linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Javier González" <javier@javigon.com>
To: mb@lightnvm.io
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Javier González" <javier@cnexlabs.com>
Subject: [PATCH 2/2] lightnvm: pblk: retrieve chunk metadata on erase
Date: Tue, 11 Sep 2018 13:35:34 +0200	[thread overview]
Message-ID: <1536665734-14305-3-git-send-email-javier@cnexlabs.com> (raw)
In-Reply-To: <1536665734-14305-1-git-send-email-javier@cnexlabs.com>

On the OCSSD 2.0 spec, the device populates the metadata pointer (if
provided) when a chunk is reset. Implement this path in pblk and use it
for sanity chunk checks.

For 1.2, reset the write pointer and the state on core so that the erase
path is transparent to pblk wrt OCSSD version.

Signed-off-by: Javier González <javier@cnexlabs.com>
---
 drivers/lightnvm/core.c      | 44 ++++++++++++++++++++++++++++++++++++--
 drivers/lightnvm/pblk-core.c | 51 +++++++++++++++++++++++++++++++++-----------
 2 files changed, 80 insertions(+), 15 deletions(-)

diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
index efb976a863d2..dceaae4e795f 100644
--- a/drivers/lightnvm/core.c
+++ b/drivers/lightnvm/core.c
@@ -750,9 +750,40 @@ int nvm_submit_io(struct nvm_tgt_dev *tgt_dev, struct nvm_rq *rqd)
 }
 EXPORT_SYMBOL(nvm_submit_io);
 
+/* Take only addresses in generic format */
+static void nvm_set_chunk_state_12(struct nvm_dev *dev, struct nvm_rq *rqd)
+{
+	struct ppa_addr *ppa_list = nvm_rq_to_ppa_list(rqd);
+	int i;
+
+	for (i = 0; i < rqd->nr_ppas; i++) {
+		struct ppa_addr ppa;
+		struct nvm_chk_meta *chunk;
+
+		chunk = ((struct nvm_chk_meta *)rqd->meta_list) + i;
+
+		if (rqd->error)
+			chunk->state = NVM_CHK_ST_OFFLINE;
+		else
+			chunk->state = NVM_CHK_ST_FREE;
+
+		chunk->wp = 0;
+		chunk->wi = 0;
+		chunk->type = NVM_CHK_TP_W_SEQ;
+		chunk->cnlb = dev->geo.clba;
+
+		/* recalculate slba for the chunk */
+		ppa = ppa_list[i];
+		ppa.g.pg = ppa.g.pl = ppa.g.sec = 0;
+
+		chunk->slba = generic_to_dev_addr(dev, ppa).ppa;
+	}
+}
+
 int nvm_submit_io_sync(struct nvm_tgt_dev *tgt_dev, struct nvm_rq *rqd)
 {
 	struct nvm_dev *dev = tgt_dev->parent;
+	struct nvm_geo *geo = &dev->geo;
 	int ret;
 
 	if (!dev->ops->submit_io_sync)
@@ -765,8 +796,12 @@ int nvm_submit_io_sync(struct nvm_tgt_dev *tgt_dev, struct nvm_rq *rqd)
 
 	/* In case of error, fail with right address format */
 	ret = dev->ops->submit_io_sync(dev, rqd);
+
 	nvm_rq_dev_to_tgt(tgt_dev, rqd);
 
+	if (geo->version == NVM_OCSSD_SPEC_12 && rqd->opcode == NVM_OP_ERASE)
+		nvm_set_chunk_state_12(dev, rqd);
+
 	return ret;
 }
 EXPORT_SYMBOL(nvm_submit_io_sync);
@@ -775,10 +810,15 @@ void nvm_end_io(struct nvm_rq *rqd)
 {
 	struct nvm_tgt_dev *tgt_dev = rqd->dev;
 
-	/* Convert address space */
-	if (tgt_dev)
+	if (tgt_dev) {
+		/* Convert address space */
 		nvm_rq_dev_to_tgt(tgt_dev, rqd);
 
+		if (tgt_dev->geo.version == NVM_OCSSD_SPEC_12 &&
+						rqd->opcode == NVM_OP_ERASE)
+			nvm_set_chunk_state_12(tgt_dev->parent, rqd);
+	}
+
 	if (rqd->end_io)
 		rqd->end_io(rqd);
 }
diff --git a/drivers/lightnvm/pblk-core.c b/drivers/lightnvm/pblk-core.c
index 417d12b274da..80f0ec756672 100644
--- a/drivers/lightnvm/pblk-core.c
+++ b/drivers/lightnvm/pblk-core.c
@@ -79,7 +79,7 @@ static void __pblk_end_io_erase(struct pblk *pblk, struct nvm_rq *rqd)
 {
 	struct nvm_tgt_dev *dev = pblk->dev;
 	struct nvm_geo *geo = &dev->geo;
-	struct nvm_chk_meta *chunk;
+	struct nvm_chk_meta *chunk, *dev_chunk;
 	struct pblk_line *line;
 	int pos;
 
@@ -89,22 +89,39 @@ static void __pblk_end_io_erase(struct pblk *pblk, struct nvm_rq *rqd)
 
 	atomic_dec(&line->left_seblks);
 
+	/* pblk submits a single erase per command */
+	dev_chunk = rqd->meta_list;
+
+	if (dev_chunk->slba != chunk->slba || dev_chunk->wp)
+		print_chunk(pblk, chunk, "corrupted erase chunk", 0);
+
+	memcpy(chunk, dev_chunk, sizeof(struct nvm_chk_meta));
+
 	if (rqd->error) {
 		trace_pblk_chunk_reset(pblk_disk_name(pblk),
 				&rqd->ppa_addr, PBLK_CHUNK_RESET_FAILED);
 
-		chunk->state = NVM_CHK_ST_OFFLINE;
+#ifdef CONFIG_NVM_PBLK_DEBUG
+		if (chunk->state != NVM_CHK_ST_OFFLINE)
+			print_chunk(pblk, chunk,
+					"corrupted erase chunk state", 0);
+#endif
 		pblk_mark_bb(pblk, line, rqd->ppa_addr);
 	} else {
 		trace_pblk_chunk_reset(pblk_disk_name(pblk),
 				&rqd->ppa_addr, PBLK_CHUNK_RESET_DONE);
 
-		chunk->state = NVM_CHK_ST_FREE;
+#ifdef CONFIG_NVM_PBLK_DEBUG
+		if (chunk->state != NVM_CHK_ST_FREE)
+			print_chunk(pblk, chunk,
+					"corrupted erase chunk state", 0);
+#endif
 	}
 
 	trace_pblk_chunk_state(pblk_disk_name(pblk), &rqd->ppa_addr,
 				chunk->state);
 
+	pblk_free_rqd_meta(pblk, rqd);
 	atomic_dec(&pblk->inflight_io);
 }
 
@@ -952,14 +969,16 @@ int pblk_line_emeta_read(struct pblk *pblk, struct pblk_line *line,
 	return ret;
 }
 
-static void pblk_setup_e_rq(struct pblk *pblk, struct nvm_rq *rqd,
-			    struct ppa_addr ppa)
+static int pblk_setup_e_rq(struct pblk *pblk, struct nvm_rq *rqd,
+			   struct ppa_addr ppa)
 {
 	rqd->opcode = NVM_OP_ERASE;
 	rqd->ppa_addr = ppa;
 	rqd->nr_ppas = 1;
 	rqd->is_seq = 1;
 	rqd->bio = NULL;
+
+	return pblk_alloc_rqd_meta(pblk, rqd);
 }
 
 static int pblk_blk_erase_sync(struct pblk *pblk, struct ppa_addr ppa)
@@ -967,10 +986,12 @@ static int pblk_blk_erase_sync(struct pblk *pblk, struct ppa_addr ppa)
 	struct nvm_rq rqd = {NULL};
 	int ret;
 
+	ret = pblk_setup_e_rq(pblk, &rqd, ppa);
+	if (ret)
+		return ret;
+
 	trace_pblk_chunk_reset(pblk_disk_name(pblk), &ppa,
-				PBLK_CHUNK_RESET_START);
-
-	pblk_setup_e_rq(pblk, &rqd, ppa);
+						PBLK_CHUNK_RESET_START);
 
 	/* The write thread schedules erases so that it minimizes disturbances
 	 * with writes. Thus, there is no need to take the LUN semaphore.
@@ -1774,11 +1795,15 @@ void pblk_line_put_wq(struct kref *ref)
 int pblk_blk_erase_async(struct pblk *pblk, struct ppa_addr ppa)
 {
 	struct nvm_rq *rqd;
-	int err;
+	int ret;
 
 	rqd = pblk_alloc_rqd(pblk, PBLK_ERASE);
 
-	pblk_setup_e_rq(pblk, rqd, ppa);
+	ret = pblk_setup_e_rq(pblk, rqd, ppa);
+	if (ret) {
+		pblk_free_rqd(pblk, rqd, PBLK_ERASE);
+		return ret;
+	}
 
 	rqd->end_io = pblk_end_io_erase;
 	rqd->private = pblk;
@@ -1789,8 +1814,8 @@ int pblk_blk_erase_async(struct pblk *pblk, struct ppa_addr ppa)
 	/* The write thread schedules erases so that it minimizes disturbances
 	 * with writes. Thus, there is no need to take the LUN semaphore.
 	 */
-	err = pblk_submit_io(pblk, rqd);
-	if (err) {
+	ret = pblk_submit_io(pblk, rqd);
+	if (ret) {
 		struct nvm_tgt_dev *dev = pblk->dev;
 		struct nvm_geo *geo = &dev->geo;
 
@@ -1799,7 +1824,7 @@ int pblk_blk_erase_async(struct pblk *pblk, struct ppa_addr ppa)
 					pblk_ppa_to_pos(geo, ppa));
 	}
 
-	return err;
+	return ret;
 }
 
 struct pblk_line *pblk_line_get_data(struct pblk *pblk)
-- 
2.7.4


  parent reply	other threads:[~2018-09-11 11:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-11 11:35 [V2 PATCH 0/2] pblk: retrieve chunk metadata on erase Javier González
2018-09-11 11:35 ` [PATCH 1/2] lightnvm: pblk: add helper for printing chunk state Javier González
2018-09-11 11:35 ` Javier González [this message]
2018-09-17  8:26   ` [PATCH 2/2] lightnvm: pblk: retrieve chunk metadata on erase Matias Bjørling
2018-09-17 10:17     ` Javier Gonzalez
2018-10-04  7:13 [V2 PATCH 0/2] " Javier González
2018-10-04  7:13 ` [PATCH 2/2] " Javier González

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1536665734-14305-3-git-send-email-javier@cnexlabs.com \
    --to=javier@javigon.com \
    --cc=javier@cnexlabs.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mb@lightnvm.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).