Re: [PATCH] HID: Logitech K290: Add driver for the Logitech K290 USB keyboard

[Florent Flament <contact@florentflament.com>]

On Sat, 2018-03-03 at 18:08 +0200, Andy Shevchenko wrote:
> On Sat, Mar 3, 2018 at 12:04 AM, Florent Flament
> <contact@florentflament.com> wrote:
> > With the generic HID driver, K290 keyboards' F1 to F12 keys send
> > multimedia events by default, and standard keycodes when the
> > function
> > key is pressed. This driver allows to configure K290 keyboards, so
> > that F1 to F12 have a standard behavior and send multimedia events
> > when the function key is pressed. The keyboard mode is set through
> > the
> > fn_mode module parameter: when set to 1 (default setting) the
> > keyboard
> > behaves as with the generic HID driver, when set to 0 the keyboard
> > is
> > configured to work as standard keyboards.
> 
> SPDX ID?
> 
> > +/*
> > + * HID driver for Logitech K290 keyboard
> > + *
> > + * Copyright (c) 2018 Florent Flament
> > + *
> > + * This drivers allows to configure the K290 keyboard's function
> > key
> > + * behaviour (whether function mode is activated or not by
> > default).
> > + *
> > + * Logitech custom commands taken from Marcus Ilgner k290-fnkeyctl
> > + * (https://github.com/milgner/k290-fnkeyctl):
> > + * K290_SET_FUNCTION_CMD
> > + * K290_SET_FUNCTION_VAL
> > + * K290_SET_FUNCTION_OFF
> > + * K290_SET_FUNCTION_ON
> > + *
> > + * Based on hid-accutouch.c and hid-elo.c
> > + *
> > + * This driver is licensed under the terms of GPLv2.
> 
> ...instead of this.

Fine, I'll replace this with the appropriate SPDX ID.

> 
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/hid.h>
> > +#include <linux/module.h>
> > +#include <linux/moduleparam.h>
> > +#include <linux/mod_devicetable.h>
> 
> Do you need these both? I suppose module.h effectively provides them.

Indeed, module.h is enough. The 2 following includes are not necessary.
Fixing this.

> 
> > +#include <linux/stat.h>
> > +#include <linux/types.h>
> > +#include <linux/usb.h>
> 
> 

Regards,
Florent