From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-0.8 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,SPF_PASS,T_DKIMWL_WL_MED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 87942C43141 for ; Thu, 21 Jun 2018 17:42:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id CDDE7218E0 for ; Thu, 21 Jun 2018 17:42:32 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=cogentembedded-com.20150623.gappssmtp.com header.i=@cogentembedded-com.20150623.gappssmtp.com header.b="CydWXVD/" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org CDDE7218E0 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=cogentembedded.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933376AbeFURmb (ORCPT ); Thu, 21 Jun 2018 13:42:31 -0400 Received: from mail-lf0-f68.google.com ([209.85.215.68]:33376 "EHLO mail-lf0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932695AbeFURlx (ORCPT ); Thu, 21 Jun 2018 13:41:53 -0400 Received: by mail-lf0-f68.google.com with SMTP id y20-v6so5554967lfy.0 for ; Thu, 21 Jun 2018 10:41:53 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=cogentembedded-com.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=9TS1UkUE1OuMW07dhLE9pNmShQHJ7ZI4HIFh9vRhH3k=; b=CydWXVD/Y6p87Grv2d+J4hMXuIFz4s2jCX+nYi8pFb0vHgw707qrxce5j8pGTmKqN8 IVbfRE50zr+GYKbOCadiZDp5FotQkqWenyTzPAOdjnME49/jIUOHy7hOGTGHjIEJDClQ cmBr5aVWivWBZKbCSVWDTZNxvoInRGTfKRGwpt/KUFXssvYNBu/0wrUD/aiSeTe6Whif F5DGoKcHZkqP2U8yM9ZZQk789f7wgyRSxGfE2qDDzBQ2mb0cBzEQ3CB2Hg7QyPlQmkt7 Mm5LtIGl9Ak77hpquIOHOUYKFcuem/W6wWH5C3ZxD5B0xRA5SSANuTQrNvOMWWK6qXYp Lw4g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=9TS1UkUE1OuMW07dhLE9pNmShQHJ7ZI4HIFh9vRhH3k=; b=S+K+t0ZDHxP+pMkkUNoHOxXfMngGsg2Kze6e3R1S8sqiohg4kC+3fmCpI0qQRyBu1X hyt95m0J/HXPYGdF4ahZ5JGaE2M4Z60utJ0mHQZCdJNB7InPP49/9iVO73jRULZsVhM8 WQl1WtQIwqnCTsGj1bgq77+1OhtuR2xzZ/nu1XHrpRjjA2p5arXk4rt37QnRZ1af8ndV Xp3vDvegUlVnn1Ys1ZV3iiMy5mivIkepPflS9UULwI51Mu6/PfjMKAAHoX35BIhf9bt6 1OI6uXwqw3WFDuErOd2mcXT1JaHo52ERUsCDeTUu0pktKqhUceKnmHs6uF3TmSW/EdkG 6AVA== X-Gm-Message-State: APt69E2RERM39Ham0gol1E4iQFSgpqUi8lhEsxe3erlvsmuIcMSNZF4h bsGMC83VEF9np/zLdnoCGHcP0w== X-Google-Smtp-Source: ADUXVKI0M2EoYfyKU0uET4+t3AvtGUGOE02Lie6MNgHJC5Dw0bVZ4WpKqQvgOJKk5UlK3jDlen2+yw== X-Received: by 2002:a2e:7603:: with SMTP id r3-v6mr1334339ljc.81.1529602912188; Thu, 21 Jun 2018 10:41:52 -0700 (PDT) Received: from localhost.localdomain (178-16-155-142.obit.ru. [178.16.155.142]) by smtp.gmail.com with ESMTPSA id s5-v6sm951756ljj.93.2018.06.21.10.41.50 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 21 Jun 2018 10:41:51 -0700 (PDT) From: Andrey Gusakov To: Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , Rob Herring , Mark Rutland , cphealy@gmail.com, andrew.smirnov@gmail.com, l.stach@pengutronix.de Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, andrey.gusakov@cogentembedded.com Subject: [PATCH 1/3] ARM: dts: imx51-zii-common: create common include dtsi Date: Thu, 21 Jun 2018 20:44:58 +0300 Message-Id: <1529603100-31958-2-git-send-email-andrey.gusakov@cogentembedded.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1529603100-31958-1-git-send-email-andrey.gusakov@cogentembedded.com> References: <1529603100-31958-1-git-send-email-andrey.gusakov@cogentembedded.com> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Make shared include file. Move common stuff from rdu1 dts file to dtsi for future reuse by other imx51 based boards from ZII. Signed-off-by: Andrey Gusakov --- arch/arm/boot/dts/imx51-zii-common.dtsi | 317 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx51-zii-rdu1.dts | 330 +++----------------------------- 2 files changed, 347 insertions(+), 300 deletions(-) create mode 100644 arch/arm/boot/dts/imx51-zii-common.dtsi diff --git a/arch/arm/boot/dts/imx51-zii-common.dtsi b/arch/arm/boot/dts/imx51-zii-common.dtsi new file mode 100644 index 0000000..b0f0643 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-common.dtsi @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) 2018 Zodiac Inflight Innovations + +#include "imx51.dtsi" + +/ { + chosen { + stdout-path = &uart1; + }; + + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + + i2c_gpio: i2c-gpio { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_swi2c>; + i2c-gpio,delay-us = <50>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled3: led3@3 { + reg = <3>; + label = "system:red:power"; + linux,default-trigger = "default-on"; + }; + + sysled4: led4@4 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, + <&gpio3 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&esdhc1 { + non-removable; + no-1-8-v; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc4>; + bus-width = <4>; + no-1-8-v; + no-sdio; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb2_reg>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185 + MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185 + MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185 + MX51_PAD_NANDF_RDY_INT__GPIO3_24 0x85 + MX51_PAD_NANDF_D12__GPIO3_28 0x85 + >; + }; + + pinctrl_esdhc1_4bit: esdhc1grp_4bit { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + >; + }; + + pinctrl_esdhc1_8bit: esdhc1grp_8bit { + fsl,pins = < + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 + >; + }; + + pinctrl_esdhc4: esdhc4grp { + fsl,pins = < + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 + MX51_PAD_NANDF_D0__GPIO4_8 0x100 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x85 + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index df9eca9..59a80da 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -1,61 +1,14 @@ -/* - * Copyright (C) 2017 Zodiac Inflight Innovations - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) 2018 Zodiac Inflight Innovations /dts-v1/; -#include "imx51.dtsi" +#include "imx51-zii-common.dtsi" #include / { model = "ZII RDU1 Board"; compatible = "zii,imx51-rdu1", "fsl,imx51"; - chosen { - stdout-path = &uart1; - }; - - /* Will be filled by the bootloader */ - memory@90000000 { - reg = <0x90000000 0>; - }; - aliases { mdio-gpio0 = &mdio_gpio; rtc0 = &ds1341; @@ -94,14 +47,6 @@ enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; }; - reg_5p0v_main: regulator-5p0v-main { - compatible = "regulator-fixed"; - regulator-name = "5V_MAIN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -150,28 +95,6 @@ }; }; - i2c_gpio: i2c-gpio { - compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_swi2c>; - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */ - <&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */ - i2c-gpio,delay-us = <50>; - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clk_26M_snd>; - VDDA-supply = <&vdig_reg>; - VDDIO-supply = <&vvideo_reg>; - #sound-dai-cells = <0>; - }; - }; - spi_gpio: spi-gpio { compatible = "spi-gpio"; #address-cells = <1>; @@ -315,178 +238,30 @@ }; }; -&cpu { - cpu-supply = <&sw1_reg>; +&usb_vbus { + regulator-always-on; }; -&ecspi1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, - <&gpio4 25 GPIO_ACTIVE_LOW>; - status = "okay"; - - pmic@0 { - compatible = "fsl,mc13892"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; - spi-max-frequency = <6000000>; - spi-cs-high; - reg = <0>; - interrupt-parent = <&gpio1>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - fsl,mc13xxx-uses-adc; - - regulators { - sw1_reg: sw1 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1375000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: sw3 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; - regulator-boot-on; - regulator-always-on; - }; - - vpll_reg: vpll { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - vdig_reg: vdig { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1650000>; - regulator-boot-on; - }; - - vsd_reg: vsd { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3150000>; - }; - - vusb_reg: vusb { - regulator-always-on; - }; - - vusb2_reg: vusb2 { - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <2775000>; - regulator-boot-on; - regulator-always-on; - }; - - vvideo_reg: vvideo { - regulator-min-microvolt = <2775000>; - regulator-max-microvolt = <2775000>; - }; - - vaudio_reg: vaudio { - regulator-min-microvolt = <2300000>; - regulator-max-microvolt = <3000000>; - }; - - vcam_reg: vcam { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3000000>; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - }; - }; - - leds { - #address-cells = <1>; - #size-cells = <0>; - led-control = <0x0 0x0 0x3f83f8 0x0>; - - sysled0@3 { - reg = <3>; - label = "system:green:status"; - linux,default-trigger = "default-on"; - }; - - sysled1@4 { - reg = <4>; - label = "system:green:act"; - linux,default-trigger = "heartbeat"; - }; - }; - }; - - flash@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash"; - spi-max-frequency = <25000000>; - reg = <1>; - }; +&ecspi2 { + status = "disabled"; }; &esdhc1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; + pinctrl-0 = <&pinctrl_esdhc1_4bit>; bus-width = <4>; - no-1-8-v; - non-removable; - no-sdio; - no-sd; - status = "okay"; +}; + +&esdhc4 { + status = "disabled"; }; &fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "mii"; phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; phy-supply = <&vgen3_reg>; - status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c04"; - pagesize = <16>; - reg = <0x50>; - }; - hpa1: amp@60 { compatible = "ti,tpa6130a2"; reg = <0x60>; @@ -550,31 +325,29 @@ }; -&ipu_di0_disp1 { - remote-endpoint = <&display_in>; -}; +&i2c_gpio { + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */ + <&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */ -&ssi2 { - status = "okay"; + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clk_26M_snd>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + #sound-dai-cells = <0>; + }; }; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; +&ipu_di0_disp1 { + remote-endpoint = <&display_in>; }; -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; +&ssi2 { status = "okay"; }; &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; - rave-sp { compatible = "zii,rave-sp-rdu1"; current-speed = <38400>; @@ -593,7 +366,7 @@ fsl,usbphy = <&usbh1phy>; disable-over-current; maximum-speed = "full-speed"; - vbus-supply = <®_5p0v_main>; + vbus-supply = <&usb_vbus>; status = "okay"; }; @@ -604,20 +377,12 @@ phy_type = "ulpi"; fsl,usbphy = <&usbh2phy>; disable-over-current; - vbus-supply = <®_5p0v_main>; + vbus-supply = <&usb_vbus>; status = "okay"; }; -&usbphy0 { - vcc-supply = <&vusb_reg>; -}; - -&usbotg { - dr_mode = "host"; - disable-over-current; - phy_type = "utmi_wide"; - vbus-supply = <®_5p0v_main>; - status = "okay"; +&sysled3 { + label = "system:green:status"; }; &iomuxc { @@ -642,27 +407,6 @@ >; }; - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 - MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 - >; - }; - - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 - MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 - MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 - MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 - MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 - MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 - >; - }; - pinctrl_fec: fecgrp { fsl,pins = < MX51_PAD_EIM_EB2__FEC_MDIO 0x1f5 @@ -696,13 +440,6 @@ >; }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed - MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed - >; - }; - pinctrl_ipu_disp1: ipudisp1grp { fsl,pins = < MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 @@ -741,13 +478,6 @@ >; }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX51_PAD_GPIO1_4__GPIO1_4 0x1e0 - MX51_PAD_GPIO1_8__GPIO1_8 0x21e2 - >; - }; - pinctrl_sndgate26mhz: sndgate26mhzgrp { fsl,pins = < MX51_PAD_CSPI1_RDY__GPIO4_26 0x85 -- 1.9.1