(no subject)

[Fabian Huegel]

We cleaned up a lot of checkpatch errors and warnings in obd_class.h,
but there are still some CHECKs and two warnings about flow control
inside macros left.

Changing those macros to inline functions would probably
be a good idea, unfortunatly it's not straightforward since they use
'#op' to print the name of the operation.

We also did some aligning to make the code more readable and removed
an unnecessary macro.

We only tested, that the kernel still compiles and the lustre kernel
module loads successfully, but given the harmless nature of these
changes we don't expect any problems.

The patches are based on the staging-testing branch of the staging tree.

[PATCH 1/8] staging: lustre: Enclose complex macros in parentheses

[Fabian Huegel]

Checkpatch wants complex macros to be enclosed in parentheses, so we
put parentheses around these four macros.

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index 67c535c..5c8cf30 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -294,10 +294,10 @@ struct obdo;
 
 void obdo_to_ioobj(const struct obdo *oa, struct obd_ioobj *ioobj);
 
-#define OBT(dev)	(dev)->obd_type
-#define OBP(dev, op)    (dev)->obd_type->typ_dt_ops->op
-#define MDP(dev, op)    (dev)->obd_type->typ_md_ops->op
-#define CTXTP(ctxt, op) (ctxt)->loc_logops->lop_##op
+#define OBT(dev)	((dev)->obd_type)
+#define OBP(dev, op)    ((dev)->obd_type->typ_dt_ops->op)
+#define MDP(dev, op)    ((dev)->obd_type->typ_md_ops->op)
+#define CTXTP(ctxt, op) ((ctxt)->loc_logops->lop_##op)
 
 /* Ensure obd_setup: used for cleanup which must be called
  * while obd is stopping
-- 
2.7.4

[PATCH 2/8] staging: lustre: Enclose complex macros in do-while loops

[Fabian Huegel]

Some complex multi-line macros were not enclosed by a do-while(0),
so we fixed that.

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index 5c8cf30..dbe8225 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -332,22 +332,26 @@ static inline int obd_check_dev_active(struct obd_device *obd)
 	 / sizeof(((struct obd_ops *)(0))->iocontrol))
 
 #define OBD_COUNTER_INCREMENT(obdx, op)			   \
+do {							  \
 	if ((obdx)->obd_stats) {				  \
 		unsigned int coffset;			     \
 		coffset = (unsigned int)((obdx)->obd_cntr_base) + \
 			OBD_COUNTER_OFFSET(op);		   \
 		LASSERT(coffset < (obdx)->obd_stats->ls_num);     \
 		lprocfs_counter_incr((obdx)->obd_stats, coffset); \
-	}
+	}							  \
+} while (0)
 
 #define EXP_COUNTER_INCREMENT(export, op)				    \
+do {								\
 	if ((export)->exp_obd->obd_stats) {			  \
 		unsigned int coffset;					\
 		coffset = (unsigned int)((export)->exp_obd->obd_cntr_base) + \
 			OBD_COUNTER_OFFSET(op);			      \
 		LASSERT(coffset < (export)->exp_obd->obd_stats->ls_num);     \
 		lprocfs_counter_incr((export)->exp_obd->obd_stats, coffset); \
-	}
+	}								\
+} while (0)
 
 #define MD_COUNTER_OFFSET(op)				   \
 	((offsetof(struct md_ops, op) -		   \
@@ -355,15 +359,18 @@ static inline int obd_check_dev_active(struct obd_device *obd)
 	 / sizeof(((struct md_ops *)(0))->getstatus))
 
 #define MD_COUNTER_INCREMENT(obdx, op)			   \
+do {						   \
 	if ((obd)->md_stats) {			   \
 		unsigned int coffset;			    \
 		coffset = (unsigned int)((obdx)->md_cntr_base) + \
 			MD_COUNTER_OFFSET(op);		   \
 		LASSERT(coffset < (obdx)->md_stats->ls_num);     \
 		lprocfs_counter_incr((obdx)->md_stats, coffset); \
-	}
+	}							 \
+} while (0)
 
 #define EXP_MD_COUNTER_INCREMENT(export, op)				 \
+do {								\
 	if ((export)->exp_obd->obd_stats) {				  \
 		unsigned int coffset;					\
 		coffset = (unsigned int)((export)->exp_obd->md_cntr_base) +  \
@@ -373,7 +380,8 @@ static inline int obd_check_dev_active(struct obd_device *obd)
 		if ((export)->exp_md_stats)				  \
 			lprocfs_counter_incr(				\
 				(export)->exp_md_stats, coffset);	    \
-	}
+	}								\
+} while (0)
 
 #define EXP_CHECK_MD_OP(exp, op)				\
 do {							    \
-- 
2.7.4

[PATCH 3/8] staging: lustre: Remove DECLARE_LU_VARS macro

[Fabian Huegel]

This macro was only used in four places to declare two variables.
It saved one line of code, but in our opinion hurt readability.
So we removed the macro, substituting every occurrence with the
declaration of the two variables (like the preprocessor would have done).

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index dbe8225..8fc14ed 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -489,14 +489,11 @@ static inline int obd_set_info_async(const struct lu_env *env,
  * obd_precleanup() and obd_cleanup() call both lu_device and obd operations.
  */
 
-#define DECLARE_LU_VARS(ldt, d)		 \
-	struct lu_device_type *ldt;       \
-	struct lu_device *d
-
 static inline int obd_setup(struct obd_device *obd, struct lustre_cfg *cfg)
 {
 	int rc;
-	DECLARE_LU_VARS(ldt, d);
+	struct lu_device_type *ldt;
+	struct lu_device *d;
 
 	ldt = obd->obd_type->typ_lu;
 	if (ldt) {
@@ -534,7 +531,8 @@ static inline int obd_setup(struct obd_device *obd, struct lustre_cfg *cfg)
 static inline int obd_precleanup(struct obd_device *obd)
 {
 	int rc;
-	DECLARE_LU_VARS(ldt, d);
+	struct lu_device_type *ldt;
+	struct lu_device *d;
 
 	rc = obd_check_dev(obd);
 	if (rc)
@@ -560,7 +558,8 @@ static inline int obd_precleanup(struct obd_device *obd)
 static inline int obd_cleanup(struct obd_device *obd)
 {
 	int rc;
-	DECLARE_LU_VARS(ldt, d);
+	struct lu_device_type *ldt;
+	struct lu_device *d;
 
 	rc = obd_check_dev(obd);
 	if (rc)
@@ -608,7 +607,8 @@ static inline int
 obd_process_config(struct obd_device *obd, int datalen, void *data)
 {
 	int rc;
-	DECLARE_LU_VARS(ldt, d);
+	struct lu_device_type *ldt;
+	struct lu_device *d;
 
 	rc = obd_check_dev(obd);
 	if (rc)
-- 
2.7.4

[PATCH 4/8] staging: lustre: Fix comment style

[Fabian Huegel]

Most multi-line comments started on the first line, but the preferred
linux kernel style is to start multi-line comments on the second line.
Some comments became less readable after the change, so we changed them
to single-line comments.

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 47 +++++++++++++----------
 1 file changed, 27 insertions(+), 20 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index 8fc14ed..9a61117 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -40,15 +40,12 @@
 #include <lustre_lib.h>
 #include <lprocfs_status.h>
 
-#define OBD_STATFS_NODELAY      0x0001  /* requests should be send without delay
-					 * and resends for avoid deadlocks
-					 */
-#define OBD_STATFS_FROM_CACHE   0x0002  /* the statfs callback should not update
-					 * obd_osfs_age
-					 */
-#define OBD_STATFS_FOR_MDT0	0x0004	/* The statfs is only for retrieving
-					 * information from MDT0.
-					 */
+/* requests should be send without delay and resends for avoid deadlocks */
+#define OBD_STATFS_NODELAY      0x0001
+/* the statfs callback should not update obd_osfs_age */
+#define OBD_STATFS_FROM_CACHE   0x0002
+/* the statfs is only for retrieving information from MDT0 */
+#define OBD_STATFS_FOR_MDT0	0x0004
 
 /* OBD Device Declarations */
 extern struct obd_device *obd_devs[MAX_OBD_DEVICES];
@@ -137,7 +134,7 @@ int class_config_llog_handler(const struct lu_env *env,
 			      struct llog_rec_hdr *rec, void *data);
 int class_add_uuid(const char *uuid, __u64 nid);
 
-/*obdecho*/
+/* obdecho */
 void lprocfs_echo_init_vars(struct lprocfs_static_vars *lvars);
 
 #define CFG_F_START     0x01   /* Set when we start updating from a log */
@@ -182,7 +179,8 @@ struct config_llog_data {
 	struct obd_export	  *cld_mgcexp;
 	struct mutex		    cld_lock;
 	int			 cld_type;
-	unsigned int		cld_stopping:1, /* we were told to stop
+	unsigned int		cld_stopping:1, /*
+						 * we were told to stop
 						 * watching
 						 */
 				cld_lostlock:1; /* lock not requeued */
@@ -299,7 +297,8 @@ void obdo_to_ioobj(const struct obdo *oa, struct obd_ioobj *ioobj);
 #define MDP(dev, op)    ((dev)->obd_type->typ_md_ops->op)
 #define CTXTP(ctxt, op) ((ctxt)->loc_logops->lop_##op)
 
-/* Ensure obd_setup: used for cleanup which must be called
+/*
+ * Ensure obd_setup: used for cleanup which must be called
  * while obd is stopping
  */
 static inline int obd_check_dev(struct obd_device *obd)
@@ -586,7 +585,8 @@ static inline int obd_cleanup(struct obd_device *obd)
 
 static inline void obd_cleanup_client_import(struct obd_device *obd)
 {
-	/* If we set up but never connected, the
+	/*
+	 * If we set up but never connected, the
 	 * client import will not have been cleaned.
 	 */
 	down_write(&obd->u.cli.cl_sem);
@@ -725,7 +725,8 @@ static inline struct obd_uuid *obd_get_uuid(struct obd_export *exp)
 	return uuid;
 }
 
-/** Create a new /a exp on device /a obd for the uuid /a cluuid
+/*
+ * Create a new /a exp on device /a obd for the uuid /a cluuid
  * @param exp New export handle
  * @param d Connect data, supported flags are set, flags also understood
  *    by obd are returned.
@@ -737,7 +738,8 @@ static inline int obd_connect(const struct lu_env *env,
 			      void *localdata)
 {
 	int rc;
-	__u64 ocf = data ? data->ocd_connect_flags : 0; /* for post-condition
+	__u64 ocf = data ? data->ocd_connect_flags : 0; /*
+							 * for post-condition
 							 * check
 							 */
 
@@ -902,7 +904,8 @@ static inline int obd_destroy_export(struct obd_export *exp)
 	return 0;
 }
 
-/* @max_age is the oldest time in jiffies that we accept using a cached data.
+/*
+ * @max_age is the oldest time in jiffies that we accept using a cached data.
  * If the cache is older than @max_age we will get a new value from the
  * target.  Use a value of "cfs_time_current() + HZ" to guarantee freshness.
  */
@@ -963,7 +966,8 @@ static inline int obd_statfs_rqset(struct obd_export *exp,
 	return rc;
 }
 
-/* @max_age is the oldest time in jiffies that we accept using a cached data.
+/*
+ * @max_age is the oldest time in jiffies that we accept using a cached data.
  * If the cache is older than @max_age we will get a new value from the
  * target.  Use a value of "cfs_time_current() + HZ" to guarantee freshness.
  */
@@ -1126,7 +1130,8 @@ static inline int obd_quotactl(struct obd_export *exp,
 static inline int obd_health_check(const struct lu_env *env,
 				   struct obd_device *obd)
 {
-	/* returns: 0 on healthy
+	/*
+	 * returns: 0 on healthy
 	 *	 >0 on unhealthy + reason code/flag
 	 *	    however the only supported reason == 1 right now
 	 *	    We'll need to define some better reasons
@@ -1499,7 +1504,8 @@ static inline int md_get_fid_from_lsm(struct obd_export *exp,
 	return rc;
 }
 
-/* Unpack an MD struct from disk to in-memory format.
+/*
+ * Unpack an MD struct from disk to in-memory format.
  * Returns +ve size of unpacked MD (0 for free), or -ve error.
  *
  * If *plsm != NULL and lmm == NULL then *lsm will be freed.
@@ -1535,7 +1541,8 @@ struct lwp_register_item {
 	char		    lri_name[MTI_NAME_MAXLEN];
 };
 
-/* I'm as embarrassed about this as you are.
+/*
+ * I'm as embarrassed about this as you are.
  *
  * <shaver> // XXX do not look into _superhack with remaining eye
  * <shaver> // XXX if this were any uglier, I'd get my own show on MTV
-- 
2.7.4

[PATCH 5/8] staging: lustre: Add identifier names to function declarations

[Fabian Huegel]

Checkpatch was complaining about missing identifier names in function
declarations. So we added the missing names according to the names in
the respective function implementation. *obd_import* was sometimes named
*import* and sometimes *imp* (in genops.c), so to avoid confusion we just
named it imp everywhere.

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index 9a61117..d195866 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -52,7 +52,7 @@ extern struct obd_device *obd_devs[MAX_OBD_DEVICES];
 extern rwlock_t obd_dev_lock;
 
 /* OBD Operations Declarations */
-struct obd_device *class_exp2obd(struct obd_export *);
+struct obd_device *class_exp2obd(struct obd_export *exp);
 int class_handle_ioctl(unsigned int cmd, unsigned long arg);
 int lustre_get_jobid(char *jobid);
 
@@ -60,10 +60,10 @@ struct lu_device_type;
 
 /* genops.c */
 extern struct list_head obd_types;
-struct obd_export *class_conn2export(struct lustre_handle *);
-int class_register_type(struct obd_ops *, struct md_ops *,
-			const char *nm, struct lu_device_type *ldt);
-int class_unregister_type(const char *nm);
+struct obd_export *class_conn2export(struct lustre_handle *conn);
+int class_register_type(struct obd_ops *dt_ops, struct md_ops *md_ops,
+			const char *name, struct lu_device_type *ldt);
+int class_unregister_type(const char *name);
 
 struct obd_device *class_newdev(const char *type_name, const char *name);
 void class_release_dev(struct obd_device *obd);
@@ -203,9 +203,11 @@ void class_del_profiles(void);
 
 #if LUSTRE_TRACKS_LOCK_EXP_REFS
 
-void __class_export_add_lock_ref(struct obd_export *, struct ldlm_lock *);
-void __class_export_del_lock_ref(struct obd_export *, struct ldlm_lock *);
-extern void (*class_export_dump_hook)(struct obd_export *);
+void __class_export_add_lock_ref(struct obd_export *exp,
+				 struct ldlm_lock *lock);
+void __class_export_del_lock_ref(struct obd_export *exp,
+				 struct ldlm_lock *lock);
+extern void (*class_export_dump_hook)(struct obd_export *exp);
 
 #else
 
@@ -221,8 +223,8 @@ struct obd_export *class_new_export(struct obd_device *obddev,
 				    struct obd_uuid *cluuid);
 void class_unlink_export(struct obd_export *exp);
 
-struct obd_import *class_import_get(struct obd_import *);
-void class_import_put(struct obd_import *);
+struct obd_import *class_import_get(struct obd_import *imp);
+void class_import_put(struct obd_import *imp);
 struct obd_import *class_new_import(struct obd_device *obd);
 void class_destroy_import(struct obd_import *exp);
 
-- 
2.7.4

[PATCH 6/8] staging: lustre: Fix overlong lines

[Fabian Huegel]

Fixed four lines that went over the 80 character limit
to reduce checkpatch warnings.

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index d195866..06f825b 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -850,7 +850,9 @@ static inline int obd_pool_del(struct obd_device *obd, char *poolname)
 	return rc;
 }
 
-static inline int obd_pool_add(struct obd_device *obd, char *poolname, char *ostname)
+static inline int obd_pool_add(struct obd_device *obd,
+			       char *poolname,
+			       char *ostname)
 {
 	int rc;
 
@@ -861,7 +863,9 @@ static inline int obd_pool_add(struct obd_device *obd, char *poolname, char *ost
 	return rc;
 }
 
-static inline int obd_pool_rem(struct obd_device *obd, char *poolname, char *ostname)
+static inline int obd_pool_rem(struct obd_device *obd,
+			       char *poolname,
+			       char *ostname)
 {
 	int rc;
 
@@ -997,7 +1001,8 @@ static inline int obd_statfs(const struct lu_env *env, struct obd_export *exp,
 			spin_unlock(&obd->obd_osfs_lock);
 		}
 	} else {
-		CDEBUG(D_SUPER, "%s: use %p cache blocks %llu/%llu objects %llu/%llu\n",
+		CDEBUG(D_SUPER,
+		       "%s: use %p cache blocks %llu/%llu objects %llu/%llu\n",
 		       obd->obd_name, &obd->obd_osfs,
 		       obd->obd_osfs.os_bavail, obd->obd_osfs.os_blocks,
 		       obd->obd_osfs.os_ffree, obd->obd_osfs.os_files);
@@ -1579,7 +1584,8 @@ int class_procfs_init(void);
 int class_procfs_clean(void);
 
 /* prng.c */
-#define ll_generate_random_uuid(uuid_out) get_random_bytes(uuid_out, sizeof(class_uuid_t))
+#define ll_generate_random_uuid(uuid_out) \
+	get_random_bytes(uuid_out, sizeof(class_uuid_t))
 
 /* statfs_pack.c */
 struct kstatfs;
-- 
2.7.4

[PATCH 7/8] staging: lustre: Align struct member identifiers

[Fabian Huegel]

This patch properly left aligns all member identifiers in every
struct defined in obd_class.h for better readability.

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 44 +++++++++++------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index 06f825b..99c9a3d 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -145,13 +145,13 @@ void lprocfs_echo_init_vars(struct lprocfs_static_vars *lvars);
 
 /* Passed as data param to class_config_parse_llog */
 struct config_llog_instance {
-	char	       *cfg_obdname;
-	void	       *cfg_instance;
+	char		   *cfg_obdname;
+	void		   *cfg_instance;
 	struct super_block *cfg_sb;
 	struct obd_uuid     cfg_uuid;
 	llog_cb_t	    cfg_callback;
-	int		 cfg_last_idx; /* for partial llog processing */
-	int		 cfg_flags;
+	int		    cfg_last_idx; /* for partial llog processing */
+	int		    cfg_flags;
 };
 
 int class_config_parse_llog(const struct lu_env *env, struct llog_ctxt *ctxt,
@@ -169,31 +169,31 @@ enum {
 
 /* list of active configuration logs  */
 struct config_llog_data {
-	struct ldlm_res_id	  cld_resid;
+	struct ldlm_res_id	    cld_resid;
 	struct config_llog_instance cld_cfg;
-	struct list_head		  cld_list_chain;
-	atomic_t		cld_refcount;
+	struct list_head	    cld_list_chain;
+	atomic_t		    cld_refcount;
 	struct config_llog_data    *cld_sptlrpc;/* depended sptlrpc log */
 	struct config_llog_data	   *cld_params;	/* common parameters log */
 	struct config_llog_data    *cld_recover;/* imperative recover log */
-	struct obd_export	  *cld_mgcexp;
+	struct obd_export	   *cld_mgcexp;
 	struct mutex		    cld_lock;
-	int			 cld_type;
-	unsigned int		cld_stopping:1, /*
-						 * we were told to stop
-						 * watching
-						 */
-				cld_lostlock:1; /* lock not requeued */
-	char			cld_logname[0];
+	int			    cld_type;
+	unsigned int		    cld_stopping:1, /*
+						     * we were told to stop
+						     * watching
+						     */
+				    cld_lostlock:1; /* lock not requeued */
+	char			    cld_logname[0];
 };
 
 struct lustre_profile {
-	struct list_head       lp_list;
-	char	    *lp_profile;
-	char	    *lp_dt;
-	char	    *lp_md;
-	int			lp_refs;
-	bool			lp_list_deleted;
+	struct list_head lp_list;
+	char		*lp_profile;
+	char		*lp_dt;
+	char		*lp_md;
+	int		 lp_refs;
+	bool		 lp_list_deleted;
 };
 
 struct lustre_profile *class_get_profile(const char *prof);
@@ -1544,7 +1544,7 @@ struct lwp_register_item {
 	struct obd_export **lri_exp;
 	register_lwp_cb	    lri_cb_func;
 	void		   *lri_cb_data;
-	struct list_head	    lri_list;
+	struct list_head    lri_list;
 	char		    lri_name[MTI_NAME_MAXLEN];
 };
 
-- 
2.7.4

[PATCH 8/8] staging: lustre: Align backslashes in multi-line macros

[Fabian Huegel]

This patch right aligns all backslashes in multi-line macros
in obd_class.h for better readability.

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 166 +++++++++++-----------
 1 file changed, 83 insertions(+), 83 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index 99c9a3d..6b8027f 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -327,116 +327,116 @@ static inline int obd_check_dev_active(struct obd_device *obd)
 	return rc;
 }
 
-#define OBD_COUNTER_OFFSET(op)				  \
-	((offsetof(struct obd_ops, op) -		  \
-	  offsetof(struct obd_ops, iocontrol))		\
-	 / sizeof(((struct obd_ops *)(0))->iocontrol))
-
-#define OBD_COUNTER_INCREMENT(obdx, op)			   \
-do {							  \
-	if ((obdx)->obd_stats) {				  \
-		unsigned int coffset;			     \
-		coffset = (unsigned int)((obdx)->obd_cntr_base) + \
-			OBD_COUNTER_OFFSET(op);		   \
-		LASSERT(coffset < (obdx)->obd_stats->ls_num);     \
-		lprocfs_counter_incr((obdx)->obd_stats, coffset); \
-	}							  \
+#define OBD_COUNTER_OFFSET(op)					\
+	((offsetof(struct obd_ops, op) -			\
+		offsetof(struct obd_ops, iocontrol))		\
+		/ sizeof(((struct obd_ops *)(0))->iocontrol))
+
+#define OBD_COUNTER_INCREMENT(obdx, op)					\
+do {									\
+	if ((obdx)->obd_stats) {					\
+		unsigned int coffset;					\
+		coffset = (unsigned int)((obdx)->obd_cntr_base) +	\
+			OBD_COUNTER_OFFSET(op);				\
+		LASSERT(coffset < (obdx)->obd_stats->ls_num);		\
+		lprocfs_counter_incr((obdx)->obd_stats, coffset);	\
+	}								\
 } while (0)
 
-#define EXP_COUNTER_INCREMENT(export, op)				    \
-do {								\
-	if ((export)->exp_obd->obd_stats) {			  \
-		unsigned int coffset;					\
+#define EXP_COUNTER_INCREMENT(export, op)				     \
+do {									     \
+	if ((export)->exp_obd->obd_stats) {				     \
+		unsigned int coffset;					     \
 		coffset = (unsigned int)((export)->exp_obd->obd_cntr_base) + \
-			OBD_COUNTER_OFFSET(op);			      \
+			OBD_COUNTER_OFFSET(op);				     \
 		LASSERT(coffset < (export)->exp_obd->obd_stats->ls_num);     \
 		lprocfs_counter_incr((export)->exp_obd->obd_stats, coffset); \
-	}								\
+	}								     \
 } while (0)
 
-#define MD_COUNTER_OFFSET(op)				   \
-	((offsetof(struct md_ops, op) -		   \
-	  offsetof(struct md_ops, getstatus))		 \
-	 / sizeof(((struct md_ops *)(0))->getstatus))
+#define MD_COUNTER_OFFSET(op)					\
+	((offsetof(struct md_ops, op) -				\
+		offsetof(struct md_ops, getstatus))		\
+		/ sizeof(((struct md_ops *)(0))->getstatus))
 
-#define MD_COUNTER_INCREMENT(obdx, op)			   \
-do {						   \
-	if ((obd)->md_stats) {			   \
-		unsigned int coffset;			    \
+#define MD_COUNTER_INCREMENT(obdx, op)				 \
+do {								 \
+	if ((obd)->md_stats) {					 \
+		unsigned int coffset;				 \
 		coffset = (unsigned int)((obdx)->md_cntr_base) + \
-			MD_COUNTER_OFFSET(op);		   \
-		LASSERT(coffset < (obdx)->md_stats->ls_num);     \
+			MD_COUNTER_OFFSET(op);			 \
+		LASSERT(coffset < (obdx)->md_stats->ls_num);	 \
 		lprocfs_counter_incr((obdx)->md_stats, coffset); \
 	}							 \
 } while (0)
 
-#define EXP_MD_COUNTER_INCREMENT(export, op)				 \
-do {								\
-	if ((export)->exp_obd->obd_stats) {				  \
-		unsigned int coffset;					\
-		coffset = (unsigned int)((export)->exp_obd->md_cntr_base) +  \
-			MD_COUNTER_OFFSET(op);			       \
-		LASSERT(coffset < (export)->exp_obd->md_stats->ls_num);      \
-		lprocfs_counter_incr((export)->exp_obd->md_stats, coffset);  \
-		if ((export)->exp_md_stats)				  \
-			lprocfs_counter_incr(				\
+#define EXP_MD_COUNTER_INCREMENT(export, op)				    \
+do {									    \
+	if ((export)->exp_obd->obd_stats) {				    \
+		unsigned int coffset;					    \
+		coffset = (unsigned int)((export)->exp_obd->md_cntr_base) + \
+			MD_COUNTER_OFFSET(op);				    \
+		LASSERT(coffset < (export)->exp_obd->md_stats->ls_num);	    \
+		lprocfs_counter_incr((export)->exp_obd->md_stats, coffset); \
+		if ((export)->exp_md_stats)				    \
+			lprocfs_counter_incr(				    \
 				(export)->exp_md_stats, coffset);	    \
-	}								\
+	}								    \
 } while (0)
 
 #define EXP_CHECK_MD_OP(exp, op)				\
-do {							    \
-	if (!(exp)) {				    \
-		CERROR("obd_" #op ": NULL export\n");	   \
-		return -ENODEV;				\
-	}						       \
-	if (!(exp)->exp_obd || !OBT((exp)->exp_obd)) {   \
+do {								\
+	if (!(exp)) {						\
+		CERROR("obd_" #op ": NULL export\n");		\
+		return -ENODEV;					\
+	}							\
+	if (!(exp)->exp_obd || !OBT((exp)->exp_obd)) {		\
 		CERROR("obd_" #op ": cleaned up obd\n");	\
-		return -EOPNOTSUPP;			    \
-	}						       \
-	if (!OBT((exp)->exp_obd) || !MDP((exp)->exp_obd, op)) { \
+		return -EOPNOTSUPP;				\
+	}							\
+	if (!OBT((exp)->exp_obd) || !MDP((exp)->exp_obd, op)) {	\
 		CERROR("obd_" #op ": dev %s/%d no operation\n", \
-		       (exp)->exp_obd->obd_name,		\
-		       (exp)->exp_obd->obd_minor);	      \
-		return -EOPNOTSUPP;			    \
-	}						       \
+			(exp)->exp_obd->obd_name,		\
+			(exp)->exp_obd->obd_minor);		\
+		return -EOPNOTSUPP;				\
+	}							\
 } while (0)
 
-#define OBD_CHECK_DT_OP(obd, op, err)			   \
-do {							    \
-	if (!OBT(obd) || !OBP((obd), op)) {		     \
-		if (err)					\
-			CERROR("obd_" #op ": dev %d no operation\n",    \
-			       obd->obd_minor);		 \
-		return err;				    \
-	}						       \
+#define OBD_CHECK_DT_OP(obd, op, err)					\
+do {									\
+	if (!OBT(obd) || !OBP((obd), op)) {				\
+		if (err)						\
+			CERROR("obd_" #op ": dev %d no operation\n",	\
+				obd->obd_minor);			\
+		return err;						\
+	}								\
 } while (0)
 
 #define EXP_CHECK_DT_OP(exp, op)				\
-do {							    \
-	if (!(exp)) {				    \
-		CERROR("obd_" #op ": NULL export\n");	   \
-		return -ENODEV;				\
-	}						       \
-	if (!(exp)->exp_obd || !OBT((exp)->exp_obd)) {   \
+do {								\
+	if (!(exp)) {						\
+		CERROR("obd_" #op ": NULL export\n");		\
+		return -ENODEV;					\
+	}							\
+	if (!(exp)->exp_obd || !OBT((exp)->exp_obd)) {		\
 		CERROR("obd_" #op ": cleaned up obd\n");	\
-		return -EOPNOTSUPP;			    \
-	}						       \
-	if (!OBT((exp)->exp_obd) || !OBP((exp)->exp_obd, op)) { \
-		CERROR("obd_" #op ": dev %d no operation\n",    \
-		       (exp)->exp_obd->obd_minor);	      \
-		return -EOPNOTSUPP;			    \
-	}						       \
+		return -EOPNOTSUPP;				\
+	}							\
+	if (!OBT((exp)->exp_obd) || !OBP((exp)->exp_obd, op)) {	\
+		CERROR("obd_" #op ": dev %d no operation\n",	\
+			(exp)->exp_obd->obd_minor);		\
+		return -EOPNOTSUPP;				\
+	}							\
 } while (0)
 
-#define CTXT_CHECK_OP(ctxt, op, err)				 \
-do {								 \
-	if (!OBT(ctxt->loc_obd) || !CTXTP((ctxt), op)) {	     \
-		if (err)					     \
-			CERROR("lop_" #op ": dev %d no operation\n", \
-			       ctxt->loc_obd->obd_minor);	    \
-		return err;					 \
-	}							    \
+#define CTXT_CHECK_OP(ctxt, op, err)					\
+do {									\
+	if (!OBT(ctxt->loc_obd) || !CTXTP((ctxt), op)) {		\
+		if (err)						\
+			CERROR("lop_" #op ": dev %d no operation\n",	\
+				ctxt->loc_obd->obd_minor);		\
+		return err;						\
+	}								\
 } while (0)
 
 static inline int class_devno_max(void)
-- 
2.7.4

Re:

[Ben Evans]

I've been working off and on with this.  Since you're getting into the
counters in a couple of the patches, part of the reason for all the
#defines here are because MDC, MDT and OST counters are all shoved into
the same array dynamically, sometimes.  It would be a much cleaner
approach to have a separate array for the MDC stats, then print them
conditionally.

This would reduce all of the calls to these macros to counter increments.

-Ben Evans

On 1/11/18, 12:16 PM, "Fabian Huegel" <fabian_huegel@web.de> wrote:

>We cleaned up a lot of checkpatch errors and warnings in obd_class.h,
>but there are still some CHECKs and two warnings about flow control
>inside macros left.
>
>Changing those macros to inline functions would probably
>be a good idea, unfortunatly it's not straightforward since they use
>'#op' to print the name of the operation.
>
>We also did some aligning to make the code more readable and removed
>an unnecessary macro.
>
>We only tested, that the kernel still compiles and the lustre kernel
>module loads successfully, but given the harmless nature of these
>changes we don't expect any problems.
>
>The patches are based on the staging-testing branch of the staging tree.
>

Re: [PATCH 1/8] staging: lustre: Enclose complex macros in parentheses

[Greg Kroah-Hartman]

On Thu, Jan 11, 2018 at 06:16:55PM +0100, Fabian Huegel wrote:
> Checkpatch wants complex macros to be enclosed in parentheses, so we
> put parentheses around these four macros.
> 
> Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
> Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
> ---
>  drivers/staging/lustre/lustre/include/obd_class.h | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
> index 67c535c..5c8cf30 100644
> --- a/drivers/staging/lustre/lustre/include/obd_class.h
> +++ b/drivers/staging/lustre/lustre/include/obd_class.h
> @@ -294,10 +294,10 @@ struct obdo;
>  
>  void obdo_to_ioobj(const struct obdo *oa, struct obd_ioobj *ioobj);
>  
> -#define OBT(dev)	(dev)->obd_type
> -#define OBP(dev, op)    (dev)->obd_type->typ_dt_ops->op
> -#define MDP(dev, op)    (dev)->obd_type->typ_md_ops->op
> -#define CTXTP(ctxt, op) (ctxt)->loc_logops->lop_##op
> +#define OBT(dev)	((dev)->obd_type)
> +#define OBP(dev, op)    ((dev)->obd_type->typ_dt_ops->op)
> +#define MDP(dev, op)    ((dev)->obd_type->typ_md_ops->op)
> +#define CTXTP(ctxt, op) ((ctxt)->loc_logops->lop_##op)

That really doesn't make any sense, as this can only be a variable in
here, not any "complex expression".  Sometimes checkpatch.pl isn't very
smart.

Also, these macros are horridly named, odds are they are not even
needed...

thanks,

greg k-h

Re: [PATCH 4/8] staging: lustre: Fix comment style

[Greg Kroah-Hartman]

On Thu, Jan 11, 2018 at 06:16:58PM +0100, Fabian Huegel wrote:
> Most multi-line comments started on the first line, but the preferred
> linux kernel style is to start multi-line comments on the second line.
> Some comments became less readable after the change, so we changed them
> to single-line comments.
> 
> Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
> Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
> ---
>  drivers/staging/lustre/lustre/include/obd_class.h | 47 +++++++++++++----------
>  1 file changed, 27 insertions(+), 20 deletions(-)

This, and another patch, did not apply to my tree, probably because I
didn't take the first one.  Please rebase and resend the remaining ones.

thanks,

greg k-h

staging: lustre: Cleanup of obd_class.h

[Fabian Huegel]

Here are the remaining patches rebased on the current staging-testing.

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 1/2] staging: lustre: Fix comment style

[Fabian Huegel]

Most multi-line comments started on the first line, but the preferred
linux kernel style is to start multi-line comments on the second line.
Some comments became less readable after the change, so we changed them
to single-line comments.

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 47 +++++++++++++----------
 1 file changed, 27 insertions(+), 20 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index 199b593..f517a05 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -40,15 +40,12 @@
 #include <lustre_lib.h>
 #include <lprocfs_status.h>
 
-#define OBD_STATFS_NODELAY      0x0001  /* requests should be send without delay
-					 * and resends for avoid deadlocks
-					 */
-#define OBD_STATFS_FROM_CACHE   0x0002  /* the statfs callback should not update
-					 * obd_osfs_age
-					 */
-#define OBD_STATFS_FOR_MDT0	0x0004	/* The statfs is only for retrieving
-					 * information from MDT0.
-					 */
+/* requests should be send without delay and resends for avoid deadlocks */
+#define OBD_STATFS_NODELAY      0x0001
+/* the statfs callback should not update obd_osfs_age */
+#define OBD_STATFS_FROM_CACHE   0x0002
+/* the statfs is only for retrieving information from MDT0 */
+#define OBD_STATFS_FOR_MDT0	0x0004
 
 /* OBD Device Declarations */
 extern struct obd_device *obd_devs[MAX_OBD_DEVICES];
@@ -137,7 +134,7 @@ int class_config_llog_handler(const struct lu_env *env,
 			      struct llog_rec_hdr *rec, void *data);
 int class_add_uuid(const char *uuid, __u64 nid);
 
-/*obdecho*/
+/* obdecho */
 void lprocfs_echo_init_vars(struct lprocfs_static_vars *lvars);
 
 #define CFG_F_START     0x01   /* Set when we start updating from a log */
@@ -182,7 +179,8 @@ struct config_llog_data {
 	struct obd_export	  *cld_mgcexp;
 	struct mutex		    cld_lock;
 	int			 cld_type;
-	unsigned int		cld_stopping:1, /* we were told to stop
+	unsigned int		cld_stopping:1, /*
+						 * we were told to stop
 						 * watching
 						 */
 				cld_lostlock:1; /* lock not requeued */
@@ -301,7 +299,8 @@ void obdo_to_ioobj(const struct obdo *oa, struct obd_ioobj *ioobj);
 #define MDP(dev, op)    (dev)->obd_type->typ_md_ops->op
 #define CTXTP(ctxt, op) (ctxt)->loc_logops->lop_##op
 
-/* Ensure obd_setup: used for cleanup which must be called
+/*
+ * Ensure obd_setup: used for cleanup which must be called
  * while obd is stopping
  */
 static inline int obd_check_dev(struct obd_device *obd)
@@ -588,7 +587,8 @@ static inline int obd_cleanup(struct obd_device *obd)
 
 static inline void obd_cleanup_client_import(struct obd_device *obd)
 {
-	/* If we set up but never connected, the
+	/*
+	 * If we set up but never connected, the
 	 * client import will not have been cleaned.
 	 */
 	down_write(&obd->u.cli.cl_sem);
@@ -727,7 +727,8 @@ static inline struct obd_uuid *obd_get_uuid(struct obd_export *exp)
 	return uuid;
 }
 
-/** Create a new /a exp on device /a obd for the uuid /a cluuid
+/*
+ * Create a new /a exp on device /a obd for the uuid /a cluuid
  * @param exp New export handle
  * @param d Connect data, supported flags are set, flags also understood
  *    by obd are returned.
@@ -739,7 +740,8 @@ static inline int obd_connect(const struct lu_env *env,
 			      void *localdata)
 {
 	int rc;
-	__u64 ocf = data ? data->ocd_connect_flags : 0; /* for post-condition
+	__u64 ocf = data ? data->ocd_connect_flags : 0; /*
+							 * for post-condition
 							 * check
 							 */
 
@@ -908,7 +910,8 @@ static inline int obd_destroy_export(struct obd_export *exp)
 	return 0;
 }
 
-/* @max_age is the oldest time in jiffies that we accept using a cached data.
+/*
+ * @max_age is the oldest time in jiffies that we accept using a cached data.
  * If the cache is older than @max_age we will get a new value from the
  * target.  Use a value of "cfs_time_current() + HZ" to guarantee freshness.
  */
@@ -969,7 +972,8 @@ static inline int obd_statfs_rqset(struct obd_export *exp,
 	return rc;
 }
 
-/* @max_age is the oldest time in jiffies that we accept using a cached data.
+/*
+ * @max_age is the oldest time in jiffies that we accept using a cached data.
  * If the cache is older than @max_age we will get a new value from the
  * target.  Use a value of "cfs_time_current() + HZ" to guarantee freshness.
  */
@@ -1133,7 +1137,8 @@ static inline int obd_quotactl(struct obd_export *exp,
 static inline int obd_health_check(const struct lu_env *env,
 				   struct obd_device *obd)
 {
-	/* returns: 0 on healthy
+	/*
+	 * returns: 0 on healthy
 	 *	 >0 on unhealthy + reason code/flag
 	 *	    however the only supported reason == 1 right now
 	 *	    We'll need to define some better reasons
@@ -1506,7 +1511,8 @@ static inline int md_get_fid_from_lsm(struct obd_export *exp,
 	return rc;
 }
 
-/* Unpack an MD struct from disk to in-memory format.
+/*
+ * Unpack an MD struct from disk to in-memory format.
  * Returns +ve size of unpacked MD (0 for free), or -ve error.
  *
  * If *plsm != NULL and lmm == NULL then *lsm will be freed.
@@ -1542,7 +1548,8 @@ struct lwp_register_item {
 	char		    lri_name[MTI_NAME_MAXLEN];
 };
 
-/* I'm as embarrassed about this as you are.
+/*
+ * I'm as embarrassed about this as you are.
  *
  * <shaver> // XXX do not look into _superhack with remaining eye
  * <shaver> // XXX if this were any uglier, I'd get my own show on MTV
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH 2/2] staging: lustre: Align struct member identifiers

[Fabian Huegel]

This patch properly left aligns all member identifiers in every
struct defined in obd_class.h for better readability.

Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
---
 drivers/staging/lustre/lustre/include/obd_class.h | 44 +++++++++++------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
index f517a05..531e8dd 100644
--- a/drivers/staging/lustre/lustre/include/obd_class.h
+++ b/drivers/staging/lustre/lustre/include/obd_class.h
@@ -145,13 +145,13 @@ void lprocfs_echo_init_vars(struct lprocfs_static_vars *lvars);
 
 /* Passed as data param to class_config_parse_llog */
 struct config_llog_instance {
-	char	       *cfg_obdname;
-	void	       *cfg_instance;
+	char		   *cfg_obdname;
+	void		   *cfg_instance;
 	struct super_block *cfg_sb;
 	struct obd_uuid     cfg_uuid;
 	llog_cb_t	    cfg_callback;
-	int		 cfg_last_idx; /* for partial llog processing */
-	int		 cfg_flags;
+	int		    cfg_last_idx; /* for partial llog processing */
+	int		    cfg_flags;
 };
 
 int class_config_parse_llog(const struct lu_env *env, struct llog_ctxt *ctxt,
@@ -169,31 +169,31 @@ enum {
 
 /* list of active configuration logs  */
 struct config_llog_data {
-	struct ldlm_res_id	  cld_resid;
+	struct ldlm_res_id	    cld_resid;
 	struct config_llog_instance cld_cfg;
-	struct list_head		  cld_list_chain;
-	atomic_t		cld_refcount;
+	struct list_head	    cld_list_chain;
+	atomic_t		    cld_refcount;
 	struct config_llog_data    *cld_sptlrpc;/* depended sptlrpc log */
 	struct config_llog_data	   *cld_params;	/* common parameters log */
 	struct config_llog_data    *cld_recover;/* imperative recover log */
-	struct obd_export	  *cld_mgcexp;
+	struct obd_export	   *cld_mgcexp;
 	struct mutex		    cld_lock;
-	int			 cld_type;
-	unsigned int		cld_stopping:1, /*
-						 * we were told to stop
-						 * watching
-						 */
-				cld_lostlock:1; /* lock not requeued */
-	char			cld_logname[0];
+	int			    cld_type;
+	unsigned int		    cld_stopping:1, /*
+						     * we were told to stop
+						     * watching
+						     */
+				    cld_lostlock:1; /* lock not requeued */
+	char			    cld_logname[0];
 };
 
 struct lustre_profile {
-	struct list_head       lp_list;
-	char	    *lp_profile;
-	char	    *lp_dt;
-	char	    *lp_md;
-	int			lp_refs;
-	bool			lp_list_deleted;
+	struct list_head lp_list;
+	char		*lp_profile;
+	char		*lp_dt;
+	char		*lp_md;
+	int		 lp_refs;
+	bool		 lp_list_deleted;
 };
 
 struct lustre_profile *class_get_profile(const char *prof);
@@ -1544,7 +1544,7 @@ struct lwp_register_item {
 	struct obd_export **lri_exp;
 	register_lwp_cb	    lri_cb_func;
 	void		   *lri_cb_data;
-	struct list_head	    lri_list;
+	struct list_head    lri_list;
 	char		    lri_name[MTI_NAME_MAXLEN];
 };
 
-- 
2.7.4

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH 6/8] staging: lustre: Fix overlong lines

[Dilger, Andreas]

On Jan 11, 2018, at 10:17, Fabian Huegel <fabian_huegel@web.de> wrote:
> 
> Fixed four lines that went over the 80 character limit
> to reduce checkpatch warnings.
> 
> Signed-off-by: Fabian Huegel <fabian_huegel@web.de>
> Signed-off-by: Christoph Volkert <linux@christoph-volkert.de>
> ---
> drivers/staging/lustre/lustre/include/obd_class.h | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
> index d195866..06f825b 100644
> --- a/drivers/staging/lustre/lustre/include/obd_class.h
> +++ b/drivers/staging/lustre/lustre/include/obd_class.h
> @@ -850,7 +850,9 @@ static inline int obd_pool_del(struct obd_device *obd, char *poolname)
> 	return rc;
> }
> 
> -static inline int obd_pool_add(struct obd_device *obd, char *poolname, char *ostname)
> +static inline int obd_pool_add(struct obd_device *obd,
> +			       char *poolname,
> +			       char *ostname)

This only needs a single field moved onto the next line, like:

+static inline int obd_pool_add(struct obd_device *obd, char *poolname,
+			       char *ostname)


> @@ -861,7 +863,9 @@ static inline int obd_pool_add(struct obd_device *obd, char *poolname, char *ost
> 	return rc;
> }
> 
> -static inline int obd_pool_rem(struct obd_device *obd, char *poolname, char *ostname)
> +static inline int obd_pool_rem(struct obd_device *obd,
> +			       char *poolname,
> +			       char *ostname)

Same.

> @@ -997,7 +1001,8 @@ static inline int obd_statfs(const struct lu_env *env, struct obd_export *exp,
> 			spin_unlock(&obd->obd_osfs_lock);
> 		}
> 	} else {
> -		CDEBUG(D_SUPER, "%s: use %p cache blocks %llu/%llu objects %llu/%llu\n",
> +		CDEBUG(D_SUPER,
> +		       "%s: use %p cache blocks %llu/%llu objects %llu/%llu\n",
> 		       obd->obd_name, &obd->obd_osfs,
> 		       obd->obd_osfs.os_bavail, obd->obd_osfs.os_blocks,
> 		       obd->obd_osfs.os_ffree, obd->obd_osfs.os_files);
> @@ -1579,7 +1584,8 @@ int class_procfs_init(void);
> int class_procfs_clean(void);
> 
> /* prng.c */
> -#define ll_generate_random_uuid(uuid_out) get_random_bytes(uuid_out, sizeof(class_uuid_t))
> +#define ll_generate_random_uuid(uuid_out) \
> +	get_random_bytes(uuid_out, sizeof(class_uuid_t))

This looks like it would be better to replace ll_generate_random_uuid()
callers with generate_random_uuid().

Cheers, Andreas
--
Andreas Dilger
Lustre Principal Architect
Intel Corporation

Re: [PATCH 1/2] staging: lustre: Fix comment style

[Joe Perches]

On Thu, 2018-01-18 at 16:51 +0100, Fabian Huegel wrote:
> Most multi-line comments started on the first line, but the preferred
> linux kernel style is to start multi-line comments on the second line.
> Some comments became less readable after the change, so we changed them
> to single-line comments.
[]
> diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
> 
> @@ -182,7 +179,8 @@ struct config_llog_data {
>  	struct obd_export	  *cld_mgcexp;
>  	struct mutex		    cld_lock;
>  	int			 cld_type;
> -	unsigned int		cld_stopping:1, /* we were told to stop
> +	unsigned int		cld_stopping:1, /*
> +						 * we were told to stop
>  						 * watching
>  						 */
>  				cld_lostlock:1; /* lock not requeued */

probably better for both of these to be bool
instead of bitfield.

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Re: [PATCH 1/2] staging: lustre: Fix comment style

[Greg Kroah-Hartman]

On Fri, Jan 19, 2018 at 05:53:59PM -0800, Joe Perches wrote:
> On Thu, 2018-01-18 at 16:51 +0100, Fabian Huegel wrote:
> > Most multi-line comments started on the first line, but the preferred
> > linux kernel style is to start multi-line comments on the second line.
> > Some comments became less readable after the change, so we changed them
> > to single-line comments.
> []
> > diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h
> > 
> > @@ -182,7 +179,8 @@ struct config_llog_data {
> >  	struct obd_export	  *cld_mgcexp;
> >  	struct mutex		    cld_lock;
> >  	int			 cld_type;
> > -	unsigned int		cld_stopping:1, /* we were told to stop
> > +	unsigned int		cld_stopping:1, /*
> > +						 * we were told to stop
> >  						 * watching
> >  						 */
> >  				cld_lostlock:1; /* lock not requeued */
> 
> probably better for both of these to be bool
> instead of bitfield.

That's a change best left for a separate patch :)

thanks,

greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel