[Outreachy kernel] Re: [PATCH NAND] mtd: nand: Replace printk() with appropriate dev_*macro()

[Shreeya Patel <shreeya.patel23498@gmail.com>]

On Mon, 2018-02-19 at 16:12 +0100, Boris Brezillon wrote:
> On Mon, 19 Feb 2018 18:48:59 +0530
> Shreeya Patel <shreeya.patel23498@gmail.com> wrote:
> 
> > 
> > Replace printks having a log level with the appropriate
> > dev_*macro.
> > Also, use pdev->dev as it is guaranteed in each case to be
> > properly initialized when passed into dev_*macro().
> > 
> > Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
> > ---
> >  drivers/mtd/nand/ams-delta.c | 6 ++++--
> >  drivers/mtd/nand/cafe_nand.c | 5 +++--
> >  drivers/mtd/nand/sh_flctl.c  | 2 +-
> >  3 files changed, 8 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-
> > delta.c
> > index dcec9cf..2419ca8 100644
> > --- a/drivers/mtd/nand/ams-delta.c
> > +++ b/drivers/mtd/nand/ams-delta.c
> > @@ -185,7 +185,8 @@ static int ams_delta_init(struct
> > platform_device *pdev)
> >  	/* Allocate memory for MTD device structure and private
> > data */
> >  	this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
> >  	if (!this) {
> > -		printk (KERN_WARNING "Unable to allocate E3 NAND
> > MTD device structure.\n");
> > +		dev_warn(&pdev->dev,
> > +			 "Unable to allocate E3 NAND MTD device
> > structure.\n");
> >  		err = -ENOMEM;
> >  		goto out;
> >  	}
> > @@ -219,7 +220,8 @@ static int ams_delta_init(struct
> > platform_device *pdev)
> >  		this->dev_ready = ams_delta_nand_ready;
> >  	} else {
> >  		this->dev_ready = NULL;
> > -		printk(KERN_NOTICE "Couldn't request gpio for
> > Delta NAND ready.\n");
> > +		dev_notice(&pdev->dev,
> > +			   "Couldn't request gpio for Delta NAND
> > ready.\n");
> >  	}
> >  	/* 25 us command delay time */
> >  	this->chip_delay = 30;
> > diff --git a/drivers/mtd/nand/cafe_nand.c
> > b/drivers/mtd/nand/cafe_nand.c
> > index bc558c4..51f58ea 100644
> > --- a/drivers/mtd/nand/cafe_nand.c
> > +++ b/drivers/mtd/nand/cafe_nand.c
> > @@ -773,8 +773,9 @@ static int cafe_nand_probe(struct pci_dev
> > *pdev,
> >  		cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
> >  		cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
> >  	} else {
> > -		printk(KERN_WARNING "Unexpected NAND flash
> > writesize %d. Aborting\n",
> > -		       mtd->writesize);
> > +		dev_warn(&cafe->pdev->dev,
> > +			 "Unexpected NAND flash writesize %d.
> > Aborting\n",
> > +			 mtd->writesize);
> >  		goto out_free_dma;
> I see plenty of printk()s (or pr_xxx()s if this patch is applied
> after
> the printk() -> pr_xxx() replacement) that are not converted to
> dev_xxx() in this driver. If we start using dev_xxx() it should be
> used
> consistently.
> 
> How about we convert all printk()s to pr_xxx()s first (what you do in
> your first patch), including those you convert to dev_xxx() here, and
> then we consider patching some of the drivers to use dev_xxx()
> instead
> of pr_xxx().

Yes, this will be better :)
I'll include these changes in my pr_xxx() patch.
Then we will work for dev_xxx().

Thanks

> 
> > 
> >  	}
> >  	cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
> > diff --git a/drivers/mtd/nand/sh_flctl.c
> > b/drivers/mtd/nand/sh_flctl.c
> > index e7f3c98..c534c49 100644
> > --- a/drivers/mtd/nand/sh_flctl.c
> > +++ b/drivers/mtd/nand/sh_flctl.c
> > @@ -877,7 +877,7 @@ static void flctl_cmdfunc(struct mtd_info *mtd,
> > unsigned int command,
> >  			else if (!flctl->seqin_column)
> >  				execmd_write_page_sector(mtd);
> >  			else
> > -				printk(KERN_ERR "Invalid address
> > !?\n");
> > +				dev_err(&flctl->pdev->dev,
> > "Invalid address !?\n");
> >  			break;
> >  		}
> >  		set_cmd_regs(mtd, command, (command << 8) |
> > NAND_CMD_SEQIN);
> 
> 

-- 
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
To post to this group, send email to outreachy-kernel@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1519069191.2102.3.camel%40gmail.com.
For more options, visit https://groups.google.com/d/optout.