From: Matheus Castello <matheus@castello.eng.br>
To: robh+dt@kernel.org, mark.rutland@arm.com
Cc: wens@csie.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
Matheus Castello <matheus@castello.eng.br>
Subject: [PATCH] dt-bindings: pinctrl: sunxi: Fix reference to driver
Date: Wed, 11 Apr 2018 01:17:03 -0400 [thread overview]
Message-ID: <1523423823-9115-1-git-send-email-matheus@castello.eng.br> (raw)
Bindings describe hardware, not drivers.
Use reference to hardware Allwinner A1X Pin Controller instead driver.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
.../devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index ed5eb54..c854cf0 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -56,9 +56,9 @@ pins it needs, and how they should be configured, with regard to muxer
configuration, drive strength and pullups. If one of these options is
not set, its actual value will be unspecified.
-This driver supports the generic pin multiplexing and configuration
-bindings. For details on each properties, you can refer to
-./pinctrl-bindings.txt.
+Allwinner A1X Pin Controller supports the generic pin multiplexing and
+configuration bindings. For details on each properties, you can refer to
+ ./pinctrl-bindings.txt.
Required sub-node properties:
- pins
--
2.7.4
next reply other threads:[~2018-04-11 5:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-11 5:17 Matheus Castello [this message]
2018-04-16 15:07 ` [PATCH] dt-bindings: pinctrl: sunxi: Fix reference to driver Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1523423823-9115-1-git-send-email-matheus@castello.eng.br \
--to=matheus@castello.eng.br \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).