From: Vincent Guittot <vincent.guittot@linaro.org>
To: xuwei5@hisilicon.com, robh+dt@kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: leo.yan@linaro.org, daniel.lezcano@linaro.org,
Vincent Guittot <vincent.guittot@linaro.org>
Subject: [PATCH] arm64: hikey960: update idle-states
Date: Fri, 6 Jul 2018 08:57:26 +0200 [thread overview]
Message-ID: <1530860246-29072-1-git-send-email-vincent.guittot@linaro.org> (raw)
Update entry/exit latency and residency time of hikey960 to use more
realistic figures based on unitary tests done on the platform.
The complete results (in us) :
big cluster
cluster CPU
max entry latency 800 400
max exit latency 2900 550
residency 903Mhz 5000 1500
residency 2363Mhz 0 1500
little cluster
cluster CPU
max entry latency 500 400
max exit latency 1600 650
residency 533Mhz 8000 4500
residency 1844Mhz 0 1500
We can see that the residency time depends of the running OPP which is not
handled for now. Then we also have to take into account the constraint of
a residency time shorter than the tick to get full advantage of idle loop
reordering(tick is stopped if idle duration is higher than tick period).
Finally the selected residency value are :
big cluster
cluster CPU
residency 3700 1500
little cluster
cluster CPU
residency 3500 1500
A simple test with a task waking up every 11,111ms shows improvement:
- 5% a lowest OPP
- 22% at highest OPP
The period has been chosen:
- to be shorter than old cluster residency time and longer than new
residency time od cluster off C-state
- to prevent any sync with tick (4ms) when running tests that can add
some variances between tests
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 45 ++++++++++++++++++-------------
1 file changed, 27 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 421d454..890d23e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -61,7 +61,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
@@ -75,7 +75,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
@@ -87,7 +87,7 @@
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
@@ -99,7 +99,7 @@
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&A53_L2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <592>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
operating-points-v2 = <&cluster0_opp>;
@@ -111,7 +111,7 @@
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&A73_L2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
@@ -125,7 +125,7 @@
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&A73_L2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
@@ -137,7 +137,7 @@
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&A73_L2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
@@ -149,7 +149,7 @@
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&A73_L2>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+ cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
capacity-dmips-mhz = <1024>;
clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
operating-points-v2 = <&cluster1_opp>;
@@ -158,31 +158,40 @@
idle-states {
entry-method = "psci";
- CPU_SLEEP: cpu-sleep {
+ CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x0010000>;
- entry-latency-us = <40>;
- exit-latency-us = <70>;
- min-residency-us = <3000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <650>;
+ min-residency-us = <1500>;
};
-
CLUSTER_SLEEP_0: cluster-sleep-0 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x1010000>;
entry-latency-us = <500>;
- exit-latency-us = <5000>;
- min-residency-us = <20000>;
+ exit-latency-us = <1600>;
+ min-residency-us = <3500>;
+ };
+
+
+ CPU_SLEEP_1: cpu-sleep-1 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <550>;
+ min-residency-us = <1500>;
};
CLUSTER_SLEEP_1: cluster-sleep-1 {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x1010000>;
- entry-latency-us = <1000>;
- exit-latency-us = <5000>;
- min-residency-us = <20000>;
+ entry-latency-us = <800>;
+ exit-latency-us = <2900>;
+ min-residency-us = <3500>;
};
};
--
2.7.4
next reply other threads:[~2018-07-06 6:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-06 6:57 Vincent Guittot [this message]
2018-07-06 7:59 ` [PATCH] arm64: hikey960: update idle-states Daniel Lezcano
2018-07-08 14:01 ` leo.yan
2018-07-08 21:15 ` Daniel Lezcano
2018-07-08 23:26 ` leo.yan
2018-07-11 8:27 ` Vincent Guittot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530860246-29072-1-git-send-email-vincent.guittot@linaro.org \
--to=vincent.guittot@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).