From: Anson Huang <Anson.Huang@nxp.com>
To: lgirdwood@gmail.com, broonie@kernel.org
Cc: Linux-imx@nxp.com, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] regulator: pfuze100: add enable/disable for switch
Date: Thu, 17 May 2018 15:27:21 +0800 [thread overview]
Message-ID: <1526542042-28485-1-git-send-email-Anson.Huang@nxp.com> (raw)
Add enable/disable support for switch regulator on pfuze100.
Based on Robin Gong's patch from the NXP kernel tree.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
drivers/regulator/pfuze100-regulator.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 680f076..053eb1e 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -155,6 +155,9 @@ static const struct regulator_ops pfuze100_fixed_regulator_ops = {
};
static const struct regulator_ops pfuze100_sw_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -200,6 +203,11 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
.uV_step = (step), \
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
.vsel_mask = 0x3f, \
+ .enable_reg = (base) + PFUZE100_MODE_OFFSET, \
+ .enable_val = 0xc, \
+ .disable_val = 0x0, \
+ .enable_mask = 0xf, \
+ .enable_time = 500, \
}, \
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
.stby_mask = 0x3f, \
--
2.7.4
next reply other threads:[~2018-05-17 7:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 7:27 Anson Huang [this message]
2018-05-17 7:27 ` [PATCH 2/2] regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops Anson Huang
2018-05-17 17:13 ` Applied "regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops" to the regulator tree Mark Brown
2018-05-17 17:13 ` Applied "regulator: pfuze100: add enable/disable for switch" " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526542042-28485-1-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).