupt-parent not found\n"); + return -EINVAL; + } + + chip_data = kzalloc(sizeof(*chip_data), GFP_KERNEL); + if (!chip_data) + return -ENOMEM; + + chip_data->syscon = syscon_regmap_lookup_by_phandle(node, "syscon"); + if (IS_ERR(chip_data->syscon)) { + ret = PTR_ERR(chip_data->syscon); + goto out_free_chip; + } + + domain = irq_domain_add_hierarchy(domain_parent, 0, NIRQ, node, + &extirq_domain_ops, chip_data); + if (!domain) { + ret = -ENOMEM; + goto out_free_chip; + } + + return 0; + +out_free_chip: + kfree(chip_data); + return ret; +} + +IRQCHIP_DECLARE(ls1021a_extirq, "fsl,ls1021a-extirq", ls1021a_extirq_of_init); -- 2.7.4