linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Dongdong Liu <liudongdong3@huawei.com>,
	Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v16 1/9] PCI: Unify wait for link active into generic PCI
Date: Fri, 11 May 2018 06:43:20 -0400	[thread overview]
Message-ID: <1526035408-31328-2-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1526035408-31328-1-git-send-email-poza@codeaurora.org>

Clients such as HP, DPC are using pcie_wait_link_active(), which waits
till the link becomes active or inactive.

Made generic function and moved it to drivers/pci/pci.c

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 18a42f8..e0c2b8e 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -231,25 +231,11 @@ bool pciehp_check_link_active(struct controller *ctrl)
 	return ret;
 }
 
-static void __pcie_wait_link_active(struct controller *ctrl, bool active)
-{
-	int timeout = 1000;
-
-	if (pciehp_check_link_active(ctrl) == active)
-		return;
-	while (timeout > 0) {
-		msleep(10);
-		timeout -= 10;
-		if (pciehp_check_link_active(ctrl) == active)
-			return;
-	}
-	ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n",
-			active ? "set" : "cleared");
-}
-
 static void pcie_wait_link_active(struct controller *ctrl)
 {
-	__pcie_wait_link_active(ctrl, true);
+	struct pci_dev *pdev = ctrl_dev(ctrl);
+
+	pcie_wait_for_link(pdev, true);
 }
 
 static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e597655..adfc553 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4138,6 +4138,35 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 
 	return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS);
 }
+/**
+ * pcie_wait_for_link - Wait for link till it's active?/inactive?
+ * @pdev: Bridge device
+ * @active: waiting for active or inactive ?
+ *
+ * Use this to wait till link becomes active or inactive.
+ */
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+{
+	int timeout = 1000;
+	bool ret;
+	u16 lnk_status;
+
+	for (;;) {
+		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+		ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+		if (ret == active)
+			return true;
+		if (timeout <= 0)
+			break;
+		msleep(10);
+		timeout -= 10;
+	}
+
+	pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
+		 active ? "set" : "cleared");
+
+	return false;
+}
 
 void pci_reset_secondary_bus(struct pci_dev *dev)
 {
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 023f7cf..cec9d8c 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -353,6 +353,7 @@ static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
 
 void pci_enable_acs(struct pci_dev *dev);
 
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
 void pcie_aspm_exit_link_state(struct pci_dev *pdev);
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 8c57d60..80ec384 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -68,19 +68,9 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
 
 static void dpc_wait_link_inactive(struct dpc_dev *dpc)
 {
-	unsigned long timeout = jiffies + HZ;
 	struct pci_dev *pdev = dpc->dev->port;
-	struct device *dev = &dpc->dev->device;
-	u16 lnk_status;
 
-	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	while (lnk_status & PCI_EXP_LNKSTA_DLLLA &&
-					!time_after(jiffies, timeout)) {
-		msleep(10);
-		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	}
-	if (lnk_status & PCI_EXP_LNKSTA_DLLLA)
-		dev_warn(dev, "Link state not disabled for DPC event\n");
+	pcie_wait_for_link(pdev, false);
 }
 
 static void dpc_work(struct work_struct *work)
-- 
2.7.4

  reply	other threads:[~2018-05-11 10:43 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-11 10:43 [PATCH v16 0/9] Address error and recovery for AER and DPC Oza Pawandeep
2018-05-11 10:43 ` Oza Pawandeep [this message]
2018-05-11 10:43 ` [PATCH v16 2/9] pci-error-recovery: Add AER_FATAL handling Oza Pawandeep
2018-05-11 10:43 ` [PATCH v16 3/9] PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices Oza Pawandeep
2018-05-15 23:59   ` Bjorn Helgaas
2018-05-16  5:49     ` poza
2018-05-11 10:43 ` [PATCH v16 4/9] PCI/AER: Rename error recovery to generic PCI naming Oza Pawandeep
2018-05-11 10:43 ` [PATCH v16 5/9] PCI/AER: Factor out error reporting from AER Oza Pawandeep
2018-05-11 12:58   ` Lukas Wunner
2018-05-11 15:34     ` poza
2018-05-11 15:54       ` Lukas Wunner
2018-05-11 16:11         ` poza
2018-05-16  0:06   ` Bjorn Helgaas
2018-05-11 10:43 ` [PATCH v16 6/9] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-05-11 10:43 ` [PATCH v16 7/9] PCI/PORTDRV: Implement generic find device Oza Pawandeep
2018-05-11 10:43 ` [PATCH v16 8/9] PCI/DPC: Unify and plumb error handling into DPC Oza Pawandeep
2018-05-11 11:52   ` poza
2018-05-15 23:56     ` Bjorn Helgaas
2018-05-16  8:16       ` poza
2018-05-16 10:52         ` Bjorn Helgaas
2018-05-16 12:15           ` poza
2018-05-16 13:04             ` Bjorn Helgaas
2018-05-16 13:58               ` poza
2018-05-16 14:58               ` poza
2018-05-16 20:02                 ` Bjorn Helgaas
2018-05-16 12:51           ` poza
2018-05-16 13:09             ` Bjorn Helgaas
2018-05-11 10:43 ` [PATCH v16 9/9] PCI/DPC: Disable ERR_NONFATAL and enable ERR_FATAL for DPC Oza Pawandeep
2018-05-16  0:09 ` [PATCH v16 0/9] Address error and recovery for AER and DPC Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526035408-31328-2-git-send-email-poza@codeaurora.org \
    --to=poza@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=keith.busch@intel.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liudongdong3@huawei.com \
    --cc=okaya@codeaurora.org \
    --cc=pombredanne@nexb.com \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=wzhang@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).