From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Philippe Ombredanne <pombredanne@nexb.com>,
Thomas Gleixner <tglx@linutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kate Stewart <kstewart@linuxfoundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Dongdong Liu <liudongdong3@huawei.com>,
Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
Sinan Kaya <okaya@codeaurora.org>,
Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v5 3/4] PCI/DPC: Unify and plumb error handling into DPC
Date: Wed, 17 Jan 2018 16:07:17 +0530 [thread overview]
Message-ID: <1516185438-31556-4-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1516185438-31556-1-git-send-email-poza@codeaurora.org>
Current DPC driver does not do recovery, e.g. calling end-point's driver's
callbacks, which sanitize the sw.
DPC driver implements link_reset callback, and calls pci_do_recovery.
Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index 2d976a6..ed916765 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -13,8 +13,12 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/dpc.h>
#include <linux/pcieport_if.h>
#include "../pci.h"
+#include "portdrv.h"
+
+static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev);
struct rp_pio_header_log_regs {
u32 dw0;
@@ -67,6 +71,60 @@ struct dpc_dev {
"Memory Request Completion Timeout", /* Bit Position 18 */
};
+static int find_dpc_dev_iter(struct device *device, void *data)
+{
+ struct pcie_port_service_driver *service_driver;
+ struct device **dev;
+
+ dev = (struct device **) data;
+
+ if (device->bus == &pcie_port_bus_type && device->driver) {
+ service_driver = to_service_driver(device->driver);
+ if (service_driver->service == PCIE_PORT_SERVICE_DPC) {
+ *dev = device;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static struct device *pci_find_dpc_dev(struct pci_dev *pdev)
+{
+ struct device *dev = NULL;
+
+ device_for_each_child(&pdev->dev, &dev, find_dpc_dev_iter);
+
+ return dev;
+}
+
+static int find_dpc_service_iter(struct device *device, void *data)
+{
+ struct pcie_port_service_driver *service_driver, **drv;
+
+ drv = (struct pcie_port_service_driver **) data;
+
+ if (device->bus == &pcie_port_bus_type && device->driver) {
+ service_driver = to_service_driver(device->driver);
+ if (service_driver->service == PCIE_PORT_SERVICE_DPC) {
+ *drv = service_driver;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+struct pcie_port_service_driver *pci_find_dpc_service(struct pci_dev *dev)
+{
+ struct pcie_port_service_driver *drv = NULL;
+
+ device_for_each_child(&dev->dev, &drv, find_dpc_service_iter);
+
+ return drv;
+}
+EXPORT_SYMBOL(pci_find_dpc_service);
+
static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
{
unsigned long timeout = jiffies + HZ;
@@ -104,11 +162,23 @@ static void dpc_wait_link_inactive(struct dpc_dev *dpc)
dev_warn(dev, "Link state not disabled for DPC event\n");
}
-static void interrupt_event_handler(struct work_struct *work)
+/**
+ * dpc_reset_link - reset link DPC routine
+ * @dev: pointer to Root Port's pci_dev data structure
+ *
+ * Invoked by Port Bus driver when performing link reset at Root Port.
+ */
+static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
{
- struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
- struct pci_dev *dev, *temp, *pdev = dpc->dev->port;
struct pci_bus *parent = pdev->subordinate;
+ struct pci_dev *dev, *temp;
+ struct dpc_dev *dpc;
+ struct pcie_device *pciedev;
+ struct device *devdpc;
+
+ devdpc = pci_find_dpc_dev(pdev);
+ pciedev = to_pcie_device(devdpc);
+ dpc = get_service_data(pciedev);
pci_lock_rescan_remove();
list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
@@ -125,7 +195,7 @@ static void interrupt_event_handler(struct work_struct *work)
dpc_wait_link_inactive(dpc);
if (dpc->rp && dpc_wait_rp_inactive(dpc))
- return;
+ return PCI_ERS_RESULT_DISCONNECT;
if (dpc->rp && dpc->rp_pio_status) {
pci_write_config_dword(pdev,
dpc->cap_pos + PCI_EXP_DPC_RP_PIO_STATUS,
@@ -135,6 +205,17 @@ static void interrupt_event_handler(struct work_struct *work)
pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_STATUS,
PCI_EXP_DPC_STATUS_TRIGGER | PCI_EXP_DPC_STATUS_INTERRUPT);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void interrupt_event_handler(struct work_struct *work)
+{
+ struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
+ struct pci_dev *pdev = dpc->dev->port;
+
+ /* From DPC point of view error is always FATAL. */
+ pci_do_recovery(pdev, DPC_FATAL);
}
static void dpc_rp_pio_print_tlp_header(struct device *dev,
@@ -339,6 +420,7 @@ static void dpc_remove(struct pcie_device *dev)
.service = PCIE_PORT_SERVICE_DPC,
.probe = dpc_probe,
.remove = dpc_remove,
+ .reset_link = dpc_reset_link,
};
static int __init dpc_service_init(void)
diff --git a/drivers/pci/pcie/pcie-err.c b/drivers/pci/pcie/pcie-err.c
index a532fe0..8ce1de1 100644
--- a/drivers/pci/pcie/pcie-err.c
+++ b/drivers/pci/pcie/pcie-err.c
@@ -17,9 +17,12 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/aer.h>
+#include <linux/dpc.h>
#include <linux/pcieport_if.h>
#include "portdrv.h"
+static DEFINE_MUTEX(pci_err_recovery_lock);
+
struct aer_broadcast_data {
enum pci_channel_state state;
enum pci_ers_result result;
@@ -179,7 +182,7 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
return PCI_ERS_RESULT_RECOVERED;
}
-static pci_ers_result_t reset_link(struct pci_dev *dev)
+static pci_ers_result_t reset_link(struct pci_dev *dev, int severity)
{
struct pci_dev *udev;
pci_ers_result_t status;
@@ -193,9 +196,17 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
udev = dev->bus->self;
}
+
+ /* Use the service driver of the component firstly */
+#if IS_ENABLED(CONFIG_PCIE_DPC)
+ if (severity == DPC_FATAL)
+ driver = pci_find_dpc_service(udev);
+#endif
#if IS_ENABLED(CONFIG_PCIEAER)
- /* Use the aer driver of the component firstly */
- driver = pci_find_aer_service(udev);
+ if ((severity == AER_FATAL) ||
+ (severity == AER_NONFATAL) ||
+ (severity == AER_CORRECTABLE))
+ driver = pci_find_aer_service(udev);
#endif
if (driver && driver->reset_link) {
@@ -283,7 +294,10 @@ void pci_do_recovery(struct pci_dev *dev, int severity)
pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
enum pci_channel_state state;
- if (severity == AER_FATAL)
+ mutex_lock(&pci_err_recovery_lock);
+
+ if ((severity == AER_FATAL) ||
+ (severity == DPC_FATAL))
state = pci_channel_io_frozen;
else
state = pci_channel_io_normal;
@@ -293,8 +307,9 @@ void pci_do_recovery(struct pci_dev *dev, int severity)
"error_detected",
report_error_detected);
- if (severity == AER_FATAL) {
- result = reset_link(dev);
+ if ((severity == AER_FATAL) ||
+ (severity == DPC_FATAL)) {
+ result = reset_link(dev, severity);
if (result != PCI_ERS_RESULT_RECOVERED)
goto failed;
}
@@ -326,9 +341,11 @@ void pci_do_recovery(struct pci_dev *dev, int severity)
report_resume);
dev_info(&dev->dev, "Device recovery successful\n");
+ mutex_unlock(&pci_err_recovery_lock);
return;
failed:
/* TODO: Should kernel panic here? */
+ mutex_unlock(&pci_err_recovery_lock);
dev_info(&dev->dev, "Device recovery failed\n");
}
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 4f1992d..b013e24 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -80,4 +80,5 @@ static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask){}
#endif /* !CONFIG_ACPI */
struct pcie_port_service_driver *pci_find_aer_service(struct pci_dev *dev);
+struct pcie_port_service_driver *pci_find_dpc_service(struct pci_dev *dev);
#endif /* _PORTDRV_H_ */
diff --git a/include/linux/dpc.h b/include/linux/dpc.h
new file mode 100644
index 0000000..2019ce4
--- /dev/null
+++ b/include/linux/dpc.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DPC_H_
+#define _DPC_H_
+
+#define DPC_FATAL 4
+
+#endif //_DPC_H_
+
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.,
a Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2018-01-17 10:38 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-17 10:37 [PATCH v5 0/4] Address error and recovery for AER and DPC Oza Pawandeep
2018-01-17 10:37 ` [PATCH v5 1/4] PCI/AER: Rename error recovery to generic pci naming Oza Pawandeep
2018-01-17 10:37 ` [PATCH v5 2/4] PCI/AER: factor out error reporting from AER Oza Pawandeep
2018-01-17 10:37 ` Oza Pawandeep [this message]
2018-01-17 16:45 ` [PATCH v5 3/4] PCI/DPC: Unify and plumb error handling into DPC Sinan Kaya
2018-01-18 5:22 ` poza
2018-01-18 6:04 ` poza
2018-01-17 16:46 ` Sinan Kaya
2018-01-18 5:17 ` poza
2018-01-18 5:57 ` poza
2018-01-18 16:31 ` Sinan Kaya
2018-01-18 18:00 ` poza
2018-01-18 18:03 ` Sinan Kaya
2018-01-19 4:23 ` poza
2018-01-19 4:44 ` Sinan Kaya
2018-01-19 9:03 ` poza
2018-01-17 10:37 ` [PATCH v5 4/4] PCI/DPC: Enumerate the devices after DPC trigger event Oza Pawandeep
2018-01-17 16:27 ` Sinan Kaya
2018-01-18 2:56 ` Keith Busch
2018-01-18 5:32 ` poza
2018-01-18 16:35 ` Sinan Kaya
2018-01-19 1:43 ` Keith Busch
2018-01-19 4:21 ` poza
2018-01-18 5:26 ` poza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516185438-31556-4-git-send-email-poza@codeaurora.org \
--to=poza@codeaurora.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=keith.busch@intel.com \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liudongdong3@huawei.com \
--cc=okaya@codeaurora.org \
--cc=pombredanne@nexb.com \
--cc=tglx@linutronix.de \
--cc=timur@codeaurora.org \
--cc=wzhang@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).