[PATCH 00/25] selftests/ftrace: Improve ftracetest with coverage check

[PATCH 00/25] selftests/ftrace: Improve ftracetest with coverage check

[Masami Hiramatsu]

Hello,

Here is a series of patches for improving ftracetest testcase
using gcov/lcov. It is still in progress, and I have got good
improvement of line/function coverage under kernel/trace with
this series. (Note that this kernel enables ftrace startup
tests)

Without this series
Lines:		10156	17200	59.0 %
Functions:	1069	1772	60.3 %

With this series
Lines:		11130	17200	64.7 %
Functions:	1185	1772	66.9 %

Of course we don't need to make it 100%, because ftracetest
is a function/specification test, and there are functions and
lines which never be called (like critical error detection :) ).
Also, ftrace has some amount of code for perf and bpf subsystem
which should be tested by perf/bpf tests.
However, GCOV(LCOV) gives us a good insight into which
functions are covered or not covered by the test cases.

This series has some ftracetest framework improvements too,
which are for debugging ftracetest itself.

Tracing/Gcov-kernel:
 - Add CONFIG_GCOV_PROFILE_FRACE, which enables gcov profiling
   only on tracing subsystem (under kernel/trace/). This may not
   needed for everyone (like a debugging feature).
   So it can be dropped anyway.

Ftracetest framework improvements:
 - Add --stop-fail for detecting failure soon.
 - Add --console for interactively debugging a testcase by shell.
 - Add testcase-number prefix to logfile for finding log easier.
 - Improve general init function
 - Call general init function after all testcases.
 - Remove init/cleanup code from all testcase (since general init
   function will fixed it up)

Testcase fixes:
 - Fix to check $comm availability.
 - Make checkbashisms clean

Testcase improvements:
 - Use loopback address instead of localhost
 - Improve kprobe on module testcase to load/unload module
 - Improve kprobe testcase to check log data
 - Improve kretprobe testcase to check log data
 - Test kprobe-event argument with various bitsize
 - Check set_event_pid result

Adding testcases:
 - Add kprobe event with $comm argument testcase
 - Add kprobe profile testcase
 - Add kprobe-event with symbol argument test
 - Add nop tracer testcase
 - Add trace_printk sample module testcase
 - Add ringbuffer size changing testcase
 - Add function profiling statistics testcase
 - Add max stack tracer testcase
 - Add function filter on module testcase
 - Add trace_pipe testcase
 
TBD:
Following testcase improvements are remaining.
 - Checking of various supported types (like u8, u64 etc.)
   testcases
 - Filter actions for ftrace testcases

Thank you,

---

Masami Hiramatsu (25):
      tracing: Allow gcov profiling on only ftrace subsystem
      selftests/ftrace: Add --stop-fail hidden option for debug
      selftests/ftrace: Add --console hidden option
      selftests/ftrace: Add case number prefix to logfile
      selftests/ftrace: More initialize features in initialize_ftrace
      selftests/ftrace: Cleanup ftrace after running test
      selftests/ftrace: Remove unneeded per-test init/cleanup ftrace
      selftests/ftrace: Fix to test kprobe $comm arg only if available
      selftests/ftrace: Fix checkbashisms errors
      selftests/ftrace: Use loopback address instead of localhost
      selftests/ftrace: Improve kprobe on module testcase to load/unload module
      selftests/ftrace: Improve kprobe testcase to check log data
      selftests/ftrace: Improve kretprobe testcase to check log data
      selftests/ftrace: Test kprobe-event argument with various bitsize
      selftests/ftrace: Check set_event_pid result
      selftests/ftrace: Add kprobe event with $comm argument testcase
      selftests/ftrace: Add kprobe profile testcase
      selftests/ftrace: Add a testcase for nop tracer
      selftests/ftrace: Add kprobe-event with symbol argument test
      selftests/ftrace: Add trace_printk sample module test
      selftests/ftrace: Add ringbuffer size changing testcase
      selftests/ftrace: Add function profiling stat testcase
      selftests/ftrace: Add max stack tracer testcase
      selftests/ftrace: Add function filter on module testcase
      selftests/ftrace: Add trace_pipe testcase


 kernel/trace/Kconfig                               |   13 +++++
 kernel/trace/Makefile                              |    5 ++
 tools/testing/selftests/ftrace/config              |    5 ++
 tools/testing/selftests/ftrace/ftracetest          |   32 +++++++++++-
 .../ftrace/test.d/00basic/ringbuffer_size.tc       |   21 ++++++++
 .../selftests/ftrace/test.d/00basic/trace_pipe.tc  |   15 ++++++
 .../selftests/ftrace/test.d/event/event-enable.tc  |    8 ---
 .../selftests/ftrace/test.d/event/event-pid.tc     |    6 +-
 .../ftrace/test.d/event/subsystem-enable.tc        |    8 ---
 .../ftrace/test.d/event/toplevel-enable.tc         |    8 ---
 .../selftests/ftrace/test.d/event/trace_printk.tc  |   27 ++++++++++
 .../ftrace/test.d/ftrace/fgraph-filter-stack.tc    |    4 --
 .../ftrace/test.d/ftrace/fgraph-filter.tc          |    9 ---
 .../ftrace/test.d/ftrace/func-filter-pid.tc        |    8 ---
 .../ftrace/test.d/ftrace/func_event_triggers.tc    |    3 -
 .../ftrace/test.d/ftrace/func_mod_trace.tc         |   24 +++++++++
 .../ftrace/test.d/ftrace/func_profile_stat.tc      |   23 +++++++++
 .../ftrace/test.d/ftrace/func_profiler.tc          |    4 --
 .../ftrace/test.d/ftrace/func_set_ftrace_file.tc   |   13 -----
 .../ftrace/test.d/ftrace/func_stack_tracer.tc      |   39 +++++++++++++++
 .../test.d/ftrace/func_traceonoff_triggers.tc      |   11 ----
 tools/testing/selftests/ftrace/test.d/functions    |    4 ++
 .../ftrace/test.d/kprobe/add_and_remove.tc         |    3 -
 .../selftests/ftrace/test.d/kprobe/busy_check.tc   |    3 -
 .../selftests/ftrace/test.d/kprobe/kprobe_args.tc  |    8 ++-
 .../ftrace/test.d/kprobe/kprobe_args_comm.tc       |   17 +++++++
 .../ftrace/test.d/kprobe/kprobe_args_string.tc     |    5 --
 .../ftrace/test.d/kprobe/kprobe_args_symbol.tc     |   39 +++++++++++++++
 .../ftrace/test.d/kprobe/kprobe_args_syntax.tc     |    8 +--
 .../ftrace/test.d/kprobe/kprobe_args_type.tc       |   52 ++++++++++++--------
 .../ftrace/test.d/kprobe/kprobe_eventname.tc       |    5 --
 .../ftrace/test.d/kprobe/kprobe_ftrace.tc          |    9 ---
 .../ftrace/test.d/kprobe/kprobe_module.tc          |   36 ++++++++++++--
 .../ftrace/test.d/kprobe/kretprobe_args.tc         |    9 ++-
 .../ftrace/test.d/kprobe/kretprobe_maxactive.tc    |    4 --
 .../ftrace/test.d/kprobe/multiple_kprobes.tc       |    5 --
 .../selftests/ftrace/test.d/kprobe/probepoint.tc   |    4 --
 .../selftests/ftrace/test.d/kprobe/profile.tc      |   15 ++++++
 .../testing/selftests/ftrace/test.d/tracer/nop.tc  |   22 ++++++++
 .../inter-event/trigger-extended-error-support.tc  |   12 -----
 .../inter-event/trigger-field-variable-support.tc  |   15 ------
 .../trigger-inter-event-combined-hist.tc           |   15 ------
 .../inter-event/trigger-multi-actions-accept.tc    |   14 -----
 .../inter-event/trigger-onmatch-action-hist.tc     |   15 ------
 .../trigger-onmatch-onmax-action-hist.tc           |   15 ------
 .../inter-event/trigger-onmax-action-hist.tc       |   15 ------
 .../trigger-synthetic-event-createremove.tc        |   12 -----
 .../ftrace/test.d/trigger/trigger-eventonoff.tc    |   12 -----
 .../ftrace/test.d/trigger/trigger-filter.tc        |   14 -----
 .../ftrace/test.d/trigger/trigger-hist-mod.tc      |   12 -----
 .../ftrace/test.d/trigger/trigger-hist.tc          |   12 -----
 .../ftrace/test.d/trigger/trigger-multihist.tc     |   16 ------
 .../ftrace/test.d/trigger/trigger-snapshot.tc      |   12 -----
 .../ftrace/test.d/trigger/trigger-stacktrace.tc    |   12 -----
 .../test.d/trigger/trigger-trace-marker-hist.tc    |   11 ----
 .../trigger/trigger-trace-marker-snapshot.tc       |   16 +-----
 .../trigger-trace-marker-synthetic-kernel.tc       |   12 -----
 .../trigger/trigger-trace-marker-synthetic.tc      |   12 -----
 .../ftrace/test.d/trigger/trigger-traceonoff.tc    |   12 -----
 59 files changed, 388 insertions(+), 412 deletions(-)
 create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_size.tc
 create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/trace_pipe.tc
 create mode 100644 tools/testing/selftests/ftrace/test.d/event/trace_printk.tc
 create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc
 create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_profile_stat.tc
 create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
 create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc
 create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc
 create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
 create mode 100644 tools/testing/selftests/ftrace/test.d/tracer/nop.tc

--
Masami Hiramatsu (Linaro)

[PATCH 01/25] tracing: Allow gcov profiling on only ftrace subsystem

[Masami Hiramatsu]

Add GCOV_PROFILE_FTRACE to allow gcov profiling
on only files in ftrace subsystem. This kconfig
flag will be used for checking kselftest/ftrace
coverage.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 kernel/trace/Kconfig  |   13 +++++++++++++
 kernel/trace/Makefile |    5 +++++
 2 files changed, 18 insertions(+)

diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index a47f77d27673..a628e8cbc1ef 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -722,6 +722,19 @@ config TRACING_EVENTS_GPIO
 	help
 	  Enable tracing events for gpio subsystem
 
+config GCOV_PROFILE_FTRACE
+	bool "Enable GCOV profiling on ftrace subsystem"
+	depends on GCOV_KERNEL
+	help
+	  Enable GCOV profiling on ftrace subsystem for checking
+	  which functions/lines are tested.
+
+	  If unsure, say N.
+
+	  Note that on a kernel compiled with this flags, ftrace will be
+	  significantly run slower. So do not enable it for production
+	  kernel.
+
 endif # FTRACE
 
 endif # TRACING_SUPPORT
diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
index e2538c7638d4..443d53392f61 100644
--- a/kernel/trace/Makefile
+++ b/kernel/trace/Makefile
@@ -18,6 +18,11 @@ ifdef CONFIG_TRACING_BRANCHES
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 endif
 
+# for GCOV coverage profiling
+ifdef CONFIG_GCOV_PROFILE_FTRACE
+GCOV_PROFILE := y
+endif
+
 CFLAGS_trace_benchmark.o := -I$(src)
 CFLAGS_trace_events_filter.o := -I$(src)
 

[PATCH 02/25] selftests/ftrace: Add --stop-fail hidden option for debug

[Masami Hiramatsu]

Add --stop-fail option for debugging the ftracetest.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 tools/testing/selftests/ftrace/ftracetest |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest
index f9a9d424c980..c9c7fa8dc440 100755
--- a/tools/testing/selftests/ftrace/ftracetest
+++ b/tools/testing/selftests/ftrace/ftracetest
@@ -69,6 +69,10 @@ parse_opts() { # opts
       DEBUG=1
       shift 1
     ;;
+    --stop-fail)
+      STOP_FAILURE=1
+      shift 1
+    ;;
     --fail-unsupported)
       UNSUPPORTED_RESULT=1
       shift 1
@@ -117,6 +121,7 @@ KEEP_LOG=0
 DEBUG=0
 VERBOSE=0
 UNSUPPORTED_RESULT=0
+STOP_FAILURE=0
 # Parse command-line options
 parse_opts $*
 
@@ -304,6 +309,10 @@ run_test() { # testfile
 # Main loop
 for t in $TEST_CASES; do
   run_test $t
+  if [ $STOP_FAILURE -ne 0 -a $TOTAL_RESULT -ne 0 ]; then
+    echo "A failure detected. Stop test."
+    exit 1
+  fi
 done
 
 # Test on instance loop
@@ -315,6 +324,10 @@ for t in $TEST_CASES; do
   run_test $t
   rmdir $TRACING_DIR
   TRACING_DIR=$SAVED_TRACING_DIR
+  if [ $STOP_FAILURE -ne 0 -a $TOTAL_RESULT -ne 0 ]; then
+    echo "A failure detected. Stop test."
+    exit 1
+  fi
 done
 
 prlog ""

[PATCH 03/25] selftests/ftrace: Add --console hidden option

[Masami Hiramatsu]

Add --console hidden option for debug test cases.
This option allows to put "sh" or something else
when the test case hits a bug.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 tools/testing/selftests/ftrace/ftracetest |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest
index c9c7fa8dc440..8debd37038e4 100755
--- a/tools/testing/selftests/ftrace/ftracetest
+++ b/tools/testing/selftests/ftrace/ftracetest
@@ -60,11 +60,21 @@ parse_opts() { # opts
       shift 1
     ;;
     --verbose|-v|-vv|-vvv)
+      if [ $VERBOSE -eq -1 ]; then
+	usage "--console can not use with --verbose"
+      fi
       VERBOSE=$((VERBOSE + 1))
       [ $1 = '-vv' ] && VERBOSE=$((VERBOSE + 1))
       [ $1 = '-vvv' ] && VERBOSE=$((VERBOSE + 2))
       shift 1
     ;;
+    --console)
+      if [ $VERBOSE -ne 0 ]; then
+	usage "--console can not use with --verbose"
+      fi
+      VERBOSE=-1
+      shift 1
+    ;;
     --debug|-d)
       DEBUG=1
       shift 1
@@ -283,7 +293,9 @@ run_test() { # testfile
   testcase $1
   echo "execute$INSTANCE: "$1 > $testlog
   SIG_RESULT=0
-  if [ -z "$LOG_FILE" ]; then
+  if [ $VERBOSE -eq -1 ]; then
+    __run_test $1
+  elif [ -z "$LOG_FILE" ]; then
     __run_test $1 2>&1
   elif [ $VERBOSE -ge 3 ]; then
     __run_test $1 | tee -a $testlog 2>&1

[PATCH 04/25] selftests/ftrace: Add case number prefix to logfile

[Masami Hiramatsu]

Add a case number prefix to each logfile. This makes
it easier to find which logfile is corresponding
to which failure.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 tools/testing/selftests/ftrace/ftracetest |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest
index 8debd37038e4..3ca596255eff 100755
--- a/tools/testing/selftests/ftrace/ftracetest
+++ b/tools/testing/selftests/ftrace/ftracetest
@@ -284,13 +284,13 @@ __run_test() { # testfile
 # Run one test case
 run_test() { # testfile
   local testname=`basename $1`
+  testcase $1
   if [ ! -z "$LOG_FILE" ] ; then
-    local testlog=`mktemp $LOG_DIR/${testname}-log.XXXXXX`
+    local testlog=`mktemp $LOG_DIR/${CASENO}-${testname}-log.XXXXXX`
   else
     local testlog=/proc/self/fd/1
   fi
   export TMPDIR=`mktemp -d /tmp/ftracetest-dir.XXXXXX`
-  testcase $1
   echo "execute$INSTANCE: "$1 > $testlog
   SIG_RESULT=0
   if [ $VERBOSE -eq -1 ]; then

[PATCH 05/25] selftests/ftrace: More initialize features in initialize_ftrace

[Masami Hiramatsu]

Clear pid filter, synthetic_events, snapshots,
and trace log in initialize_ftrace(), since
those are used in test cases.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 tools/testing/selftests/ftrace/test.d/functions |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions
index e4645d5e3126..f17eaf3582b2 100644
--- a/tools/testing/selftests/ftrace/test.d/functions
+++ b/tools/testing/selftests/ftrace/test.d/functions
@@ -91,10 +91,14 @@ initialize_ftrace() { # Reset ftrace to initial-state
     reset_events_filter
     disable_events
     echo > set_event_pid	# event tracer is always on
+    echo > set_ftrace_pid
     [ -f set_ftrace_filter ] && echo | tee set_ftrace_*
     [ -f set_graph_function ] && echo | tee set_graph_*
     [ -f stack_trace_filter ] && echo > stack_trace_filter
     [ -f kprobe_events ] && echo > kprobe_events
     [ -f uprobe_events ] && echo > uprobe_events
+    [ -f synthetic_events ] && echo > synthetic_events
+    [ -f snapshot ] && echo 0 > snapshot
+    clear_trace
     enable_tracing
 }

[PATCH 06/25] selftests/ftrace: Cleanup ftrace after running test

[Masami Hiramatsu]

Cleanup ftrace by initialize_ftrace() after running
all test cases. This means we also don't need cleanup
ftrace on each test case, except for some special
options.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 tools/testing/selftests/ftrace/ftracetest |    1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest
index 3ca596255eff..5c71d58febb2 100755
--- a/tools/testing/selftests/ftrace/ftracetest
+++ b/tools/testing/selftests/ftrace/ftracetest
@@ -341,6 +341,7 @@ for t in $TEST_CASES; do
     exit 1
   fi
 done
+(cd $TRACING_DIR; initialize_ftrace) # for cleanup
 
 prlog ""
 prlog "# of passed: " `echo $PASSED_CASES | wc -w`

[PATCH 07/25] selftests/ftrace: Remove unneeded per-test init/cleanup ftrace

[Masami Hiramatsu]

Since ftracetest framework calls initialize_ftrace() right before
each test and after all tests, we don't need to init/cleanup
ftrace for each test case.
Just remove such unneeded init/cleanup code because it can
increase logfile size.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../selftests/ftrace/test.d/event/event-enable.tc  |    6 ------
 .../selftests/ftrace/test.d/event/event-pid.tc     |    3 +--
 .../ftrace/test.d/event/subsystem-enable.tc        |    6 ------
 .../ftrace/test.d/event/toplevel-enable.tc         |    6 ------
 .../ftrace/test.d/ftrace/fgraph-filter-stack.tc    |    4 ----
 .../ftrace/test.d/ftrace/fgraph-filter.tc          |    9 ---------
 .../ftrace/test.d/ftrace/func-filter-pid.tc        |    6 ------
 .../ftrace/test.d/ftrace/func_event_triggers.tc    |    3 ---
 .../ftrace/test.d/ftrace/func_profiler.tc          |    4 ----
 .../ftrace/test.d/ftrace/func_set_ftrace_file.tc   |   13 -------------
 .../test.d/ftrace/func_traceonoff_triggers.tc      |   11 -----------
 .../ftrace/test.d/kprobe/add_and_remove.tc         |    3 ---
 .../selftests/ftrace/test.d/kprobe/busy_check.tc   |    3 ---
 .../selftests/ftrace/test.d/kprobe/kprobe_args.tc  |    2 --
 .../ftrace/test.d/kprobe/kprobe_args_string.tc     |    5 -----
 .../ftrace/test.d/kprobe/kprobe_args_syntax.tc     |    5 -----
 .../ftrace/test.d/kprobe/kprobe_args_type.tc       |    4 ----
 .../ftrace/test.d/kprobe/kprobe_eventname.tc       |    5 -----
 .../ftrace/test.d/kprobe/kprobe_ftrace.tc          |    9 ---------
 .../ftrace/test.d/kprobe/kprobe_module.tc          |    5 -----
 .../ftrace/test.d/kprobe/kretprobe_args.tc         |    2 --
 .../ftrace/test.d/kprobe/kretprobe_maxactive.tc    |    4 ----
 .../ftrace/test.d/kprobe/multiple_kprobes.tc       |    5 -----
 .../selftests/ftrace/test.d/kprobe/probepoint.tc   |    4 ----
 .../inter-event/trigger-extended-error-support.tc  |   12 ------------
 .../inter-event/trigger-field-variable-support.tc  |   13 -------------
 .../trigger-inter-event-combined-hist.tc           |   13 -------------
 .../inter-event/trigger-multi-actions-accept.tc    |   14 --------------
 .../inter-event/trigger-onmatch-action-hist.tc     |   13 -------------
 .../trigger-onmatch-onmax-action-hist.tc           |   13 -------------
 .../inter-event/trigger-onmax-action-hist.tc       |   13 -------------
 .../trigger-synthetic-event-createremove.tc        |   12 ------------
 .../ftrace/test.d/trigger/trigger-eventonoff.tc    |   12 ------------
 .../ftrace/test.d/trigger/trigger-filter.tc        |   14 --------------
 .../ftrace/test.d/trigger/trigger-hist-mod.tc      |   12 ------------
 .../ftrace/test.d/trigger/trigger-hist.tc          |   12 ------------
 .../ftrace/test.d/trigger/trigger-multihist.tc     |   16 ----------------
 .../ftrace/test.d/trigger/trigger-snapshot.tc      |   12 ------------
 .../ftrace/test.d/trigger/trigger-stacktrace.tc    |   12 ------------
 .../test.d/trigger/trigger-trace-marker-hist.tc    |   11 -----------
 .../trigger/trigger-trace-marker-snapshot.tc       |   12 ------------
 .../trigger-trace-marker-synthetic-kernel.tc       |   12 ------------
 .../trigger/trigger-trace-marker-synthetic.tc      |   12 ------------
 .../ftrace/test.d/trigger/trigger-traceonoff.tc    |   12 ------------
 44 files changed, 1 insertion(+), 378 deletions(-)

diff --git a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
index 9daf034186f5..386dbddbdc11 100644
--- a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
@@ -9,7 +9,6 @@ do_reset() {
 }
 
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -23,9 +22,6 @@ if [ ! -f set_event -o ! -d events/sched ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 echo 'sched:sched_switch' > set_event
 
 yield
@@ -57,6 +53,4 @@ if [ $count -ne 0 ]; then
     fail "sched_switch events should not be recorded"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/event/event-pid.tc b/tools/testing/selftests/ftrace/test.d/event/event-pid.tc
index 132478b305c2..6dbf67544fde 100644
--- a/tools/testing/selftests/ftrace/test.d/event/event-pid.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/event-pid.tc
@@ -30,8 +30,7 @@ if [ ! -f set_event_pid ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
+echo 0 > options/event-fork
 
 echo 1 > events/sched/sched_switch/enable
 
diff --git a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
index 6a37a8642ee6..10eb17f161b7 100644
--- a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
@@ -9,7 +9,6 @@ do_reset() {
 }
 
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -23,9 +22,6 @@ if [ ! -f set_event -o ! -d events/sched ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 echo 'sched:*' > set_event
 
 yield
@@ -57,6 +53,4 @@ if [ $count -ne 0 ]; then
     fail "any of scheduler events should not be recorded"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
index 4e9b6e2c0219..8d55a233c1a4 100644
--- a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
@@ -8,7 +8,6 @@ do_reset() {
 }
 
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -22,9 +21,6 @@ if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 echo '*:*' > set_event
 
 yield
@@ -60,6 +56,4 @@ if [ $count -ne 0 ]; then
     fail "any of events should not be recorded"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
index 1aec99d108eb..aefab0c66d54 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
@@ -16,13 +16,9 @@ if [ ! -f set_ftrace_filter ]; then
 fi
 
 do_reset() {
-    reset_tracer
     if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then
 	    echo 0 > /proc/sys/kernel/stack_tracer_enabled
     fi
-    enable_tracing
-    clear_trace
-    echo > set_ftrace_filter
 }
 
 fail() { # msg
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
index 9f8d27ca39cf..c8a5209f2119 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
@@ -9,14 +9,7 @@ if ! grep -q function_graph available_tracers; then
     exit_unsupported
 fi
 
-do_reset() {
-    reset_tracer
-    enable_tracing
-    clear_trace
-}
-
 fail() { # msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -48,6 +41,4 @@ if [ $count -eq 0 ]; then
     fail "No schedule traces found?"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc
index 524ce24b3c22..970903cb7834 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc
@@ -35,12 +35,6 @@ if [ $do_function_fork -eq 1 ]; then
 fi
 
 do_reset() {
-    reset_tracer
-    clear_trace
-    enable_tracing
-    echo > set_ftrace_filter
-    echo > set_ftrace_pid
-
     if [ $do_function_fork -eq 0 ]; then
 	return
     fi
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
index 6fed4cf2db81..ca2ffd7957f9 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc
@@ -25,15 +25,12 @@ do_reset() {
 }
 
 fail() { # mesg
-    do_reset
     echo $1
     exit_fail
 }
 
 SLEEP_TIME=".1"
 
-do_reset
-
 echo "Testing function probes with events:"
 
 EVENT="sched:sched_switch"
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
index b2d5a8febfe8..dfbae637c60c 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
@@ -29,8 +29,6 @@ if [ ! -f function_profile_enabled ]; then
 fi
 
 fail() { # mesg
-    reset_tracer
-    echo > set_ftrace_filter
     echo $1
     exit_fail
 }
@@ -76,6 +74,4 @@ if ! grep -v -e '^#' -e 'schedule' trace > /dev/null; then
 	fail "no other functions besides schedule was found"
 fi
 
-reset_tracer
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc
index 68e7a48f5828..51f6e6146bd9 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_set_ftrace_file.tc
@@ -15,22 +15,11 @@ if [ ! -f set_ftrace_filter ]; then
     exit_unsupported
 fi
 
-do_reset() {
-    reset_tracer
-    reset_ftrace_filter
-    disable_events
-    clear_trace
-    enable_tracing
-}
-
 fail() { # mesg
-    do_reset
     echo $1
     exit_fail
 }
 
-do_reset
-
 FILTER=set_ftrace_filter
 FUNC1="schedule"
 FUNC2="do_softirq"
@@ -165,6 +154,4 @@ test_actual
 rm $TMPDIR/expected
 rm $TMPDIR/actual
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc
index f6d9ac73268a..0c04282d33dd 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_traceonoff_triggers.tc
@@ -16,24 +16,13 @@ if [ ! -f set_ftrace_filter ]; then
     exit_unsupported
 fi
 
-do_reset() {
-    reset_ftrace_filter
-    reset_tracer
-    disable_events
-    clear_trace
-    enable_tracing
-}
-
 fail() { # mesg
-    do_reset
     echo $1
     exit_fail
 }
 
 SLEEP_TIME=".1"
 
-do_reset
-
 echo "Testing function probes with enabling disabling tracing:"
 
 cnt_trace() {
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc b/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc
index 4604d2103c89..bb1eb5a7c64e 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc
@@ -4,10 +4,7 @@
 
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
-echo 0 > events/enable
-echo > kprobe_events
 echo p:myevent _do_fork > kprobe_events
 grep myevent kprobe_events
 test -d events/kprobes/myevent
 echo > kprobe_events
-clear_trace
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc b/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc
index bbc443a9190c..442c1a8c5edf 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc
@@ -4,12 +4,9 @@
 
 [ -f kprobe_events ] || exit_unsupported
 
-echo 0 > events/enable
-echo > kprobe_events
 echo p:myevent _do_fork > kprobe_events
 test -d events/kprobes/myevent
 echo 1 > events/kprobes/myevent/enable
 echo > kprobe_events && exit_fail # this must fail
 echo 0 > events/kprobes/myevent/enable
 echo > kprobe_events # this must succeed
-clear_trace
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc
index 8b43c6804fc3..9578535ccd67 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc
@@ -4,8 +4,6 @@
 
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
-echo 0 > events/enable
-echo > kprobe_events
 echo 'p:testprobe _do_fork $stack $stack0 +0($stack)' > kprobe_events
 grep testprobe kprobe_events
 test -d events/kprobes/testprobe
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc
index 1ad70cdaf442..46e7744f8358 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc
@@ -4,9 +4,6 @@
 
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
-echo 0 > events/enable
-echo > kprobe_events
-
 case `uname -m` in
 x86_64)
   ARG1=%di
@@ -44,5 +41,3 @@ echo 1 > events/kprobes/testprobe/enable
 echo "p:test _do_fork" >> kprobe_events
 grep -qe "testprobe.* arg1=\"test\" arg2=\"test\"" trace
 
-echo 0 > events/enable
-echo > kprobe_events
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
index d026ff4e562f..d783a8ce0692 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
@@ -6,9 +6,6 @@
 
 grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
 
-echo 0 > events/enable
-echo > kprobe_events
-
 PROBEFUNC="vfs_read"
 GOODREG=
 BADREG=
@@ -100,5 +97,3 @@ test_badarg "${GOODREG}::${GOODTYPE}" "${GOODREG}:${BADTYPE}" \
 
 test_goodarg "\$comm:string" "+0(\$stack):string"
 test_badarg "\$comm:x64" "\$stack:string" "${GOODREG}:string"
-
-echo > kprobe_events
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
index 2a1755bfc290..37443dd23d15 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
@@ -6,10 +6,6 @@
 
 grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
 
-echo 0 > events/enable
-echo > kprobe_events
-enable_tracing
-
 echo 'p:testprobe _do_fork $stack0:s32 $stack0:u32 $stack0:x32 $stack0:b8@4/32' > kprobe_events
 grep testprobe kprobe_events
 test -d events/kprobes/testprobe
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc
index 2724a1068cb1..3fb70e01b1fe 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_eventname.tc
@@ -4,9 +4,6 @@
 
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
-disable_events
-echo > kprobe_events
-
 :;: "Add an event on function without name" ;:
 
 FUNC=`grep " [tT] .*vfs_read$" /proc/kallsyms | tail -n 1 | cut -f 3 -d " "`
@@ -33,5 +30,3 @@ echo "p $FUNC" > kprobe_events
 EVENT=`grep $FUNC kprobe_events | cut -f 1 -d " " | cut -f 2 -d:`
 [ "x" != "x$EVENT" ] || exit_failure
 test -d events/$EVENT || exit_failure
-
-echo > kprobe_events
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc
index cc4cac0e60f2..492426e95e09 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc
@@ -8,8 +8,6 @@ grep function available_tracers || exit_unsupported # this is configurable
 # prepare
 echo nop > current_tracer
 echo _do_fork > set_ftrace_filter
-echo 0 > events/enable
-echo > kprobe_events
 echo 'p:testprobe _do_fork' > kprobe_events
 
 # kprobe on / ftrace off
@@ -47,10 +45,3 @@ echo > trace
 ( echo "forked")
 grep testprobe trace
 ! grep '_do_fork <-' trace
-
-# cleanup
-echo nop > current_tracer
-echo > set_ftrace_filter
-echo 0 > events/kprobes/testprobe/enable
-echo > kprobe_events
-echo > trace
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
index 1e9f75f7a30f..ec6c5fffef1e 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
@@ -4,9 +4,6 @@
 
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
-disable_events
-echo > kprobe_events
-
 :;: "Add an event on a module function without specifying event name" ;:
 
 MOD=`lsmod | head -n 2 | tail -n 1 | cut -f1 -d" "`
@@ -25,5 +22,3 @@ test -d events/kprobes/event1 || exit_failure
 
 echo "p:kprobes1/event1 $MOD:$FUNC" > kprobe_events
 test -d events/kprobes1/event1 || exit_failure
-
-echo > kprobe_events
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc
index 321954683aaa..4c6b21e30b02 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc
@@ -4,8 +4,6 @@
 
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
-echo 0 > events/enable
-echo > kprobe_events
 echo 'r:testprobe2 _do_fork $retval' > kprobe_events
 grep testprobe2 kprobe_events
 test -d events/kprobes/testprobe2
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_maxactive.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_maxactive.tc
index 7c0290684c43..8e05b178519a 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_maxactive.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_maxactive.tc
@@ -5,8 +5,6 @@
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 grep -q 'r\[maxactive\]' README || exit_unsupported # this is older version
 
-echo > kprobe_events
-
 # Test if we successfully reject unknown messages
 if echo 'a:myprobeaccept inet_csk_accept' > kprobe_events; then false; else true; fi
 
@@ -37,5 +35,3 @@ echo > kprobe_events
 echo 'r10 inet_csk_accept' > kprobe_events
 grep inet_csk_accept kprobe_events
 echo > kprobe_events
-
-clear_trace
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
index ce361b9d62cf..5862eee91e1d 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/multiple_kprobes.tc
@@ -12,11 +12,6 @@ case `uname -m` in
   *) OFFS=0;;
 esac
 
-if [ -d events/kprobes ]; then
-  echo 0 > events/kprobes/enable
-  echo > kprobe_events
-fi
-
 N=0
 echo "Setup up kprobes on first available 256 text symbols"
 grep -i " t " /proc/kallsyms | cut -f3 -d" " | grep -v .*\\..* | \
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc b/tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc
index 4fda01a08da4..0f3182ccf516 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc
@@ -30,8 +30,6 @@ if [ `printf "%x" -1 | wc -c` != 9 ]; then
   UINT_TEST=yes
 fi
 
-echo 0 > events/enable
-echo > kprobe_events
 echo "p:testprobe ${TARGET_FUNC}" > kprobe_events
 echo "p:testprobe ${TARGET}" > kprobe_events
 echo "p:testprobe ${TARGET_FUNC}${NEXT}" > kprobe_events
@@ -39,5 +37,3 @@ echo "p:testprobe ${TARGET_FUNC}${NEXT}" > kprobe_events
 if [ "${UINT_TEST}" = yes ]; then
 ! echo "p:testprobe ${TARGET_FUNC}${OVERFLOW}" > kprobe_events
 fi
-echo > kprobe_events
-clear_trace
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc
index 2aabab363cfb..401104344593 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc
@@ -2,14 +2,7 @@
 # description: event trigger - test extended error support
 
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -24,9 +17,6 @@ if [ ! -f synthetic_events ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 echo "Test extended error support"
 echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger
 ! echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_wakeup/trigger 2> /dev/null
@@ -34,6 +24,4 @@ if ! grep -q "ERROR:" events/sched/sched_wakeup/hist; then
     fail "Failed to generate extended error in histogram"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc
index 7fd5b4a8f060..575af23df04e 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc
@@ -1,14 +1,7 @@
 #!/bin/sh
 # description: event trigger - test field variable support
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
     exit_unsupported
 fi
 
-clear_synthetic_events
-reset_tracer
-do_reset
-
 echo "Test field variable support"
 
 echo 'wakeup_latency u64 lat; pid_t pid; int prio; char comm[16]' > synthetic_events
@@ -49,6 +38,4 @@ if grep -q "synthetic_prio=prio" events/sched/sched_waking/hist; then
     fail "Failed to remove histogram with field variable"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc
index c93dbe38b5df..92aef26e2631 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc
@@ -1,14 +1,7 @@
 #!/bin/sh
 # description: event trigger - test inter-event combined histogram trigger
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-clear_synthetic_events
-
 echo "Test create synthetic event"
 
 echo 'waking_latency  u64 lat pid_t pid' > synthetic_events
@@ -53,6 +42,4 @@ if ! grep -q "pid:" events/synthetic/waking+wakeup_latency/hist; then
     fail "Failed to create combined histogram"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-multi-actions-accept.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-multi-actions-accept.tc
index c193dce611a2..4ddc546771b5 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-multi-actions-accept.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-multi-actions-accept.tc
@@ -1,15 +1,7 @@
 #!/bin/sh
 # description: event trigger - test multiple actions on hist trigger
 
-
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -24,10 +16,6 @@ if [ ! -f synthetic_events ]; then
     exit_unsupported
 fi
 
-clear_synthetic_events
-reset_tracer
-do_reset
-
 echo "Test multiple actions on hist trigger"
 echo 'wakeup_latency u64 lat; pid_t pid' >> synthetic_events
 TRIGGER1=events/sched/sched_wakeup/trigger
@@ -39,6 +27,4 @@ echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_
 echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> $TRIGGER2
 echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> $TRIGGER2
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc
index e84e7d048566..1ef5dd4521f0 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc
@@ -1,14 +1,7 @@
 #!/bin/sh
 # description: event trigger - test inter-event histogram trigger onmatch action
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
     exit_unsupported
 fi
 
-clear_synthetic_events
-reset_tracer
-do_reset
-
 echo "Test create synthetic event"
 
 echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -45,6 +34,4 @@ if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then
     fail "Failed to create onmatch action inter-event histogram"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc
index 7907d8aacde3..7234683ee5e5 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc
@@ -1,14 +1,7 @@
 #!/bin/sh
 # description: event trigger - test inter-event histogram trigger onmatch-onmax action
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
     exit_unsupported
 fi
 
-clear_synthetic_events
-reset_tracer
-do_reset
-
 echo "Test create synthetic event"
 
 echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -45,6 +34,4 @@ if [ ! grep -q "ping" events/synthetic/wakeup_latency/hist -o ! grep -q "max:" e
     fail "Failed to create onmatch-onmax action inter-event histogram"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc
index 38b7ed6242b2..55b9630a1d70 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc
@@ -1,14 +1,7 @@
 #!/bin/sh
 # description: event trigger - test inter-event histogram trigger onmax action
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
     exit_unsupported
 fi
 
-clear_synthetic_events
-reset_tracer
-do_reset
-
 echo "Test create synthetic event"
 
 echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -43,6 +32,4 @@ if ! grep -q "max:" events/sched/sched_switch/hist; then
     fail "Failed to create onmax action inter-event histogram"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc
index cef11377dcbd..8d647fb572dd 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc
@@ -1,13 +1,7 @@
 #!/bin/sh
 # description: event trigger - test synthetic event create remove
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
 
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -22,10 +16,6 @@ if [ ! -f synthetic_events ]; then
     exit_unsupported
 fi
 
-clear_synthetic_events
-reset_tracer
-do_reset
-
 echo "Test create synthetic event"
 
 echo 'wakeup_latency  u64 lat pid_t pid char comm[16]' > synthetic_events
@@ -49,6 +39,4 @@ if [ -d events/synthetic/wakeup_latency ]; then
     fail "Failed to delete wakeup_latency synthetic event"
 fi
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-eventonoff.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-eventonoff.tc
index 28cc355a3a7b..eddb51e1fbf7 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-eventonoff.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-eventonoff.tc
@@ -3,14 +3,7 @@
 # description: event trigger - test event enable/disable trigger
 # flags: instance
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -25,9 +18,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 FEATURE=`grep enable_event events/sched/sched_process_fork/trigger`
 if [ -z "$FEATURE" ]; then
     echo "event enable/disable trigger is not supported"
@@ -61,6 +51,4 @@ echo 'enable_event:sched:sched_switch' > events/sched/sched_process_fork/trigger
 ! echo 'enable_event:sched:sched_switch' > events/sched/sched_process_fork/trigger
 ! echo 'disable_event:sched:sched_switch' > events/sched/sched_process_fork/trigger
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-filter.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-filter.tc
index a48e23eb8a8b..2dcc2296ebdd 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-filter.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-filter.tc
@@ -3,14 +3,7 @@
 # description: event trigger - test trigger filter
 # flags: instance
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -25,9 +18,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 echo "Test trigger filter"
 echo 1 > tracing_on
 echo 'traceoff if child_pid == 0' > events/sched/sched_process_fork/trigger
@@ -54,8 +44,4 @@ echo '!traceoff' > events/sched/sched_process_fork/trigger
 echo 'traceoff if parent_pid >= 0 || child_pid >= 0' > events/sched/sched_process_fork/trigger
 echo '!traceoff' > events/sched/sched_process_fork/trigger
 
-
-
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-mod.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-mod.tc
index 8da80efc44d8..fab4431639d3 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-mod.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-hist-mod.tc
@@ -3,14 +3,7 @@
 # description: event trigger - test histogram modifiers
 # flags: instance
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -30,9 +23,6 @@ if [ ! -f events/sched/sched_process_fork/hist ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 echo "Test histogram with execname modifier"
 
 echo 'hist:keys=common_pid.execname' > events/sched/sched_process_fork/trigger
@@ -71,6 +61,4 @@ for i in `seq 1 10` ; do ( echo "forked" > /dev/null); done
 grep 'bytes_req: ~ 2^[0-9]*' events/kmem/kmalloc/hist > /dev/null || \
     fail "log2 modifier on kmem/kmalloc did not work"
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-hist.tc
index 449fe9ff91a2..177e8d4c4744 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-hist.tc
@@ -3,14 +3,7 @@
 # description: event trigger - test histogram trigger
 # flags: instance
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -30,9 +23,6 @@ if [ ! -f events/sched/sched_process_fork/hist ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 echo "Test histogram basic tigger"
 
 echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
@@ -79,6 +69,4 @@ check_inc `grep -o "child_pid:[[:space:]]*[[:digit:]]*" \
     events/sched/sched_process_fork/hist | cut -d: -f2 ` ||
     fail "sort param on sched_process_fork did not work"
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-multihist.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-multihist.tc
index c5ef8b9d02b3..18fdaab9f570 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-multihist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-multihist.tc
@@ -3,14 +3,7 @@
 # description: event trigger - test multiple histogram triggers
 # flags: instance
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -30,11 +23,6 @@ if [ ! -f events/sched/sched_process_fork/hist ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
-reset_trigger
-
 echo "Test histogram multiple tiggers"
 
 echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
@@ -67,8 +55,4 @@ grep test_hist events/sched/sched_process_exit/hist > /dev/null || \
 diffs=`diff events/sched/sched_process_exit/hist events/sched/sched_process_fork/hist | wc -l`
 test $diffs -eq 0 || fail "Same name histograms are not same"
 
-reset_trigger
-
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-snapshot.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-snapshot.tc
index ed38f0050d77..7717c0a09686 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-snapshot.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-snapshot.tc
@@ -2,14 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test snapshot-trigger
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -29,9 +22,6 @@ if [ ! -f snapshot ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 FEATURE=`grep snapshot events/sched/sched_process_fork/trigger`
 if [ -z "$FEATURE" ]; then
     echo "snapshot trigger is not supported"
@@ -57,6 +47,4 @@ echo "Test snapshot semantic errors"
 echo "snapshot" > events/sched/sched_process_fork/trigger
 ! echo "snapshot" > events/sched/sched_process_fork/trigger
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-stacktrace.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-stacktrace.tc
index 3121d795a868..398c05c4d2a7 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-stacktrace.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-stacktrace.tc
@@ -2,14 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test stacktrace-trigger
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -24,9 +17,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 FEATURE=`grep stacktrace events/sched/sched_process_fork/trigger`
 if [ -z "$FEATURE" ]; then
     echo "stacktrace trigger is not supported"
@@ -49,6 +39,4 @@ echo "Test stacktrace semantic errors"
 echo "stacktrace" > events/sched/sched_process_fork/trigger
 ! echo "stacktrace" > events/sched/sched_process_fork/trigger
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-hist.tc
index 2acbfe2c0c0c..ab6bedb25736 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-hist.tc
@@ -3,14 +3,7 @@
 # description: trace_marker trigger - test histogram trigger
 # flags: instance
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -35,8 +28,6 @@ if [ ! -f events/ftrace/print/hist ]; then
     exit_unsupported
 fi
 
-do_reset
-
 echo "Test histogram trace_marker tigger"
 
 echo 'hist:keys=common_pid' > events/ftrace/print/trigger
@@ -44,6 +35,4 @@ for i in `seq 1 10` ; do echo "hello" > trace_marker; done
 grep 'hitcount: *10$' events/ftrace/print/hist > /dev/null || \
     fail "hist trigger did not trigger correct times on trace_marker"
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc
index 6748e8cb42d0..79ce7d51350b 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc
@@ -3,15 +3,7 @@
 # description: trace_marker trigger - test snapshot trigger
 # flags: instance
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    echo 0 > snapshot
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -54,8 +46,6 @@ test_trace() {
     done
 }
 
-do_reset
-
 echo "Test snapshot trace_marker tigger"
 
 echo 'snapshot' > events/ftrace/print/trigger
@@ -69,6 +59,4 @@ for i in `seq 1 10` ; do echo "hello >$i<" > trace_marker; done
 test_trace trace 1
 test_trace snapshot 2
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic-kernel.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic-kernel.tc
index 0a69c5d1cda8..18b4d1c2807e 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic-kernel.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic-kernel.tc
@@ -3,15 +3,7 @@
 # description: trace_marker trigger - test histogram with synthetic event against kernel event
 # flags:
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    echo > synthetic_events
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -46,8 +38,6 @@ if [ ! -f events/ftrace/print/hist ]; then
     exit_unsupported
 fi
 
-do_reset
-
 echo "Test histogram kernel event to trace_marker latency histogram trigger"
 
 echo 'latency u64 lat' > synthetic_events
@@ -63,6 +53,4 @@ grep 'hitcount: *1$' events/ftrace/print/hist > /dev/null || \
 grep 'hitcount: *1$' events/synthetic/latency/hist > /dev/null || \
     fail "hist trigger did not trigger "
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic.tc
index 3666dd6ab02a..dd262d6d0db6 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-synthetic.tc
@@ -3,15 +3,7 @@
 # description: trace_marker trigger - test histogram with synthetic event
 # flags:
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    echo > synthetic_events
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -41,8 +33,6 @@ if [ ! -f events/ftrace/print/hist ]; then
     exit_unsupported
 fi
 
-do_reset
-
 echo "Test histogram trace_marker to trace_marker latency histogram trigger"
 
 echo 'latency u64 lat' > synthetic_events
@@ -61,6 +51,4 @@ fi
 grep 'hitcount: *1$' events/synthetic/latency/hist > /dev/null || \
     fail "hist trigger did not trigger "
 
-do_reset
-
 exit 0
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-traceonoff.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-traceonoff.tc
index c59d9eb546da..d5d2dcbc9cab 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-traceonoff.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-traceonoff.tc
@@ -2,14 +2,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # description: event trigger - test traceon/off trigger
 
-do_reset() {
-    reset_trigger
-    echo > set_event
-    clear_trace
-}
-
 fail() { #msg
-    do_reset
     echo $1
     exit_fail
 }
@@ -24,9 +17,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then
     exit_unsupported
 fi
 
-reset_tracer
-do_reset
-
 echo "Test traceoff trigger"
 echo 1 > tracing_on
 echo 'traceoff' > events/sched/sched_process_fork/trigger
@@ -54,6 +44,4 @@ echo 'traceon' > events/sched/sched_process_fork/trigger
 ! echo 'traceon' > events/sched/sched_process_fork/trigger
 ! echo 'traceoff' > events/sched/sched_process_fork/trigger
 
-do_reset
-
 exit 0

[PATCH 08/25] selftests/ftrace: Fix to test kprobe $comm arg only if available

[Masami Hiramatsu]

Test $comm in kprobe-event argument syntax testcase
only if it is supported on the kernel because
$comm has been introduced 4.8 kernel.
So on older stable kernel, it should be skipped.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../ftrace/test.d/kprobe/kprobe_args_syntax.tc     |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
index d783a8ce0692..6f0f19953193 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
@@ -75,8 +75,11 @@ test_badarg "\$stackp" "\$stack0+10" "\$stack1-10"
 echo "r ${PROBEFUNC} \$retval" > kprobe_events
 ! echo "p ${PROBEFUNC} \$retval" > kprobe_events
 
+# $comm was introduced in 4.8, older kernels reject it.
+if grep -A1 "fetcharg:" README | grep -q '\$comm' ; then
 : "Comm access"
 test_goodarg "\$comm"
+fi
 
 : "Indirect memory access"
 test_goodarg "+0(${GOODREG})" "-0(${GOODREG})" "+10(\$stack)" \

[PATCH 09/25] selftests/ftrace: Fix checkbashisms errors

[Masami Hiramatsu]

Fix a test case to make checkbashisms clean.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../trigger/trigger-trace-marker-snapshot.tc       |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc
index 79ce7d51350b..df246e505af7 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-trace-marker-snapshot.tc
@@ -39,10 +39,10 @@ test_trace() {
 	fi
 	echo "testing $line for >$x<"
 	match=`echo $line | sed -e "s/>$x<//"`
-	if [ "$line" == "$match" ]; then
+	if [ "$line" = "$match" ]; then
 	    fail "$line does not have >$x< in it"
 	fi
-	let x=$x+2
+	x=$((x+2))
     done
 }
 

[PATCH 10/25] selftests/ftrace: Use loopback address instead of localhost

[Masami Hiramatsu]

Use raw loopback address instead of localhost, because
"localhost" can depend on nsswitch and in some case
we can not resolve the localhost.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../selftests/ftrace/test.d/event/event-enable.tc  |    2 +-
 .../selftests/ftrace/test.d/event/event-pid.tc     |    2 +-
 .../ftrace/test.d/event/subsystem-enable.tc        |    2 +-
 .../ftrace/test.d/event/toplevel-enable.tc         |    2 +-
 .../ftrace/test.d/ftrace/func-filter-pid.tc        |    2 +-
 .../inter-event/trigger-field-variable-support.tc  |    2 +-
 .../trigger-inter-event-combined-hist.tc           |    2 +-
 .../inter-event/trigger-onmatch-action-hist.tc     |    2 +-
 .../trigger-onmatch-onmax-action-hist.tc           |    2 +-
 .../inter-event/trigger-onmax-action-hist.tc       |    2 +-
 10 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
index 386dbddbdc11..a028628cdd0e 100644
--- a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
@@ -14,7 +14,7 @@ fail() { #msg
 }
 
 yield() {
-    ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
+    ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1
 }
 
 if [ ! -f set_event -o ! -d events/sched ]; then
diff --git a/tools/testing/selftests/ftrace/test.d/event/event-pid.tc b/tools/testing/selftests/ftrace/test.d/event/event-pid.tc
index 6dbf67544fde..6d2897f6a106 100644
--- a/tools/testing/selftests/ftrace/test.d/event/event-pid.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/event-pid.tc
@@ -17,7 +17,7 @@ fail() { #msg
 }
 
 yield() {
-    ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
+    ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1
 }
 
 if [ ! -f set_event -o ! -d events/sched ]; then
diff --git a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
index 10eb17f161b7..9f0221b39d4d 100644
--- a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
@@ -14,7 +14,7 @@ fail() { #msg
 }
 
 yield() {
-    ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
+    ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1
 }
 
 if [ ! -f set_event -o ! -d events/sched ]; then
diff --git a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
index 8d55a233c1a4..5f3611047d3a 100644
--- a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
@@ -13,7 +13,7 @@ fail() { #msg
 }
 
 yield() {
-    ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
+    ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1
 }
 
 if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then
diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc
index 970903cb7834..cd52cf6a1fc4 100644
--- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-pid.tc
@@ -49,7 +49,7 @@ fail() { # msg
 }
 
 yield() {
-    ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
+    ping 127.0.0.1 -c 1 || sleep .001 || usleep 1 || sleep 1
 }
 
 do_test() {
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc
index 575af23df04e..59b58c77e9ce 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc
@@ -23,7 +23,7 @@ echo 'hist:keys=comm:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/
 echo 'hist:keys=next_comm:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,sched.sched_waking.prio,next_comm) if next_comm=="ping"' > events/sched/sched_switch/trigger
 echo 'hist:keys=pid,prio,comm:vals=lat:sort=pid,prio' > events/synthetic/wakeup_latency/trigger
 
-ping localhost -c 3
+ping 127.0.0.1 -c 3
 if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then
     fail "Failed to create inter-event histogram"
 fi
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc
index 92aef26e2631..0a7709fdfd8e 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc
@@ -37,7 +37,7 @@ echo 'waking+wakeup_latency u64 lat; pid_t pid' >> synthetic_events
 echo 'hist:keys=pid,lat:sort=pid,lat:ww_lat=$waking_lat+$wakeup_lat:onmatch(synthetic.wakeup_latency).waking+wakeup_latency($ww_lat,pid)' >> events/synthetic/wakeup_latency/trigger
 echo 'hist:keys=pid,lat:sort=pid,lat' >> events/synthetic/waking+wakeup_latency/trigger
 
-ping localhost -c 3
+ping 127.0.0.1 -c 3
 if ! grep -q "pid:" events/synthetic/waking+wakeup_latency/hist; then
     fail "Failed to create combined histogram"
 fi
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc
index 1ef5dd4521f0..c5bdf8338aeb 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc
@@ -29,7 +29,7 @@ echo "Test histogram variables,simple expression support and onmatch action"
 echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger
 echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > events/sched/sched_switch/trigger
 echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > events/synthetic/wakeup_latency/trigger
-ping localhost -c 5
+ping 127.0.0.1 -c 5
 if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then
     fail "Failed to create onmatch action inter-event histogram"
 fi
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc
index 7234683ee5e5..47cb76bfd9c0 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc
@@ -29,7 +29,7 @@ echo "Test histogram variables,simple expression support and onmatch-onmax actio
 echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger
 echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid,next_comm):onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) if next_comm=="ping"' >> events/sched/sched_switch/trigger
 echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > events/synthetic/wakeup_latency/trigger
-ping localhost -c 5
+ping 127.0.0.1 -c 5
 if [ ! grep -q "ping" events/synthetic/wakeup_latency/hist -o ! grep -q "max:" events/sched/sched_switch/hist]; then
     fail "Failed to create onmatch-onmax action inter-event histogram"
 fi
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc
index 55b9630a1d70..6fa0c449035c 100644
--- a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc
@@ -27,7 +27,7 @@ echo "Test onmax action"
 
 echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_waking/trigger
 echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) if next_comm=="ping"' >> events/sched/sched_switch/trigger
-ping localhost -c 3
+ping 127.0.0.1 -c 3
 if ! grep -q "max:" events/sched/sched_switch/hist; then
     fail "Failed to create onmax action inter-event histogram"
 fi

[PATCH 11/25] selftests/ftrace: Improve kprobe on module testcase to load/unload module

[Masami Hiramatsu]

Improve kprobe events on module testcase to check module
load/unload with disabled/enabled events. This also change
the target module to trace_printk.ko, so it depends on
CONFIG_SAMPLE_TRACE_PRINTK=m.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 tools/testing/selftests/ftrace/config              |    4 ++
 .../ftrace/test.d/kprobe/kprobe_module.tc          |   35 ++++++++++++++++++--
 2 files changed, 36 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/ftrace/config b/tools/testing/selftests/ftrace/config
index b01924c71c09..766669592173 100644
--- a/tools/testing/selftests/ftrace/config
+++ b/tools/testing/selftests/ftrace/config
@@ -4,3 +4,7 @@ CONFIG_FUNCTION_PROFILER=y
 CONFIG_TRACER_SNAPSHOT=y
 CONFIG_STACK_TRACER=y
 CONFIG_HIST_TRIGGERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SAMPLES=y
+CONFIG_SAMPLE_TRACE_PRINTK=m
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
index ec6c5fffef1e..1efe9e616bc4 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
@@ -4,11 +4,18 @@
 
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
+rmmod trace-printk ||:
+if ! modprobe trace-printk.ko ; then
+  echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=
+m"
+  exit_unresolved;
+fi
+
+MOD=trace_printk
+FUNC=trace_printk_irq_work
+
 :;: "Add an event on a module function without specifying event name" ;:
 
-MOD=`lsmod | head -n 2 | tail -n 1 | cut -f1 -d" "`
-FUNC=`grep -m 1 ".* t .*\\[$MOD\\]" /proc/kallsyms | xargs | cut -f3 -d" "`
-[ "x" != "x$MOD" -a "y" != "y$FUNC" ] || exit_unresolved
 echo "p $MOD:$FUNC" > kprobe_events
 PROBE_NAME=`echo $MOD:$FUNC | tr ".:" "_"`
 test -d events/kprobes/p_${PROBE_NAME}_0 || exit_failure
@@ -22,3 +29,25 @@ test -d events/kprobes/event1 || exit_failure
 
 echo "p:kprobes1/event1 $MOD:$FUNC" > kprobe_events
 test -d events/kprobes1/event1 || exit_failure
+
+:;: "Remove target module, but event still be there" ;:
+if ! rmmod trace-printk ; then
+  echo "Failed to unload module - please enable CONFIG_MODULE_UNLOAD"
+  exit_unresolved;
+fi
+test -d events/kprobes1/event1
+
+:;: "Check posibility to defining events on unloaded module";:
+echo "p:event2 $MOD:$FUNC" >> kprobe_events
+
+:;: "Target is gone, but we can prepare for next time";:
+echo 1 > events/kprobes1/event1/enable
+
+:;: "Load module again, which means the event1 should be recorded";:
+modprobe trace-printk.ko
+grep "event1:" trace
+
+:;: "Remove the module again and check the event is not locked"
+rmmod trace-printk
+echo 0 > events/kprobes1/event1/enable
+echo "-:kprobes1/event1" >> kprobe_events

[PATCH 12/25] selftests/ftrace: Improve kprobe testcase to check log data

[Masami Hiramatsu]

Improve kprobe testcase to check the log data correctness
and ensure the event definition is corrctly including
argument definition.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../selftests/ftrace/test.d/kprobe/kprobe_args.tc  |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc
index 9578535ccd67..bcdecf80a8f1 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc
@@ -5,10 +5,14 @@
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
 echo 'p:testprobe _do_fork $stack $stack0 +0($stack)' > kprobe_events
-grep testprobe kprobe_events
+grep testprobe kprobe_events | grep -q 'arg1=\$stack arg2=\$stack0 arg3=+0(\$stack)'
 test -d events/kprobes/testprobe
+
 echo 1 > events/kprobes/testprobe/enable
 ( echo "forked")
+grep testprobe trace | grep '_do_fork' | \
+  grep -q 'arg1=0x[[:xdigit:]]* arg2=0x[[:xdigit:]]* arg3=0x[[:xdigit:]]*$'
+
 echo 0 > events/kprobes/testprobe/enable
 echo "-:testprobe" >> kprobe_events
 clear_trace

[PATCH 13/25] selftests/ftrace: Improve kretprobe testcase to check log data

[Masami Hiramatsu]

Improve kretprobe testcase to check the log data correctness
and ensure the event definition is corrctly including
argument definition.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../ftrace/test.d/kprobe/kretprobe_args.tc         |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc
index 4c6b21e30b02..ac9ab4a12e53 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc
@@ -4,11 +4,16 @@
 
 [ -f kprobe_events ] || exit_unsupported # this is configurable
 
+# Add new kretprobe event
 echo 'r:testprobe2 _do_fork $retval' > kprobe_events
-grep testprobe2 kprobe_events
+grep testprobe2 kprobe_events | grep -q 'arg1=\$retval'
 test -d events/kprobes/testprobe2
+
 echo 1 > events/kprobes/testprobe2/enable
 ( echo "forked")
+
+cat trace | grep testprobe2 | grep -q '<- _do_fork'
+
 echo 0 > events/kprobes/testprobe2/enable
 echo '-:testprobe2' >> kprobe_events
 clear_trace

[PATCH 14/25] selftests/ftrace: Test kprobe-event argument with various bitsize

[Masami Hiramatsu]

Improve the kprobe-event with argument types testcase
to test it with various bitsize.
kprobe-event argument can be recorded in given types with
various bitsize (8, 16, 32, 64), thus the type testcase
should test the different bitsize too.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../ftrace/test.d/kprobe/kprobe_args_type.tc       |   48 +++++++++++++-------
 1 file changed, 32 insertions(+), 16 deletions(-)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
index 37443dd23d15..1bcb67dcae26 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
@@ -6,29 +6,45 @@
 
 grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
 
-echo 'p:testprobe _do_fork $stack0:s32 $stack0:u32 $stack0:x32 $stack0:b8@4/32' > kprobe_events
-grep testprobe kprobe_events
-test -d events/kprobes/testprobe
-
-echo 1 > events/kprobes/testprobe/enable
-( echo "forked")
-echo 0 > events/kprobes/testprobe/enable
-ARGS=`tail -n 1 trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
+gen_event() { # Bitsize
+  echo "p:testprobe _do_fork \$stack0:s$1 \$stack0:u$1 \$stack0:x$1 \$stack0:b4@4/$1"
+}
 
-check_types() {
-  X1=`printf "%x" $1 | tail -c 8`
+check_types() { # s-type u-type x-type bf-type width
+  test $# -eq 5
+  CW=$5
+  CW=$((CW / 4))
+  X1=`printf "%x" $1 | tail -c ${CW}`
   X2=`printf "%x" $2`
   X3=`printf "%x" $3`
   test $X1 = $X2
   test $X2 = $X3
   test 0x$X3 = $3
 
-  B4=`printf "%02x" $4`
-  B3=`echo -n $X3 | tail -c 3 | head -c 2`
+  B4=`printf "%1x" $4`
+  B3=`printf "%03x" 0x$X3 | tail -c 2 | head -c 1`
   test $B3 = $B4
 }
-check_types $ARGS
 
-echo "-:testprobe" >> kprobe_events
-clear_trace
-test -d events/kprobes/testprobe && exit_fail || exit_pass
+for width in 64 32 16 8; do
+  : "Add new event with basic types"
+  gen_event $width > kprobe_events
+  grep testprobe kprobe_events
+  test -d events/kprobes/testprobe
+
+  : "Trace the event"
+  echo 1 > events/kprobes/testprobe/enable
+  ( echo "forked")
+  echo 0 > events/kprobes/testprobe/enable
+
+  : "Confirm the arguments is recorded in given types correctly"
+  ARGS=`grep "testprobe" trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
+  check_types $ARGS $width
+
+  : "Clear event for next loop"
+  echo "-:testprobe" >> kprobe_events
+  clear_trace
+
+done
+
+exit_pass

[PATCH 15/25] selftests/ftrace: Check set_event_pid result

[Masami Hiramatsu]

Ensure the set_event_pid shows set pid list.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../selftests/ftrace/test.d/event/event-pid.tc     |    1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/ftrace/test.d/event/event-pid.tc b/tools/testing/selftests/ftrace/test.d/event/event-pid.tc
index 6d2897f6a106..4ecbd9b69ec6 100644
--- a/tools/testing/selftests/ftrace/test.d/event/event-pid.tc
+++ b/tools/testing/selftests/ftrace/test.d/event/event-pid.tc
@@ -46,6 +46,7 @@ do_reset
 read mypid rest < /proc/self/stat
 
 echo $mypid > set_event_pid
+grep -q $mypid set_event_pid
 echo 'sched:sched_switch' > set_event
 
 yield

[PATCH 16/25] selftests/ftrace: Add kprobe event with $comm argument testcase

[Masami Hiramatsu]

Add kprobe-event with $comm argument testcase to
ftracetest. This not only checks syntax but
also checks log file.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../ftrace/test.d/kprobe/kprobe_args_comm.tc       |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc
new file mode 100644
index 000000000000..15c1f70fcaf9
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_comm.tc
@@ -0,0 +1,17 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Kprobe event with comm arguments
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+grep -A1 "fetcharg:" README | grep -q "\$comm" || exit_unsupported # this is too old
+
+echo 'p:testprobe _do_fork comm=$comm ' > kprobe_events
+grep testprobe kprobe_events | grep -q 'comm=$comm'
+test -d events/kprobes/testprobe
+
+echo 1 > events/kprobes/testprobe/enable
+( echo "forked")
+grep testprobe trace | grep -q 'comm=".*"'
+
+exit 0

[PATCH 17/25] selftests/ftrace: Add kprobe profile testcase

[Masami Hiramatsu]

Add a testcase for testing kprobe_profile interface
which provides per-kprobe event hit/misshit counts.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../selftests/ftrace/test.d/kprobe/profile.tc      |   15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/profile.tc

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
new file mode 100644
index 000000000000..0384b525cdee
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/profile.tc
@@ -0,0 +1,15 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Kprobe dynamic event - adding and removing
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+! grep -q 'myevent' kprobe_profile
+echo p:myevent _do_fork > kprobe_events
+grep -q 'myevent[[:space:]]*0[[:space:]]*0$' kprobe_profile
+echo 1 > events/kprobes/myevent/enable
+( echo "forked" )
+grep -q 'myevent[[:space:]]*[[:digit:]]*[[:space:]]*0$' kprobe_profile
+echo 0 > events/kprobes/myevent/enable
+echo > kprobe_events
+! grep -q 'myevent' kprobe_profile

[PATCH 18/25] selftests/ftrace: Add a testcase for nop tracer

[Masami Hiramatsu]

Add a testcase for nop tracer. This tracer has 2 test
options, so check it too.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../testing/selftests/ftrace/test.d/tracer/nop.tc  |   22 ++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/tracer/nop.tc

diff --git a/tools/testing/selftests/ftrace/test.d/tracer/nop.tc b/tools/testing/selftests/ftrace/test.d/tracer/nop.tc
new file mode 100644
index 000000000000..ca63e316e0f5
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/tracer/nop.tc
@@ -0,0 +1,22 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Test nop tracer
+
+# nop must be supported always
+grep -q "nop" available_tracers
+
+echo "nop" > current_tracer
+
+# nop provides 2 test options
+grep -q "test_nop_accept" trace_options
+grep -q "test_nop_refuse" trace_options
+
+# nop_accept always success
+echo "test_nop_accept" > trace_options
+echo "notest_nop_accept" > trace_options
+
+# nop_refuse always failed
+! echo "test_nop_refuse" > trace_options
+! echo "notest_nop_refuse" > trace_options
+
+exit 0

[PATCH 19/25] selftests/ftrace: Add kprobe-event with symbol argument test

[Masami Hiramatsu]

Add a testcase for kprobe-event with @symbol argument.
Since @symbol needs to refer the kernel data symbol
(linux_proc_banner), it requires CONFIG_KALLSYMS_ALL.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 tools/testing/selftests/ftrace/config              |    1 +
 .../ftrace/test.d/kprobe/kprobe_args_symbol.tc     |   39 ++++++++++++++++++++
 2 files changed, 40 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc

diff --git a/tools/testing/selftests/ftrace/config b/tools/testing/selftests/ftrace/config
index 766669592173..4c7d90aa97b2 100644
--- a/tools/testing/selftests/ftrace/config
+++ b/tools/testing/selftests/ftrace/config
@@ -8,3 +8,4 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_SAMPLES=y
 CONFIG_SAMPLE_TRACE_PRINTK=m
+CONFIG_KALLSYMS_ALL=y
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc
new file mode 100644
index 000000000000..2b6dd33f9076
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_symbol.tc
@@ -0,0 +1,39 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Kprobe event symbol argument
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+SYMBOL="linux_proc_banner"
+
+if [ ! -f /proc/kallsyms ]; then
+  echo "Can not check the target symbol - please enable CONFIG_KALLSYMS"
+  exit_unresolved
+elif ! grep "$SYMBOL\$" /proc/kallsyms; then
+  echo "Linux banner is not exported - please enable CONFIG_KALLSYMS_ALL"
+  exit_unresolved
+fi
+
+: "Test get basic types symbol argument"
+echo "p:testprobe_u _do_fork arg1=@linux_proc_banner:u64 arg2=@linux_proc_banner:u32 arg3=@linux_proc_banner:u16 arg4=@linux_proc_banner:u8" > kprobe_events
+echo "p:testprobe_s _do_fork arg1=@linux_proc_banner:s64 arg2=@linux_proc_banner:s32 arg3=@linux_proc_banner:s16 arg4=@linux_proc_banner:s8" >> kprobe_events
+if grep -q "x8/16/32/64" README; then
+  echo "p:testprobe_x _do_fork arg1=@linux_proc_banner:x64 arg2=@linux_proc_banner:x32 arg3=@linux_proc_banner:x16 arg4=@linux_proc_banner:x8" >> kprobe_events
+fi
+echo "p:testprobe_bf _do_fork arg1=@linux_proc_banner:b8@4/32" >> kprobe_events
+echo 1 > events/kprobes/enable
+(echo "forked")
+echo 0 > events/kprobes/enable
+grep "testprobe_[usx]:.* arg1=.* arg2=.* arg3=.* arg4=.*" trace
+grep "testprobe_bf:.* arg1=.*" trace
+
+: "Test get string symbol argument"
+echo "p:testprobe_str _do_fork arg1=@linux_proc_banner:string" > kprobe_events
+echo 1 > events/kprobes/enable
+(echo "forked")
+echo 0 > events/kprobes/enable
+RESULT=`grep "testprobe_str" trace | sed -e 's/.* arg1=\(.*\)/\1/'`
+
+RESULT=`echo $RESULT | sed -e 's/.* \((.*)\) \((.*)\) .*/\1 \2/'`
+ORIG=`cat /proc/version | sed -e 's/.* \((.*)\) \((.*)\) .*/\1 \2/'`
+test "$RESULT" = "$ORIG"

[PATCH 20/25] selftests/ftrace: Add trace_printk sample module test

[Masami Hiramatsu]

Add trace_printk sample module test. This requires to
enable trace_printk.ko module for test.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../selftests/ftrace/test.d/event/trace_printk.tc  |   27 ++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/event/trace_printk.tc

diff --git a/tools/testing/selftests/ftrace/test.d/event/trace_printk.tc b/tools/testing/selftests/ftrace/test.d/event/trace_printk.tc
new file mode 100644
index 000000000000..4da4d739f03d
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/event/trace_printk.tc
@@ -0,0 +1,27 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Test trace_printk from module
+
+rmmod trace-printk ||:
+if ! modprobe trace-printk.ko ; then
+  echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=m"
+  exit_unresolved;
+fi
+
+echo "Waiting for irq work"
+sleep 1
+
+grep -q ": This .* trace_bputs" trace
+grep -q ": This .* trace_puts" trace
+grep -q ": This .* trace_bprintk" trace
+grep -q ": This .* trace_printk" trace
+
+grep -q ": (irq) .* trace_bputs" trace
+grep -q ": (irq) .* trace_puts" trace
+grep -q ": (irq) .* trace_bprintk" trace
+grep -q ": (irq) .* trace_printk" trace
+
+grep -q "This is a %s that will use trace_bprintk" printk_formats
+grep -q "(irq) This is a static string that will use trace_bputs" printk_formats
+
+rmmod trace-printk ||:

[PATCH 21/25] selftests/ftrace: Add ringbuffer size changing testcase

[Masami Hiramatsu]

Add a testcase for changing ringbuffer size. This tests
not only ringbuffer size but also tests the imbalance
per-cpu buffer size change too.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../ftrace/test.d/00basic/ringbuffer_size.tc       |   21 ++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_size.tc

diff --git a/tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_size.tc b/tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_size.tc
new file mode 100644
index 000000000000..9224f33b3194
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/00basic/ringbuffer_size.tc
@@ -0,0 +1,21 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Change the ringbuffer size
+
+rb_size_test() {
+ORIG=`cat buffer_size_kb`
+
+expr $ORIG / 2 > buffer_size_kb
+
+expr $ORIG \* 2 > buffer_size_kb
+
+echo $ORIG > buffer_size_kb
+}
+
+rb_size_test
+
+: "If per-cpu buffer is supported, imbalance it"
+if [ -d per_cpu/cpu0 ]; then
+  cd per_cpu/cpu0
+  rb_size_test
+fi

[PATCH 22/25] selftests/ftrace: Add function profiling stat testcase

[Masami Hiramatsu]

Add a testcase for function profiling per-cpu statistics
interface. There is already func_profile.tc, but that is
mainly focusing on the combination of function-profiler
and function tracer. This testcase ensures trace_stat
per-cpu function statistics is correctly updated.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../ftrace/test.d/ftrace/func_profile_stat.tc      |   23 ++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_profile_stat.tc

diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_profile_stat.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_profile_stat.tc
new file mode 100644
index 000000000000..1d2440d80ec3
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_profile_stat.tc
@@ -0,0 +1,23 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: ftrace - function profiling
+
+[ ! -f function_profile_enabled ] && exit_unsupported
+
+: "Enable function profile"
+echo 1 > function_profile_enabled
+
+: "Profile must be updated"
+cp trace_stat/function0 $TMPDIR/
+( echo "forked"; sleep 1 )
+: "diff returns 0 if there is no difference"
+! diff trace_stat/function0 $TMPDIR/function0
+
+echo 0 > function_profile_enabled
+
+: "Profile must NOT be updated"
+cp trace_stat/function0 $TMPDIR/
+( echo "forked"; sleep 1 )
+: "diff returns 0 if there is no difference"
+diff trace_stat/function0 $TMPDIR/function0
+

[PATCH 23/25] selftests/ftrace: Add max stack tracer testcase

[Masami Hiramatsu]

Add a testcase for max stack tracer, which checks basic
max stack usage tracing and its filter feature.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../ftrace/test.d/ftrace/func_stack_tracer.tc      |   39 ++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc

diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
new file mode 100644
index 000000000000..b414f0e3c646
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
@@ -0,0 +1,39 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: ftrace - Max stack tracer
+# Test the basic function of max-stack usage tracing
+
+if [ ! -f stack_trace ]; then
+  echo "Max stack tracer is not supported - please make CONFIG_STACK_TRACER=y"
+  exit_unsupported
+fi
+
+echo > stack_trace_filter
+echo 0 > stack_max_size
+echo 1 > /proc/sys/kernel/stack_tracer_enabled
+
+: "Fork and wait for the first entry become !lock"
+timeout=10
+while [ $timeout -ne 0 ]; do
+  ( echo "forked" )
+  FL=`grep " 0)" stack_trace`
+  echo $FL | grep -q "lock" || break;
+  timeout=$((timeout - 1))
+done
+echo 0 > /proc/sys/kernel/stack_tracer_enabled
+
+echo '*lock*' > stack_trace_filter
+test `cat stack_trace_filter | wc -l` -eq `grep lock stack_trace_filter | wc -l`
+
+echo 0 > stack_max_size
+echo 1 > /proc/sys/kernel/stack_tracer_enabled
+
+: "Fork and always the first entry including lock"
+timeout=10
+while [ $timeout -ne 0 ]; do
+  ( echo "forked" )
+  FL=`grep " 0)" stack_trace`
+  echo $FL | grep -q "lock"
+  timeout=$((timeout - 1))
+done
+echo 0 > /proc/sys/kernel/stack_tracer_enabled

[PATCH 24/25] selftests/ftrace: Add function filter on module testcase

[Masami Hiramatsu]

Add a testcase for function filter on module.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../ftrace/test.d/ftrace/func_mod_trace.tc         |   24 ++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc

diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc
new file mode 100644
index 000000000000..359380c3834f
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_mod_trace.tc
@@ -0,0 +1,24 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: ftrace - function trace on module
+
+[ ! -f set_ftrace_filter ] && exit_unsupported
+
+: "mod: allows to filter a non exist function"
+echo 'non_exist_func:mod:non_exist_module' > set_ftrace_filter
+grep -q "non_exist_func" set_ftrace_filter
+
+: "mod: on exist module"
+echo '*:mod:trace_printk' > set_ftrace_filter
+if ! modprobe trace-printk.ko ; then
+  echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=
+m"
+  exit_unresolved;
+fi
+
+: "Wildcard should be resolved after loading module"
+grep -q "trace_printk_irq_work" set_ftrace_filter
+
+: "After removing the filter becomes empty"
+rmmod trace_printk
+test `cat set_ftrace_filter | wc -l` -eq 0

[PATCH 25/25] selftests/ftrace: Add trace_pipe testcase

[Masami Hiramatsu]

Add a simple testcase for trace_pipe which can consume
ringbuffer.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
 .../selftests/ftrace/test.d/00basic/trace_pipe.tc  |   15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/trace_pipe.tc

diff --git a/tools/testing/selftests/ftrace/test.d/00basic/trace_pipe.tc b/tools/testing/selftests/ftrace/test.d/00basic/trace_pipe.tc
new file mode 100644
index 000000000000..a7dd6fda487a
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/00basic/trace_pipe.tc
@@ -0,0 +1,15 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: trace_pipe and trace_marker
+
+[ ! -f trace_marker ] && exit_unsupported
+
+echo "test input 1" > trace_marker
+
+: "trace interface never consume the ring buffer"
+grep -q "test input 1" trace
+grep -q "test input 1" trace
+
+: "trace interface never consume the ring buffer"
+head -n 1 trace_pipe | grep -q "test input 1"
+! grep -q "test input 1" trace

Re: [PATCH 11/25] selftests/ftrace: Improve kprobe on module testcase to load/unload module

[Masami Hiramatsu]

On Fri, 27 Jul 2018 21:15:08 +0900
Masami Hiramatsu <mhiramat@kernel.org> wrote:

> --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
> +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
> @@ -4,11 +4,18 @@
>  
>  [ -f kprobe_events ] || exit_unsupported # this is configurable
>  
> +rmmod trace-printk ||:
> +if ! modprobe trace-printk.ko ; then
> +  echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=
> +m"
> +  exit_unresolved;
> +fi
> +
> +MOD=trace_printk
> +FUNC=trace_printk_irq_work

Hmm, this caused a problem with CONFIG_KPROBE_EVENTS_ON_NOTRACE=n.
However, as far as I can see, the trace_printk_irq_work() is not
marked as notrace...

Anyway, I'll find another better module to test.

Thanks,


-- 
Masami Hiramatsu <mhiramat@kernel.org>

Re: [PATCH 11/25] selftests/ftrace: Improve kprobe on module testcase to load/unload module

[Masami Hiramatsu]

On Thu, 2 Aug 2018 10:02:40 +0900
Masami Hiramatsu <mhiramat@kernel.org> wrote:

> On Fri, 27 Jul 2018 21:15:08 +0900
> Masami Hiramatsu <mhiramat@kernel.org> wrote:
> 
> > --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
> > +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_module.tc
> > @@ -4,11 +4,18 @@
> >  
> >  [ -f kprobe_events ] || exit_unsupported # this is configurable
> >  
> > +rmmod trace-printk ||:
> > +if ! modprobe trace-printk.ko ; then
> > +  echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=
> > +m"
> > +  exit_unresolved;
> > +fi
> > +
> > +MOD=trace_printk
> > +FUNC=trace_printk_irq_work
> 
> Hmm, this caused a problem with CONFIG_KPROBE_EVENTS_ON_NOTRACE=n.
> However, as far as I can see, the trace_printk_irq_work() is not
> marked as notrace...

Ah, I found this was caused by my prevent probe on notrace patch.
I was a bit too greedy to check out-of-range probes in it.
I'll fix that.

Thank you,

-- 
Masami Hiramatsu <mhiramat@kernel.org>

Re: [PATCH 23/25] selftests/ftrace: Add max stack tracer testcase

[Masami Hiramatsu]

On Fri, 27 Jul 2018 21:20:47 +0900
Masami Hiramatsu <mhiramat@kernel.org> wrote:

> Add a testcase for max stack tracer, which checks basic
> max stack usage tracing and its filter feature.
> 

Hmm, this test sometimes fails. (not always)
Let me check what happens.

Thank you,


> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
> ---
>  .../ftrace/test.d/ftrace/func_stack_tracer.tc      |   39 ++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
> 
> diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
> new file mode 100644
> index 000000000000..b414f0e3c646
> --- /dev/null
> +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_stack_tracer.tc
> @@ -0,0 +1,39 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +# description: ftrace - Max stack tracer
> +# Test the basic function of max-stack usage tracing
> +
> +if [ ! -f stack_trace ]; then
> +  echo "Max stack tracer is not supported - please make CONFIG_STACK_TRACER=y"
> +  exit_unsupported
> +fi
> +
> +echo > stack_trace_filter
> +echo 0 > stack_max_size
> +echo 1 > /proc/sys/kernel/stack_tracer_enabled
> +
> +: "Fork and wait for the first entry become !lock"
> +timeout=10
> +while [ $timeout -ne 0 ]; do
> +  ( echo "forked" )
> +  FL=`grep " 0)" stack_trace`
> +  echo $FL | grep -q "lock" || break;
> +  timeout=$((timeout - 1))
> +done
> +echo 0 > /proc/sys/kernel/stack_tracer_enabled
> +
> +echo '*lock*' > stack_trace_filter
> +test `cat stack_trace_filter | wc -l` -eq `grep lock stack_trace_filter | wc -l`
> +
> +echo 0 > stack_max_size
> +echo 1 > /proc/sys/kernel/stack_tracer_enabled
> +
> +: "Fork and always the first entry including lock"
> +timeout=10
> +while [ $timeout -ne 0 ]; do
> +  ( echo "forked" )
> +  FL=`grep " 0)" stack_trace`
> +  echo $FL | grep -q "lock"
> +  timeout=$((timeout - 1))
> +done
> +echo 0 > /proc/sys/kernel/stack_tracer_enabled
> 


-- 
Masami Hiramatsu <mhiramat@kernel.org>