From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753943AbeDROkw (ORCPT ); Wed, 18 Apr 2018 10:40:52 -0400 Received: from relay6-d.mail.gandi.net ([217.70.183.198]:57137 "EHLO relay6-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753868AbeDROkv (ORCPT ); Wed, 18 Apr 2018 10:40:51 -0400 X-Originating-IP: 2.224.242.101 From: Jacopo Mondi To: architt@codeaurora.org, a.hajda@samsung.com, Laurent.pinchart@ideasonboard.com, airlied@linux.ie, vladimir_zapolskiy@mentor.com, horms@verge.net.au, magnus.damm@gmail.com, geert@linux-m68k.org, niklas.soderlund@ragnatech.se, sergei.shtylyov@cogentembedded.com, robh+dt@kernel.org, mark.rutland@arm.com Cc: Jacopo Mondi , dri-devel@lists.freedesktop.org, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v9 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Date: Wed, 18 Apr 2018 16:40:27 +0200 Message-Id: <1524062429-325-1-git-send-email-jacopo+renesas@jmondi.org> X-Mailer: git-send-email 2.7.4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org As I have another series which is based on this one + Eagle board display support, I'm re-sending this one to fix the small issue I pointed out in my reply to v8. Simon: no changes to Eagle DTS series, so the last one sent is still the good one. DRM: I have collected several reviewed-by tags both on driver and bindings. Can I send out incremental patches on this series and consider this one to be ready to be collected? Thanks j v8 -> v9: - Put 'remote' OF node after usage not just in error path during device tree parsing routine - Add Rob's Reviewed-by tag to the device tree bindings documentation v7 -> b8: - Make 'vcc' supply mandatory - Use 'oe' property name to describe "OE" pin - Minor fixes as suggested by Laurent on bindings and driver v6 -> v7: - Use semi-standard names for powerdown and output enable GPIOs as suggested by Rob and Vladimir - Use 'regulator_get()' not the optional version, and list only 'vcc' as requested supply - Addressed Laurent's review comments and removed Eagle display enablement patch to be sent separately v5 -> v6: - Drop check for CONFIG_OF as it is a Kconfig dependency - Add Niklas Reviewed-by tags - List [3/3] depenencies below commit message to ease integration v4 -> v5: - Fix punctuation in bindings documentation - Add small statement to bindings document to clarify the chip has no control bus - Print regulator name in enable/disable routines error path - Add Andrzej Reviewed-by tag v3 -> v4: - Rename permutations of "pdwn" to just "pdwn" everywhere in the series - Improve power enable/disable routines as suggested by Andrzej and Sergei - Change "pdwn" gpio initialization to use the logical output level - Change Kconfig description v2 -> v3: - Drop support for "lvds-decoder" and make the driver THC63LVD1024 specific -- Rework bindings to describe multiple input/output ports -- Rename driver and remove "lvds-decoder" references -- Rework Eagle DTS to use new bindings v1 -> v2: - Drop support for THC63LVD1024 Jacopo Mondi (2): dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder drm: bridge: Add thc63lvd1024 LVDS decoder driver .../bindings/display/bridge/thine,thc63lvd1024.txt | 60 ++++++ drivers/gpu/drm/bridge/Kconfig | 6 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/thc63lvd1024.c | 205 +++++++++++++++++++++ 4 files changed, 272 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c -- 2.7.4