From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Philippe Ombredanne <pombredanne@nexb.com>,
Thomas Gleixner <tglx@linutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kate Stewart <kstewart@linuxfoundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Dongdong Liu <liudongdong3@huawei.com>,
Gabriele Paoloni <gabriele.paoloni@huawei.com>,
Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
Sinan Kaya <okaya@codeaurora.org>,
Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v3 3/3] PCI/DPC: Enumerate the devices after DPC trigger event
Date: Mon, 8 Jan 2018 13:25:05 +0530 [thread overview]
Message-ID: <1515398105-10329-4-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1515398105-10329-1-git-send-email-poza@codeaurora.org>
Implement error_resume callback in DPC, which, after DPC trigger event
enumerates the devices beneath.
Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index 68296ec..4c6bef3 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -161,6 +161,43 @@ static void dpc_wait_link_inactive(struct dpc_dev *dpc)
dev_warn(dev, "Link state not disabled for DPC event\n");
}
+static bool dpc_wait_link_active(struct pci_dev *pdev)
+{
+ unsigned long timeout = jiffies + HZ;
+ u16 lnk_status;
+ bool ret = true;
+
+ pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+
+ while (!(lnk_status & PCI_EXP_LNKSTA_DLLLA) &&
+ !time_after(jiffies, timeout)) {
+ msleep(10);
+ pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+ }
+
+ if (!(lnk_status & PCI_EXP_LNKSTA_DLLLA)) {
+ dev_warn(&pdev->dev, "Link state not enabled after DPC event\n");
+ ret = false;
+ }
+
+ return ret;
+}
+
+/**
+ * dpc_error_resume - enumerate the devices beneath
+ * @dev: pointer to Root Port's pci_dev data structure
+ *
+ * Invoked by Port Bus driver during nonfatal recovery.
+ */
+static void dpc_error_resume(struct pci_dev *pdev)
+{
+ if (dpc_wait_link_active(pdev)) {
+ pci_lock_rescan_remove();
+ pci_rescan_bus(pdev->bus);
+ pci_unlock_rescan_remove();
+ }
+}
+
/**
* dpc_reset_link - reset link DPC routine
* @dev: pointer to Root Port's pci_dev data structure
@@ -419,6 +456,7 @@ static void dpc_remove(struct pcie_device *dev)
.service = PCIE_PORT_SERVICE_DPC,
.probe = dpc_probe,
.remove = dpc_remove,
+ .error_resume = dpc_error_resume,
.reset_link = dpc_reset_link,
};
diff --git a/drivers/pci/pcie/pcie-err.c b/drivers/pci/pcie/pcie-err.c
index 858c94c..7d1d20e 100644
--- a/drivers/pci/pcie/pcie-err.c
+++ b/drivers/pci/pcie/pcie-err.c
@@ -238,7 +238,8 @@ pci_ers_result_t pci_reset_link(struct pci_dev *dev, int severity)
pci_ers_result_t pci_broadcast_error_message(struct pci_dev *dev,
enum pci_channel_state state,
char *error_mesg,
- int (*cb)(struct pci_dev *, void *))
+ int (*cb)(struct pci_dev *, void *),
+ int severity)
{
struct pci_err_broadcast_data result_data;
@@ -250,6 +251,15 @@ pci_ers_result_t pci_broadcast_error_message(struct pci_dev *dev,
result_data.result = PCI_ERS_RESULT_RECOVERED;
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ /* If DPC is triggered, call resume error hanlder
+ * because, at this point we can safely assume that
+ * link recovery has happened.
+ */
+ if ((severity == PCI_ERR_DPC_FATAL) &&
+ (cb == pci_report_resume)) {
+ cb(dev, NULL);
+ return PCI_ERS_RESULT_RECOVERED;
+ }
/*
* If the error is reported by a bridge, we think this error
* is related to the downstream link of the bridge, so we
@@ -299,7 +309,8 @@ void pci_do_recovery(struct pci_dev *dev, int severity)
status = pci_broadcast_error_message(dev,
state,
"error_detected",
- pci_report_error_detected);
+ pci_report_error_detected,
+ severity);
if ((severity == PCI_ERR_AER_FATAL) ||
(severity == PCI_ERR_DPC_FATAL)) {
@@ -308,11 +319,15 @@ void pci_do_recovery(struct pci_dev *dev, int severity)
goto failed;
}
+ if (severity == PCI_ERR_DPC_FATAL)
+ goto resume;
+
if (status == PCI_ERS_RESULT_CAN_RECOVER)
status = pci_broadcast_error_message(dev,
state,
"mmio_enabled",
- pci_report_mmio_enabled);
+ pci_report_mmio_enabled,
+ severity);
if (status == PCI_ERS_RESULT_NEED_RESET) {
/*
@@ -323,16 +338,19 @@ void pci_do_recovery(struct pci_dev *dev, int severity)
status = pci_broadcast_error_message(dev,
state,
"slot_reset",
- pci_report_slot_reset);
+ pci_report_slot_reset,
+ severity);
}
if (status != PCI_ERS_RESULT_RECOVERED)
goto failed;
+resume:
pci_broadcast_error_message(dev,
state,
"resume",
- pci_report_resume);
+ pci_report_resume,
+ severity);
dev_info(&dev->dev, "Device recovery successful\n");
mutex_unlock(&pci_err_recovery_lock);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 123ee15..46e2526 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -2010,7 +2010,8 @@ static inline resource_size_t pci_iov_resource_size(struct pci_dev *dev, int res
pci_ers_result_t pci_broadcast_error_message(struct pci_dev *dev,
enum pci_channel_state state,
char *error_mesg,
- int (*cb)(struct pci_dev *, void *));
+ int (*cb)(struct pci_dev *, void *),
+ int severity);
int pci_report_mmio_enabled(struct pci_dev *dev, void *data);
int pci_report_slot_reset(struct pci_dev *dev, void *data);
int pci_report_resume(struct pci_dev *dev, void *data);
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.,
a Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
prev parent reply other threads:[~2018-01-08 7:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-08 7:55 [PATCH v3 0/4] Address error and recovery for AER and DPC Oza Pawandeep
2018-01-08 7:55 ` [PATCH v3 1/3] PCI/AER: factor out error reporting from AER Oza Pawandeep
2018-01-08 12:52 ` Philippe Ombredanne
2018-01-13 0:57 ` Bjorn Helgaas
2018-01-14 5:35 ` poza
2018-01-08 7:55 ` [PATCH v3 2/3] PCI/DPC: Unify and plumb error handling into DPC Oza Pawandeep
2018-01-08 7:55 ` Oza Pawandeep [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515398105-10329-4-git-send-email-poza@codeaurora.org \
--to=poza@codeaurora.org \
--cc=bhelgaas@google.com \
--cc=gabriele.paoloni@huawei.com \
--cc=gregkh@linuxfoundation.org \
--cc=keith.busch@intel.com \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liudongdong3@huawei.com \
--cc=okaya@codeaurora.org \
--cc=pombredanne@nexb.com \
--cc=tglx@linutronix.de \
--cc=timur@codeaurora.org \
--cc=wzhang@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).