linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Madalin Bucur <madalin.bucur@nxp.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Madalin Bucur <madalin.bucur@nxp.com>
Subject: [net 2/2] dpaa_eth: DPAA SGT needs to be 256B
Date: Thu, 28 Jun 2018 15:26:51 +0300	[thread overview]
Message-ID: <1530188811-8918-3-git-send-email-madalin.bucur@nxp.com> (raw)
In-Reply-To: <1530188811-8918-1-git-send-email-madalin.bucur@nxp.com>

The DPAA HW requires that at least 256 bytes from the start of the
first scatter-gather table entry are allocated and accessible. The
hardware reads the maximum size the table can have in one access,
thus requiring that the allocation and mapping to be done for the
maximum size of 256B even if there is a smaller number of entries
in the table.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 52f4a6b..65a22cd 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -125,6 +125,9 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms");
 /* Default alignment for start of data in an Rx FD */
 #define DPAA_FD_DATA_ALIGNMENT  16
 
+/* The DPAA requires 256 bytes reserved and mapped for the SGT */
+#define DPAA_SGT_SIZE 256
+
 /* Values for the L3R field of the FM Parse Results
  */
 /* L3 Type field: First IP Present IPv4 */
@@ -1631,8 +1634,8 @@ static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv,
 
 	if (unlikely(qm_fd_get_format(fd) == qm_fd_sg)) {
 		nr_frags = skb_shinfo(skb)->nr_frags;
-		dma_unmap_single(dev, addr, qm_fd_get_offset(fd) +
-				 sizeof(struct qm_sg_entry) * (1 + nr_frags),
+		dma_unmap_single(dev, addr,
+				 qm_fd_get_offset(fd) + DPAA_SGT_SIZE,
 				 dma_dir);
 
 		/* The sgt buffer has been allocated with netdev_alloc_frag(),
@@ -1917,8 +1920,7 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
 	void *sgt_buf;
 
 	/* get a page frag to store the SGTable */
-	sz = SKB_DATA_ALIGN(priv->tx_headroom +
-		sizeof(struct qm_sg_entry) * (1 + nr_frags));
+	sz = SKB_DATA_ALIGN(priv->tx_headroom + DPAA_SGT_SIZE);
 	sgt_buf = netdev_alloc_frag(sz);
 	if (unlikely(!sgt_buf)) {
 		netdev_err(net_dev, "netdev_alloc_frag() failed for size %d\n",
@@ -1986,9 +1988,8 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
 	skbh = (struct sk_buff **)buffer_start;
 	*skbh = skb;
 
-	addr = dma_map_single(dev, buffer_start, priv->tx_headroom +
-			      sizeof(struct qm_sg_entry) * (1 + nr_frags),
-			      dma_dir);
+	addr = dma_map_single(dev, buffer_start,
+			      priv->tx_headroom + DPAA_SGT_SIZE, dma_dir);
 	if (unlikely(dma_mapping_error(dev, addr))) {
 		dev_err(dev, "DMA mapping failed");
 		err = -EINVAL;
-- 
2.1.0


  parent reply	other threads:[~2018-06-28 12:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-28 12:26 [net 0/2] DPAA fixes Madalin Bucur
2018-06-28 12:26 ` [net 1/2] fsl/fman: fix parser reporting bad checksum on short frames Madalin Bucur
2018-06-28 12:26 ` Madalin Bucur [this message]
2018-06-30  9:51 ` [net 0/2] DPAA fixes David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1530188811-8918-3-git-send-email-madalin.bucur@nxp.com \
    --to=madalin.bucur@nxp.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).