linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sricharan R <sricharan@codeaurora.org>
To: viresh.kumar@linaro.org, robh+dt@kernel.org,
	mark.rutland@arm.com, mturquette@baylibre.com,
	sboyd@codeaurora.org, linux@armlinux.org.uk,
	andy.gross@linaro.org, david.brown@linaro.org, rjw@rjwysocki.net,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-pm@vger.kernel.org, robh@kernel.org
Cc: sricharan@codeaurora.org
Subject: [PATCH v7 07/15] clk: qcom: Add IPQ806X's HFPLLs
Date: Mon, 26 Feb 2018 15:23:23 +0530	[thread overview]
Message-ID: <1519638811-17269-8-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1519638811-17269-1-git-send-email-sricharan@codeaurora.org>

From: Stephen Boyd <sboyd@codeaurora.org>

Describe the HFPLLs present on IPQ806X devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/gcc-ipq806x.c | 82 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 28eb200..d571cf8 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -30,6 +30,7 @@
 #include "clk-pll.h"
 #include "clk-rcg.h"
 #include "clk-branch.h"
+#include "clk-hfpll.h"
 #include "reset.h"
 
 static struct clk_pll pll0 = {
@@ -113,6 +114,84 @@
 	},
 };
 
+static struct hfpll_data hfpll0_data = {
+	.mode_reg = 0x3200,
+	.l_reg = 0x3208,
+	.m_reg = 0x320c,
+	.n_reg = 0x3210,
+	.config_reg = 0x3204,
+	.status_reg = 0x321c,
+	.config_val = 0x7845c665,
+	.droop_reg = 0x3214,
+	.droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll0 = {
+	.d = &hfpll0_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll0",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
+};
+
+static struct hfpll_data hfpll1_data = {
+	.mode_reg = 0x3240,
+	.l_reg = 0x3248,
+	.m_reg = 0x324c,
+	.n_reg = 0x3250,
+	.config_reg = 0x3244,
+	.status_reg = 0x325c,
+	.config_val = 0x7845c665,
+	.droop_reg = 0x3314,
+	.droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll1 = {
+	.d = &hfpll1_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll1",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
+};
+
+static struct hfpll_data hfpll_l2_data = {
+	.mode_reg = 0x3300,
+	.l_reg = 0x3308,
+	.m_reg = 0x330c,
+	.n_reg = 0x3310,
+	.config_reg = 0x3304,
+	.status_reg = 0x331c,
+	.config_val = 0x7845c665,
+	.droop_reg = 0x3314,
+	.droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll_l2 = {
+	.d = &hfpll_l2_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll_l2",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
+};
+
 static struct clk_pll pll14 = {
 	.l_reg = 0x31c4,
 	.m_reg = 0x31c8,
@@ -2800,6 +2879,9 @@ enum {
 	[UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
 	[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
 	[NSSTCM_CLK] = &nss_tcm_clk.clkr,
+	[PLL9] = &hfpll0.clkr,
+	[PLL10] = &hfpll1.clkr,
+	[PLL12] = &hfpll_l2.clkr,
 };
 
 static const struct qcom_reset_map gcc_ipq806x_resets[] = {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2018-02-26  9:58 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-26  9:53 [PATCH v7 00/15] Krait clocks + Krait CPUfreq Sricharan R
2018-02-26  9:53 ` [PATCH v7 01/15] ARM: Add Krait L2 register accessor functions Sricharan R
2018-02-26  9:53 ` [PATCH v7 02/15] clk: mux: Split out register accessors for reuse Sricharan R
2018-02-26  9:53 ` [PATCH v7 03/15] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Sricharan R
2018-02-26  9:53 ` [PATCH v7 04/15] clk: qcom: Add HFPLL driver Sricharan R
2018-02-26  9:53 ` [PATCH v7 05/15] dt-bindings: clock: Document qcom,hfpll Sricharan R
2018-02-26  9:53 ` [PATCH v7 06/15] clk: qcom: Add MSM8960/APQ8064's HFPLLs Sricharan R
2018-02-26  9:53 ` Sricharan R [this message]
2018-02-26  9:53 ` [PATCH v7 08/15] clk: qcom: Add support for Krait clocks Sricharan R
2018-02-26  9:53 ` [PATCH v7 09/15] clk: qcom: Add KPSS ACC/GCC driver Sricharan R
2018-02-26  9:53 ` [PATCH v7 10/15] dt-bindings: arm: Document qcom,kpss-gcc Sricharan R
2018-02-26  9:53 ` [PATCH v7 11/15] clk: qcom: Add Krait clock controller driver Sricharan R
2018-02-26  9:53 ` [PATCH v7 12/15] dt-bindings: clock: Document qcom,krait-cc Sricharan R
2018-02-26  9:53 ` [PATCH v7 13/15] clk: qcom: Add safe switch hook for krait mux clocks Sricharan R
2018-02-26  9:53 ` [PATCH v7 14/15] cpufreq: Add module to register cpufreq on Krait CPUs Sricharan R
2018-02-26 10:04   ` Viresh Kumar
2018-02-26 10:15     ` Sricharan R
2018-03-14 16:45       ` Stephen Boyd
2018-02-26  9:53 ` [PATCH v7 15/15] dt-bindings: cpufreq: Document operating-points-v2-krait-cpu Sricharan R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1519638811-17269-8-git-send-email-sricharan@codeaurora.org \
    --to=sricharan@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).