From: Sricharan R <sricharan@codeaurora.org>
To: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com,
linux@armlinux.org.uk, andy.gross@linaro.org,
david.brown@linaro.org, catalin.marinas@arm.com,
will.deacon@arm.com, sboyd@codeaurora.org,
bjorn.andersson@linaro.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
absahu@codeaurora.org, marc.zyngier@arm.com,
richardcochran@gmail.com
Cc: sricharan@codeaurora.org
Subject: [PATCH v5 13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board
Date: Fri, 23 Mar 2018 15:48:56 +0530 [thread overview]
Message-ID: <1521800336-19266-14-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1521800336-19266-1-git-send-email-sricharan@codeaurora.org>
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++++++++++++++++++++++++
1 file changed, 103 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6a838b5..dbca7ec 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -21,6 +21,7 @@
aliases {
serial0 = &blsp1_uart5;
+ serial1 = &serial_blsp2;
};
chosen {
@@ -41,6 +42,47 @@
bias-disable;
};
};
+
+ i2c_0_pins: i2c_0_pinmux {
+ mux {
+ pins = "gpio42", "gpio43";
+ function = "blsp1_i2c";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pins {
+ mux {
+ pins = "gpio38", "gpio39", "gpio40", "gpio41";
+ function = "blsp0_spi";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ hsuart_pins: hsuart_pins {
+ mux {
+ pins = "gpio46", "gpio47", "gpio48", "gpio49";
+ function = "blsp2_uart";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ qpic_pins: qpic_pins {
+ mux {
+ pins = "gpio1", "gpio3", "gpio4",
+ "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17";
+ function = "qpic";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
};
serial@78b3000 {
@@ -48,5 +90,66 @@
pinctrl-names = "default";
status = "ok";
};
+
+ spi@78b5000 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a11", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+ };
+
+ serial@78b1000 {
+ pinctrl-0 = <&hsuart_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ i2c@78b6000 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ dma@7984000 {
+ status = "ok";
+ };
+
+ nand@79b0000 {
+ pinctrl-0 = <&qpic_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+ };
+
+ phy@86000 {
+ status = "ok";
+ };
+
+ phy@8e000 {
+ status = "ok";
+ };
+
+ pci@20000000 {
+ status = "ok";
+ perst-gpio = <&tlmm 58 0x1>;
+ };
+
+ pci@10000000 {
+ status = "ok";
+ perst-gpio = <&tlmm 61 0x1>;
+ };
};
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2018-03-23 10:21 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-23 10:18 [PATCH v5 00/13] ARM: dts: ipq: updates to enable a few peripherals Sricharan R
2018-03-23 10:18 ` [PATCH v5 01/13] firmware: qcom: scm: Add ipq4019 soc compatible Sricharan R
2018-03-27 16:56 ` Bjorn Andersson
2018-03-23 10:18 ` [PATCH v5 02/13] ARM: dts: ipq4019: Add a default chosen node Sricharan R
2018-03-27 16:56 ` Bjorn Andersson
2018-03-23 10:18 ` [PATCH v5 03/13] ARM: dts: ipq4019: Add a few peripheral nodes Sricharan R
2018-03-27 16:50 ` Bjorn Andersson
2018-04-02 5:27 ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 04/13] ARM: dts: ipq4019: Change the max opp frequency Sricharan R
2018-03-23 10:18 ` [PATCH v5 05/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi Sricharan R
2018-03-27 17:04 ` Bjorn Andersson
2018-04-02 5:28 ` Sricharan R
2018-04-18 6:59 ` [v5,05/13] " Sven Eckelmann
2018-04-18 7:07 ` Sven Eckelmann
2018-04-18 7:15 ` Sricharan R
2018-04-18 7:38 ` Sven Eckelmann
2018-04-18 8:39 ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 06/13] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file Sricharan R
2018-03-27 17:12 ` Bjorn Andersson
2018-04-02 5:34 ` Sricharan R
2018-04-02 6:30 ` Varadarajan Narayanan
2018-03-23 10:18 ` [PATCH v5 07/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 " Sricharan R
2018-03-27 17:14 ` Bjorn Andersson
2018-04-02 6:07 ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 08/13] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data Sricharan R
2018-03-27 17:20 ` Bjorn Andersson
2018-04-02 6:09 ` Sricharan R
2018-04-18 6:59 ` [v5,08/13] " Sven Eckelmann
2018-04-18 7:12 ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 09/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file Sricharan R
2018-03-27 17:22 ` Bjorn Andersson
2018-04-02 6:10 ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 10/13] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 " Sricharan R
2018-03-27 17:29 ` Bjorn Andersson
2018-04-02 6:12 ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 11/13] ARM: dts: ipq8074: Add peripheral nodes Sricharan R
2018-03-27 17:45 ` Bjorn Andersson
2018-04-02 6:34 ` Sricharan R
2018-03-23 10:18 ` [PATCH v5 12/13] ARM: dts: ipq8074: Add pcie nodes Sricharan R
2018-03-27 17:46 ` Bjorn Andersson
2018-04-02 6:35 ` Sricharan R
2018-03-23 10:18 ` Sricharan R [this message]
2018-03-27 17:49 ` [PATCH v5 13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board Bjorn Andersson
2018-04-02 6:36 ` Sricharan R
2018-03-24 2:17 ` [PATCH v5 00/13] ARM: dts: ipq: updates to enable a few peripherals Richard Cochran
2018-03-24 6:12 ` sricharan
2018-03-24 17:16 ` Richard Cochran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521800336-19266-14-git-send-email-sricharan@codeaurora.org \
--to=sricharan@codeaurora.org \
--cc=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).