linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Wu <david.wu@rock-chips.com>
To: davem@davemloft.net, heiko@sntech.de, robh+dt@kernel.org
Cc: mark.rutland@arm.com, huangtao@rock-chips.com,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	David Wu <david.wu@rock-chips.com>
Subject: [PATCH v4] net: ethernet: stmmac: dwmac-rk: Add GMAC support for px30
Date: Thu, 28 Jun 2018 09:33:21 +0800	[thread overview]
Message-ID: <1530149601-23337-1-git-send-email-david.wu@rock-chips.com> (raw)

Add constants and callback functions for the dwmac on px30 Soc.
The base structure is the same, but registers and the bits in
them are moved slightly, and add the clk_mac_speed for selecting
mac speed.

Signed-off-by: David Wu <david.wu@rock-chips.com>
---
Change in v4:
- Fix the patch applied failed at net-next.

Change in v3:
- Add the clock enable/disable for clk_mac_speed.

Change in v2:
- Fix some error in commit title and message.

 .../devicetree/bindings/net/rockchip-dwmac.txt     |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c     | 69 ++++++++++++++++++++++
 2 files changed, 70 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
index 9c16ee2..3b71da7 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
@@ -4,6 +4,7 @@ The device node has following properties.
 
 Required properties:
  - compatible: should be "rockchip,<name>-gamc"
+   "rockchip,px30-gmac":   found on PX30 SoCs
    "rockchip,rk3128-gmac": found on RK312x SoCs
    "rockchip,rk3228-gmac": found on RK322x SoCs
    "rockchip,rk3288-gmac": found on RK3288 SoCs
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index f08625a..7b92336 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -61,6 +61,7 @@ struct rk_priv_data {
 	struct clk *mac_clk_tx;
 	struct clk *clk_mac_ref;
 	struct clk *clk_mac_refout;
+	struct clk *clk_mac_speed;
 	struct clk *aclk_mac;
 	struct clk *pclk_mac;
 	struct clk *clk_phy;
@@ -83,6 +84,64 @@ struct rk_priv_data {
 	(((tx) ? soc##_GMAC_TXCLK_DLY_ENABLE : soc##_GMAC_TXCLK_DLY_DISABLE) | \
 	 ((rx) ? soc##_GMAC_RXCLK_DLY_ENABLE : soc##_GMAC_RXCLK_DLY_DISABLE))
 
+#define PX30_GRF_GMAC_CON1		0x0904
+
+/* PX30_GRF_GMAC_CON1 */
+#define PX30_GMAC_PHY_INTF_SEL_RMII	(GRF_CLR_BIT(4) | GRF_CLR_BIT(5) | \
+					 GRF_BIT(6))
+#define PX30_GMAC_SPEED_10M		GRF_CLR_BIT(2)
+#define PX30_GMAC_SPEED_100M		GRF_BIT(2)
+
+static void px30_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+
+	if (IS_ERR(bsp_priv->grf)) {
+		dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+		return;
+	}
+
+	regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
+		     PX30_GMAC_PHY_INTF_SEL_RMII);
+}
+
+static void px30_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+	int ret;
+
+	if (IS_ERR(bsp_priv->clk_mac_speed)) {
+		dev_err(dev, "%s: Missing clk_mac_speed clock\n", __func__);
+		return;
+	}
+
+	if (speed == 10) {
+		regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
+			     PX30_GMAC_SPEED_10M);
+
+		ret = clk_set_rate(bsp_priv->clk_mac_speed, 2500000);
+		if (ret)
+			dev_err(dev, "%s: set clk_mac_speed rate 2500000 failed: %d\n",
+				__func__, ret);
+	} else if (speed == 100) {
+		regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
+			     PX30_GMAC_SPEED_100M);
+
+		ret = clk_set_rate(bsp_priv->clk_mac_speed, 25000000);
+		if (ret)
+			dev_err(dev, "%s: set clk_mac_speed rate 25000000 failed: %d\n",
+				__func__, ret);
+
+	} else {
+		dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
+	}
+}
+
+static const struct rk_gmac_ops px30_ops = {
+	.set_to_rmii = px30_set_to_rmii,
+	.set_rmii_speed = px30_set_rmii_speed,
+};
+
 #define RK3128_GRF_MAC_CON0	0x0168
 #define RK3128_GRF_MAC_CON1	0x016c
 
@@ -1042,6 +1101,10 @@ static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat)
 		}
 	}
 
+	bsp_priv->clk_mac_speed = devm_clk_get(dev, "clk_mac_speed");
+	if (IS_ERR(bsp_priv->clk_mac_speed))
+		dev_err(dev, "cannot get clock %s\n", "clk_mac_speed");
+
 	if (bsp_priv->clock_input) {
 		dev_info(dev, "clock input from PHY\n");
 	} else {
@@ -1094,6 +1157,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
 			if (!IS_ERR(bsp_priv->mac_clk_tx))
 				clk_prepare_enable(bsp_priv->mac_clk_tx);
 
+			if (!IS_ERR(bsp_priv->clk_mac_speed))
+				clk_prepare_enable(bsp_priv->clk_mac_speed);
+
 			/**
 			 * if (!IS_ERR(bsp_priv->clk_mac))
 			 *	clk_prepare_enable(bsp_priv->clk_mac);
@@ -1118,6 +1184,8 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
 			clk_disable_unprepare(bsp_priv->pclk_mac);
 
 			clk_disable_unprepare(bsp_priv->mac_clk_tx);
+
+			clk_disable_unprepare(bsp_priv->clk_mac_speed);
 			/**
 			 * if (!IS_ERR(bsp_priv->clk_mac))
 			 *	clk_disable_unprepare(bsp_priv->clk_mac);
@@ -1414,6 +1482,7 @@ static int rk_gmac_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(rk_gmac_pm_ops, rk_gmac_suspend, rk_gmac_resume);
 
 static const struct of_device_id rk_gmac_dwmac_match[] = {
+	{ .compatible = "rockchip,px30-gmac",	.data = &px30_ops   },
 	{ .compatible = "rockchip,rk3128-gmac", .data = &rk3128_ops },
 	{ .compatible = "rockchip,rk3228-gmac", .data = &rk3228_ops },
 	{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
-- 
2.7.4



             reply	other threads:[~2018-06-28  1:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-28  1:33 David Wu [this message]
2018-06-29 13:19 ` [PATCH v4] net: ethernet: stmmac: dwmac-rk: Add GMAC support for px30 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1530149601-23337-1-git-send-email-david.wu@rock-chips.com \
    --to=david.wu@rock-chips.com \
    --cc=davem@davemloft.net \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).