linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tony Xie <tony.xie@rock-chips.com>
To: heiko@sntech.de
Cc: broonie@kernel.org, lee.jones@linaro.org, robh+dt@kernel.org,
	mark.rutland@arm.com, a.zummo@towertech.it,
	alexandre.belloni@bootlin.com, sboyd@kernel.org,
	linux-clk@vger.kernel.org, linux-rtc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, chenjh@rock-chips.com,
	xsf@rock-chips.com, zhangqing@rock-chips.com,
	huangtao@rock-chips.com, tony.xie@rock-chips.com
Subject: [PATCH v3 5/5] clk: RK808: add RK809 and RK817 support.
Date: Fri, 24 Aug 2018 11:36:02 +0800	[thread overview]
Message-ID: <1535081762-20844-1-git-send-email-tony.xie@rock-chips.com> (raw)
In-Reply-To: <1535081441-20718-1-git-send-email-tony.xie@rock-chips.com>

RK809 and RK817 are power management IC chips for multimedia products.
most of their functions and registers are same, including the clkout
funciton.

Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
---
 drivers/clk/Kconfig     |  9 ++++---
 drivers/clk/clk-rk808.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 65 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 721572a..92cf5ad 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -46,13 +46,12 @@ config COMMON_CLK_MAX77686
 	  clock.
 
 config COMMON_CLK_RK808
-	tristate "Clock driver for RK805/RK808/RK818"
+	tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
 	depends on MFD_RK808
 	---help---
-	  This driver supports RK805, RK808 and RK818 crystal oscillator clock. These
-	  multi-function devices have two fixed-rate oscillators,
-	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
-	  by control register.
+	  This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
+	  These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
+	  Clkout1 is always on, Clkout2 can off by control register.
 
 config COMMON_CLK_HI655X
 	tristate "Clock driver for Hi655x" if EXPERT
diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
index 6461f28..c5d3492 100644
--- a/drivers/clk/clk-rk808.c
+++ b/drivers/clk/clk-rk808.c
@@ -96,6 +96,66 @@ static int rk808_clkout2_is_prepared(struct clk_hw *hw)
 	return idx ? &rk808_clkout->clkout2_hw : &rk808_clkout->clkout1_hw;
 }
 
+static int rk817_clkout2_enable(struct clk_hw *hw, bool enable)
+{
+	struct rk808_clkout *rk808_clkout = container_of(hw,
+							 struct rk808_clkout,
+							 clkout2_hw);
+	struct rk808 *rk808 = rk808_clkout->rk808;
+
+	return regmap_update_bits(rk808->regmap, RK817_SYS_CFG(1),
+				  RK817_CLK32KOUT2_EN,
+				  enable ? RK817_CLK32KOUT2_EN : 0);
+}
+
+static int rk817_clkout2_prepare(struct clk_hw *hw)
+{
+	return rk817_clkout2_enable(hw, true);
+}
+
+static void rk817_clkout2_unprepare(struct clk_hw *hw)
+{
+	rk817_clkout2_enable(hw, false);
+}
+
+static int rk817_clkout2_is_prepared(struct clk_hw *hw)
+{
+	struct rk808_clkout *rk808_clkout = container_of(hw,
+							 struct rk808_clkout,
+							 clkout2_hw);
+	struct rk808 *rk808 = rk808_clkout->rk808;
+	unsigned int val;
+
+	int ret = regmap_read(rk808->regmap, RK817_SYS_CFG(1), &val);
+
+	if (ret < 0)
+		return ret;
+
+	return (val & RK817_CLK32KOUT2_EN) ? 1 : 0;
+}
+
+static const struct clk_ops rk817_clkout2_ops = {
+	.prepare = rk817_clkout2_prepare,
+	.unprepare = rk817_clkout2_unprepare,
+	.is_prepared = rk817_clkout2_is_prepared,
+	.recalc_rate = rk808_clkout_recalc_rate,
+};
+
+static const struct clk_ops *rkpmic_get_ops(long variant)
+{
+	switch (variant) {
+	case RK809_ID:
+	case RK817_ID:
+		return &rk817_clkout2_ops;
+	case RK805_ID:
+	case RK808_ID:
+	case RK818_ID:
+		return &rk808_clkout2_ops;
+	}
+
+	return &rk808_clkout2_ops;
+}
+
 static int rk808_clkout_probe(struct platform_device *pdev)
 {
 	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
@@ -127,7 +187,7 @@ static int rk808_clkout_probe(struct platform_device *pdev)
 		return ret;
 
 	init.name = "rk808-clkout2";
-	init.ops = &rk808_clkout2_ops;
+	init.ops = rkpmic_get_ops(rk808->variant);
 	rk808_clkout->clkout2_hw.init = &init;
 
 	/* optional override of the clockname */
-- 
1.9.1



  parent reply	other threads:[~2018-08-24  3:34 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-24  3:30 [PATCH v3 0/5] support a new type of PMIC,including two chips(rk817 and rk809) Tony Xie
2018-08-24  3:30 ` [PATCH v3 1/5] mfd: rk808: Add RK817 and RK809 support Tony Xie
2018-09-11 11:47   ` Lee Jones
2018-10-23  3:12     ` tony
2018-10-23  6:26       ` Lee Jones
2018-10-23  7:21         ` tony
2018-08-24  3:30 ` [PATCH v3 2/5] regulator: rk808: add RK809 and RK817 support Tony Xie
2018-08-24 12:23   ` Wadim Egorov
2018-08-24  3:30 ` [PATCH v3 3/5] dt-bindings: mfd: rk808: Add binding information for RK809 and RK817 Tony Xie
2018-08-28 22:40   ` Rob Herring
2018-09-11 12:37   ` Lee Jones
2018-08-24  3:30 ` [PATCH v3 4/5] rtc: rk808: add RK809 and RK817 support Tony Xie
2018-08-27 21:14   ` Alexandre Belloni
2018-08-24  3:35 ` Tony Xie
2018-08-24  3:36 ` Tony Xie [this message]
2018-08-31 17:34   ` [PATCH v3 5/5] clk: RK808: " Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1535081762-20844-1-git-send-email-tony.xie@rock-chips.com \
    --to=tony.xie@rock-chips.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=chenjh@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=xsf@rock-chips.com \
    --cc=zhangqing@rock-chips.com \
    --subject='Re: [PATCH v3 5/5] clk: RK808: add RK809 and RK817 support.' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).