From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751894AbeCURFc (ORCPT ); Wed, 21 Mar 2018 13:05:32 -0400 Received: from de-out1.bosch-org.com ([139.15.230.186]:58630 "EHLO de-out1.bosch-org.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751609AbeCURFa (ORCPT ); Wed, 21 Mar 2018 13:05:30 -0400 X-AuditID: 0a3aad15-9f3ff70000007ca2-51-5ab290d9fadb From: Mark Jonas To: Dmitry Torokhov , Rob Herring , Mark Rutland CC: , , , , Zhu Yi , Mark Jonas Subject: [PATCH] Input: add bu21029 touch driver Date: Wed, 21 Mar 2018 18:04:34 +0100 Message-ID: <1521651874-15379-1-git-send-email-mark.jonas@de.bosch.com> X-Mailer: git-send-email 2.7.4 MIME-Version: 1.0 Content-Type: text/plain X-Brightmail-Tracker: H4sIAAAAAAAAA21SbUxbVRjm9N62px/XXC5DXqtj2U10Bt0Ax2KzObNsP9Yf/nDxKzYm7mLv aLd+pbcQQI3IHAN0ASXIesfKxxwiqevoFApOx0qVahRnFiPdl0xJ14GSOdxGlDXem8LaH/45 ed/nOc95zvvkxQQTVRuwzenlPU7Ozqq0pHbzp6vXx1tD5hLfsSJjV3RSaRzvTSJj+NKvhDF+ 87bSeH60U2U8/stPCuOBL6PqbWpTwB9AJr8YI00j4mW1KTTQpDIthAqfVZq1T1l4u62K9xQ/ vVtrHTqy3v1jB6q+9fawog5dqWxGGgx0GfR2BVAz0mKG7lBAov2SKt2cRjAf/kGdboYRjB34 UC1LVHQRxGNhQq5X0dVwty+qlC8R9BCCxVN3FDKRR5fAlW++lgQYk/TDMJpaJ8MUvRNCg0mU ti6E+GQTkcZz4VvfDCnXBA1wNpkkWhElZlFiFtWNFAMofw9fUuUofbKsdIOnnBdqS0o3vOZy hFA6xPww6ul5MYJojFg9VVAXMjNKrkqocUTQJqxg86kTVRJ0X7nLUmPlBOurnko7L7AGCuXk 5DB592ChstxhEwSbyxlBgAl2FTW0MGhmKAtXU8t7XGlZBD2ISbaAes/yhpmhKzgvv4/n3bxn hd2CMQvUiRbJMNfDV/DVe2x27wrNrk573p/NZNsqsCaCNmK95L1d2guGEtycQ7BVLMsfSMuZ FTQj/Q69gFOHpxsIXD8tn/O/XZfOqeRcA8GQTpeTNxRQOvlFWtZaK533/mR4iPrrjjRmfhaR eXcWxZGUah7VLU+kl7Y38xugwnmdLzO5y2BG9MRxSUOPFkHsg1PSmvxxBkGoScr038+vIvCH byHou/EPgp/bGwkIHh0jYCr1OwHRkTkCOg+KJFy99hUJfx9tV8JUok8Jvu4bKlhMNKhhJLKo hqnuFgyxaRHDdd8cBn/9TQz9g8c0kPpsXgOHLy5pYOGLFi2IwUYdxAZO6+DCYlQHrYcSOuh/ v0EPZz4O6EE8f1s/K0WtkKLe5zspR+3lvP8T9TKamc5Qh9qUr5d514z0frTfQk5ubtTxu3v+ dPn32s+J9ftr3OFgoLpVNS02p+quFfe+9aaNTbw71rntleG1h+af2dU/Y967Nnjk0dqljrbn t25fWveYYrzr7NzGdw4+Xnh34pPZyy9taet/bsfWHZsKLibGzw2EZ9ZMOsr6gljvvlA8MXFy 5/D3j7CkYOVKiwiPwP0HDOkpfVcEAAA= Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Zhu Yi Add the ROHM BU21029 resistive touch panel controller support with i2c interface. Signed-off-by: Zhu Yi Signed-off-by: Mark Jonas Reviewed-by: Heiko Schocher --- .../bindings/input/touchscreen/bu21029.txt | 30 ++ drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/bu21029_ts.c | 456 +++++++++++++++++++++ 4 files changed, 499 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/bu21029.txt create mode 100644 drivers/input/touchscreen/bu21029_ts.c diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt new file mode 100644 index 0000000..7b61602 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/bu21029.txt @@ -0,0 +1,30 @@ +* Rohm BU21029 Touch Screen Controller + +Required properties: + - compatible : must be "rohm,bu21029" + - reg : i2c device address of the chip + - interrupt-parent : the phandle for the gpio controller + - interrupts : (gpio) interrupt to which the chip is connected + - reset-gpios : gpio pin to reset the chip + - rohm,x-plate-ohms : x-plate resistance in ohms + +Optional properties: + - touchscreen-max-pressure: maximum pressure value + +Example: + + &i2c1 { + /* ... */ + + bu21029: bu21029@40 { + compatible = "rohm,bu21029"; + reg = <0x40>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; + rohm,x-plate-ohms = <600>; + touchscreen-max-pressure = <4095>; + }; + + /* ... */ + }; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 4f15496..e09fe8f 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -151,6 +151,18 @@ config TOUCHSCREEN_BU21013 To compile this driver as a module, choose M here: the module will be called bu21013_ts. +config TOUCHSCREEN_BU21029 + tristate "Rohm BU21029 based touch panel controllers" + depends on I2C + help + Say Y here if you have a Rohm BU21029 touchscreen controller + connected to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called bu21029_ts. + config TOUCHSCREEN_CHIPONE_ICN8318 tristate "chipone icn8318 touchscreen controller" depends on GPIOLIB || COMPILE_TEST diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index dddae79..f50624c 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o +obj-$(CONFIG_TOUCHSCREEN_BU21029) += bu21029_ts.o obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o diff --git a/drivers/input/touchscreen/bu21029_ts.c b/drivers/input/touchscreen/bu21029_ts.c new file mode 100644 index 0000000..d5cbf11 --- /dev/null +++ b/drivers/input/touchscreen/bu21029_ts.c @@ -0,0 +1,456 @@ +/* + * Rohm BU21029 touchscreen controller driver + * + * Copyright (C) 2015 Bosch Sicherheitssysteme GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* HW_ID1 Register (PAGE=0, ADDR=0x0E, Reset value=0x02, Read only) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | HW_IDH | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * HW_ID2 Register (PAGE=0, ADDR=0x0F, Reset value=0x29, Read only) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | HW_IDL | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * HW_IDH: high 8bits of IC's ID + * HW_IDL: low 8bits of IC's ID + */ +#define BU21029_HWID_REG (0x0E << 3) +#define SUPPORTED_HWID 0x0229 + +/* CFR0 Register (PAGE=0, ADDR=0x00, Reset value=0x20) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | 0 | 0 | CALIB | INTRM | 0 | 0 | 0 | 0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * CALIB: 0 = not to use calibration result (*) + * 1 = use calibration result + * INTRM: 0 = INT output depend on "pen down" (*) + * 1 = INT output always "0" + */ +#define BU21029_CFR0_REG (0x00 << 3) +#define CFR0_VALUE 0x00 + +/* CFR1 Register (PAGE=0, ADDR=0x01, Reset value=0xA6) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | MAV | AVE[2:0] | 0 | SMPL[2:0] | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * MAV: 0 = median average filter off + * 1 = median average filter on (*) + * AVE: AVE+1 = number of average samples for MAV, + * if AVE>SMPL, then AVE=SMPL (=3) + * SMPL: SMPL+1 = number of conversion samples for MAV (=7) + */ +#define BU21029_CFR1_REG (0x01 << 3) +#define CFR1_VALUE 0xA6 + +/* CFR2 Register (PAGE=0, ADDR=0x02, Reset value=0x04) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | INTVL_TIME[3:0] | TIME_ST_ADC[3:0] | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * INTVL_TIME: waiting time between completion of conversion + * and start of next conversion, only usable in + * autoscan mode (=20.480ms) + * TIME_ST_ADC: waiting time between application of voltage + * to panel and start of A/D conversion (=100us) + */ +#define BU21029_CFR2_REG (0x02 << 3) +#define CFR2_VALUE 0xC9 + +/* CFR3 Register (PAGE=0, ADDR=0x0B, Reset value=0x72) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | RM8 | STRETCH| PU90K | DUAL | PIDAC_OFS[3:0] | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * RM8: 0 = coordinate resolution is 12bit (*) + * 1 = coordinate resolution is 8bit + * STRETCH: 0 = SCL_STRETCH function off + * 1 = SCL_STRETCH function on (*) + * PU90K: 0 = internal pull-up resistance for touch detection is ~50kohms (*) + * 1 = internal pull-up resistance for touch detection is ~90kohms + * DUAL: 0 = dual touch detection off (*) + * 1 = dual touch detection on + * PIDAC_OFS: dual touch detection circuit adjustment, it is not necessary + * to change this from initial value + */ +#define BU21029_CFR3_REG (0x0B << 3) +#define CFR3_VALUE 0x42 + +/* LDO Register (PAGE=0, ADDR=0x0C, Reset value=0x00) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | 0 | PVDD[2:0] | 0 | AVDD[2:0] | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * PVDD: output voltage of panel output regulator (=2.000V) + * AVDD: output voltage of analog circuit regulator (=2.000V) + */ +#define BU21029_LDO_REG (0x0C << 3) +#define LDO_VALUE 0x77 + +/* Serial Interface Command Byte 1 (CID=1) + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * | 1 | CF | CMSK | PDM | STP | + * +--------+--------+--------+--------+--------+--------+--------+--------+ + * CF: conversion function, see table 3 in datasheet p6 (=0000, automatic scan) + * CMSK: 0 = executes convert function (*) + * 1 = reads the convert result + * PDM: 0 = power down after convert function stops (*) + * 1 = keep power on after convert function stops + * STP: 1 = abort current conversion and power down, set to "0" automatically + */ +#define BU21029_AUTOSCAN 0x80 + +/* The timeout value needs to be larger than INTVL_TIME + tConv4 (sample and + * conversion time), where tConv4 is calculated by formula: + * tPON + tDLY1 + (tTIME_ST_ADC + (tADC * tSMPL) * 2 + tDLY2) * 3 + * see figure 8 in datasheet p15 for details of each field. + */ +#define PEN_UP_TIMEOUT msecs_to_jiffies(50) + +#define STOP_DELAY_US 50L +#define START_DELAY_MS 2L +#define BUF_LEN 8L +#define SCALE_12BIT (1 << 12) +#define MAX_12BIT ((1 << 12) - 1) +#define DRIVER_NAME "bu21029" + +struct bu21029_ts_data { + struct i2c_client *client; + struct input_dev *in_dev; + struct timer_list timer; + u32 reset_gpios; + u32 reset_gpios_assert; + u32 x_plate_ohms; + u32 max_pressure; +}; + +static int bu21029_touch_report(struct bu21029_ts_data *bu21029) +{ + struct i2c_client *i2c = bu21029->client; + u8 buf[BUF_LEN]; + u16 x, y, z1, z2; + u32 rz; + + /* read touch data and deassert INT (by restarting the autoscan mode) */ + int error = i2c_smbus_read_i2c_block_data(i2c, + BU21029_AUTOSCAN, + BUF_LEN, + buf); + if (error < 0) + return error; + + /* compose upper 8 and lower 4 bits into a 12bit value: + * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ + * | ByteH | ByteL | + * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ + * |b07|b06|b05|b04|b03|b02|b01|b00|b07|b06|b05|b04|b03|b02|b01|b00| + * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ + * |v11|v10|v09|v08|v07|v06|v05|v04|v03|v02|v01|v00| 0 | 0 | 0 | 0 | + * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ + */ + x = (buf[0] << 4) | (buf[1] >> 4); + y = (buf[2] << 4) | (buf[3] >> 4); + z1 = (buf[4] << 4) | (buf[5] >> 4); + z2 = (buf[6] << 4) | (buf[7] >> 4); + + if (z1 == 0 || z2 == 0) + return 0; + + /* calculate Rz (pressure resistance value) by equation: + * Rz = Rx * (x/Q) * ((z2/z1) - 1), where + * Rx is x-plate resistance, + * Q is the touch screen resolution (8bit = 256, 12bit = 4096) + * x, z1, z2 are the measured positions. + */ + rz = z2 - z1; + rz *= x; + rz *= bu21029->x_plate_ohms; + rz /= z1; + rz = DIV_ROUND_CLOSEST(rz, SCALE_12BIT); + if (rz <= bu21029->max_pressure) { + input_report_abs(bu21029->in_dev, ABS_X, x); + input_report_abs(bu21029->in_dev, ABS_Y, y); + input_report_abs(bu21029->in_dev, ABS_PRESSURE, rz); + input_report_key(bu21029->in_dev, BTN_TOUCH, 1); + input_sync(bu21029->in_dev); + } + + return 0; +} + +static void bu21029_touch_release(struct timer_list *t) +{ + struct bu21029_ts_data *bu21029 = from_timer(bu21029, t, timer); + + input_report_abs(bu21029->in_dev, ABS_PRESSURE, 0); + input_report_key(bu21029->in_dev, BTN_TOUCH, 0); + input_sync(bu21029->in_dev); +} + +static irqreturn_t bu21029_touch_soft_irq(int irq, void *data) +{ + struct bu21029_ts_data *bu21029 = data; + struct i2c_client *i2c = bu21029->client; + + /* report touch and deassert interrupt (will assert again after + * INTVL_TIME + tConv4 for continuous touch) + */ + int error = bu21029_touch_report(bu21029); + + if (error) { + dev_err(&i2c->dev, "failed to report (error: %d)\n", error); + return IRQ_NONE; + } + + /* reset timer for pen up detection */ + mod_timer(&bu21029->timer, jiffies + PEN_UP_TIMEOUT); + + return IRQ_HANDLED; +} + +static void bu21029_reset_chip(struct bu21029_ts_data *bu21029) +{ + gpio_set_value(bu21029->reset_gpios, + bu21029->reset_gpios_assert); + udelay(STOP_DELAY_US); + gpio_set_value(bu21029->reset_gpios, + !bu21029->reset_gpios_assert); + mdelay(START_DELAY_MS); +} + +static int bu21029_init_chip(struct bu21029_ts_data *bu21029) +{ + struct i2c_client *i2c = bu21029->client; + struct { + u8 reg; + u8 value; + } init_table[] = { + {BU21029_CFR0_REG, CFR0_VALUE}, + {BU21029_CFR1_REG, CFR1_VALUE}, + {BU21029_CFR2_REG, CFR2_VALUE}, + {BU21029_CFR3_REG, CFR3_VALUE}, + {BU21029_LDO_REG, LDO_VALUE} + }; + int error, i; + u16 hwid; + + bu21029_reset_chip(bu21029); + + error = i2c_smbus_read_i2c_block_data(i2c, + BU21029_HWID_REG, + 2, + (u8 *)&hwid); + if (error < 0) { + dev_err(&i2c->dev, "failed to read HW ID\n"); + return error; + } + + if (cpu_to_be16(hwid) != SUPPORTED_HWID) { + dev_err(&i2c->dev, "unsupported HW ID 0x%x\n", hwid); + return -ENODEV; + } + + for (i = 0; i < ARRAY_SIZE(init_table); ++i) { + error = i2c_smbus_write_byte_data(i2c, + init_table[i].reg, + init_table[i].value); + if (error < 0) { + dev_err(&i2c->dev, + "failed to write 0x%x to register 0x%x\n", + init_table[i].value, + init_table[i].reg); + return error; + } + } + + error = i2c_smbus_write_byte(i2c, BU21029_AUTOSCAN); + if (error < 0) { + dev_err(&i2c->dev, "failed to start autoscan\n"); + return error; + } + + return 0; +} + +static int bu21029_parse_dt(struct bu21029_ts_data *bu21029) +{ + struct device *dev = &bu21029->client->dev; + struct device_node *np = dev->of_node; + enum of_gpio_flags flags; + u32 val32; + int gpio; + + if (!np) { + dev_err(dev, "no device tree data\n"); + return -EINVAL; + } + + gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags); + if (!gpio_is_valid(gpio)) { + dev_err(dev, "invalid 'reset-gpios' supplied\n"); + return -EINVAL; + } + bu21029->reset_gpios = gpio; + bu21029->reset_gpios_assert = (flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1; + + if (of_property_read_u32(np, "rohm,x-plate-ohms", &val32)) { + dev_err(dev, "invalid 'x-plate-ohms' supplied\n"); + return -EINVAL; + } + bu21029->x_plate_ohms = val32; + + if (of_property_read_u32(np, "touchscreen-max-pressure", &val32)) + bu21029->max_pressure = MAX_12BIT; + else + bu21029->max_pressure = val32; + + return 0; +} + +static int bu21029_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct bu21029_ts_data *bu21029; + struct input_dev *in_dev; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA | + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + dev_err(&client->dev, + "i2c functionality support is not sufficient\n"); + return -EIO; + } + + bu21029 = devm_kzalloc(&client->dev, sizeof(*bu21029), GFP_KERNEL); + if (!bu21029) + return -ENOMEM; + + in_dev = devm_input_allocate_device(&client->dev); + if (!in_dev) { + dev_err(&client->dev, "unable to allocate input device\n"); + return -ENOMEM; + } + + bu21029->client = client; + bu21029->in_dev = in_dev; + timer_setup(&bu21029->timer, bu21029_touch_release, 0); + + error = bu21029_parse_dt(bu21029); + if (error) + return error; + + error = devm_gpio_request_one(&client->dev, + bu21029->reset_gpios, + GPIOF_OUT_INIT_HIGH, + DRIVER_NAME); + if (error) { + dev_err(&client->dev, "unable to request reset-gpios\n"); + return error; + } + + error = bu21029_init_chip(bu21029); + if (error) { + dev_err(&client->dev, "unable to config bu21029\n"); + return error; + } + + in_dev->name = DRIVER_NAME; + in_dev->id.bustype = BUS_I2C; + in_dev->dev.parent = &client->dev; + + __set_bit(EV_SYN, in_dev->evbit); + __set_bit(EV_KEY, in_dev->evbit); + __set_bit(EV_ABS, in_dev->evbit); + __set_bit(ABS_X, in_dev->absbit); + __set_bit(ABS_Y, in_dev->absbit); + __set_bit(ABS_PRESSURE, in_dev->absbit); + __set_bit(BTN_TOUCH, in_dev->keybit); + + input_set_abs_params(in_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(in_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_abs_params(in_dev, ABS_PRESSURE, + 0, bu21029->max_pressure, 0, 0); + input_set_drvdata(in_dev, bu21029); + + error = input_register_device(in_dev); + if (error) { + dev_err(&client->dev, "unable to register input device\n"); + return error; + } + + i2c_set_clientdata(client, bu21029); + + error = devm_request_threaded_irq(&client->dev, + client->irq, + NULL, + bu21029_touch_soft_irq, + IRQF_ONESHOT, + DRIVER_NAME, + bu21029); + if (error) { + dev_err(&client->dev, "unable to request touch irq\n"); + return error; + } + + return 0; +} + +static int bu21029_remove(struct i2c_client *client) +{ + struct bu21029_ts_data *bu21029 = i2c_get_clientdata(client); + + del_timer_sync(&bu21029->timer); + + return 0; +} + +static const struct i2c_device_id bu21029_ids[] = { + {DRIVER_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, bu21029_ids); + +static struct i2c_driver bu21029_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .id_table = bu21029_ids, + .probe = bu21029_probe, + .remove = bu21029_remove, +}; +module_i2c_driver(bu21029_driver); + +MODULE_AUTHOR("Zhu Yi "); +MODULE_DESCRIPTION("Rohm BU21029 touchscreen controller driver"); +MODULE_LICENSE("GPL v2"); -- 2.7.4