LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation
@ 2018-06-19 16:04 Masami Hiramatsu
  2018-06-19 16:04 ` [PATCH -tip v6 01/27] Documentation/kprobes: Fix to remove remaining jprobe Masami Hiramatsu
                   ` (26 more replies)
  0 siblings, 27 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:04 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch

Hello,

This is the 6th version of the series for removing jprobe.
Previous version is here:

 https://lkml.org/lkml/2018/6/4/681

In this version, I fixed x86 and powerpc kprobe_ftrace_handler
to include post-handler emulation code according to Naveen's
suggestion. This also simplifies [24/27] a bit. Also fixed some
typo in patch description.

Series structure
=====
Basically this series introduces 3 major changes;

- Remove jprobe implementation ([2/27] - [12/27])

- Remove break_handler() related code ([13/27] - [23/27])
  This should be done after (or with) removing jprobe
  because break_handler is only used by jprobe.
 (I'm not so sure, should I merge above patches into one
  arch-wide patch as next one does?)

- Clean current_kprobe and enable preempt if pre_handler()
  returns !0 ([24/27] and [25/27]<- x86 specific update)
  This also depends on above patches because those
  current_kprobe and preemption are expected to be adjusted
  by jprobe implementation via break_handler.

And some minor changes;

- Document cleanup and update ([1/27], [26/27])

And finally remove jprobe stub APIs and break_handler
from kprobes.h ([27/27]). Of course this depends on
above patches.

Result
=====
I've tested it with kprobe sanity test on x86-64, and arm64
but for other archs, I just did cross-build test.

Thank you,

---

Masami Hiramatsu (27):
      Documentation/kprobes: Fix to remove remaining jprobe
      kprobes: Remove jprobe API implementation
      kprobes/x86: Remove jprobe implementation
      ARC: kprobes: Remove jprobe implementation
      ARM: kprobes: Remove jprobe arm implementation
      arm64: kprobes: Remove jprobe implementation
      powerpc/kprobes: Remove jprobe powerpc implementation
      ia64: kprobes: Remove jprobe implementation
      MIPS: kprobes: Remove jprobe implementation
      s390/kprobes: Remove jprobe implementation
      sh: kprobes: Remove jprobe implementation
      sparc64: kprobes: Remove jprobe implementation
      kprobes: Don't check the ->break_handler() in generic kprobes code
      kprobes/x86: Don't call ->break_handler() in x86 kprobes
      ARC: kprobes: Don't call the ->break_handler() in ARC kprobes code
      ARM: kprobes: Don't call the ->break_handler() in arm kprobes code
      arm64: kprobes: Don't call the ->break_handler() in arm64 kprobes code
      powerpc/kprobes: Don't call the ->break_handler() in powerpc kprobes code
      ia64: kprobes: Don't call the ->break_handler() in ia64 kprobes code
      MIPS: kprobes: Don't call the ->break_handler() in MIPS kprobes code
      s390/kprobes: Don't call the ->break_handler() in s390 kprobes code
      sh: kprobes: Don't call the ->break_handler() in SH kprobes code
      sparc64: kprobes: Don't call the ->break_handler() in sparc64 kprobes code
      bpf: error-inject: kprobes: Clear current_kprobe and enable preempt in kprobe
      kprobes/x86: Do not disable preempt on int3 path
      Documentation: kprobes: Add how to change the execution path
      kprobes: Remove jprobe stub API


 Documentation/kprobes.txt                      |   35 +++++-
 arch/arc/include/asm/kprobes.h                 |    2 
 arch/arc/kernel/kprobes.c                      |   50 +--------
 arch/arm/include/asm/kprobes.h                 |    2 
 arch/arm/include/asm/probes.h                  |    1 
 arch/arm/probes/kprobes/core.c                 |  135 +-----------------------
 arch/arm64/include/asm/kprobes.h               |    1 
 arch/arm64/kernel/probes/kprobes.c             |   86 +--------------
 arch/ia64/include/asm/kprobes.h                |    2 
 arch/ia64/include/uapi/asm/break.h             |    1 
 arch/ia64/kernel/Makefile                      |    2 
 arch/ia64/kernel/jprobes.S                     |   90 ----------------
 arch/ia64/kernel/kprobes.c                     |   93 +----------------
 arch/mips/include/asm/kprobes.h                |   13 --
 arch/mips/kernel/kprobes.c                     |   70 ++----------
 arch/powerpc/include/asm/kprobes.h             |   12 --
 arch/powerpc/kernel/kprobes-ftrace.c           |   72 ++-----------
 arch/powerpc/kernel/kprobes.c                  |   92 +++-------------
 arch/powerpc/kernel/trace/ftrace_64_mprofile.S |   39 +------
 arch/s390/include/asm/kprobes.h                |    2 
 arch/s390/kernel/kprobes.c                     |   86 +--------------
 arch/sh/include/asm/kprobes.h                  |    4 -
 arch/sh/kernel/kprobes.c                       |   72 +------------
 arch/sparc/include/asm/kprobes.h               |    1 
 arch/sparc/kernel/kprobes.c                    |   65 +-----------
 arch/x86/include/asm/kprobes.h                 |    5 -
 arch/x86/kernel/kprobes/common.h               |   10 --
 arch/x86/kernel/kprobes/core.c                 |  119 +--------------------
 arch/x86/kernel/kprobes/ftrace.c               |   49 ++-------
 arch/x86/kernel/kprobes/opt.c                  |    1 
 include/linux/kprobes.h                        |   53 ---------
 kernel/fail_function.c                         |    3 -
 kernel/kprobes.c                               |  115 +-------------------
 kernel/test_kprobes.c                          |   94 -----------------
 kernel/trace/trace_kprobe.c                    |   11 +-
 lib/Kconfig.debug                              |    2 
 36 files changed, 139 insertions(+), 1351 deletions(-)
 delete mode 100644 arch/ia64/kernel/jprobes.S

--
Masami Hiramatsu (Linaro)

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 01/27] Documentation/kprobes: Fix to remove remaining jprobe
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
@ 2018-06-19 16:04 ` Masami Hiramatsu
  2018-06-19 16:05 ` [PATCH -tip v6 02/27] kprobes: Remove jprobe API implementation Masami Hiramatsu
                   ` (25 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:04 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Jonathan Corbet, linux-doc

Remove jps from the document, since jprobe is removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/kprobes.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 22208bf2386d..5ae80baf3921 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -474,7 +474,7 @@ error occurs during registration, all probes in the array, up to
 the bad probe, are safely unregistered before the register_*probes
 function returns.
 
-- kps/rps/jps: an array of pointers to ``*probe`` data structures
+- kps/rps: an array of pointers to ``*probe`` data structures
 - num: the number of the array entries.
 
 .. note::


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 02/27] kprobes: Remove jprobe API implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
  2018-06-19 16:04 ` [PATCH -tip v6 01/27] Documentation/kprobes: Fix to remove remaining jprobe Masami Hiramatsu
@ 2018-06-19 16:05 ` Masami Hiramatsu
  2018-06-19 16:05 ` [PATCH -tip v6 03/27] kprobes/x86: Remove jprobe implementation Masami Hiramatsu
                   ` (24 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:05 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch

Remove jprobe API implementations and test cases for
those APIs which is no more used.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 Changes in v4:
  - Cleanup lib/Kconfig.debug description too.
 Changes in v3:
  - Remove test cases.
---
 include/linux/kprobes.h |    3 --
 kernel/kprobes.c        |   78 +--------------------------------------
 kernel/test_kprobes.c   |   94 -----------------------------------------------
 lib/Kconfig.debug       |    2 +
 4 files changed, 2 insertions(+), 175 deletions(-)

diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 9440a2fc8893..b520baa65682 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -389,9 +389,6 @@ int register_kprobe(struct kprobe *p);
 void unregister_kprobe(struct kprobe *p);
 int register_kprobes(struct kprobe **kps, int num);
 void unregister_kprobes(struct kprobe **kps, int num);
-int setjmp_pre_handler(struct kprobe *, struct pt_regs *);
-int longjmp_break_handler(struct kprobe *, struct pt_regs *);
-void jprobe_return(void);
 unsigned long arch_deref_entry_point(void *);
 
 int register_kretprobe(struct kretprobe *rp);
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index ea619021d901..69de130595f7 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1272,7 +1272,7 @@ NOKPROBE_SYMBOL(cleanup_rp_inst);
 
 /*
 * Add the new probe to ap->list. Fail if this is the
-* second jprobe at the address - two jprobes can't coexist
+* second break_handler at the address
 */
 static int add_new_kprobe(struct kprobe *ap, struct kprobe *p)
 {
@@ -1812,77 +1812,6 @@ unsigned long __weak arch_deref_entry_point(void *entry)
 	return (unsigned long)entry;
 }
 
-#if 0
-int register_jprobes(struct jprobe **jps, int num)
-{
-	int ret = 0, i;
-
-	if (num <= 0)
-		return -EINVAL;
-
-	for (i = 0; i < num; i++) {
-		ret = register_jprobe(jps[i]);
-
-		if (ret < 0) {
-			if (i > 0)
-				unregister_jprobes(jps, i);
-			break;
-		}
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(register_jprobes);
-
-int register_jprobe(struct jprobe *jp)
-{
-	unsigned long addr, offset;
-	struct kprobe *kp = &jp->kp;
-
-	/*
-	 * Verify probepoint as well as the jprobe handler are
-	 * valid function entry points.
-	 */
-	addr = arch_deref_entry_point(jp->entry);
-
-	if (kallsyms_lookup_size_offset(addr, NULL, &offset) && offset == 0 &&
-	    kprobe_on_func_entry(kp->addr, kp->symbol_name, kp->offset)) {
-		kp->pre_handler = setjmp_pre_handler;
-		kp->break_handler = longjmp_break_handler;
-		return register_kprobe(kp);
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(register_jprobe);
-
-void unregister_jprobe(struct jprobe *jp)
-{
-	unregister_jprobes(&jp, 1);
-}
-EXPORT_SYMBOL_GPL(unregister_jprobe);
-
-void unregister_jprobes(struct jprobe **jps, int num)
-{
-	int i;
-
-	if (num <= 0)
-		return;
-	mutex_lock(&kprobe_mutex);
-	for (i = 0; i < num; i++)
-		if (__unregister_kprobe_top(&jps[i]->kp) < 0)
-			jps[i]->kp.addr = NULL;
-	mutex_unlock(&kprobe_mutex);
-
-	synchronize_sched();
-	for (i = 0; i < num; i++) {
-		if (jps[i]->kp.addr)
-			__unregister_kprobe_bottom(&jps[i]->kp);
-	}
-}
-EXPORT_SYMBOL_GPL(unregister_jprobes);
-#endif
-
 #ifdef CONFIG_KRETPROBES
 /*
  * This kprobe pre_handler is registered with every kretprobe. When probe
@@ -2329,8 +2258,6 @@ static void report_probe(struct seq_file *pi, struct kprobe *p,
 
 	if (p->pre_handler == pre_handler_kretprobe)
 		kprobe_type = "r";
-	else if (p->pre_handler == setjmp_pre_handler)
-		kprobe_type = "j";
 	else
 		kprobe_type = "k";
 
@@ -2637,6 +2564,3 @@ late_initcall(debugfs_kprobe_init);
 #endif /* CONFIG_DEBUG_FS */
 
 module_init(init_kprobes);
-
-/* defined in arch/.../kernel/kprobes.c */
-EXPORT_SYMBOL_GPL(jprobe_return);
diff --git a/kernel/test_kprobes.c b/kernel/test_kprobes.c
index dd53e354f630..7bca480151b0 100644
--- a/kernel/test_kprobes.c
+++ b/kernel/test_kprobes.c
@@ -162,90 +162,6 @@ static int test_kprobes(void)
 
 }
 
-#if 0
-static u32 jph_val;
-
-static u32 j_kprobe_target(u32 value)
-{
-	if (preemptible()) {
-		handler_errors++;
-		pr_err("jprobe-handler is preemptible\n");
-	}
-	if (value != rand1) {
-		handler_errors++;
-		pr_err("incorrect value in jprobe handler\n");
-	}
-
-	jph_val = rand1;
-	jprobe_return();
-	return 0;
-}
-
-static struct jprobe jp = {
-	.entry		= j_kprobe_target,
-	.kp.symbol_name = "kprobe_target"
-};
-
-static int test_jprobe(void)
-{
-	int ret;
-
-	ret = register_jprobe(&jp);
-	if (ret < 0) {
-		pr_err("register_jprobe returned %d\n", ret);
-		return ret;
-	}
-
-	ret = target(rand1);
-	unregister_jprobe(&jp);
-	if (jph_val == 0) {
-		pr_err("jprobe handler not called\n");
-		handler_errors++;
-	}
-
-	return 0;
-}
-
-static struct jprobe jp2 = {
-	.entry          = j_kprobe_target,
-	.kp.symbol_name = "kprobe_target2"
-};
-
-static int test_jprobes(void)
-{
-	int ret;
-	struct jprobe *jps[2] = {&jp, &jp2};
-
-	/* addr and flags should be cleard for reusing kprobe. */
-	jp.kp.addr = NULL;
-	jp.kp.flags = 0;
-	ret = register_jprobes(jps, 2);
-	if (ret < 0) {
-		pr_err("register_jprobes returned %d\n", ret);
-		return ret;
-	}
-
-	jph_val = 0;
-	ret = target(rand1);
-	if (jph_val == 0) {
-		pr_err("jprobe handler not called\n");
-		handler_errors++;
-	}
-
-	jph_val = 0;
-	ret = target2(rand1);
-	if (jph_val == 0) {
-		pr_err("jprobe handler2 not called\n");
-		handler_errors++;
-	}
-	unregister_jprobes(jps, 2);
-
-	return 0;
-}
-#else
-#define test_jprobe() (0)
-#define test_jprobes() (0)
-#endif
 #ifdef CONFIG_KRETPROBES
 static u32 krph_val;
 
@@ -383,16 +299,6 @@ int init_test_probes(void)
 	if (ret < 0)
 		errors++;
 
-	num_tests++;
-	ret = test_jprobe();
-	if (ret < 0)
-		errors++;
-
-	num_tests++;
-	ret = test_jprobes();
-	if (ret < 0)
-		errors++;
-
 #ifdef CONFIG_KRETPROBES
 	num_tests++;
 	ret = test_kretprobe();
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index eb885942eb0f..77677aa3c603 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1715,7 +1715,7 @@ config KPROBES_SANITY_TEST
 	default n
 	help
 	  This option provides for testing basic kprobes functionality on
-	  boot. A sample kprobe, jprobe and kretprobe are inserted and
+	  boot. Samples of kprobe and kretprobe are inserted and
 	  verified for functionality.
 
 	  Say N if you are unsure.


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 03/27] kprobes/x86: Remove jprobe implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
  2018-06-19 16:04 ` [PATCH -tip v6 01/27] Documentation/kprobes: Fix to remove remaining jprobe Masami Hiramatsu
  2018-06-19 16:05 ` [PATCH -tip v6 02/27] kprobes: Remove jprobe API implementation Masami Hiramatsu
@ 2018-06-19 16:05 ` Masami Hiramatsu
  2018-06-19 16:06 ` [PATCH -tip v6 04/27] ARC: kprobes: " Masami Hiramatsu
                   ` (23 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:05 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, x86

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/x86.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
---
 arch/x86/include/asm/kprobes.h |    3 -
 arch/x86/kernel/kprobes/core.c |   96 +---------------------------------------
 2 files changed, 3 insertions(+), 96 deletions(-)

diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h
index 367d99cff426..06782c2efa04 100644
--- a/arch/x86/include/asm/kprobes.h
+++ b/arch/x86/include/asm/kprobes.h
@@ -111,9 +111,6 @@ struct kprobe_ctlblk {
 	unsigned long kprobe_status;
 	unsigned long kprobe_old_flags;
 	unsigned long kprobe_saved_flags;
-	unsigned long *jprobe_saved_sp;
-	struct pt_regs jprobe_saved_regs;
-	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
 	struct prev_kprobe prev_kprobe;
 };
 
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 6f4d42377fe5..1b2d1acba810 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -66,8 +66,6 @@
 
 #include "common.h"
 
-void jprobe_return_end(void);
-
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
@@ -690,10 +688,9 @@ int kprobe_int3_handler(struct pt_regs *regs)
 			/*
 			 * If we have no pre-handler or it returned 0, we
 			 * continue with normal processing.  If we have a
-			 * pre-handler and it returned non-zero, it prepped
-			 * for calling the break_handler below on re-entry
-			 * for jprobe processing, so get out doing nothing
-			 * more here.
+			 * pre-handler and it returned non-zero, that means
+			 * user handler setup registers to exit to another
+			 * instruction, we must skip the single stepping.
 			 */
 			if (!p->pre_handler || !p->pre_handler(p, regs))
 				setup_singlestep(p, regs, kcb, 0);
@@ -1083,93 +1080,6 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val,
 }
 NOKPROBE_SYMBOL(kprobe_exceptions_notify);
 
-int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	unsigned long addr;
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	kcb->jprobe_saved_regs = *regs;
-	kcb->jprobe_saved_sp = stack_addr(regs);
-	addr = (unsigned long)(kcb->jprobe_saved_sp);
-
-	/*
-	 * As Linus pointed out, gcc assumes that the callee
-	 * owns the argument space and could overwrite it, e.g.
-	 * tailcall optimization. So, to be absolutely safe
-	 * we also save and restore enough stack bytes to cover
-	 * the argument area.
-	 * Use __memcpy() to avoid KASAN stack out-of-bounds reports as we copy
-	 * raw stack chunk with redzones:
-	 */
-	__memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr, MIN_STACK_SIZE(addr));
-	regs->ip = (unsigned long)(jp->entry);
-
-	/*
-	 * jprobes use jprobe_return() which skips the normal return
-	 * path of the function, and this messes up the accounting of the
-	 * function graph tracer to get messed up.
-	 *
-	 * Pause function graph tracing while performing the jprobe function.
-	 */
-	pause_graph_tracing();
-	return 1;
-}
-NOKPROBE_SYMBOL(setjmp_pre_handler);
-
-void jprobe_return(void)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	/* Unpoison stack redzones in the frames we are going to jump over. */
-	kasan_unpoison_stack_above_sp_to(kcb->jprobe_saved_sp);
-
-	asm volatile (
-#ifdef CONFIG_X86_64
-			"       xchg   %%rbx,%%rsp	\n"
-#else
-			"       xchgl   %%ebx,%%esp	\n"
-#endif
-			"       int3			\n"
-			"       .globl jprobe_return_end\n"
-			"       jprobe_return_end:	\n"
-			"       nop			\n"::"b"
-			(kcb->jprobe_saved_sp):"memory");
-}
-NOKPROBE_SYMBOL(jprobe_return);
-NOKPROBE_SYMBOL(jprobe_return_end);
-
-int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	u8 *addr = (u8 *) (regs->ip - 1);
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	void *saved_sp = kcb->jprobe_saved_sp;
-
-	if ((addr > (u8 *) jprobe_return) &&
-	    (addr < (u8 *) jprobe_return_end)) {
-		if (stack_addr(regs) != saved_sp) {
-			struct pt_regs *saved_regs = &kcb->jprobe_saved_regs;
-			printk(KERN_ERR
-			       "current sp %p does not match saved sp %p\n",
-			       stack_addr(regs), saved_sp);
-			printk(KERN_ERR "Saved registers for jprobe %p\n", jp);
-			show_regs(saved_regs);
-			printk(KERN_ERR "Current registers\n");
-			show_regs(regs);
-			BUG();
-		}
-		/* It's OK to start function graph tracing again */
-		unpause_graph_tracing();
-		*regs = kcb->jprobe_saved_regs;
-		__memcpy(saved_sp, kcb->jprobes_stack, MIN_STACK_SIZE(saved_sp));
-		preempt_enable_no_resched();
-		return 1;
-	}
-	return 0;
-}
-NOKPROBE_SYMBOL(longjmp_break_handler);
-
 bool arch_within_kprobe_blacklist(unsigned long addr)
 {
 	bool is_in_entry_trampoline_section = false;


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 04/27] ARC: kprobes: Remove jprobe implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (2 preceding siblings ...)
  2018-06-19 16:05 ` [PATCH -tip v6 03/27] kprobes/x86: Remove jprobe implementation Masami Hiramatsu
@ 2018-06-19 16:06 ` " Masami Hiramatsu
  2018-06-19 16:06 ` [PATCH -tip v6 05/27] ARM: kprobes: Remove jprobe arm implementation Masami Hiramatsu
                   ` (22 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:06 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Vineet Gupta, linux-snps-arc

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/arc.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
---
 arch/arc/include/asm/kprobes.h |    2 --
 arch/arc/kernel/kprobes.c      |   38 ++------------------------------------
 2 files changed, 2 insertions(+), 38 deletions(-)

diff --git a/arch/arc/include/asm/kprobes.h b/arch/arc/include/asm/kprobes.h
index 2e52d18e6bc7..2c1b479d5aea 100644
--- a/arch/arc/include/asm/kprobes.h
+++ b/arch/arc/include/asm/kprobes.h
@@ -45,8 +45,6 @@ struct prev_kprobe {
 
 struct kprobe_ctlblk {
 	unsigned int kprobe_status;
-	struct pt_regs jprobe_saved_regs;
-	char jprobes_stack[MAX_STACK_SIZE];
 	struct prev_kprobe prev_kprobe;
 };
 
diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
index 42b05046fad9..7811a6bbe8f0 100644
--- a/arch/arc/kernel/kprobes.c
+++ b/arch/arc/kernel/kprobes.c
@@ -225,10 +225,8 @@ int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 
 		/* If we have no pre-handler or it returned 0, we continue with
 		 * normal processing. If we have a pre-handler and it returned
-		 * non-zero - which is expected from setjmp_pre_handler for
-		 * jprobe, we return without single stepping and leave that to
-		 * the break-handler which is invoked by a kprobe from
-		 * jprobe_return
+		 * non-zero - which means user handler setup registers to exit
+		 * to another instruction, we must skip the single stepping.
 		 */
 		if (!p->pre_handler || !p->pre_handler(p, regs)) {
 			setup_singlestep(p, regs);
@@ -386,38 +384,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 	return ret;
 }
 
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long sp_addr = regs->sp;
-
-	kcb->jprobe_saved_regs = *regs;
-	memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr));
-	regs->ret = (unsigned long)(jp->entry);
-
-	return 1;
-}
-
-void __kprobes jprobe_return(void)
-{
-	__asm__ __volatile__("unimp_s");
-	return;
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long sp_addr;
-
-	*regs = kcb->jprobe_saved_regs;
-	sp_addr = regs->sp;
-	memcpy((void *)sp_addr, kcb->jprobes_stack, MIN_STACK_SIZE(sp_addr));
-	preempt_enable_no_resched();
-
-	return 1;
-}
-
 static void __used kretprobe_trampoline_holder(void)
 {
 	__asm__ __volatile__(".global kretprobe_trampoline\n"


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 05/27] ARM: kprobes: Remove jprobe arm implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (3 preceding siblings ...)
  2018-06-19 16:06 ` [PATCH -tip v6 04/27] ARC: kprobes: " Masami Hiramatsu
@ 2018-06-19 16:06 ` Masami Hiramatsu
  2018-06-19 16:07 ` [PATCH -tip v6 06/27] arm64: kprobes: Remove jprobe implementation Masami Hiramatsu
                   ` (21 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:06 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Russell King, linux-arm-kernel

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/arm.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm/include/asm/kprobes.h |    2 -
 arch/arm/include/asm/probes.h  |    1 
 arch/arm/probes/kprobes/core.c |  114 ----------------------------------------
 3 files changed, 117 deletions(-)

diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index 59655459da59..82290f212d8e 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -44,8 +44,6 @@ struct prev_kprobe {
 struct kprobe_ctlblk {
 	unsigned int kprobe_status;
 	struct prev_kprobe prev_kprobe;
-	struct pt_regs jprobe_saved_regs;
-	char jprobes_stack[MAX_STACK_SIZE];
 };
 
 void arch_remove_kprobe(struct kprobe *);
diff --git a/arch/arm/include/asm/probes.h b/arch/arm/include/asm/probes.h
index 1e5b9bb92270..991c9127c650 100644
--- a/arch/arm/include/asm/probes.h
+++ b/arch/arm/include/asm/probes.h
@@ -51,7 +51,6 @@ struct arch_probes_insn {
  * We assume one instruction can consume at most 64 bytes stack, which is
  * 'push {r0-r15}'. Instructions consume more or unknown stack space like
  * 'str r0, [sp, #-80]' and 'str r0, [sp, r1]' should be prohibit to probe.
- * Both kprobe and jprobe use this macro.
  */
 #define MAX_STACK_SIZE			64
 
diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c
index e90cc8a08186..23562111c511 100644
--- a/arch/arm/probes/kprobes/core.c
+++ b/arch/arm/probes/kprobes/core.c
@@ -47,9 +47,6 @@
 			   (unsigned long)(addr) +	\
 			   (size))
 
-/* Used as a marker in ARM_pc to note when we're in a jprobe. */
-#define JPROBE_MAGIC_ADDR		0xffffffff
-
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
@@ -521,117 +518,6 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 	regs->ARM_lr = (unsigned long)&kretprobe_trampoline;
 }
 
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	long sp_addr = regs->ARM_sp;
-	long cpsr;
-
-	kcb->jprobe_saved_regs = *regs;
-	memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr));
-	regs->ARM_pc = (long)jp->entry;
-
-	cpsr = regs->ARM_cpsr | PSR_I_BIT;
-#ifdef CONFIG_THUMB2_KERNEL
-	/* Set correct Thumb state in cpsr */
-	if (regs->ARM_pc & 1)
-		cpsr |= PSR_T_BIT;
-	else
-		cpsr &= ~PSR_T_BIT;
-#endif
-	regs->ARM_cpsr = cpsr;
-
-	preempt_disable();
-	return 1;
-}
-
-void __kprobes jprobe_return(void)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	__asm__ __volatile__ (
-		/*
-		 * Setup an empty pt_regs. Fill SP and PC fields as
-		 * they're needed by longjmp_break_handler.
-		 *
-		 * We allocate some slack between the original SP and start of
-		 * our fabricated regs. To be precise we want to have worst case
-		 * covered which is STMFD with all 16 regs so we allocate 2 *
-		 * sizeof(struct_pt_regs)).
-		 *
-		 * This is to prevent any simulated instruction from writing
-		 * over the regs when they are accessing the stack.
-		 */
-#ifdef CONFIG_THUMB2_KERNEL
-		"sub    r0, %0, %1		\n\t"
-		"mov    sp, r0			\n\t"
-#else
-		"sub    sp, %0, %1		\n\t"
-#endif
-		"ldr    r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
-		"str    %0, [sp, %2]		\n\t"
-		"str    r0, [sp, %3]		\n\t"
-		"mov    r0, sp			\n\t"
-		"bl     kprobe_handler		\n\t"
-
-		/*
-		 * Return to the context saved by setjmp_pre_handler
-		 * and restored by longjmp_break_handler.
-		 */
-#ifdef CONFIG_THUMB2_KERNEL
-		"ldr	lr, [sp, %2]		\n\t" /* lr = saved sp */
-		"ldrd	r0, r1, [sp, %5]	\n\t" /* r0,r1 = saved lr,pc */
-		"ldr	r2, [sp, %4]		\n\t" /* r2 = saved psr */
-		"stmdb	lr!, {r0, r1, r2}	\n\t" /* push saved lr and */
-						      /* rfe context */
-		"ldmia	sp, {r0 - r12}		\n\t"
-		"mov	sp, lr			\n\t"
-		"ldr	lr, [sp], #4		\n\t"
-		"rfeia	sp!			\n\t"
-#else
-		"ldr	r0, [sp, %4]		\n\t"
-		"msr	cpsr_cxsf, r0		\n\t"
-		"ldmia	sp, {r0 - pc}		\n\t"
-#endif
-		:
-		: "r" (kcb->jprobe_saved_regs.ARM_sp),
-		  "I" (sizeof(struct pt_regs) * 2),
-		  "J" (offsetof(struct pt_regs, ARM_sp)),
-		  "J" (offsetof(struct pt_regs, ARM_pc)),
-		  "J" (offsetof(struct pt_regs, ARM_cpsr)),
-		  "J" (offsetof(struct pt_regs, ARM_lr))
-		: "memory", "cc");
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	long stack_addr = kcb->jprobe_saved_regs.ARM_sp;
-	long orig_sp = regs->ARM_sp;
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-
-	if (regs->ARM_pc == JPROBE_MAGIC_ADDR) {
-		if (orig_sp != stack_addr) {
-			struct pt_regs *saved_regs =
-				(struct pt_regs *)kcb->jprobe_saved_regs.ARM_sp;
-			printk("current sp %lx does not match saved sp %lx\n",
-			       orig_sp, stack_addr);
-			printk("Saved registers for jprobe %p\n", jp);
-			show_regs(saved_regs);
-			printk("Current registers\n");
-			show_regs(regs);
-			BUG();
-		}
-		*regs = kcb->jprobe_saved_regs;
-		memcpy((void *)stack_addr, kcb->jprobes_stack,
-		       MIN_STACK_SIZE(stack_addr));
-		preempt_enable_no_resched();
-		return 1;
-	}
-	return 0;
-}
-
 int __kprobes arch_trampoline_kprobe(struct kprobe *p)
 {
 	return 0;


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 06/27] arm64: kprobes: Remove jprobe implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (4 preceding siblings ...)
  2018-06-19 16:06 ` [PATCH -tip v6 05/27] ARM: kprobes: Remove jprobe arm implementation Masami Hiramatsu
@ 2018-06-19 16:07 ` Masami Hiramatsu
  2018-06-19 16:07 ` [PATCH -tip v6 07/27] powerpc/kprobes: Remove jprobe powerpc implementation Masami Hiramatsu
                   ` (20 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:07 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Catalin Marinas, linux-arm-kernel

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/arm64.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/include/asm/kprobes.h   |    1 -
 arch/arm64/kernel/probes/kprobes.c |   68 ------------------------------------
 2 files changed, 69 deletions(-)

diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h
index 6deb8d726041..d5a44cf859e9 100644
--- a/arch/arm64/include/asm/kprobes.h
+++ b/arch/arm64/include/asm/kprobes.h
@@ -48,7 +48,6 @@ struct kprobe_ctlblk {
 	unsigned long saved_irqflag;
 	struct prev_kprobe prev_kprobe;
 	struct kprobe_step_ctx ss_ctx;
-	struct pt_regs jprobe_saved_regs;
 };
 
 void arch_remove_kprobe(struct kprobe *);
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index d849d9804011..3ca2351109a6 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -465,74 +465,6 @@ kprobe_breakpoint_handler(struct pt_regs *regs, unsigned int esr)
 	return DBG_HOOK_HANDLED;
 }
 
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	kcb->jprobe_saved_regs = *regs;
-	/*
-	 * Since we can't be sure where in the stack frame "stacked"
-	 * pass-by-value arguments are stored we just don't try to
-	 * duplicate any of the stack. Do not use jprobes on functions that
-	 * use more than 64 bytes (after padding each to an 8 byte boundary)
-	 * of arguments, or pass individual arguments larger than 16 bytes.
-	 */
-
-	instruction_pointer_set(regs, (unsigned long) jp->entry);
-	preempt_disable();
-	pause_graph_tracing();
-	return 1;
-}
-
-void __kprobes jprobe_return(void)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	/*
-	 * Jprobe handler return by entering break exception,
-	 * encoded same as kprobe, but with following conditions
-	 * -a special PC to identify it from the other kprobes.
-	 * -restore stack addr to original saved pt_regs
-	 */
-	asm volatile("				mov sp, %0	\n"
-		     "jprobe_return_break:	brk %1		\n"
-		     :
-		     : "r" (kcb->jprobe_saved_regs.sp),
-		       "I" (BRK64_ESR_KPROBES)
-		     : "memory");
-
-	unreachable();
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	long stack_addr = kcb->jprobe_saved_regs.sp;
-	long orig_sp = kernel_stack_pointer(regs);
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	extern const char jprobe_return_break[];
-
-	if (instruction_pointer(regs) != (u64) jprobe_return_break)
-		return 0;
-
-	if (orig_sp != stack_addr) {
-		struct pt_regs *saved_regs =
-		    (struct pt_regs *)kcb->jprobe_saved_regs.sp;
-		pr_err("current sp %lx does not match saved sp %lx\n",
-		       orig_sp, stack_addr);
-		pr_err("Saved registers for jprobe %p\n", jp);
-		__show_regs(saved_regs);
-		pr_err("Current registers\n");
-		__show_regs(regs);
-		BUG();
-	}
-	unpause_graph_tracing();
-	*regs = kcb->jprobe_saved_regs;
-	preempt_enable_no_resched();
-	return 1;
-}
-
 bool arch_within_kprobe_blacklist(unsigned long addr)
 {
 	if ((addr >= (unsigned long)__kprobes_text_start &&


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 07/27] powerpc/kprobes: Remove jprobe powerpc implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (5 preceding siblings ...)
  2018-06-19 16:07 ` [PATCH -tip v6 06/27] arm64: kprobes: Remove jprobe implementation Masami Hiramatsu
@ 2018-06-19 16:07 ` Masami Hiramatsu
  2018-06-19 16:08 ` [PATCH -tip v6 08/27] ia64: kprobes: Remove jprobe implementation Masami Hiramatsu
                   ` (19 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:07 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Benjamin Herrenschmidt, Paul Mackerras,
	Michael Ellerman, linuxppc-dev

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/powerpc. This also reverts commits
related __is_active_jprobe() function.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
---
 arch/powerpc/include/asm/kprobes.h             |    2 -
 arch/powerpc/kernel/kprobes-ftrace.c           |   15 -------
 arch/powerpc/kernel/kprobes.c                  |   54 ------------------------
 arch/powerpc/kernel/trace/ftrace_64_mprofile.S |   39 ++---------------
 4 files changed, 5 insertions(+), 105 deletions(-)

diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
index 9f3be5c8a4a3..674036db558b 100644
--- a/arch/powerpc/include/asm/kprobes.h
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -88,7 +88,6 @@ struct prev_kprobe {
 struct kprobe_ctlblk {
 	unsigned long kprobe_status;
 	unsigned long kprobe_saved_msr;
-	struct pt_regs jprobe_saved_regs;
 	struct prev_kprobe prev_kprobe;
 };
 
@@ -104,7 +103,6 @@ extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
 extern int kprobe_handler(struct pt_regs *regs);
 extern int kprobe_post_handler(struct pt_regs *regs);
 #ifdef CONFIG_KPROBES_ON_FTRACE
-extern int __is_active_jprobe(unsigned long addr);
 extern int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
 			   struct kprobe_ctlblk *kcb);
 #else
diff --git a/arch/powerpc/kernel/kprobes-ftrace.c b/arch/powerpc/kernel/kprobes-ftrace.c
index 7a1f99f1b47f..1b316331c2d9 100644
--- a/arch/powerpc/kernel/kprobes-ftrace.c
+++ b/arch/powerpc/kernel/kprobes-ftrace.c
@@ -25,21 +25,6 @@
 #include <linux/preempt.h>
 #include <linux/ftrace.h>
 
-/*
- * This is called from ftrace code after invoking registered handlers to
- * disambiguate regs->nip changes done by jprobes and livepatch. We check if
- * there is an active jprobe at the provided address (mcount location).
- */
-int __is_active_jprobe(unsigned long addr)
-{
-	if (!preemptible()) {
-		struct kprobe *p = raw_cpu_read(current_kprobe);
-		return (p && (unsigned long)p->addr == addr) ? 1 : 0;
-	}
-
-	return 0;
-}
-
 static nokprobe_inline
 int __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
 		      struct kprobe_ctlblk *kcb, unsigned long orig_nip)
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index e4c5bf33970b..600678fce0a8 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -611,60 +611,6 @@ unsigned long arch_deref_entry_point(void *entry)
 }
 NOKPROBE_SYMBOL(arch_deref_entry_point);
 
-int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs));
-
-	/* setup return addr to the jprobe handler routine */
-	regs->nip = arch_deref_entry_point(jp->entry);
-#ifdef PPC64_ELF_ABI_v2
-	regs->gpr[12] = (unsigned long)jp->entry;
-#elif defined(PPC64_ELF_ABI_v1)
-	regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc);
-#endif
-
-	/*
-	 * jprobes use jprobe_return() which skips the normal return
-	 * path of the function, and this messes up the accounting of the
-	 * function graph tracer.
-	 *
-	 * Pause function graph tracing while performing the jprobe function.
-	 */
-	pause_graph_tracing();
-
-	return 1;
-}
-NOKPROBE_SYMBOL(setjmp_pre_handler);
-
-void __used jprobe_return(void)
-{
-	asm volatile("jprobe_return_trap:\n"
-		     "trap\n"
-		     ::: "memory");
-}
-NOKPROBE_SYMBOL(jprobe_return);
-
-int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	if (regs->nip != ppc_kallsyms_lookup_name("jprobe_return_trap")) {
-		pr_debug("longjmp_break_handler NIP (0x%lx) does not match jprobe_return_trap (0x%lx)\n",
-				regs->nip, ppc_kallsyms_lookup_name("jprobe_return_trap"));
-		return 0;
-	}
-
-	memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs));
-	/* It's OK to start function graph tracing again */
-	unpause_graph_tracing();
-	preempt_enable_no_resched();
-	return 1;
-}
-NOKPROBE_SYMBOL(longjmp_break_handler);
-
 static struct kprobe trampoline_p = {
 	.addr = (kprobe_opcode_t *) &kretprobe_trampoline,
 	.pre_handler = trampoline_probe_handler
diff --git a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
index 9a5b5a513604..32476a6e4e9c 100644
--- a/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
+++ b/arch/powerpc/kernel/trace/ftrace_64_mprofile.S
@@ -104,39 +104,13 @@ ftrace_regs_call:
 	bl	ftrace_stub
 	nop
 
-	/* Load the possibly modified NIP */
-	ld	r15, _NIP(r1)
-
+	/* Load ctr with the possibly modified NIP */
+	ld	r3, _NIP(r1)
+	mtctr	r3
 #ifdef CONFIG_LIVEPATCH
-	cmpd	r14, r15	/* has NIP been altered? */
+	cmpd	r14, r3		/* has NIP been altered? */
 #endif
 
-#if defined(CONFIG_LIVEPATCH) && defined(CONFIG_KPROBES_ON_FTRACE)
-	/* NIP has not been altered, skip over further checks */
-	beq	1f
-
-	/* Check if there is an active jprobe on us */
-	subi	r3, r14, 4
-	bl	__is_active_jprobe
-	nop
-
-	/*
-	 * If r3 == 1, then this is a kprobe/jprobe.
-	 * else, this is livepatched function.
-	 *
-	 * The conditional branch for livepatch_handler below will use the
-	 * result of this comparison. For kprobe/jprobe, we just need to branch to
-	 * the new NIP, not call livepatch_handler. The branch below is bne, so we
-	 * want CR0[EQ] to be true if this is a kprobe/jprobe. Which means we want
-	 * CR0[EQ] = (r3 == 1).
-	 */
-	cmpdi	r3, 1
-1:
-#endif
-
-	/* Load CTR with the possibly modified NIP */
-	mtctr	r15
-
 	/* Restore gprs */
 	REST_GPR(0,r1)
 	REST_10GPRS(2,r1)
@@ -154,10 +128,7 @@ ftrace_regs_call:
 	addi r1, r1, SWITCH_FRAME_SIZE
 
 #ifdef CONFIG_LIVEPATCH
-        /*
-	 * Based on the cmpd or cmpdi above, if the NIP was altered and we're
-	 * not on a kprobe/jprobe, then handle livepatch.
-	 */
+        /* Based on the cmpd above, if the NIP was altered handle livepatch */
 	bne-	livepatch_handler
 #endif
 


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 08/27] ia64: kprobes: Remove jprobe implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (6 preceding siblings ...)
  2018-06-19 16:07 ` [PATCH -tip v6 07/27] powerpc/kprobes: Remove jprobe powerpc implementation Masami Hiramatsu
@ 2018-06-19 16:08 ` Masami Hiramatsu
  2018-06-19 16:08 ` [PATCH -tip v6 09/27] MIPS: " Masami Hiramatsu
                   ` (18 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:08 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Tony Luck, Fenghua Yu, linux-ia64

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/ia64.

Note that since ia64 jprobes code a bit different
from other arch, this keeps __IA64_BREAK_JPROBE
for checking break_handler. It will be removed
with break_handler() call afterwards.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
---
 arch/ia64/include/asm/kprobes.h |    2 -
 arch/ia64/kernel/Makefile       |    2 -
 arch/ia64/kernel/jprobes.S      |   90 ---------------------------------------
 arch/ia64/kernel/kprobes.c      |   70 ------------------------------
 4 files changed, 1 insertion(+), 163 deletions(-)
 delete mode 100644 arch/ia64/kernel/jprobes.S

diff --git a/arch/ia64/include/asm/kprobes.h b/arch/ia64/include/asm/kprobes.h
index 0302b3664789..580356a2eea6 100644
--- a/arch/ia64/include/asm/kprobes.h
+++ b/arch/ia64/include/asm/kprobes.h
@@ -82,8 +82,6 @@ struct prev_kprobe {
 #define ARCH_PREV_KPROBE_SZ 2
 struct kprobe_ctlblk {
 	unsigned long kprobe_status;
-	struct pt_regs jprobe_saved_regs;
-	unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE];
 	unsigned long *bsp;
 	unsigned long cfm;
 	atomic_t prev_kprobe_index;
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 498f3da3f225..d0c0ccdd656a 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_NUMA)		+= numa.o
 obj-$(CONFIG_PERFMON)		+= perfmon_default_smpl.o
 obj-$(CONFIG_IA64_CYCLONE)	+= cyclone.o
 obj-$(CONFIG_IA64_MCA_RECOVERY)	+= mca_recovery.o
-obj-$(CONFIG_KPROBES)		+= kprobes.o jprobes.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S
deleted file mode 100644
index f69389c7be1d..000000000000
--- a/arch/ia64/kernel/jprobes.S
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Jprobe specific operations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) Intel Corporation, 2005
- *
- * 2005-May     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
- *              <anil.s.keshavamurthy@intel.com> initial implementation
- *
- * Jprobes (a.k.a. "jump probes" which is built on-top of kprobes) allow a
- * probe to be inserted into the beginning of a function call.  The fundamental
- * difference between a jprobe and a kprobe is the jprobe handler is executed
- * in the same context as the target function, while the kprobe handlers
- * are executed in interrupt context.
- *
- * For jprobes we initially gain control by placing a break point in the
- * first instruction of the targeted function.  When we catch that specific
- * break, we:
- *        * set the return address to our jprobe_inst_return() function
- *        * jump to the jprobe handler function
- *
- * Since we fixed up the return address, the jprobe handler will return to our
- * jprobe_inst_return() function, giving us control again.  At this point we
- * are back in the parents frame marker, so we do yet another call to our
- * jprobe_break() function to fix up the frame marker as it would normally
- * exist in the target function.
- *
- * Our jprobe_return function then transfers control back to kprobes.c by
- * executing a break instruction using one of our reserved numbers.  When we
- * catch that break in kprobes.c, we continue like we do for a normal kprobe
- * by single stepping the emulated instruction, and then returning execution
- * to the correct location.
- */
-#include <asm/asmmacro.h>
-#include <asm/break.h>
-
-	/*
-	 * void jprobe_break(void)
-	 */
-	.section .kprobes.text, "ax"
-ENTRY(jprobe_break)
-	break.m __IA64_BREAK_JPROBE
-END(jprobe_break)
-
-	/*
-	 * void jprobe_inst_return(void)
-	 */
-GLOBAL_ENTRY(jprobe_inst_return)
-	br.call.sptk.many b0=jprobe_break
-END(jprobe_inst_return)
-
-GLOBAL_ENTRY(invalidate_stacked_regs)
-	movl r16=invalidate_restore_cfm
-	;;
-	mov b6=r16
-	;;
-	br.ret.sptk.many b6
-	;;
-invalidate_restore_cfm:
-	mov r16=ar.rsc
-	;;
-	mov ar.rsc=r0
-	;;
-	loadrs
-	;;
-	mov ar.rsc=r16
-	;;
-	br.cond.sptk.many rp
-END(invalidate_stacked_regs)
-
-GLOBAL_ENTRY(flush_register_stack)
-	// flush dirty regs to backing store (must be first in insn group)
-	flushrs
-	;;
-	br.ret.sptk.many rp
-END(flush_register_stack)
-
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index f5f3a5e6fcd1..823e4bd03a18 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -35,8 +35,6 @@
 #include <asm/sections.h>
 #include <asm/exception.h>
 
-extern void jprobe_inst_return(void);
-
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
@@ -1040,74 +1038,6 @@ unsigned long arch_deref_entry_point(void *entry)
 	return ((struct fnptr *)entry)->ip;
 }
 
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	unsigned long addr = arch_deref_entry_point(jp->entry);
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	struct param_bsp_cfm pa;
-	int bytes;
-
-	/*
-	 * Callee owns the argument space and could overwrite it, eg
-	 * tail call optimization. So to be absolutely safe
-	 * we save the argument space before transferring the control
-	 * to instrumented jprobe function which runs in
-	 * the process context
-	 */
-	pa.ip = regs->cr_iip;
-	unw_init_running(ia64_get_bsp_cfm, &pa);
-	bytes = (char *)ia64_rse_skip_regs(pa.bsp, pa.cfm & 0x3f)
-				- (char *)pa.bsp;
-	memcpy( kcb->jprobes_saved_stacked_regs,
-		pa.bsp,
-		bytes );
-	kcb->bsp = pa.bsp;
-	kcb->cfm = pa.cfm;
-
-	/* save architectural state */
-	kcb->jprobe_saved_regs = *regs;
-
-	/* after rfi, execute the jprobe instrumented function */
-	regs->cr_iip = addr & ~0xFULL;
-	ia64_psr(regs)->ri = addr & 0xf;
-	regs->r1 = ((struct fnptr *)(jp->entry))->gp;
-
-	/*
-	 * fix the return address to our jprobe_inst_return() function
-	 * in the jprobes.S file
-	 */
-	regs->b0 = ((struct fnptr *)(jprobe_inst_return))->ip;
-
-	return 1;
-}
-
-/* ia64 does not need this */
-void __kprobes jprobe_return(void)
-{
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	int bytes;
-
-	/* restoring architectural state */
-	*regs = kcb->jprobe_saved_regs;
-
-	/* restoring the original argument space */
-	flush_register_stack();
-	bytes = (char *)ia64_rse_skip_regs(kcb->bsp, kcb->cfm & 0x3f)
-				- (char *)kcb->bsp;
-	memcpy( kcb->bsp,
-		kcb->jprobes_saved_stacked_regs,
-		bytes );
-	invalidate_stacked_regs();
-
-	preempt_enable_no_resched();
-	return 1;
-}
-
 static struct kprobe trampoline_p = {
 	.pre_handler = trampoline_probe_handler
 };


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 09/27] MIPS: kprobes: Remove jprobe implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (7 preceding siblings ...)
  2018-06-19 16:08 ` [PATCH -tip v6 08/27] ia64: kprobes: Remove jprobe implementation Masami Hiramatsu
@ 2018-06-19 16:08 ` " Masami Hiramatsu
  2018-06-19 16:08 ` [PATCH -tip v6 10/27] s390/kprobes: " Masami Hiramatsu
                   ` (17 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:08 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Ralf Baechle, James Hogan, linux-mips

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/mips.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
---
 arch/mips/include/asm/kprobes.h |   13 -----------
 arch/mips/kernel/kprobes.c      |   45 ---------------------------------------
 2 files changed, 58 deletions(-)

diff --git a/arch/mips/include/asm/kprobes.h b/arch/mips/include/asm/kprobes.h
index ad1a99948f27..a72dfbf1babb 100644
--- a/arch/mips/include/asm/kprobes.h
+++ b/arch/mips/include/asm/kprobes.h
@@ -68,16 +68,6 @@ struct prev_kprobe {
 	unsigned long saved_epc;
 };
 
-#define MAX_JPROBES_STACK_SIZE 128
-#define MAX_JPROBES_STACK_ADDR \
-	(((unsigned long)current_thread_info()) + THREAD_SIZE - 32 - sizeof(struct pt_regs))
-
-#define MIN_JPROBES_STACK_SIZE(ADDR)					\
-	((((ADDR) + MAX_JPROBES_STACK_SIZE) > MAX_JPROBES_STACK_ADDR)	\
-		? MAX_JPROBES_STACK_ADDR - (ADDR)			\
-		: MAX_JPROBES_STACK_SIZE)
-
-
 #define SKIP_DELAYSLOT 0x0001
 
 /* per-cpu kprobe control block */
@@ -86,12 +76,9 @@ struct kprobe_ctlblk {
 	unsigned long kprobe_old_SR;
 	unsigned long kprobe_saved_SR;
 	unsigned long kprobe_saved_epc;
-	unsigned long jprobe_saved_sp;
-	struct pt_regs jprobe_saved_regs;
 	/* Per-thread fields, used while emulating branches */
 	unsigned long flags;
 	unsigned long target_epc;
-	u8 jprobes_stack[MAX_JPROBES_STACK_SIZE];
 	struct prev_kprobe prev_kprobe;
 };
 
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index f5c8bce70db2..efdcd0b1ce12 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -468,51 +468,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 	return ret;
 }
 
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	kcb->jprobe_saved_regs = *regs;
-	kcb->jprobe_saved_sp = regs->regs[29];
-
-	memcpy(kcb->jprobes_stack, (void *)kcb->jprobe_saved_sp,
-	       MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
-
-	regs->cp0_epc = (unsigned long)(jp->entry);
-
-	return 1;
-}
-
-/* Defined in the inline asm below. */
-void jprobe_return_end(void);
-
-void __kprobes jprobe_return(void)
-{
-	/* Assembler quirk necessitates this '0,code' business.	 */
-	asm volatile(
-		"break 0,%0\n\t"
-		".globl jprobe_return_end\n"
-		"jprobe_return_end:\n"
-		: : "n" (BRK_KPROBE_BP) : "memory");
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	if (regs->cp0_epc >= (unsigned long)jprobe_return &&
-	    regs->cp0_epc <= (unsigned long)jprobe_return_end) {
-		*regs = kcb->jprobe_saved_regs;
-		memcpy((void *)kcb->jprobe_saved_sp, kcb->jprobes_stack,
-		       MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
-		preempt_enable_no_resched();
-
-		return 1;
-	}
-	return 0;
-}
-
 /*
  * Function return probe trampoline:
  *	- init_kprobes() establishes a probepoint here


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 10/27] s390/kprobes: Remove jprobe implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (8 preceding siblings ...)
  2018-06-19 16:08 ` [PATCH -tip v6 09/27] MIPS: " Masami Hiramatsu
@ 2018-06-19 16:08 ` " Masami Hiramatsu
  2018-06-19 16:09 ` [PATCH -tip v6 11/27] sh: kprobes: " Masami Hiramatsu
                   ` (16 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:08 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Martin Schwidefsky, Heiko Carstens, linux-s390

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/s390.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
---
 arch/s390/include/asm/kprobes.h |    2 -
 arch/s390/kernel/kprobes.c      |   59 +--------------------------------------
 2 files changed, 2 insertions(+), 59 deletions(-)

diff --git a/arch/s390/include/asm/kprobes.h b/arch/s390/include/asm/kprobes.h
index 13de80cf741c..b106aa29bf55 100644
--- a/arch/s390/include/asm/kprobes.h
+++ b/arch/s390/include/asm/kprobes.h
@@ -68,8 +68,6 @@ struct kprobe_ctlblk {
 	unsigned long kprobe_saved_imask;
 	unsigned long kprobe_saved_ctl[3];
 	struct prev_kprobe prev_kprobe;
-	struct pt_regs jprobe_saved_regs;
-	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
 };
 
 void arch_remove_kprobe(struct kprobe *p);
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 60f60afa645c..0967de19f53d 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -321,9 +321,8 @@ static int kprobe_handler(struct pt_regs *regs)
 			 * If we have no pre-handler or it returned 0, we
 			 * continue with single stepping. If we have a
 			 * pre-handler and it returned non-zero, it prepped
-			 * for calling the break_handler below on re-entry
-			 * for jprobe processing, so get out doing nothing
-			 * more here.
+			 * for changing execution path, so get out doing
+			 * nothing more here.
 			 */
 			push_kprobe(kcb, p);
 			kcb->kprobe_status = KPROBE_HIT_ACTIVE;
@@ -661,60 +660,6 @@ int kprobe_exceptions_notify(struct notifier_block *self,
 }
 NOKPROBE_SYMBOL(kprobe_exceptions_notify);
 
-int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long stack;
-
-	memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs));
-
-	/* setup return addr to the jprobe handler routine */
-	regs->psw.addr = (unsigned long) jp->entry;
-	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
-
-	/* r15 is the stack pointer */
-	stack = (unsigned long) regs->gprs[15];
-
-	memcpy(kcb->jprobes_stack, (void *) stack, MIN_STACK_SIZE(stack));
-
-	/*
-	 * jprobes use jprobe_return() which skips the normal return
-	 * path of the function, and this messes up the accounting of the
-	 * function graph tracer to get messed up.
-	 *
-	 * Pause function graph tracing while performing the jprobe function.
-	 */
-	pause_graph_tracing();
-	return 1;
-}
-NOKPROBE_SYMBOL(setjmp_pre_handler);
-
-void jprobe_return(void)
-{
-	asm volatile(".word 0x0002");
-}
-NOKPROBE_SYMBOL(jprobe_return);
-
-int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long stack;
-
-	/* It's OK to start function graph tracing again */
-	unpause_graph_tracing();
-
-	stack = (unsigned long) kcb->jprobe_saved_regs.gprs[15];
-
-	/* Put the regs back */
-	memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs));
-	/* put the stack back */
-	memcpy((void *) stack, kcb->jprobes_stack, MIN_STACK_SIZE(stack));
-	preempt_enable_no_resched();
-	return 1;
-}
-NOKPROBE_SYMBOL(longjmp_break_handler);
-
 static struct kprobe trampoline = {
 	.addr = (kprobe_opcode_t *) &kretprobe_trampoline,
 	.pre_handler = trampoline_probe_handler


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 11/27] sh: kprobes: Remove jprobe implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (9 preceding siblings ...)
  2018-06-19 16:08 ` [PATCH -tip v6 10/27] s390/kprobes: " Masami Hiramatsu
@ 2018-06-19 16:09 ` " Masami Hiramatsu
  2018-06-19 16:09 ` [PATCH -tip v6 12/27] sparc64: " Masami Hiramatsu
                   ` (15 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:09 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Yoshinori Sato, Rich Felker, linux-sh

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/sh.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
---
 arch/sh/include/asm/kprobes.h |    4 ---
 arch/sh/kernel/kprobes.c      |   51 -----------------------------------------
 2 files changed, 55 deletions(-)

diff --git a/arch/sh/include/asm/kprobes.h b/arch/sh/include/asm/kprobes.h
index 85d8bcaa8493..6171682f7798 100644
--- a/arch/sh/include/asm/kprobes.h
+++ b/arch/sh/include/asm/kprobes.h
@@ -27,7 +27,6 @@ struct kprobe;
 
 void arch_remove_kprobe(struct kprobe *);
 void kretprobe_trampoline(void);
-void jprobe_return_end(void);
 
 /* Architecture specific copy of original instruction*/
 struct arch_specific_insn {
@@ -43,9 +42,6 @@ struct prev_kprobe {
 /* per-cpu kprobe control block */
 struct kprobe_ctlblk {
 	unsigned long kprobe_status;
-	unsigned long jprobe_saved_r15;
-	struct pt_regs jprobe_saved_regs;
-	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
 	struct prev_kprobe prev_kprobe;
 };
 
diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c
index 52a5e11247d1..2b5e58873b96 100644
--- a/arch/sh/kernel/kprobes.c
+++ b/arch/sh/kernel/kprobes.c
@@ -523,57 +523,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 	return ret;
 }
 
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	unsigned long addr;
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	kcb->jprobe_saved_regs = *regs;
-	kcb->jprobe_saved_r15 = regs->regs[15];
-	addr = kcb->jprobe_saved_r15;
-
-	/*
-	 * TBD: As Linus pointed out, gcc assumes that the callee
-	 * owns the argument space and could overwrite it, e.g.
-	 * tailcall optimization. So, to be absolutely safe
-	 * we also save and restore enough stack bytes to cover
-	 * the argument area.
-	 */
-	memcpy(kcb->jprobes_stack, (kprobe_opcode_t *) addr,
-	       MIN_STACK_SIZE(addr));
-
-	regs->pc = (unsigned long)(jp->entry);
-
-	return 1;
-}
-
-void __kprobes jprobe_return(void)
-{
-	asm volatile ("trapa #0x3a\n\t" "jprobe_return_end:\n\t" "nop\n\t");
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long stack_addr = kcb->jprobe_saved_r15;
-	u8 *addr = (u8 *)regs->pc;
-
-	if ((addr >= (u8 *)jprobe_return) &&
-	    (addr <= (u8 *)jprobe_return_end)) {
-		*regs = kcb->jprobe_saved_regs;
-
-		memcpy((kprobe_opcode_t *)stack_addr, kcb->jprobes_stack,
-		       MIN_STACK_SIZE(stack_addr));
-
-		kcb->kprobe_status = KPROBE_HIT_SS;
-		preempt_enable_no_resched();
-		return 1;
-	}
-
-	return 0;
-}
-
 static struct kprobe trampoline_p = {
 	.addr = (kprobe_opcode_t *)&kretprobe_trampoline,
 	.pre_handler = trampoline_probe_handler


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 12/27] sparc64: kprobes: Remove jprobe implementation
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (10 preceding siblings ...)
  2018-06-19 16:09 ` [PATCH -tip v6 11/27] sh: kprobes: " Masami Hiramatsu
@ 2018-06-19 16:09 ` " Masami Hiramatsu
  2018-06-19 16:10 ` [PATCH -tip v6 13/27] kprobes: Don't check the ->break_handler() in generic kprobes code Masami Hiramatsu
                   ` (14 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:09 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, David S. Miller, sparclinux

Remove arch dependent setjump/longjump functions
and unused fields in kprobe_ctlblk for jprobes
from arch/sparc.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
---
 arch/sparc/include/asm/kprobes.h |    1 -
 arch/sparc/kernel/kprobes.c      |   47 --------------------------------------
 2 files changed, 48 deletions(-)

diff --git a/arch/sparc/include/asm/kprobes.h b/arch/sparc/include/asm/kprobes.h
index 3704490b4488..bfcaa6326c20 100644
--- a/arch/sparc/include/asm/kprobes.h
+++ b/arch/sparc/include/asm/kprobes.h
@@ -44,7 +44,6 @@ struct kprobe_ctlblk {
 	unsigned long kprobe_status;
 	unsigned long kprobe_orig_tnpc;
 	unsigned long kprobe_orig_tstate_pil;
-	struct pt_regs jprobe_saved_regs;
 	struct prev_kprobe prev_kprobe;
 };
 
diff --git a/arch/sparc/kernel/kprobes.c b/arch/sparc/kernel/kprobes.c
index ab4ba4347941..f555711da8f1 100644
--- a/arch/sparc/kernel/kprobes.c
+++ b/arch/sparc/kernel/kprobes.c
@@ -441,53 +441,6 @@ asmlinkage void __kprobes kprobe_trap(unsigned long trap_level,
 	exception_exit(prev_state);
 }
 
-/* Jprobes support.  */
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs));
-
-	regs->tpc  = (unsigned long) jp->entry;
-	regs->tnpc = ((unsigned long) jp->entry) + 0x4UL;
-	regs->tstate |= TSTATE_PIL;
-
-	return 1;
-}
-
-void __kprobes jprobe_return(void)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	register unsigned long orig_fp asm("g1");
-
-	orig_fp = kcb->jprobe_saved_regs.u_regs[UREG_FP];
-	__asm__ __volatile__("\n"
-"1:	cmp		%%sp, %0\n\t"
-	"blu,a,pt	%%xcc, 1b\n\t"
-	" restore\n\t"
-	".globl		jprobe_return_trap_instruction\n"
-"jprobe_return_trap_instruction:\n\t"
-	"ta		0x70"
-	: /* no outputs */
-	: "r" (orig_fp));
-}
-
-extern void jprobe_return_trap_instruction(void);
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	u32 *addr = (u32 *) regs->tpc;
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	if (addr == (u32 *) jprobe_return_trap_instruction) {
-		memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs));
-		preempt_enable_no_resched();
-		return 1;
-	}
-	return 0;
-}
-
 /* The value stored in the return address register is actually 2
  * instructions before where the callee will return to.
  * Sequences usually look something like this


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 13/27] kprobes: Don't check the ->break_handler() in generic kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (11 preceding siblings ...)
  2018-06-19 16:09 ` [PATCH -tip v6 12/27] sparc64: " Masami Hiramatsu
@ 2018-06-19 16:10 ` Masami Hiramatsu
  2018-06-19 16:10 ` [PATCH -tip v6 14/27] kprobes/x86: Don't call ->break_handler() in x86 kprobes Masami Hiramatsu
                   ` (13 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:10 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch

Don't check the ->break_handler() from the core kprobes code,
because it was only used by jprobes which got removed.

( In followup patches we'll remove the remaining calls in low level
  arch handlers as well and remove the callback altogether. )

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 Documentation/kprobes.txt |    2 +-
 kernel/kprobes.c          |   39 +++++----------------------------------
 2 files changed, 6 insertions(+), 35 deletions(-)

diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 5ae80baf3921..907a3017c0f2 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -262,7 +262,7 @@ is optimized, that modification is ignored.  Thus, if you want to
 tweak the kernel's execution path, you need to suppress optimization,
 using one of the following techniques:
 
-- Specify an empty function for the kprobe's post_handler or break_handler.
+- Specify an empty function for the kprobe's post_handler.
 
 or
 
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 69de130595f7..536ab451e96d 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -627,8 +627,8 @@ static void optimize_kprobe(struct kprobe *p)
 	    (kprobe_disabled(p) || kprobes_all_disarmed))
 		return;
 
-	/* Both of break_handler and post_handler are not supported. */
-	if (p->break_handler || p->post_handler)
+	/* kprobes with post_handler can not be optimized */
+	if (p->post_handler)
 		return;
 
 	op = container_of(p, struct optimized_kprobe, kp);
@@ -1116,20 +1116,6 @@ static int aggr_fault_handler(struct kprobe *p, struct pt_regs *regs,
 }
 NOKPROBE_SYMBOL(aggr_fault_handler);
 
-static int aggr_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe *cur = __this_cpu_read(kprobe_instance);
-	int ret = 0;
-
-	if (cur && cur->break_handler) {
-		if (cur->break_handler(cur, regs))
-			ret = 1;
-	}
-	reset_kprobe_instance();
-	return ret;
-}
-NOKPROBE_SYMBOL(aggr_break_handler);
-
 /* Walks the list and increments nmissed count for multiprobe case */
 void kprobes_inc_nmissed_count(struct kprobe *p)
 {
@@ -1270,24 +1256,15 @@ static void cleanup_rp_inst(struct kretprobe *rp)
 }
 NOKPROBE_SYMBOL(cleanup_rp_inst);
 
-/*
-* Add the new probe to ap->list. Fail if this is the
-* second break_handler at the address
-*/
+/* Add the new probe to ap->list */
 static int add_new_kprobe(struct kprobe *ap, struct kprobe *p)
 {
 	BUG_ON(kprobe_gone(ap) || kprobe_gone(p));
 
-	if (p->break_handler || p->post_handler)
+	if (p->post_handler)
 		unoptimize_kprobe(ap, true);	/* Fall back to normal kprobe */
 
-	if (p->break_handler) {
-		if (ap->break_handler)
-			return -EEXIST;
-		list_add_tail_rcu(&p->list, &ap->list);
-		ap->break_handler = aggr_break_handler;
-	} else
-		list_add_rcu(&p->list, &ap->list);
+	list_add_rcu(&p->list, &ap->list);
 	if (p->post_handler && !ap->post_handler)
 		ap->post_handler = aggr_post_handler;
 
@@ -1310,8 +1287,6 @@ static void init_aggr_kprobe(struct kprobe *ap, struct kprobe *p)
 	/* We don't care the kprobe which has gone. */
 	if (p->post_handler && !kprobe_gone(p))
 		ap->post_handler = aggr_post_handler;
-	if (p->break_handler && !kprobe_gone(p))
-		ap->break_handler = aggr_break_handler;
 
 	INIT_LIST_HEAD(&ap->list);
 	INIT_HLIST_NODE(&ap->hlist);
@@ -1706,8 +1681,6 @@ static int __unregister_kprobe_top(struct kprobe *p)
 		goto disarmed;
 	else {
 		/* If disabling probe has special handlers, update aggrprobe */
-		if (p->break_handler && !kprobe_gone(p))
-			ap->break_handler = NULL;
 		if (p->post_handler && !kprobe_gone(p)) {
 			list_for_each_entry_rcu(list_p, &ap->list, list) {
 				if ((list_p != p) && (list_p->post_handler))
@@ -1911,7 +1884,6 @@ int register_kretprobe(struct kretprobe *rp)
 	rp->kp.pre_handler = pre_handler_kretprobe;
 	rp->kp.post_handler = NULL;
 	rp->kp.fault_handler = NULL;
-	rp->kp.break_handler = NULL;
 
 	/* Pre-allocate memory for max kretprobe instances */
 	if (rp->maxactive <= 0) {
@@ -2034,7 +2006,6 @@ static void kill_kprobe(struct kprobe *p)
 		list_for_each_entry_rcu(kp, &p->list, list)
 			kp->flags |= KPROBE_FLAG_GONE;
 		p->post_handler = NULL;
-		p->break_handler = NULL;
 		kill_optimized_kprobe(p);
 	}
 	/*


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 14/27] kprobes/x86: Don't call ->break_handler() in x86 kprobes
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (12 preceding siblings ...)
  2018-06-19 16:10 ` [PATCH -tip v6 13/27] kprobes: Don't check the ->break_handler() in generic kprobes code Masami Hiramatsu
@ 2018-06-19 16:10 ` Masami Hiramatsu
  2018-06-19 16:11 ` [PATCH -tip v6 15/27] ARC: kprobes: Don't call the ->break_handler() in ARC kprobes code Masami Hiramatsu
                   ` (12 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:10 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, x86

Don't call ->break_handler() and remove break_handler
related code from x86 since that was only used by jprobe
which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
---
 Changes in v6:
  - Move post handler emulation code into kprobe_ftrace_handler()
---
 arch/x86/include/asm/kprobes.h   |    2 +-
 arch/x86/kernel/kprobes/common.h |   10 ---------
 arch/x86/kernel/kprobes/core.c   |    7 ------
 arch/x86/kernel/kprobes/ftrace.c |   42 ++++++++++----------------------------
 4 files changed, 12 insertions(+), 49 deletions(-)

diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h
index 06782c2efa04..c8cec1b39b88 100644
--- a/arch/x86/include/asm/kprobes.h
+++ b/arch/x86/include/asm/kprobes.h
@@ -78,7 +78,7 @@ struct arch_specific_insn {
 	 * boostable = true: This instruction has been boosted: we have
 	 * added a relative jump after the instruction copy in insn,
 	 * so no single-step and fixup are needed (unless there's
-	 * a post_handler or break_handler).
+	 * a post_handler).
 	 */
 	bool boostable;
 	bool if_modifier;
diff --git a/arch/x86/kernel/kprobes/common.h b/arch/x86/kernel/kprobes/common.h
index ae38dccf0c8f..2b949f4fd4d8 100644
--- a/arch/x86/kernel/kprobes/common.h
+++ b/arch/x86/kernel/kprobes/common.h
@@ -105,14 +105,4 @@ static inline unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsig
 }
 #endif
 
-#ifdef CONFIG_KPROBES_ON_FTRACE
-extern int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
-			   struct kprobe_ctlblk *kcb);
-#else
-static inline int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
-				  struct kprobe_ctlblk *kcb)
-{
-	return 0;
-}
-#endif
 #endif
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 1b2d1acba810..0ac16a0d93e5 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -709,13 +709,6 @@ int kprobe_int3_handler(struct pt_regs *regs)
 		regs->ip = (unsigned long)addr;
 		preempt_enable_no_resched();
 		return 1;
-	} else if (kprobe_running()) {
-		p = __this_cpu_read(current_kprobe);
-		if (p->break_handler && p->break_handler(p, regs)) {
-			if (!skip_singlestep(p, regs, kcb))
-				setup_singlestep(p, regs, kcb, 0);
-			return 1;
-		}
 	} /* else: not a kprobe fault; let the kernel handle it */
 
 	preempt_enable_no_resched();
diff --git a/arch/x86/kernel/kprobes/ftrace.c b/arch/x86/kernel/kprobes/ftrace.c
index 8dc0161cec8f..02a6dd1b6bd0 100644
--- a/arch/x86/kernel/kprobes/ftrace.c
+++ b/arch/x86/kernel/kprobes/ftrace.c
@@ -25,36 +25,6 @@
 
 #include "common.h"
 
-static nokprobe_inline
-void __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
-		      struct kprobe_ctlblk *kcb, unsigned long orig_ip)
-{
-	/*
-	 * Emulate singlestep (and also recover regs->ip)
-	 * as if there is a 5byte nop
-	 */
-	regs->ip = (unsigned long)p->addr + MCOUNT_INSN_SIZE;
-	if (unlikely(p->post_handler)) {
-		kcb->kprobe_status = KPROBE_HIT_SSDONE;
-		p->post_handler(p, regs, 0);
-	}
-	__this_cpu_write(current_kprobe, NULL);
-	if (orig_ip)
-		regs->ip = orig_ip;
-}
-
-int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
-		    struct kprobe_ctlblk *kcb)
-{
-	if (kprobe_ftrace(p)) {
-		__skip_singlestep(p, regs, kcb, 0);
-		preempt_enable_no_resched();
-		return 1;
-	}
-	return 0;
-}
-NOKPROBE_SYMBOL(skip_singlestep);
-
 /* Ftrace callback handler for kprobes -- called under preepmt disabed */
 void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
 			   struct ftrace_ops *ops, struct pt_regs *regs)
@@ -80,7 +50,17 @@ void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
 		__this_cpu_write(current_kprobe, p);
 		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 		if (!p->pre_handler || !p->pre_handler(p, regs)) {
-			__skip_singlestep(p, regs, kcb, orig_ip);
+			/*
+			 * Emulate singlestep (and also recover regs->ip)
+			 * as if there is a 5byte nop
+			 */
+			regs->ip = (unsigned long)p->addr + MCOUNT_INSN_SIZE;
+			if (unlikely(p->post_handler)) {
+				kcb->kprobe_status = KPROBE_HIT_SSDONE;
+				p->post_handler(p, regs, 0);
+			}
+			regs->ip = orig_ip;
+			__this_cpu_write(current_kprobe, NULL);
 			preempt_enable_no_resched();
 		}
 		/*


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 15/27] ARC: kprobes: Don't call the ->break_handler() in ARC kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (13 preceding siblings ...)
  2018-06-19 16:10 ` [PATCH -tip v6 14/27] kprobes/x86: Don't call ->break_handler() in x86 kprobes Masami Hiramatsu
@ 2018-06-19 16:11 ` Masami Hiramatsu
  2018-06-19 16:11 ` [PATCH -tip v6 16/27] ARM: kprobes: Don't call the ->break_handler() in arm " Masami Hiramatsu
                   ` (11 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:11 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Vineet Gupta, linux-snps-arc

Don't call the ->break_handler() from the ARC kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
---
 arch/arc/kernel/kprobes.c |    7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
index 7811a6bbe8f0..465365696c91 100644
--- a/arch/arc/kernel/kprobes.c
+++ b/arch/arc/kernel/kprobes.c
@@ -234,13 +234,6 @@ int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 		}
 
 		return 1;
-	} else if (kprobe_running()) {
-		p = __this_cpu_read(current_kprobe);
-		if (p->break_handler && p->break_handler(p, regs)) {
-			setup_singlestep(p, regs);
-			kcb->kprobe_status = KPROBE_HIT_SS;
-			return 1;
-		}
 	}
 
 	/* no_kprobe: */


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 16/27] ARM: kprobes: Don't call the ->break_handler() in arm kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (14 preceding siblings ...)
  2018-06-19 16:11 ` [PATCH -tip v6 15/27] ARC: kprobes: Don't call the ->break_handler() in ARC kprobes code Masami Hiramatsu
@ 2018-06-19 16:11 ` " Masami Hiramatsu
  2018-06-19 16:12 ` [PATCH -tip v6 17/27] arm64: kprobes: Don't call the ->break_handler() in arm64 " Masami Hiramatsu
                   ` (10 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:11 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Russell King, linux-arm-kernel

Don't call the ->break_handler() from the arm kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm/probes/kprobes/core.c |   11 -----------
 1 file changed, 11 deletions(-)

diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c
index 23562111c511..3192350f389d 100644
--- a/arch/arm/probes/kprobes/core.c
+++ b/arch/arm/probes/kprobes/core.c
@@ -315,17 +315,6 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
 				reset_current_kprobe();
 			}
 		}
-	} else if (cur) {
-		/* We probably hit a jprobe.  Call its break handler. */
-		if (cur->break_handler && cur->break_handler(cur, regs)) {
-			kcb->kprobe_status = KPROBE_HIT_SS;
-			singlestep(cur, regs, kcb);
-			if (cur->post_handler) {
-				kcb->kprobe_status = KPROBE_HIT_SSDONE;
-				cur->post_handler(cur, regs, 0);
-			}
-		}
-		reset_current_kprobe();
 	} else {
 		/*
 		 * The probe was removed and a race is in progress.


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 17/27] arm64: kprobes: Don't call the ->break_handler() in arm64 kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (15 preceding siblings ...)
  2018-06-19 16:11 ` [PATCH -tip v6 16/27] ARM: kprobes: Don't call the ->break_handler() in arm " Masami Hiramatsu
@ 2018-06-19 16:12 ` " Masami Hiramatsu
  2018-06-19 16:12 ` [PATCH -tip v6 18/27] powerpc/kprobes: Don't call the ->break_handler() in powerpc " Masami Hiramatsu
                   ` (9 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:12 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Catalin Marinas, linux-arm-kernel

Don't call the ->break_handler() from the arm64 kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/kernel/probes/kprobes.c |    8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index 3ca2351109a6..076c3c0775a6 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -408,14 +408,6 @@ static void __kprobes kprobe_handler(struct pt_regs *regs)
 				return;
 			}
 		}
-	} else if ((le32_to_cpu(*(kprobe_opcode_t *) addr) ==
-	    BRK64_OPCODE_KPROBES) && cur_kprobe) {
-		/* We probably hit a jprobe.  Call its break handler. */
-		if (cur_kprobe->break_handler  &&
-		     cur_kprobe->break_handler(cur_kprobe, regs)) {
-			setup_singlestep(cur_kprobe, regs, kcb, 0);
-			return;
-		}
 	}
 	/*
 	 * The breakpoint instruction was removed right


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 18/27] powerpc/kprobes: Don't call the ->break_handler() in powerpc kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (16 preceding siblings ...)
  2018-06-19 16:12 ` [PATCH -tip v6 17/27] arm64: kprobes: Don't call the ->break_handler() in arm64 " Masami Hiramatsu
@ 2018-06-19 16:12 ` " Masami Hiramatsu
  2018-06-19 16:13 ` [PATCH -tip v6 19/27] ia64: kprobes: Don't call the ->break_handler() in ia64 " Masami Hiramatsu
                   ` (8 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:12 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Benjamin Herrenschmidt, Paul Mackerras,
	Michael Ellerman, linuxppc-dev

Don't call the ->break_handler() from the powerpc kprobes code,
because it was only used by jprobes which got removed.

This also removes skip_singlestep() and embeds it in the
caller, kprobe_ftrace_handler(), which simplifies regs->nip
operation around there.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
---
 Changes in v6
   - Fix patch description
   - Move post handler emulation into kprobe_ftrace_handler().
---
 arch/powerpc/include/asm/kprobes.h   |   10 -------
 arch/powerpc/kernel/kprobes-ftrace.c |   46 +++++++++-------------------------
 arch/powerpc/kernel/kprobes.c        |   31 ++++++++---------------
 3 files changed, 23 insertions(+), 64 deletions(-)

diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
index 674036db558b..785c464b6588 100644
--- a/arch/powerpc/include/asm/kprobes.h
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -102,16 +102,6 @@ extern int kprobe_exceptions_notify(struct notifier_block *self,
 extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
 extern int kprobe_handler(struct pt_regs *regs);
 extern int kprobe_post_handler(struct pt_regs *regs);
-#ifdef CONFIG_KPROBES_ON_FTRACE
-extern int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
-			   struct kprobe_ctlblk *kcb);
-#else
-static inline int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
-				  struct kprobe_ctlblk *kcb)
-{
-	return 0;
-}
-#endif
 #else
 static inline int kprobe_handler(struct pt_regs *regs) { return 0; }
 static inline int kprobe_post_handler(struct pt_regs *regs) { return 0; }
diff --git a/arch/powerpc/kernel/kprobes-ftrace.c b/arch/powerpc/kernel/kprobes-ftrace.c
index 1b316331c2d9..070d1d862444 100644
--- a/arch/powerpc/kernel/kprobes-ftrace.c
+++ b/arch/powerpc/kernel/kprobes-ftrace.c
@@ -25,35 +25,6 @@
 #include <linux/preempt.h>
 #include <linux/ftrace.h>
 
-static nokprobe_inline
-int __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
-		      struct kprobe_ctlblk *kcb, unsigned long orig_nip)
-{
-	/*
-	 * Emulate singlestep (and also recover regs->nip)
-	 * as if there is a nop
-	 */
-	regs->nip = (unsigned long)p->addr + MCOUNT_INSN_SIZE;
-	if (unlikely(p->post_handler)) {
-		kcb->kprobe_status = KPROBE_HIT_SSDONE;
-		p->post_handler(p, regs, 0);
-	}
-	__this_cpu_write(current_kprobe, NULL);
-	if (orig_nip)
-		regs->nip = orig_nip;
-	return 1;
-}
-
-int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
-		    struct kprobe_ctlblk *kcb)
-{
-	if (kprobe_ftrace(p))
-		return __skip_singlestep(p, regs, kcb, 0);
-	else
-		return 0;
-}
-NOKPROBE_SYMBOL(skip_singlestep);
-
 /* Ftrace callback handler for kprobes */
 void kprobe_ftrace_handler(unsigned long nip, unsigned long parent_nip,
 			   struct ftrace_ops *ops, struct pt_regs *regs)
@@ -71,8 +42,6 @@ void kprobe_ftrace_handler(unsigned long nip, unsigned long parent_nip,
 	if (kprobe_running()) {
 		kprobes_inc_nmissed_count(p);
 	} else {
-		unsigned long orig_nip = regs->nip;
-
 		/*
 		 * On powerpc, NIP is *before* this instruction for the
 		 * pre handler
@@ -81,9 +50,18 @@ void kprobe_ftrace_handler(unsigned long nip, unsigned long parent_nip,
 
 		__this_cpu_write(current_kprobe, p);
 		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-		if (!p->pre_handler || !p->pre_handler(p, regs))
-			__skip_singlestep(p, regs, kcb, orig_nip);
-		else {
+		if (!p->pre_handler || !p->pre_handler(p, regs)) {
+			/*
+			 * Emulate singlestep (and also recover regs->nip)
+			 * as if there is a nop
+			 */
+			regs->nip += MCOUNT_INSN_SIZE;
+			if (unlikely(p->post_handler)) {
+				kcb->kprobe_status = KPROBE_HIT_SSDONE;
+				p->post_handler(p, regs, 0);
+			}
+			__this_cpu_write(current_kprobe, NULL);
+		} else {
 			/*
 			 * If pre_handler returns !0, it sets regs->nip and
 			 * resets current kprobe. In this case, we should not
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 600678fce0a8..f06747e2e70d 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -317,25 +317,17 @@ int kprobe_handler(struct pt_regs *regs)
 			}
 			prepare_singlestep(p, regs);
 			return 1;
-		} else {
-			if (*addr != BREAKPOINT_INSTRUCTION) {
-				/* If trap variant, then it belongs not to us */
-				kprobe_opcode_t cur_insn = *addr;
-				if (is_trap(cur_insn))
-		       			goto no_kprobe;
-				/* The breakpoint instruction was removed by
-				 * another cpu right after we hit, no further
-				 * handling of this interrupt is appropriate
-				 */
-				ret = 1;
+		} else if (*addr != BREAKPOINT_INSTRUCTION) {
+			/* If trap variant, then it belongs not to us */
+			kprobe_opcode_t cur_insn = *addr;
+
+			if (is_trap(cur_insn))
 				goto no_kprobe;
-			}
-			p = __this_cpu_read(current_kprobe);
-			if (p->break_handler && p->break_handler(p, regs)) {
-				if (!skip_singlestep(p, regs, kcb))
-					goto ss_probe;
-				ret = 1;
-			}
+			/* The breakpoint instruction was removed by
+			 * another cpu right after we hit, no further
+			 * handling of this interrupt is appropriate
+			 */
+			ret = 1;
 		}
 		goto no_kprobe;
 	}
@@ -350,7 +342,7 @@ int kprobe_handler(struct pt_regs *regs)
 			 */
 			kprobe_opcode_t cur_insn = *addr;
 			if (is_trap(cur_insn))
-		       		goto no_kprobe;
+				goto no_kprobe;
 			/*
 			 * The breakpoint instruction was removed right
 			 * after we hit it.  Another cpu has removed
@@ -370,7 +362,6 @@ int kprobe_handler(struct pt_regs *regs)
 		/* handler has already set things up, so skip ss setup */
 		return 1;
 
-ss_probe:
 	if (p->ainsn.boostable >= 0) {
 		ret = try_to_emulate(p, regs);
 


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 19/27] ia64: kprobes: Don't call the ->break_handler() in ia64 kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (17 preceding siblings ...)
  2018-06-19 16:12 ` [PATCH -tip v6 18/27] powerpc/kprobes: Don't call the ->break_handler() in powerpc " Masami Hiramatsu
@ 2018-06-19 16:13 ` " Masami Hiramatsu
  2018-06-19 16:13 ` [PATCH -tip v6 20/27] MIPS: kprobes: Don't call the ->break_handler() in MIPS " Masami Hiramatsu
                   ` (7 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:13 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Tony Luck, Fenghua Yu, linux-ia64

Don't call the ->break_handler() from the ia64 kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
---
 arch/ia64/include/uapi/asm/break.h |    1 -
 arch/ia64/kernel/kprobes.c         |   10 ----------
 2 files changed, 11 deletions(-)

diff --git a/arch/ia64/include/uapi/asm/break.h b/arch/ia64/include/uapi/asm/break.h
index 5d742bcb0018..4ca110f0a94b 100644
--- a/arch/ia64/include/uapi/asm/break.h
+++ b/arch/ia64/include/uapi/asm/break.h
@@ -14,7 +14,6 @@
  */
 #define __IA64_BREAK_KDB		0x80100
 #define __IA64_BREAK_KPROBE		0x81000 /* .. 0x81fff */
-#define __IA64_BREAK_JPROBE		0x82000
 
 /*
  * OS-specific break numbers:
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 823e4bd03a18..74c8524e6309 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -817,14 +817,6 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 			prepare_ss(p, regs);
 			kcb->kprobe_status = KPROBE_REENTER;
 			return 1;
-		} else if (args->err == __IA64_BREAK_JPROBE) {
-			/*
-			 * jprobe instrumented function just completed
-			 */
-			p = __this_cpu_read(current_kprobe);
-			if (p->break_handler && p->break_handler(p, regs)) {
-				goto ss_probe;
-			}
 		} else if (!is_ia64_break_inst(regs)) {
 			/* The breakpoint instruction was removed by
 			 * another cpu right after we hit, no further
@@ -867,7 +859,6 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 		 */
 		return 1;
 
-ss_probe:
 #if !defined(CONFIG_PREEMPT)
 	if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
 		/* Boost up -- we can execute copied instructions directly */
@@ -990,7 +981,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 	case DIE_BREAK:
 		/* err is break number from ia64_bad_break() */
 		if ((args->err >> 12) == (__IA64_BREAK_KPROBE >> 12)
-			|| args->err == __IA64_BREAK_JPROBE
 			|| args->err == 0)
 			if (pre_kprobes_handler(args))
 				ret = NOTIFY_STOP;


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 20/27] MIPS: kprobes: Don't call the ->break_handler() in MIPS kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (18 preceding siblings ...)
  2018-06-19 16:13 ` [PATCH -tip v6 19/27] ia64: kprobes: Don't call the ->break_handler() in ia64 " Masami Hiramatsu
@ 2018-06-19 16:13 ` " Masami Hiramatsu
  2018-06-19 16:14 ` [PATCH -tip v6 21/27] s390/kprobes: Don't call the ->break_handler() in s390 " Masami Hiramatsu
                   ` (6 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:13 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Ralf Baechle, James Hogan, linux-mips

Don't call the ->break_handler() from the MIPS kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
---
 arch/mips/kernel/kprobes.c |   21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index efdcd0b1ce12..7fd277bc59b9 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -326,19 +326,13 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 				preempt_enable_no_resched();
 			}
 			return 1;
-		} else {
-			if (addr->word != breakpoint_insn.word) {
-				/*
-				 * The breakpoint instruction was removed by
-				 * another cpu right after we hit, no further
-				 * handling of this interrupt is appropriate
-				 */
-				ret = 1;
-				goto no_kprobe;
-			}
-			p = __this_cpu_read(current_kprobe);
-			if (p->break_handler && p->break_handler(p, regs))
-				goto ss_probe;
+		} else if (addr->word != breakpoint_insn.word) {
+			/*
+			 * The breakpoint instruction was removed by
+			 * another cpu right after we hit, no further
+			 * handling of this interrupt is appropriate
+			 */
+			ret = 1;
 		}
 		goto no_kprobe;
 	}
@@ -367,7 +361,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		return 1;
 	}
 
-ss_probe:
 	prepare_singlestep(p, regs, kcb);
 	if (kcb->flags & SKIP_DELAYSLOT) {
 		kcb->kprobe_status = KPROBE_HIT_SSDONE;


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 21/27] s390/kprobes: Don't call the ->break_handler() in s390 kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (19 preceding siblings ...)
  2018-06-19 16:13 ` [PATCH -tip v6 20/27] MIPS: kprobes: Don't call the ->break_handler() in MIPS " Masami Hiramatsu
@ 2018-06-19 16:14 ` " Masami Hiramatsu
  2018-06-19 16:14 ` [PATCH -tip v6 22/27] sh: kprobes: Don't call the ->break_handler() in SH " Masami Hiramatsu
                   ` (5 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:14 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Martin Schwidefsky, Heiko Carstens, linux-s390

Don't call the ->break_handler() from the s390 kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
---
 arch/s390/kernel/kprobes.c |   20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 0967de19f53d..3e34018960b5 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -332,26 +332,6 @@ static int kprobe_handler(struct pt_regs *regs)
 		}
 		enable_singlestep(kcb, regs, (unsigned long) p->ainsn.insn);
 		return 1;
-	} else if (kprobe_running()) {
-		p = __this_cpu_read(current_kprobe);
-		if (p->break_handler && p->break_handler(p, regs)) {
-			/*
-			 * Continuation after the jprobe completed and
-			 * caused the jprobe_return trap. The jprobe
-			 * break_handler "returns" to the original
-			 * function that still has the kprobe breakpoint
-			 * installed. We continue with single stepping.
-			 */
-			kcb->kprobe_status = KPROBE_HIT_SS;
-			enable_singlestep(kcb, regs,
-					  (unsigned long) p->ainsn.insn);
-			return 1;
-		} /* else:
-		   * No kprobe at this address and the current kprobe
-		   * has no break handler (no jprobe!). The kernel just
-		   * exploded, let the standard trap handler pick up the
-		   * pieces.
-		   */
 	} /* else:
 	   * No kprobe at this address and no active kprobe. The trap has
 	   * not been caused by a kprobe breakpoint. The race of breakpoint


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 22/27] sh: kprobes: Don't call the ->break_handler() in SH kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (20 preceding siblings ...)
  2018-06-19 16:14 ` [PATCH -tip v6 21/27] s390/kprobes: Don't call the ->break_handler() in s390 " Masami Hiramatsu
@ 2018-06-19 16:14 ` " Masami Hiramatsu
  2018-06-19 16:15 ` [PATCH -tip v6 23/27] sparc64: kprobes: Don't call the ->break_handler() in sparc64 " Masami Hiramatsu
                   ` (4 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:14 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Yoshinori Sato, Rich Felker, linux-sh

Don't call the ->break_handler() from the SH kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
---
 arch/sh/kernel/kprobes.c |   14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c
index 2b5e58873b96..4fafe0cd12c6 100644
--- a/arch/sh/kernel/kprobes.c
+++ b/arch/sh/kernel/kprobes.c
@@ -248,11 +248,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			prepare_singlestep(p, regs);
 			kcb->kprobe_status = KPROBE_REENTER;
 			return 1;
-		} else {
-			p = __this_cpu_read(current_kprobe);
-			if (p->break_handler && p->break_handler(p, regs)) {
-				goto ss_probe;
-			}
 		}
 		goto no_kprobe;
 	}
@@ -281,7 +276,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		/* handler has already set things up, so skip ss setup */
 		return 1;
 
-ss_probe:
 	prepare_singlestep(p, regs);
 	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
@@ -508,14 +502,8 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 				if (post_kprobe_handler(args->regs))
 					ret = NOTIFY_STOP;
 			} else {
-				if (kprobe_handler(args->regs)) {
+				if (kprobe_handler(args->regs))
 					ret = NOTIFY_STOP;
-				} else {
-					p = __this_cpu_read(current_kprobe);
-					if (p->break_handler &&
-					    p->break_handler(p, args->regs))
-						ret = NOTIFY_STOP;
-				}
 			}
 		}
 	}


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 23/27] sparc64: kprobes: Don't call the ->break_handler() in sparc64 kprobes code
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (21 preceding siblings ...)
  2018-06-19 16:14 ` [PATCH -tip v6 22/27] sh: kprobes: Don't call the ->break_handler() in SH " Masami Hiramatsu
@ 2018-06-19 16:15 ` " Masami Hiramatsu
  2018-06-19 16:15 ` [PATCH -tip v6 24/27] bpf: error-inject: kprobes: Clear current_kprobe and enable preempt in kprobe Masami Hiramatsu
                   ` (3 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:15 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, David S. Miller, sparclinux

Don't call the ->break_handler() from the sparc64 kprobes code,
because it was only used by jprobes which got removed.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
---
 arch/sparc/kernel/kprobes.c |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/arch/sparc/kernel/kprobes.c b/arch/sparc/kernel/kprobes.c
index f555711da8f1..c684c96ef2e9 100644
--- a/arch/sparc/kernel/kprobes.c
+++ b/arch/sparc/kernel/kprobes.c
@@ -147,18 +147,12 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			kcb->kprobe_status = KPROBE_REENTER;
 			prepare_singlestep(p, regs, kcb);
 			return 1;
-		} else {
-			if (*(u32 *)addr != BREAKPOINT_INSTRUCTION) {
+		} else if (*(u32 *)addr != BREAKPOINT_INSTRUCTION) {
 			/* The breakpoint instruction was removed by
 			 * another cpu right after we hit, no further
 			 * handling of this interrupt is appropriate
 			 */
-				ret = 1;
-				goto no_kprobe;
-			}
-			p = __this_cpu_read(current_kprobe);
-			if (p->break_handler && p->break_handler(p, regs))
-				goto ss_probe;
+			ret = 1;
 		}
 		goto no_kprobe;
 	}
@@ -184,7 +178,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	if (p->pre_handler && p->pre_handler(p, regs))
 		return 1;
 
-ss_probe:
 	prepare_singlestep(p, regs, kcb);
 	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 24/27] bpf: error-inject: kprobes: Clear current_kprobe and enable preempt in kprobe
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (22 preceding siblings ...)
  2018-06-19 16:15 ` [PATCH -tip v6 23/27] sparc64: kprobes: Don't call the ->break_handler() in sparc64 " Masami Hiramatsu
@ 2018-06-19 16:15 ` Masami Hiramatsu
  2018-06-19 16:16 ` [PATCH -tip v6 25/27] kprobes/x86: Do not disable preempt on int3 path Masami Hiramatsu
                   ` (2 subsequent siblings)
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:15 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Vineet Gupta, Russell King, Catalin Marinas,
	Will Deacon, Tony Luck, Fenghua Yu, Ralf Baechle, James Hogan,
	Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	Martin Schwidefsky, Heiko Carstens, Yoshinori Sato, Rich Felker,
	David S. Miller, Josef Bacik, Alexei Starovoitov, x86,
	linux-snps-arc, linux-arm-kernel, linux-ia64, linux-mips,
	linuxppc-dev, linux-s390, linux-sh, sparclinux

Clear current_kprobe and enable preemption in kprobe
even if pre_handler returns !0.

This simplifies function override using kprobes.

Jprobe used to require to keep the preemption disabled and
keep current_kprobe until it returned to original function
entry. For this reason kprobe_int3_handler() and similar
arch dependent kprobe handers checks pre_handler result
and exit without enabling preemption if the result is !0.

After removing the jprobe, Kprobes does not need to
keep preempt disabled even if user handler returns !0
anymore.

But since the function override handler in error-inject
and bpf is also returns !0 if it overrides a function,
to balancing the preempt count, it enables preemption
and reset current kprobe by itself.

That is a bad design that is very buggy. This fixes
such unbalanced preempt-count and current_kprobes setting
in kprobes, bpf and error-inject.

Note: for powerpc and x86, this removes all preempt_disable
from kprobe_ftrace_handler because ftrace callbacks are
called under preempt disabled.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: x86@kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
---
 Changes in v6:
  - Simplify kprobe_ftrace_handler change on x86 and powerpc code.
 Changes in v5:
  - Fix kprobe_ftrace_handler in arch/powerpc too.
---
 arch/arc/kernel/kprobes.c            |    5 +++--
 arch/arm/probes/kprobes/core.c       |   10 +++++-----
 arch/arm64/kernel/probes/kprobes.c   |   10 +++++-----
 arch/ia64/kernel/kprobes.c           |   13 ++++---------
 arch/mips/kernel/kprobes.c           |    4 ++--
 arch/powerpc/kernel/kprobes-ftrace.c |   19 ++++++-------------
 arch/powerpc/kernel/kprobes.c        |    7 +++++--
 arch/s390/kernel/kprobes.c           |    7 ++++---
 arch/sh/kernel/kprobes.c             |    7 ++++---
 arch/sparc/kernel/kprobes.c          |    7 ++++---
 arch/x86/kernel/kprobes/core.c       |    4 ++++
 arch/x86/kernel/kprobes/ftrace.c     |    9 +++------
 kernel/fail_function.c               |    3 ---
 kernel/trace/trace_kprobe.c          |   11 +++--------
 14 files changed, 52 insertions(+), 64 deletions(-)

diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
index 465365696c91..df35d4c0b0b8 100644
--- a/arch/arc/kernel/kprobes.c
+++ b/arch/arc/kernel/kprobes.c
@@ -231,6 +231,9 @@ int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 		if (!p->pre_handler || !p->pre_handler(p, regs)) {
 			setup_singlestep(p, regs);
 			kcb->kprobe_status = KPROBE_HIT_SS;
+		} else {
+			reset_current_kprobe();
+			preempt_enable_no_resched();
 		}
 
 		return 1;
@@ -442,9 +445,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 	regs->ret = orig_ret_address;
 
-	reset_current_kprobe();
 	kretprobe_hash_unlock(current, &flags);
-	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c
index 3192350f389d..8d37601fdb20 100644
--- a/arch/arm/probes/kprobes/core.c
+++ b/arch/arm/probes/kprobes/core.c
@@ -300,10 +300,10 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
 
 			/*
 			 * If we have no pre-handler or it returned 0, we
-			 * continue with normal processing.  If we have a
-			 * pre-handler and it returned non-zero, it prepped
-			 * for calling the break_handler below on re-entry,
-			 * so get out doing nothing more here.
+			 * continue with normal processing. If we have a
+			 * pre-handler and it returned non-zero, it will
+			 * modify the execution path and no need to single
+			 * stepping. Let's just reset current kprobe and exit.
 			 */
 			if (!p->pre_handler || !p->pre_handler(p, regs)) {
 				kcb->kprobe_status = KPROBE_HIT_SS;
@@ -312,8 +312,8 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
 					kcb->kprobe_status = KPROBE_HIT_SSDONE;
 					p->post_handler(p, regs, 0);
 				}
-				reset_current_kprobe();
 			}
+			reset_current_kprobe();
 		}
 	} else {
 		/*
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index 076c3c0775a6..5daf3d721cb7 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -395,9 +395,9 @@ static void __kprobes kprobe_handler(struct pt_regs *regs)
 			/*
 			 * If we have no pre-handler or it returned 0, we
 			 * continue with normal processing.  If we have a
-			 * pre-handler and it returned non-zero, it prepped
-			 * for calling the break_handler below on re-entry,
-			 * so get out doing nothing more here.
+			 * pre-handler and it returned non-zero, it will
+			 * modify the execution path and no need to single
+			 * stepping. Let's just reset current kprobe and exit.
 			 *
 			 * pre_handler can hit a breakpoint and can step thru
 			 * before return, keep PSTATE D-flag enabled until
@@ -405,8 +405,8 @@ static void __kprobes kprobe_handler(struct pt_regs *regs)
 			 */
 			if (!p->pre_handler || !p->pre_handler(p, regs)) {
 				setup_singlestep(p, regs, kcb, 0);
-				return;
-			}
+			} else
+				reset_current_kprobe();
 		}
 	}
 	/*
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 74c8524e6309..aa41bd5cf9b7 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -478,12 +478,9 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 			 */
 			break;
 	}
-
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
-	reset_current_kprobe();
 	kretprobe_hash_unlock(current, &flags);
-	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
@@ -851,13 +848,11 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 	set_current_kprobe(p, kcb);
 	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 
-	if (p->pre_handler && p->pre_handler(p, regs))
-		/*
-		 * Our pre-handler is specifically requesting that we just
-		 * do a return.  This is used for both the jprobe pre-handler
-		 * and the kretprobe trampoline
-		 */
+	if (p->pre_handler && p->pre_handler(p, regs)) {
+		reset_current_kprobe();
+		preempt_enable_no_resched();
 		return 1;
+	}
 
 #if !defined(CONFIG_PREEMPT)
 	if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index 7fd277bc59b9..54cd675c5d1d 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -358,6 +358,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 
 	if (p->pre_handler && p->pre_handler(p, regs)) {
 		/* handler has already set things up, so skip ss setup */
+		reset_current_kprobe();
+		preempt_enable_no_resched();
 		return 1;
 	}
 
@@ -543,9 +545,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 	instruction_pointer(regs) = orig_ret_address;
 
-	reset_current_kprobe();
 	kretprobe_hash_unlock(current, &flags);
-	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
diff --git a/arch/powerpc/kernel/kprobes-ftrace.c b/arch/powerpc/kernel/kprobes-ftrace.c
index 070d1d862444..e4a49c051325 100644
--- a/arch/powerpc/kernel/kprobes-ftrace.c
+++ b/arch/powerpc/kernel/kprobes-ftrace.c
@@ -32,11 +32,9 @@ void kprobe_ftrace_handler(unsigned long nip, unsigned long parent_nip,
 	struct kprobe *p;
 	struct kprobe_ctlblk *kcb;
 
-	preempt_disable();
-
 	p = get_kprobe((kprobe_opcode_t *)nip);
 	if (unlikely(!p) || kprobe_disabled(p))
-		goto end;
+		return;
 
 	kcb = get_kprobe_ctlblk();
 	if (kprobe_running()) {
@@ -60,18 +58,13 @@ void kprobe_ftrace_handler(unsigned long nip, unsigned long parent_nip,
 				kcb->kprobe_status = KPROBE_HIT_SSDONE;
 				p->post_handler(p, regs, 0);
 			}
-			__this_cpu_write(current_kprobe, NULL);
-		} else {
-			/*
-			 * If pre_handler returns !0, it sets regs->nip and
-			 * resets current kprobe. In this case, we should not
-			 * re-enable preemption.
-			 */
-			return;
 		}
+		/*
+		 * If pre_handler returns !0, it changes regs->nip. We have to
+		 * skip emulating post_handler.
+		 */
+		__this_cpu_write(current_kprobe, NULL);
 	}
-end:
-	preempt_enable_no_resched();
 }
 NOKPROBE_SYMBOL(kprobe_ftrace_handler);
 
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index f06747e2e70d..5c60bb0f927f 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -358,9 +358,12 @@ int kprobe_handler(struct pt_regs *regs)
 
 	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 	set_current_kprobe(p, regs, kcb);
-	if (p->pre_handler && p->pre_handler(p, regs))
-		/* handler has already set things up, so skip ss setup */
+	if (p->pre_handler && p->pre_handler(p, regs)) {
+		/* handler changed execution path, so skip ss setup */
+		reset_current_kprobe();
+		preempt_enable_no_resched();
 		return 1;
+	}
 
 	if (p->ainsn.boostable >= 0) {
 		ret = try_to_emulate(p, regs);
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 3e34018960b5..7c0a095e9c5f 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -326,8 +326,11 @@ static int kprobe_handler(struct pt_regs *regs)
 			 */
 			push_kprobe(kcb, p);
 			kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-			if (p->pre_handler && p->pre_handler(p, regs))
+			if (p->pre_handler && p->pre_handler(p, regs)) {
+				pop_kprobe(kcb);
+				preempt_enable_no_resched();
 				return 1;
+			}
 			kcb->kprobe_status = KPROBE_HIT_SS;
 		}
 		enable_singlestep(kcb, regs, (unsigned long) p->ainsn.insn);
@@ -431,9 +434,7 @@ static int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 
 	regs->psw.addr = orig_ret_address;
 
-	pop_kprobe(get_kprobe_ctlblk());
 	kretprobe_hash_unlock(current, &flags);
-	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c
index 4fafe0cd12c6..241e903dd3ee 100644
--- a/arch/sh/kernel/kprobes.c
+++ b/arch/sh/kernel/kprobes.c
@@ -272,9 +272,12 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	set_current_kprobe(p, regs, kcb);
 	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 
-	if (p->pre_handler && p->pre_handler(p, regs))
+	if (p->pre_handler && p->pre_handler(p, regs)) {
 		/* handler has already set things up, so skip ss setup */
+		reset_current_kprobe();
+		preempt_enable_no_resched();
 		return 1;
+	}
 
 	prepare_singlestep(p, regs);
 	kcb->kprobe_status = KPROBE_HIT_SS;
@@ -352,8 +355,6 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	regs->pc = orig_ret_address;
 	kretprobe_hash_unlock(current, &flags);
 
-	preempt_enable_no_resched();
-
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
 		kfree(ri);
diff --git a/arch/sparc/kernel/kprobes.c b/arch/sparc/kernel/kprobes.c
index c684c96ef2e9..dfbca2470536 100644
--- a/arch/sparc/kernel/kprobes.c
+++ b/arch/sparc/kernel/kprobes.c
@@ -175,8 +175,11 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 
 	set_current_kprobe(p, regs, kcb);
 	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-	if (p->pre_handler && p->pre_handler(p, regs))
+	if (p->pre_handler && p->pre_handler(p, regs)) {
+		reset_current_kprobe();
+		preempt_enable_no_resched();
 		return 1;
+	}
 
 	prepare_singlestep(p, regs, kcb);
 	kcb->kprobe_status = KPROBE_HIT_SS;
@@ -508,9 +511,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->tpc = orig_ret_address;
 	regs->tnpc = orig_ret_address + 4;
 
-	reset_current_kprobe();
 	kretprobe_hash_unlock(current, &flags);
-	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 0ac16a0d93e5..814e26b7c8a2 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -694,6 +694,10 @@ int kprobe_int3_handler(struct pt_regs *regs)
 			 */
 			if (!p->pre_handler || !p->pre_handler(p, regs))
 				setup_singlestep(p, regs, kcb, 0);
+			else {
+				reset_current_kprobe();
+				preempt_enable_no_resched();
+			}
 			return 1;
 		}
 	} else if (*addr != BREAKPOINT_INSTRUCTION) {
diff --git a/arch/x86/kernel/kprobes/ftrace.c b/arch/x86/kernel/kprobes/ftrace.c
index 02a6dd1b6bd0..ef819e19650b 100644
--- a/arch/x86/kernel/kprobes/ftrace.c
+++ b/arch/x86/kernel/kprobes/ftrace.c
@@ -45,8 +45,6 @@ void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
 		/* Kprobe handler expects regs->ip = ip + 1 as breakpoint hit */
 		regs->ip = ip + sizeof(kprobe_opcode_t);
 
-		/* To emulate trap based kprobes, preempt_disable here */
-		preempt_disable();
 		__this_cpu_write(current_kprobe, p);
 		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 		if (!p->pre_handler || !p->pre_handler(p, regs)) {
@@ -60,13 +58,12 @@ void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
 				p->post_handler(p, regs, 0);
 			}
 			regs->ip = orig_ip;
-			__this_cpu_write(current_kprobe, NULL);
-			preempt_enable_no_resched();
 		}
 		/*
-		 * If pre_handler returns !0, it sets regs->ip and
-		 * resets current kprobe, and keep preempt count +1.
+		 * If pre_handler returns !0, it changes regs->ip. We have to
+		 * skip emulating post_handler.
 		 */
+		__this_cpu_write(current_kprobe, NULL);
 	}
 }
 NOKPROBE_SYMBOL(kprobe_ftrace_handler);
diff --git a/kernel/fail_function.c b/kernel/fail_function.c
index 1d5632d8bbcc..b090688df94f 100644
--- a/kernel/fail_function.c
+++ b/kernel/fail_function.c
@@ -184,9 +184,6 @@ static int fei_kprobe_handler(struct kprobe *kp, struct pt_regs *regs)
 	if (should_fail(&fei_fault_attr, 1)) {
 		regs_set_return_value(regs, attr->retval);
 		override_function_with_return(regs);
-		/* Kprobe specific fixup */
-		reset_current_kprobe();
-		preempt_enable_no_resched();
 		return 1;
 	}
 
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index daa81571b22a..7e3b944b6ac1 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1217,16 +1217,11 @@ kprobe_perf_func(struct trace_kprobe *tk, struct pt_regs *regs)
 
 		/*
 		 * We need to check and see if we modified the pc of the
-		 * pt_regs, and if so clear the kprobe and return 1 so that we
-		 * don't do the single stepping.
-		 * The ftrace kprobe handler leaves it up to us to re-enable
-		 * preemption here before returning if we've modified the ip.
+		 * pt_regs, and if so return 1 so that we don't do the
+		 * single stepping.
 		 */
-		if (orig_ip != instruction_pointer(regs)) {
-			reset_current_kprobe();
-			preempt_enable_no_resched();
+		if (orig_ip != instruction_pointer(regs))
 			return 1;
-		}
 		if (!ret)
 			return 0;
 	}


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 25/27] kprobes/x86: Do not disable preempt on int3 path
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (23 preceding siblings ...)
  2018-06-19 16:15 ` [PATCH -tip v6 24/27] bpf: error-inject: kprobes: Clear current_kprobe and enable preempt in kprobe Masami Hiramatsu
@ 2018-06-19 16:16 ` Masami Hiramatsu
  2018-06-19 16:16 ` [PATCH -tip v6 26/27] Documentation: kprobes: Add how to change the execution path Masami Hiramatsu
  2018-06-19 16:17 ` [PATCH -tip v6 27/27] kprobes: Remove jprobe stub API Masami Hiramatsu
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:16 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, x86, linux-doc

Since int3 and debug exception(for singlestep) are run with
IRQ disabled and while running single stepping we drop IF
from regs->flags, that path must not be preemptible. So we
can remove the preempt disable/enable calls from that path.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
---
 Changes in v3:
  - Split user-side changes to another patch
 Changes in v2:
  - Include user-side changes.
---
 Documentation/kprobes.txt      |   11 +++++------
 arch/x86/kernel/kprobes/core.c |   18 ++++--------------
 arch/x86/kernel/kprobes/opt.c  |    1 -
 3 files changed, 9 insertions(+), 21 deletions(-)

diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 907a3017c0f2..3e9e99ea751b 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -566,12 +566,11 @@ the same handler) may run concurrently on different CPUs.
 Kprobes does not use mutexes or allocate memory except during
 registration and unregistration.
 
-Probe handlers are run with preemption disabled.  Depending on the
-architecture and optimization state, handlers may also run with
-interrupts disabled (e.g., kretprobe handlers and optimized kprobe
-handlers run without interrupt disabled on x86/x86-64).  In any case,
-your handler should not yield the CPU (e.g., by attempting to acquire
-a semaphore).
+Probe handlers are run with preemption disabled or interrupt disabled,
+which depends on the architecture and optimization state.  (e.g.,
+kretprobe handlers and optimized kprobe handlers run without interrupt
+disabled on x86/x86-64).  In any case, your handler should not yield
+the CPU (e.g., by attempting to acquire a semaphore, or waiting I/O).
 
 Since a return probe is implemented by replacing the return
 address with the trampoline's address, stack backtraces and calls
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 814e26b7c8a2..f7104b256de7 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -594,7 +594,6 @@ static void setup_singlestep(struct kprobe *p, struct pt_regs *regs,
 		 * stepping.
 		 */
 		regs->ip = (unsigned long)p->ainsn.insn;
-		preempt_enable_no_resched();
 		return;
 	}
 #endif
@@ -667,12 +666,10 @@ int kprobe_int3_handler(struct pt_regs *regs)
 
 	addr = (kprobe_opcode_t *)(regs->ip - sizeof(kprobe_opcode_t));
 	/*
-	 * We don't want to be preempted for the entire
-	 * duration of kprobe processing. We conditionally
-	 * re-enable preemption at the end of this function,
-	 * and also in reenter_kprobe() and setup_singlestep().
+	 * We don't want to be preempted for the entire duration of kprobe
+	 * processing. Since int3 and debug trap disables irqs and we clear
+	 * IF while singlestepping, it must be no preemptible.
 	 */
-	preempt_disable();
 
 	kcb = get_kprobe_ctlblk();
 	p = get_kprobe(addr);
@@ -694,10 +691,8 @@ int kprobe_int3_handler(struct pt_regs *regs)
 			 */
 			if (!p->pre_handler || !p->pre_handler(p, regs))
 				setup_singlestep(p, regs, kcb, 0);
-			else {
+			else
 				reset_current_kprobe();
-				preempt_enable_no_resched();
-			}
 			return 1;
 		}
 	} else if (*addr != BREAKPOINT_INSTRUCTION) {
@@ -711,11 +706,9 @@ int kprobe_int3_handler(struct pt_regs *regs)
 		 * the original instruction.
 		 */
 		regs->ip = (unsigned long)addr;
-		preempt_enable_no_resched();
 		return 1;
 	} /* else: not a kprobe fault; let the kernel handle it */
 
-	preempt_enable_no_resched();
 	return 0;
 }
 NOKPROBE_SYMBOL(kprobe_int3_handler);
@@ -966,8 +959,6 @@ int kprobe_debug_handler(struct pt_regs *regs)
 	}
 	reset_current_kprobe();
 out:
-	preempt_enable_no_resched();
-
 	/*
 	 * if somebody else is singlestepping across a probe point, flags
 	 * will have TF set, in which case, continue the remaining processing
@@ -1014,7 +1005,6 @@ int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 			restore_previous_kprobe(kcb);
 		else
 			reset_current_kprobe();
-		preempt_enable_no_resched();
 	} else if (kcb->kprobe_status == KPROBE_HIT_ACTIVE ||
 		   kcb->kprobe_status == KPROBE_HIT_SSDONE) {
 		/*
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index 203d398802a3..eaf02f2e7300 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -491,7 +491,6 @@ int setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter)
 		regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
 		if (!reenter)
 			reset_current_kprobe();
-		preempt_enable_no_resched();
 		return 1;
 	}
 	return 0;


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 26/27] Documentation: kprobes: Add how to change the execution path
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (24 preceding siblings ...)
  2018-06-19 16:16 ` [PATCH -tip v6 25/27] kprobes/x86: Do not disable preempt on int3 path Masami Hiramatsu
@ 2018-06-19 16:16 ` Masami Hiramatsu
  2018-06-19 16:31   ` Randy Dunlap
  2018-06-19 16:17 ` [PATCH -tip v6 27/27] kprobes: Remove jprobe stub API Masami Hiramatsu
  26 siblings, 1 reply; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:16 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Jonathan Corbet, linux-doc

Add a section that explaining how to change the execution
path with kprobes and warnings for some arch.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
---
 Documentation/kprobes.txt |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 3e9e99ea751b..8a98eed1521b 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -80,6 +80,26 @@ After the instruction is single-stepped, Kprobes executes the
 "post_handler," if any, that is associated with the kprobe.
 Execution then continues with the instruction following the probepoint.
 
+Changing Execution Path
+-----------------------
+
+Since the kprobes can probe into a running kernel code, it can change
+the register set, including instruction pointer. This operation
+requires maximum attention, such as keeping the stack frame, recovering
+execution path etc. Since it is operated on running kernel and need deep
+knowladge of the archtecture and concurrent computing, you can easily
+shot your foot.
+
+If you change the instruction pointer (and set up other related
+registers) in pre_handler, you must return !0 so that the kprobes
+stops single stepping and just returns to given address.
+This also means post_handler should not be called anymore.
+
+Note that this operation may be harder on some architectures which
+use TOC (Table of Contents) for function call, since you have to
+setup new TOC for your function in your module, and recover old
+one after back from it.
+
 Return Probes
 -------------
 


^ permalink raw reply	[flat|nested] 33+ messages in thread

* [PATCH -tip v6 27/27] kprobes: Remove jprobe stub API
  2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
                   ` (25 preceding siblings ...)
  2018-06-19 16:16 ` [PATCH -tip v6 26/27] Documentation: kprobes: Add how to change the execution path Masami Hiramatsu
@ 2018-06-19 16:17 ` Masami Hiramatsu
  26 siblings, 0 replies; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-19 16:17 UTC (permalink / raw)
  To: Thomas Gleixner, Ingo Molnar
  Cc: Masami Hiramatsu, Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch

Remove jprobe stub APIs from linux/kprobes.h since
the jprobe implementation was completely gone.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 include/linux/kprobes.h |   50 -----------------------------------------------
 1 file changed, 50 deletions(-)

diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index b520baa65682..e909413e4e38 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -63,7 +63,6 @@ struct pt_regs;
 struct kretprobe;
 struct kretprobe_instance;
 typedef int (*kprobe_pre_handler_t) (struct kprobe *, struct pt_regs *);
-typedef int (*kprobe_break_handler_t) (struct kprobe *, struct pt_regs *);
 typedef void (*kprobe_post_handler_t) (struct kprobe *, struct pt_regs *,
 				       unsigned long flags);
 typedef int (*kprobe_fault_handler_t) (struct kprobe *, struct pt_regs *,
@@ -101,12 +100,6 @@ struct kprobe {
 	 */
 	kprobe_fault_handler_t fault_handler;
 
-	/*
-	 * ... called if breakpoint trap occurs in probe handler.
-	 * Return 1 if it handled break, otherwise kernel will see it.
-	 */
-	kprobe_break_handler_t break_handler;
-
 	/* Saved opcode (which has been replaced with breakpoint) */
 	kprobe_opcode_t opcode;
 
@@ -155,24 +148,6 @@ static inline int kprobe_ftrace(struct kprobe *p)
 }
 
 /*
- * Special probe type that uses setjmp-longjmp type tricks to resume
- * execution at a specified entry with a matching prototype corresponding
- * to the probed function - a trick to enable arguments to become
- * accessible seamlessly by probe handling logic.
- * Note:
- * Because of the way compilers allocate stack space for local variables
- * etc upfront, regardless of sub-scopes within a function, this mirroring
- * principle currently works only for probes placed on function entry points.
- */
-struct jprobe {
-	struct kprobe kp;
-	void *entry;	/* probe handling code to jump to */
-};
-
-/* For backward compatibility with old code using JPROBE_ENTRY() */
-#define JPROBE_ENTRY(handler)	(handler)
-
-/*
  * Function-return probe -
  * Note:
  * User needs to provide a handler function, and initialize maxactive.
@@ -436,9 +411,6 @@ static inline void unregister_kprobe(struct kprobe *p)
 static inline void unregister_kprobes(struct kprobe **kps, int num)
 {
 }
-static inline void jprobe_return(void)
-{
-}
 static inline int register_kretprobe(struct kretprobe *rp)
 {
 	return -ENOSYS;
@@ -465,20 +437,6 @@ static inline int enable_kprobe(struct kprobe *kp)
 	return -ENOSYS;
 }
 #endif /* CONFIG_KPROBES */
-static inline int register_jprobe(struct jprobe *p)
-{
-	return -ENOSYS;
-}
-static inline int register_jprobes(struct jprobe **jps, int num)
-{
-	return -ENOSYS;
-}
-static inline void unregister_jprobe(struct jprobe *p)
-{
-}
-static inline void unregister_jprobes(struct jprobe **jps, int num)
-{
-}
 static inline int disable_kretprobe(struct kretprobe *rp)
 {
 	return disable_kprobe(&rp->kp);
@@ -487,14 +445,6 @@ static inline int enable_kretprobe(struct kretprobe *rp)
 {
 	return enable_kprobe(&rp->kp);
 }
-static inline int disable_jprobe(struct jprobe *jp)
-{
-	return -ENOSYS;
-}
-static inline int enable_jprobe(struct jprobe *jp)
-{
-	return -ENOSYS;
-}
 
 #ifndef CONFIG_KPROBES
 static inline bool is_kprobe_insn_slot(unsigned long addr)


^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH -tip v6 26/27] Documentation: kprobes: Add how to change the execution path
  2018-06-19 16:16 ` [PATCH -tip v6 26/27] Documentation: kprobes: Add how to change the execution path Masami Hiramatsu
@ 2018-06-19 16:31   ` Randy Dunlap
  2018-06-20  8:26     ` Masami Hiramatsu
  0 siblings, 1 reply; 33+ messages in thread
From: Randy Dunlap @ 2018-06-19 16:31 UTC (permalink / raw)
  To: Masami Hiramatsu, Thomas Gleixner, Ingo Molnar
  Cc: Ingo Molnar, H . Peter Anvin, linux-kernel,
	Ananth N Mavinakayanahalli, Andrew Morton, Steven Rostedt,
	linux-arch, Jonathan Corbet, linux-doc

On 06/19/2018 09:16 AM, Masami Hiramatsu wrote:
> Add a section that explaining how to change the execution
> path with kprobes and warnings for some arch.
> 
> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Cc: linux-doc@vger.kernel.org
> ---
>  Documentation/kprobes.txt |   20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
> index 3e9e99ea751b..8a98eed1521b 100644
> --- a/Documentation/kprobes.txt
> +++ b/Documentation/kprobes.txt
> @@ -80,6 +80,26 @@ After the instruction is single-stepped, Kprobes executes the
>  "post_handler," if any, that is associated with the kprobe.
>  Execution then continues with the instruction following the probepoint.
>  

Hi,
I have a few small suggestions...


> +Changing Execution Path
> +-----------------------
> +
> +Since the kprobes can probe into a running kernel code, it can change

   Since kprobes can probe into running kernel code, it can change

> +the register set, including instruction pointer. This operation
> +requires maximum attention, such as keeping the stack frame, recovering
> +execution path etc. Since it is operated on running kernel and need deep

                       Since it operates on a running kernel and needs deep

> +knowladge of the archtecture and concurrent computing, you can easily

   knowledge of the architecture

> +shot your foot.

   shoot

> +
> +If you change the instruction pointer (and set up other related
> +registers) in pre_handler, you must return !0 so that the kprobes

                                                 so that kprobes

> +stops single stepping and just returns to given address.

                                          to the given address.

> +This also means post_handler should not be called anymore.
> +
> +Note that this operation may be harder on some architectures which
> +use TOC (Table of Contents) for function call, since you have to
> +setup new TOC for your function in your module, and recover old

   setup a new TOC for your function in your module, and recover the old

> +one after back from it.

   one after returning from it.

> +
>  Return Probes
>  -------------


-- 
~Randy

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH -tip v6 26/27] Documentation: kprobes: Add how to change the execution path
  2018-06-19 16:31   ` Randy Dunlap
@ 2018-06-20  8:26     ` Masami Hiramatsu
  2018-06-21 10:35       ` Ingo Molnar
  0 siblings, 1 reply; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-20  8:26 UTC (permalink / raw)
  To: Randy Dunlap
  Cc: Thomas Gleixner, Ingo Molnar, Ingo Molnar, H . Peter Anvin,
	linux-kernel, Ananth N Mavinakayanahalli, Andrew Morton,
	Steven Rostedt, linux-arch, Jonathan Corbet, linux-doc

On Tue, 19 Jun 2018 09:31:49 -0700
Randy Dunlap <rdunlap@infradead.org> wrote:

> On 06/19/2018 09:16 AM, Masami Hiramatsu wrote:
> > Add a section that explaining how to change the execution
> > path with kprobes and warnings for some arch.
> > 
> > Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
> > Cc: Jonathan Corbet <corbet@lwn.net>
> > Cc: linux-doc@vger.kernel.org
> > ---
> >  Documentation/kprobes.txt |   20 ++++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> > 
> > diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
> > index 3e9e99ea751b..8a98eed1521b 100644
> > --- a/Documentation/kprobes.txt
> > +++ b/Documentation/kprobes.txt
> > @@ -80,6 +80,26 @@ After the instruction is single-stepped, Kprobes executes the
> >  "post_handler," if any, that is associated with the kprobe.
> >  Execution then continues with the instruction following the probepoint.
> >  
> 
> Hi,
> I have a few small suggestions...

Hi Randy,

Thank you for your suggestions!
All of those are good to me. I'll fix it:)

Thank you!

> 
> 
> > +Changing Execution Path
> > +-----------------------
> > +
> > +Since the kprobes can probe into a running kernel code, it can change
> 
>    Since kprobes can probe into running kernel code, it can change
> 
> > +the register set, including instruction pointer. This operation
> > +requires maximum attention, such as keeping the stack frame, recovering
> > +execution path etc. Since it is operated on running kernel and need deep
> 
>                        Since it operates on a running kernel and needs deep
> 
> > +knowladge of the archtecture and concurrent computing, you can easily
> 
>    knowledge of the architecture
> 
> > +shot your foot.
> 
>    shoot
> 
> > +
> > +If you change the instruction pointer (and set up other related
> > +registers) in pre_handler, you must return !0 so that the kprobes
> 
>                                                  so that kprobes
> 
> > +stops single stepping and just returns to given address.
> 
>                                           to the given address.
> 
> > +This also means post_handler should not be called anymore.
> > +
> > +Note that this operation may be harder on some architectures which
> > +use TOC (Table of Contents) for function call, since you have to
> > +setup new TOC for your function in your module, and recover old
> 
>    setup a new TOC for your function in your module, and recover the old
> 
> > +one after back from it.
> 
>    one after returning from it.
> 
> > +
> >  Return Probes
> >  -------------
> 
> 
> -- 
> ~Randy


-- 
Masami Hiramatsu <mhiramat@kernel.org>

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH -tip v6 26/27] Documentation: kprobes: Add how to change the execution path
  2018-06-20  8:26     ` Masami Hiramatsu
@ 2018-06-21 10:35       ` Ingo Molnar
  2018-06-22  6:07         ` Masami Hiramatsu
  0 siblings, 1 reply; 33+ messages in thread
From: Ingo Molnar @ 2018-06-21 10:35 UTC (permalink / raw)
  To: Masami Hiramatsu
  Cc: Randy Dunlap, Thomas Gleixner, Ingo Molnar, H . Peter Anvin,
	linux-kernel, Ananth N Mavinakayanahalli, Andrew Morton,
	Steven Rostedt, linux-arch, Jonathan Corbet, linux-doc


* Masami Hiramatsu <mhiramat@kernel.org> wrote:

> On Tue, 19 Jun 2018 09:31:49 -0700
> Randy Dunlap <rdunlap@infradead.org> wrote:
> 
> > On 06/19/2018 09:16 AM, Masami Hiramatsu wrote:
> > > Add a section that explaining how to change the execution
> > > path with kprobes and warnings for some arch.
> > > 
> > > Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
> > > Cc: Jonathan Corbet <corbet@lwn.net>
> > > Cc: linux-doc@vger.kernel.org
> > > ---
> > >  Documentation/kprobes.txt |   20 ++++++++++++++++++++
> > >  1 file changed, 20 insertions(+)
> > > 
> > > diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
> > > index 3e9e99ea751b..8a98eed1521b 100644
> > > --- a/Documentation/kprobes.txt
> > > +++ b/Documentation/kprobes.txt
> > > @@ -80,6 +80,26 @@ After the instruction is single-stepped, Kprobes executes the
> > >  "post_handler," if any, that is associated with the kprobe.
> > >  Execution then continues with the instruction following the probepoint.
> > >  
> > 
> > Hi,
> > I have a few small suggestions...
> 
> Hi Randy,
> 
> Thank you for your suggestions!
> All of those are good to me. I'll fix it:)

Could you please send a delta patch on top of your v6 series, with Randy credited, 
etc?

I've applied your series and will push it out once it passes all testing.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 33+ messages in thread

* Re: [PATCH -tip v6 26/27] Documentation: kprobes: Add how to change the execution path
  2018-06-21 10:35       ` Ingo Molnar
@ 2018-06-22  6:07         ` Masami Hiramatsu
  2018-06-22  9:15           ` [tip:perf/core] kprobes/Documentation: Fix various typos tip-bot for Masami Hiramatsu
  0 siblings, 1 reply; 33+ messages in thread
From: Masami Hiramatsu @ 2018-06-22  6:07 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Randy Dunlap, Thomas Gleixner, Ingo Molnar, H . Peter Anvin,
	linux-kernel, Ananth N Mavinakayanahalli, Andrew Morton,
	Steven Rostedt, linux-arch, Jonathan Corbet, linux-doc

On Thu, 21 Jun 2018 12:35:46 +0200
Ingo Molnar <mingo@kernel.org> wrote:

> 
> * Masami Hiramatsu <mhiramat@kernel.org> wrote:
> 
> > On Tue, 19 Jun 2018 09:31:49 -0700
> > Randy Dunlap <rdunlap@infradead.org> wrote:
> > 
> > > On 06/19/2018 09:16 AM, Masami Hiramatsu wrote:
> > > > Add a section that explaining how to change the execution
> > > > path with kprobes and warnings for some arch.
> > > > 
> > > > Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
> > > > Cc: Jonathan Corbet <corbet@lwn.net>
> > > > Cc: linux-doc@vger.kernel.org
> > > > ---
> > > >  Documentation/kprobes.txt |   20 ++++++++++++++++++++
> > > >  1 file changed, 20 insertions(+)
> > > > 
> > > > diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
> > > > index 3e9e99ea751b..8a98eed1521b 100644
> > > > --- a/Documentation/kprobes.txt
> > > > +++ b/Documentation/kprobes.txt
> > > > @@ -80,6 +80,26 @@ After the instruction is single-stepped, Kprobes executes the
> > > >  "post_handler," if any, that is associated with the kprobe.
> > > >  Execution then continues with the instruction following the probepoint.
> > > >  
> > > 
> > > Hi,
> > > I have a few small suggestions...
> > 
> > Hi Randy,
> > 
> > Thank you for your suggestions!
> > All of those are good to me. I'll fix it:)
> 
> Could you please send a delta patch on top of your v6 series, with Randy credited, 
> etc?

Ok, Here's the delta patch.


> 
> I've applied your series and will push it out once it passes all testing.

Thanks!


From 103fc58ece99475b855e065bd48d780697b93bbc Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <mhiramat@kernel.org>
Date: Fri, 22 Jun 2018 15:05:49 +0900
Subject: [PATCH] Documentation/kprobes: Fix typo in Changing Execution Path
 section

Fix typo and clean it up according to the
comment from Randy.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
---
 Documentation/kprobes.txt | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 13d8efd..10f4499 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -83,22 +83,22 @@ Execution then continues with the instruction following the probepoint.
 Changing Execution Path
 -----------------------
 
-Since the kprobes can probe into a running kernel code, it can change
-the register set, including instruction pointer. This operation
-requires maximum attention, such as keeping the stack frame, recovering
-execution path etc. Since it is operated on running kernel and need deep
-knowladge of the archtecture and concurrent computing, you can easily
-shot your foot.
+Since kprobes can probe into a running kernel code, it can change the
+register set, including instruction pointer. This operation requires
+maximum care, such as keeping the stack frame, recovering the execution
+path etc. Since it operates on a running kernel and needs deep knowledge
+of computer architecture and concurrent computing, you can easily shoot
+your foot.
 
 If you change the instruction pointer (and set up other related
-registers) in pre_handler, you must return !0 so that the kprobes
-stops single stepping and just returns to given address.
+registers) in pre_handler, you must return !0 so that kprobes stops
+single stepping and just returns to the given address.
 This also means post_handler should not be called anymore.
 
-Note that this operation may be harder on some architectures which
-use TOC (Table of Contents) for function call, since you have to
-setup new TOC for your function in your module, and recover old
-one after back from it.
+Note that this operation may be harder on some architectures which use
+TOC (Table of Contents) for function call, since you have to setup a new
+TOC for your function in your module, and recover the old one after
+returning from it.
 
 Return Probes
 -------------
-- 
2.7.4

^ permalink raw reply	[flat|nested] 33+ messages in thread

* [tip:perf/core] kprobes/Documentation: Fix various typos
  2018-06-22  6:07         ` Masami Hiramatsu
@ 2018-06-22  9:15           ` tip-bot for Masami Hiramatsu
  0 siblings, 0 replies; 33+ messages in thread
From: tip-bot for Masami Hiramatsu @ 2018-06-22  9:15 UTC (permalink / raw)
  To: linux-tip-commits
  Cc: corbet, torvalds, hpa, rdunlap, mhiramat, peterz, rostedt,
	linux-kernel, akpm, tglx, mingo, ananth

Commit-ID:  01bdee64f9cf8e15f998bf52789ed9d0ebdfa621
Gitweb:     https://git.kernel.org/tip/01bdee64f9cf8e15f998bf52789ed9d0ebdfa621
Author:     Masami Hiramatsu <mhiramat@kernel.org>
AuthorDate: Fri, 22 Jun 2018 15:07:40 +0900
Committer:  Ingo Molnar <mingo@kernel.org>
CommitDate: Fri, 22 Jun 2018 11:10:55 +0200

kprobes/Documentation: Fix various typos

Fix typos and clean up the wording, with the help of Randy Dunlap.

Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20180622150740.bd26241032c972d86e23bf73@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 Documentation/kprobes.txt | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 13d8efdb9718..10f4499e677c 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -83,22 +83,22 @@ Execution then continues with the instruction following the probepoint.
 Changing Execution Path
 -----------------------
 
-Since the kprobes can probe into a running kernel code, it can change
-the register set, including instruction pointer. This operation
-requires maximum attention, such as keeping the stack frame, recovering
-execution path etc. Since it is operated on running kernel and need deep
-knowladge of the archtecture and concurrent computing, you can easily
-shot your foot.
+Since kprobes can probe into a running kernel code, it can change the
+register set, including instruction pointer. This operation requires
+maximum care, such as keeping the stack frame, recovering the execution
+path etc. Since it operates on a running kernel and needs deep knowledge
+of computer architecture and concurrent computing, you can easily shoot
+your foot.
 
 If you change the instruction pointer (and set up other related
-registers) in pre_handler, you must return !0 so that the kprobes
-stops single stepping and just returns to given address.
+registers) in pre_handler, you must return !0 so that kprobes stops
+single stepping and just returns to the given address.
 This also means post_handler should not be called anymore.
 
-Note that this operation may be harder on some architectures which
-use TOC (Table of Contents) for function call, since you have to
-setup new TOC for your function in your module, and recover old
-one after back from it.
+Note that this operation may be harder on some architectures which use
+TOC (Table of Contents) for function call, since you have to setup a new
+TOC for your function in your module, and recover the old one after
+returning from it.
 
 Return Probes
 -------------

^ permalink raw reply	[flat|nested] 33+ messages in thread

end of thread, back to index

Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-19 16:04 [PATCH -tip v6 00/27] kprobes: Cleanup jprobe implementation Masami Hiramatsu
2018-06-19 16:04 ` [PATCH -tip v6 01/27] Documentation/kprobes: Fix to remove remaining jprobe Masami Hiramatsu
2018-06-19 16:05 ` [PATCH -tip v6 02/27] kprobes: Remove jprobe API implementation Masami Hiramatsu
2018-06-19 16:05 ` [PATCH -tip v6 03/27] kprobes/x86: Remove jprobe implementation Masami Hiramatsu
2018-06-19 16:06 ` [PATCH -tip v6 04/27] ARC: kprobes: " Masami Hiramatsu
2018-06-19 16:06 ` [PATCH -tip v6 05/27] ARM: kprobes: Remove jprobe arm implementation Masami Hiramatsu
2018-06-19 16:07 ` [PATCH -tip v6 06/27] arm64: kprobes: Remove jprobe implementation Masami Hiramatsu
2018-06-19 16:07 ` [PATCH -tip v6 07/27] powerpc/kprobes: Remove jprobe powerpc implementation Masami Hiramatsu
2018-06-19 16:08 ` [PATCH -tip v6 08/27] ia64: kprobes: Remove jprobe implementation Masami Hiramatsu
2018-06-19 16:08 ` [PATCH -tip v6 09/27] MIPS: " Masami Hiramatsu
2018-06-19 16:08 ` [PATCH -tip v6 10/27] s390/kprobes: " Masami Hiramatsu
2018-06-19 16:09 ` [PATCH -tip v6 11/27] sh: kprobes: " Masami Hiramatsu
2018-06-19 16:09 ` [PATCH -tip v6 12/27] sparc64: " Masami Hiramatsu
2018-06-19 16:10 ` [PATCH -tip v6 13/27] kprobes: Don't check the ->break_handler() in generic kprobes code Masami Hiramatsu
2018-06-19 16:10 ` [PATCH -tip v6 14/27] kprobes/x86: Don't call ->break_handler() in x86 kprobes Masami Hiramatsu
2018-06-19 16:11 ` [PATCH -tip v6 15/27] ARC: kprobes: Don't call the ->break_handler() in ARC kprobes code Masami Hiramatsu
2018-06-19 16:11 ` [PATCH -tip v6 16/27] ARM: kprobes: Don't call the ->break_handler() in arm " Masami Hiramatsu
2018-06-19 16:12 ` [PATCH -tip v6 17/27] arm64: kprobes: Don't call the ->break_handler() in arm64 " Masami Hiramatsu
2018-06-19 16:12 ` [PATCH -tip v6 18/27] powerpc/kprobes: Don't call the ->break_handler() in powerpc " Masami Hiramatsu
2018-06-19 16:13 ` [PATCH -tip v6 19/27] ia64: kprobes: Don't call the ->break_handler() in ia64 " Masami Hiramatsu
2018-06-19 16:13 ` [PATCH -tip v6 20/27] MIPS: kprobes: Don't call the ->break_handler() in MIPS " Masami Hiramatsu
2018-06-19 16:14 ` [PATCH -tip v6 21/27] s390/kprobes: Don't call the ->break_handler() in s390 " Masami Hiramatsu
2018-06-19 16:14 ` [PATCH -tip v6 22/27] sh: kprobes: Don't call the ->break_handler() in SH " Masami Hiramatsu
2018-06-19 16:15 ` [PATCH -tip v6 23/27] sparc64: kprobes: Don't call the ->break_handler() in sparc64 " Masami Hiramatsu
2018-06-19 16:15 ` [PATCH -tip v6 24/27] bpf: error-inject: kprobes: Clear current_kprobe and enable preempt in kprobe Masami Hiramatsu
2018-06-19 16:16 ` [PATCH -tip v6 25/27] kprobes/x86: Do not disable preempt on int3 path Masami Hiramatsu
2018-06-19 16:16 ` [PATCH -tip v6 26/27] Documentation: kprobes: Add how to change the execution path Masami Hiramatsu
2018-06-19 16:31   ` Randy Dunlap
2018-06-20  8:26     ` Masami Hiramatsu
2018-06-21 10:35       ` Ingo Molnar
2018-06-22  6:07         ` Masami Hiramatsu
2018-06-22  9:15           ` [tip:perf/core] kprobes/Documentation: Fix various typos tip-bot for Masami Hiramatsu
2018-06-19 16:17 ` [PATCH -tip v6 27/27] kprobes: Remove jprobe stub API Masami Hiramatsu

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git