LKML Archive on lore.kernel.org
 help / Atom feed
From: Stefan Popa <stefan.popa@analog.com>
To: <jic23@kernel.org>, <broonie@kernel.org>
Cc: Stefan Popa <stefan.popa@analog.com>, <lars@metafoo.de>,
	<Michael.Hennerich@analog.com>, <knaack.h@gmx.de>,
	<pmeerw@pmeerw.net>, <mark.rutland@arm.com>,
	<davem@davemloft.net>, <mchehab+samsung@kernel.org>,
	<gregkh@linuxfoundation.org>, <akpm@linux-foundation.org>,
	<robh+dt@kernel.org>, <linux-iio@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v6 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer
Date: Fri, 10 Aug 2018 11:46:18 +0300
Message-ID: <1533890783-13456-2-git-send-email-stefan.popa@analog.com> (raw)
In-Reply-To: <1533890783-13456-1-git-send-email-stefan.popa@analog.com>

This patch adds basic support for Analog Devices ADXL372 SPI-Bus
Three-Axis Digital Accelerometer.

The device is probed and configured the with some initial default
values. With this basic driver, it is possible to read raw acceleration
data.

Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL372.pdf

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
---
 MAINTAINERS                 |   6 +
 drivers/iio/accel/Kconfig   |  11 +
 drivers/iio/accel/Makefile  |   1 +
 drivers/iio/accel/adxl372.c | 525 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 543 insertions(+)
 create mode 100644 drivers/iio/accel/adxl372.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 60b1028..2ba47bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -543,6 +543,12 @@ W:	http://ez.analog.com/community/linux-device-drivers
 S:	Supported
 F:	drivers/input/misc/adxl34x.c
 
+ADXL372 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
+M:	Stefan Popa <stefan.popa@analog.com>
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/iio/accel/adxl372.c
+
 AF9013 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 62ae7e5..1b496ef 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -60,6 +60,17 @@ config ADXL345_SPI
 	  will be called adxl345_spi and you will also get adxl345_core
 	  for the core module.
 
+config ADXL372
+	tristate "Analog Devices ADXL372 3-Axis Accelerometer Driver"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to add support for the Analog Devices ADXL372 triaxial
+	  acceleration sensor.
+	  To compile this driver as a module, choose M here: the
+	  module will be called adxl372.
+
 config BMA180
 	tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
 	depends on I2C
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 636d4d1..5758ffc 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_ADIS16209) += adis16209.o
 obj-$(CONFIG_ADXL345) += adxl345_core.o
 obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
 obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
+obj-$(CONFIG_ADXL372) += adxl372.o
 obj-$(CONFIG_BMA180) += bma180.o
 obj-$(CONFIG_BMA220) += bma220_spi.o
 obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c
new file mode 100644
index 0000000..db9ecd2
--- /dev/null
+++ b/drivers/iio/accel/adxl372.c
@@ -0,0 +1,525 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADXL372 3-Axis Digital Accelerometer SPI driver
+ *
+ * Copyright 2018 Analog Devices Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* ADXL372 registers definition */
+#define ADXL372_DEVID			0x00
+#define ADXL372_DEVID_MST		0x01
+#define ADXL372_PARTID			0x02
+#define ADXL372_REVID			0x03
+#define ADXL372_STATUS_1		0x04
+#define ADXL372_STATUS_2		0x05
+#define ADXL372_FIFO_ENTRIES_2		0x06
+#define ADXL372_FIFO_ENTRIES_1		0x07
+#define ADXL372_X_DATA_H		0x08
+#define ADXL372_X_DATA_L		0x09
+#define ADXL372_Y_DATA_H		0x0A
+#define ADXL372_Y_DATA_L		0x0B
+#define ADXL372_Z_DATA_H		0x0C
+#define ADXL372_Z_DATA_L		0x0D
+#define ADXL372_X_MAXPEAK_H		0x15
+#define ADXL372_X_MAXPEAK_L		0x16
+#define ADXL372_Y_MAXPEAK_H		0x17
+#define ADXL372_Y_MAXPEAK_L		0x18
+#define ADXL372_Z_MAXPEAK_H		0x19
+#define ADXL372_Z_MAXPEAK_L		0x1A
+#define ADXL372_OFFSET_X		0x20
+#define ADXL372_OFFSET_Y		0x21
+#define ADXL372_OFFSET_Z		0x22
+#define ADXL372_X_THRESH_ACT_H		0x23
+#define ADXL372_X_THRESH_ACT_L		0x24
+#define ADXL372_Y_THRESH_ACT_H		0x25
+#define ADXL372_Y_THRESH_ACT_L		0x26
+#define ADXL372_Z_THRESH_ACT_H		0x27
+#define ADXL372_Z_THRESH_ACT_L		0x28
+#define ADXL372_TIME_ACT		0x29
+#define ADXL372_X_THRESH_INACT_H	0x2A
+#define ADXL372_X_THRESH_INACT_L	0x2B
+#define ADXL372_Y_THRESH_INACT_H	0x2C
+#define ADXL372_Y_THRESH_INACT_L	0x2D
+#define ADXL372_Z_THRESH_INACT_H	0x2E
+#define ADXL372_Z_THRESH_INACT_L	0x2F
+#define ADXL372_TIME_INACT_H		0x30
+#define ADXL372_TIME_INACT_L		0x31
+#define ADXL372_X_THRESH_ACT2_H		0x32
+#define ADXL372_X_THRESH_ACT2_L		0x33
+#define ADXL372_Y_THRESH_ACT2_H		0x34
+#define ADXL372_Y_THRESH_ACT2_L		0x35
+#define ADXL372_Z_THRESH_ACT2_H		0x36
+#define ADXL372_Z_THRESH_ACT2_L		0x37
+#define ADXL372_HPF			0x38
+#define ADXL372_FIFO_SAMPLES		0x39
+#define ADXL372_FIFO_CTL		0x3A
+#define ADXL372_INT1_MAP		0x3B
+#define ADXL372_INT2_MAP		0x3C
+#define ADXL372_TIMING			0x3D
+#define ADXL372_MEASURE			0x3E
+#define ADXL372_POWER_CTL		0x3F
+#define ADXL372_SELF_TEST		0x40
+#define ADXL372_RESET			0x41
+#define ADXL372_FIFO_DATA		0x42
+
+#define ADXL372_DEVID_VAL		0xAD
+#define ADXL372_PARTID_VAL		0xFA
+#define ADXL372_RESET_CODE		0x52
+
+/* ADXL372_POWER_CTL */
+#define ADXL372_POWER_CTL_MODE_MSK		GENMASK_ULL(1, 0)
+#define ADXL372_POWER_CTL_MODE(x)		(((x) & 0x3) << 0)
+
+/* ADXL372_MEASURE */
+#define ADXL372_MEASURE_LINKLOOP_MSK		GENMASK_ULL(5, 4)
+#define ADXL372_MEASURE_LINKLOOP_MODE(x)	(((x) & 0x3) << 4)
+#define ADXL372_MEASURE_BANDWIDTH_MSK		GENMASK_ULL(2, 0)
+#define ADXL372_MEASURE_BANDWIDTH_MODE(x)	(((x) & 0x7) << 0)
+
+/* ADXL372_TIMING */
+#define ADXL372_TIMING_ODR_MSK			GENMASK_ULL(7, 5)
+#define ADXL372_TIMING_ODR_MODE(x)		(((x) & 0x7) << 5)
+
+/* ADXL372_FIFO_CTL */
+#define ADXL372_FIFO_CTL_FORMAT_MSK		GENMASK(5, 3)
+#define ADXL372_FIFO_CTL_FORMAT_MODE(x)		(((x) & 0x7) << 3)
+#define ADXL372_FIFO_CTL_MODE_MSK		GENMASK(2, 1)
+#define ADXL372_FIFO_CTL_MODE_MODE(x)		(((x) & 0x3) << 1)
+#define ADXL372_FIFO_CTL_SAMPLES_MSK		BIT(1)
+#define ADXL372_FIFO_CTL_SAMPLES_MODE(x)	(((x) > 0xFF) ? 1 : 0)
+
+/* ADXL372_STATUS_1 */
+#define ADXL372_STATUS_1_DATA_RDY(x)		(((x) >> 0) & 0x1)
+#define ADXL372_STATUS_1_FIFO_RDY(x)		(((x) >> 1) & 0x1)
+#define ADXL372_STATUS_1_FIFO_FULL(x)		(((x) >> 2) & 0x1)
+#define ADXL372_STATUS_1_FIFO_OVR(x)		(((x) >> 3) & 0x1)
+#define ADXL372_STATUS_1_USR_NVM_BUSY(x)	(((x) >> 5) & 0x1)
+#define ADXL372_STATUS_1_AWAKE(x)		(((x) >> 6) & 0x1)
+#define ADXL372_STATUS_1_ERR_USR_REGS(x)	(((x) >> 7) & 0x1)
+
+/* ADXL372_INT1_MAP */
+#define ADXL372_INT1_MAP_DATA_RDY_MSK		BIT(0)
+#define ADXL372_INT1_MAP_DATA_RDY_MODE(x)	(((x) & 0x1) << 0)
+#define ADXL372_INT1_MAP_FIFO_RDY_MSK		BIT(1)
+#define ADXL372_INT1_MAP_FIFO_RDY_MODE(x)	(((x) & 0x1) << 1)
+#define ADXL372_INT1_MAP_FIFO_FULL_MSK		BIT(2)
+#define ADXL372_INT1_MAP_FIFO_FULL_MODE(x)	(((x) & 0x1) << 2)
+#define ADXL372_INT1_MAP_FIFO_OVR_MSK		BIT(3)
+#define ADXL372_INT1_MAP_FIFO_OVR_MODE(x)	(((x) & 0x1) << 3)
+#define ADXL372_INT1_MAP_INACT_MSK		BIT(4)
+#define ADXL372_INT1_MAP_INACT_MODE(x)		(((x) & 0x1) << 4)
+#define ADXL372_INT1_MAP_ACT_MSK		BIT(5)
+#define ADXL372_INT1_MAP_ACT_MODE(x)		(((x) & 0x1) << 5)
+#define ADXL372_INT1_MAP_AWAKE_MSK		BIT(6)
+#define ADXL372_INT1_MAP_AWAKE_MODE(x)		(((x) & 0x1) << 6)
+#define ADXL372_INT1_MAP_LOW_MSK		BIT(7)
+#define ADXL372_INT1_MAP_LOW_MODE(x)		(((x) & 0x1) << 7)
+
+/*
+ * At +/- 200g with 12-bit resolution, scale is computed as:
+ * (200 + 200) * 9.81 / (2^12 - 1) = 0.958241
+ */
+#define ADXL372_USCALE	958241
+
+enum adxl372_op_mode {
+	ADXL372_STANDBY,
+	ADXL372_WAKE_UP,
+	ADXL372_INSTANT_ON,
+	ADXL372_FULL_BW_MEASUREMENT,
+};
+
+enum adxl372_act_proc_mode {
+	ADXL372_DEFAULT,
+	ADXL372_LINKED,
+	ADXL372_LOOPED,
+};
+
+enum adxl372_th_activity {
+	ADXL372_ACTIVITY,
+	ADXL372_ACTIVITY2,
+	ADXL372_INACTIVITY,
+};
+
+enum adxl372_odr {
+	ADXL372_ODR_400HZ,
+	ADXL372_ODR_800HZ,
+	ADXL372_ODR_1600HZ,
+	ADXL372_ODR_3200HZ,
+	ADXL372_ODR_6400HZ,
+};
+
+enum adxl372_bandwidth {
+	ADXL372_BW_200HZ,
+	ADXL372_BW_400HZ,
+	ADXL372_BW_800HZ,
+	ADXL372_BW_1600HZ,
+	ADXL372_BW_3200HZ,
+};
+
+static const unsigned int adxl372_th_reg_high_addr[3] = {
+	[ADXL372_ACTIVITY] = ADXL372_X_THRESH_ACT_H,
+	[ADXL372_ACTIVITY2] = ADXL372_X_THRESH_ACT2_H,
+	[ADXL372_INACTIVITY] = ADXL372_X_THRESH_INACT_H,
+};
+
+#define ADXL372_ACCEL_CHANNEL(index, reg, axis) {			\
+	.type = IIO_ACCEL,						\
+	.address = reg,							\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+}
+
+static const struct iio_chan_spec adxl372_channels[] = {
+	ADXL372_ACCEL_CHANNEL(0, ADXL372_X_DATA_H, X),
+	ADXL372_ACCEL_CHANNEL(1, ADXL372_Y_DATA_H, Y),
+	ADXL372_ACCEL_CHANNEL(2, ADXL372_Z_DATA_H, Z),
+};
+
+struct adxl372_state {
+	struct spi_device		*spi;
+	struct regmap			*regmap;
+	enum adxl372_op_mode		op_mode;
+	enum adxl372_act_proc_mode	act_proc_mode;
+	enum adxl372_odr		odr;
+	enum adxl372_bandwidth		bw;
+	u32				act_time_ms;
+	u32				inact_time_ms;
+};
+
+static int adxl372_read_axis(struct adxl372_state *st, u8 addr)
+{
+	__be16 regval;
+	int ret;
+
+	ret = regmap_bulk_read(st->regmap, addr, &regval, sizeof(regval));
+	if (ret < 0)
+		return ret;
+
+	return be16_to_cpu(regval);
+}
+
+static int adxl372_set_op_mode(struct adxl372_state *st,
+			       enum adxl372_op_mode op_mode)
+{
+	int ret;
+
+	ret = regmap_update_bits(st->regmap, ADXL372_POWER_CTL,
+				 ADXL372_POWER_CTL_MODE_MSK,
+				 ADXL372_POWER_CTL_MODE(op_mode));
+	if (ret < 0)
+		return ret;
+
+	st->op_mode = op_mode;
+
+	return ret;
+}
+
+static int adxl372_set_odr(struct adxl372_state *st,
+			   enum adxl372_odr odr)
+{
+	int ret;
+
+	ret = regmap_update_bits(st->regmap, ADXL372_TIMING,
+				 ADXL372_TIMING_ODR_MSK,
+				 ADXL372_TIMING_ODR_MODE(odr));
+	if (ret < 0)
+		return ret;
+
+	st->odr = odr;
+
+	return ret;
+}
+
+static int adxl372_set_bandwidth(struct adxl372_state *st,
+				 enum adxl372_bandwidth bw)
+{
+	int ret;
+
+	ret = regmap_update_bits(st->regmap, ADXL372_MEASURE,
+				 ADXL372_MEASURE_BANDWIDTH_MSK,
+				 ADXL372_MEASURE_BANDWIDTH_MODE(bw));
+	if (ret < 0)
+		return ret;
+
+	st->bw = bw;
+
+	return ret;
+}
+
+static int adxl372_set_act_proc_mode(struct adxl372_state *st,
+				     enum adxl372_act_proc_mode mode)
+{
+	int ret;
+
+	ret = regmap_update_bits(st->regmap,
+				 ADXL372_MEASURE,
+				 ADXL372_MEASURE_LINKLOOP_MSK,
+				 ADXL372_MEASURE_LINKLOOP_MODE(mode));
+	if (ret < 0)
+		return ret;
+
+	st->act_proc_mode = mode;
+
+	return ret;
+}
+
+static int adxl372_set_activity_threshold(struct adxl372_state *st,
+					  enum adxl372_th_activity act,
+					  bool ref_en, bool enable,
+					  unsigned int threshold)
+{
+	unsigned char buf[6];
+	unsigned char th_reg_high_val, th_reg_low_val, th_reg_high_addr;
+
+	/* scale factor is 100 mg/code */
+	th_reg_high_val = (threshold / 100) >> 3;
+	th_reg_low_val = ((threshold / 100) << 5) | (ref_en << 1) | enable;
+	th_reg_high_addr = adxl372_th_reg_high_addr[act];
+
+	buf[0] = th_reg_high_val;
+	buf[1] = th_reg_low_val;
+	buf[2] = th_reg_high_val;
+	buf[3] = th_reg_low_val;
+	buf[4] = th_reg_high_val;
+	buf[5] = th_reg_low_val;
+
+	return regmap_bulk_write(st->regmap, th_reg_high_addr,
+				 buf, ARRAY_SIZE(buf));
+}
+
+static int adxl372_set_activity_time_ms(struct adxl372_state *st,
+					unsigned int act_time_ms)
+{
+	unsigned int reg_val, scale_factor;
+	int ret;
+
+	/*
+	 * 3.3 ms per code is the scale factor of the TIME_ACT register for
+	 * ODR = 6400 Hz. It is 6.6 ms per code for ODR = 3200 Hz and below.
+	 */
+	if (st->odr == ADXL372_ODR_6400HZ)
+		scale_factor = 3300;
+	else
+		scale_factor = 6600;
+
+	reg_val = DIV_ROUND_CLOSEST(act_time_ms * 1000, scale_factor);
+
+	/* TIME_ACT register is 8 bits wide */
+	if (reg_val > 0xFF)
+		reg_val = 0xFF;
+
+	ret = regmap_write(st->regmap, ADXL372_TIME_ACT, reg_val);
+	if (ret < 0)
+		return ret;
+
+	st->act_time_ms = act_time_ms;
+
+	return ret;
+}
+
+static int adxl372_set_inactivity_time_ms(struct adxl372_state *st,
+					  unsigned int inact_time_ms)
+{
+	unsigned int reg_val_h, reg_val_l, res, scale_factor;
+	int ret;
+
+	/*
+	 * 13 ms per code is the scale factor of the TIME_INACT register for
+	 * ODR = 6400 Hz. It is 26 ms per code for ODR = 3200 Hz and below.
+	 */
+	if (st->odr == ADXL372_ODR_6400HZ)
+		scale_factor = 13;
+	else
+		scale_factor = 26;
+
+	res = DIV_ROUND_CLOSEST(inact_time_ms, scale_factor);
+	reg_val_h = (res >> 8) & 0xFF;
+	reg_val_l = res & 0xFF;
+
+	ret = regmap_write(st->regmap, ADXL372_TIME_INACT_H, reg_val_h);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(st->regmap, ADXL372_TIME_INACT_L, reg_val_l);
+	if (ret < 0)
+		return ret;
+
+	st->inact_time_ms = inact_time_ms;
+
+	return ret;
+}
+
+static int adxl372_setup(struct adxl372_state *st)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADXL372_DEVID, &regval);
+	if (ret < 0)
+		return ret;
+
+	if (regval != ADXL372_DEVID_VAL) {
+		dev_err(&st->spi->dev, "Invalid chip id %x\n", regval);
+		return -ENODEV;
+	}
+
+	ret = adxl372_set_op_mode(st, ADXL372_STANDBY);
+	if (ret < 0)
+		return ret;
+
+	/* Set threshold for activity detection to 1g */
+	ret = adxl372_set_activity_threshold(st, ADXL372_ACTIVITY,
+					     true, true, 1000);
+	if (ret < 0)
+		return ret;
+
+	/* Set threshold for inactivity detection to 100mg */
+	ret = adxl372_set_activity_threshold(st, ADXL372_INACTIVITY,
+					     true, true, 100);
+	if (ret < 0)
+		return ret;
+
+	/* Set activity processing in Looped mode */
+	ret = adxl372_set_act_proc_mode(st, ADXL372_LOOPED);
+	if (ret < 0)
+		return ret;
+
+	ret = adxl372_set_odr(st, ADXL372_ODR_6400HZ);
+	if (ret < 0)
+		return ret;
+
+	ret = adxl372_set_bandwidth(st, ADXL372_BW_3200HZ);
+	if (ret < 0)
+		return ret;
+
+	/* Set activity timer to 1ms */
+	ret = adxl372_set_activity_time_ms(st, 1);
+	if (ret < 0)
+		return ret;
+
+	/* Set inactivity timer to 10s */
+	ret = adxl372_set_inactivity_time_ms(st, 10000);
+	if (ret < 0)
+		return ret;
+
+	/* Set the mode of operation to full bandwidth measurement mode */
+	return adxl372_set_op_mode(st, ADXL372_FULL_BW_MEASUREMENT);
+}
+
+static int adxl372_reg_access(struct iio_dev *indio_dev,
+			      unsigned int reg,
+			      unsigned int writeval,
+			      unsigned int *readval)
+{
+	struct adxl372_state *st = iio_priv(indio_dev);
+
+	if (readval)
+		return regmap_read(st->regmap, reg, readval);
+	else
+		return regmap_write(st->regmap, reg, writeval);
+}
+
+static int adxl372_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long info)
+{
+	struct adxl372_state *st = iio_priv(indio_dev);
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ret = adxl372_read_axis(st, chan->address);
+		if (ret < 0)
+			return ret;
+
+		*val = sign_extend32(ret >> chan->scan_type.shift,
+				     chan->scan_type.realbits - 1);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = ADXL372_USCALE;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info adxl372_info = {
+	.read_raw = adxl372_read_raw,
+	.debugfs_reg_access = &adxl372_reg_access,
+};
+
+static const struct regmap_config adxl372_spi_regmap_config = {
+	.reg_bits = 7,
+	.pad_bits = 1,
+	.val_bits = 8,
+	.read_flag_mask = BIT(0),
+};
+
+static int adxl372_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct adxl372_state *st;
+	struct regmap *regmap;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	spi_set_drvdata(spi, indio_dev);
+
+	st->spi = spi;
+
+	regmap = devm_regmap_init_spi(spi, &adxl372_spi_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	st->regmap = regmap;
+
+	indio_dev->channels = adxl372_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adxl372_channels);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->info = &adxl372_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = adxl372_setup(st);
+	if (ret < 0) {
+		dev_err(&st->spi->dev, "ADXL372 setup failed\n");
+		return ret;
+	}
+
+	return devm_iio_device_register(&st->spi->dev, indio_dev);
+}
+
+static const struct spi_device_id adxl372_id[] = {
+	{ "adxl372", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adxl372_id);
+
+static struct spi_driver adxl372_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+	},
+	.probe = adxl372_probe,
+	.id_table = adxl372_id,
+};
+
+module_spi_driver(adxl372_driver);
+
+MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


  reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-10  8:46 [PATCH v6 0/6] iio: accel: Add adxl372 driver Stefan Popa
2018-08-10  8:46 ` Stefan Popa [this message]
2018-08-10 18:21   ` [PATCH v6 1/6] iio: adxl372: New driver for Analog Devices ADXL372 Accelerometer Marcus Folkesson
2018-08-19 17:00   ` Jonathan Cameron
2018-08-10  8:46 ` [PATCH v6 2/6] dt-bindings: iio: accel: Add docs for ADXL372 Stefan Popa
2018-08-19 17:03   ` Jonathan Cameron
2018-08-10  8:46 ` [PATCH v6 3/6] regmap: Add regmap_noinc_read API Stefan Popa
2018-08-10 10:38   ` Mark Brown
2018-08-19 17:09     ` Jonathan Cameron
2018-08-10  8:46 ` [PATCH v6 4/6] iio:adxl372: Add FIFO and interrupts support Stefan Popa
2018-08-19 17:12   ` Jonathan Cameron
2018-08-19 17:27     ` Jonathan Cameron
2018-08-19 17:25   ` Jonathan Cameron
2018-08-10  8:46 ` [PATCH v6 5/6] iio:adxl372: Add sampling frequency support Stefan Popa
2018-08-10  8:46 ` [PATCH v6 6/6] iio:adxl372: Add filter bandwidth support Stefan Popa

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1533890783-13456-2-git-send-email-stefan.popa@analog.com \
    --to=stefan.popa@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=akpm@linux-foundation.org \
    --cc=broonie@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox