From: Peng Li <lipeng321@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linuxarm@huawei.com>, <yisen.zhuang@huawei.com>,
<salil.mehta@huawei.com>, <lipeng321@huawei.com>
Subject: [PATCH net-next 03/10] net: hns3: remove some redundant assignments
Date: Fri, 29 Jun 2018 19:22:58 +0800 [thread overview]
Message-ID: <1530271385-49668-4-git-send-email-lipeng321@huawei.com> (raw)
In-Reply-To: <1530271385-49668-1-git-send-email-lipeng321@huawei.com>
From: Huazhong Tan <tanhuazhong@huawei.com>
Remove some redundant assignments.
desc->flag = cpu_to_le16(HCLGE_CMD_FLAG_NO_INTR | HCLGE_CMD_FLAG_IN)
has set bit HCLGE_CMD_FLAG_WR to zero, so does others.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 2 --
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 8 --------
2 files changed, 10 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
index 969966c..054a913 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
@@ -110,8 +110,6 @@ void hclge_cmd_setup_basic_desc(struct hclge_desc *desc,
if (is_read)
desc->flag |= cpu_to_le16(HCLGE_CMD_FLAG_WR);
- else
- desc->flag &= cpu_to_le16(~HCLGE_CMD_FLAG_WR);
}
static void hclge_cmd_config_regs(struct hclge_cmq_ring *ring)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 14a6991..b7f6960 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2733,7 +2733,6 @@ int hclge_func_reset_cmd(struct hclge_dev *hdev, int func_id)
int ret;
hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_CFG_RST_TRIGGER, false);
- hnae_set_bit(req->mac_func_reset, HCLGE_CFG_RESET_MAC_B, 0);
hnae_set_bit(req->mac_func_reset, HCLGE_CFG_RESET_FUNC_B, 1);
req->fun_reset_vfid = func_id;
@@ -4264,16 +4263,9 @@ int hclge_add_uc_addr_common(struct hclge_vport *vport,
memset(&req, 0, sizeof(req));
hnae_set_bit(req.flags, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
- hnae_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
- hnae_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT1_EN_B, 0);
- hnae_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
- hnae_set_bit(egress_port, HCLGE_MAC_EPORT_SW_EN_B, 0);
- hnae_set_bit(egress_port, HCLGE_MAC_EPORT_TYPE_B, 0);
hnae_set_field(egress_port, HCLGE_MAC_EPORT_VFID_M,
HCLGE_MAC_EPORT_VFID_S, vport->vport_id);
- hnae_set_field(egress_port, HCLGE_MAC_EPORT_PFID_M,
- HCLGE_MAC_EPORT_PFID_S, 0);
req.egress_port = cpu_to_le16(egress_port);
--
1.9.1
next prev parent reply other threads:[~2018-06-29 10:54 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-29 11:22 [PATCH net-next 00/10] net: hns3: a few code improvements Peng Li
2018-06-29 11:22 ` [PATCH net-next 01/10] net: hns3: remove unused hclge_ring_to_dma_dir Peng Li
2018-06-29 11:22 ` [PATCH net-next 02/10] net: hns3: remove useless code in hclge_cmd_send Peng Li
2018-06-29 11:22 ` Peng Li [this message]
2018-06-29 11:22 ` [PATCH net-next 04/10] net: hns3: simplify hclge_cmd_csq_clean Peng Li
2018-06-29 11:23 ` [PATCH net-next 05/10] net: hns3: using modulo for cyclic counters in hclge_cmd_send Peng Li
2018-06-30 12:03 ` David Miller
2018-07-02 7:06 ` lipeng (Y)
2018-06-29 11:23 ` [PATCH net-next 06/10] net: hns3: remove a redundant hclge_cmd_csq_done Peng Li
2018-06-29 11:23 ` [PATCH net-next 07/10] net: hns3: remove some unused members of some structures Peng Li
2018-06-29 11:23 ` [PATCH net-next 08/10] net: hns3: give default option while dependency HNS3 set Peng Li
2018-06-29 11:23 ` [PATCH net-next 09/10] net: hns3: use dma_zalloc_coherent instead of kzalloc/dma_map_single Peng Li
2018-06-29 11:23 ` [PATCH net-next 10/10] net: hns3: modify hnae_ to hnae3_ Peng Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530271385-49668-4-git-send-email-lipeng321@huawei.com \
--to=lipeng321@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).