* [PATCH v3] PCI: Equalize hotplug memory and io for non/occupied slots
@ 2018-09-25 18:39 Jon Derrick
2018-09-26 22:23 ` Bjorn Helgaas
0 siblings, 1 reply; 2+ messages in thread
From: Jon Derrick @ 2018-09-25 18:39 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: linux-pci, linux-kernel, Lorenzo Pieralisi, Sinan Kaya,
Christoph Hellwig, Keith Busch, Matthew Wilcox, Logan Gunthorpe,
Mika Westerberg, Jon Derrick
Currently, a hotplug bridge will be given hpmemsize additional memory
and hpiosize additional io if available, in order to satisfy any future
hotplug allocation requirements.
These calculations don't consider the current memory/io size of the
hotplug bridge/slot, so hotplug bridges/slots which have downstream
devices will be allocated their current allocation in addition to the
hpmemsize value.
This makes for possibly undesirable results with a mix of unoccupied and
occupied slots (ex, with hpmemsize=2M):
02:03.0 PCI bridge: <-- Occupied
Memory behind bridge: d6200000-d64fffff [size=3M]
02:04.0 PCI bridge: <-- Unoccupied
Memory behind bridge: d6500000-d66fffff [size=2M]
This change considers the current allocation size when using the
hpmemsize/hpiosize parameters to make the reservations predictable for
the mix of unoccupied and occupied slots:
02:03.0 PCI bridge: <-- Occupied
Memory behind bridge: d6200000-d63fffff [size=2M]
02:04.0 PCI bridge: <-- Unoccupied
Memory behind bridge: d6400000-d65fffff [size=2M]
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
---
v2->v3: Made the IO and mem size calculations nearly equivalent
drivers/pci/setup-bus.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 79b1824..ed96043 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -811,6 +811,8 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus,
static resource_size_t calculate_iosize(resource_size_t size,
resource_size_t min_size,
resource_size_t size1,
+ resource_size_t add_size,
+ resource_size_t children_add_size,
resource_size_t old_size,
resource_size_t align)
{
@@ -823,15 +825,18 @@ static resource_size_t calculate_iosize(resource_size_t size,
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
size = (size & 0xff) + ((size & ~0xffUL) << 2);
#endif
- size = ALIGN(size + size1, align);
+ size = size + size1;
if (size < old_size)
size = old_size;
+
+ size = ALIGN(max(size, add_size) + children_add_size, align);
return size;
}
static resource_size_t calculate_memsize(resource_size_t size,
resource_size_t min_size,
- resource_size_t size1,
+ resource_size_t add_size,
+ resource_size_t children_add_size,
resource_size_t old_size,
resource_size_t align)
{
@@ -841,7 +846,8 @@ static resource_size_t calculate_memsize(resource_size_t size,
old_size = 0;
if (size < old_size)
size = old_size;
- size = ALIGN(size + size1, align);
+
+ size = ALIGN(max(size, add_size) + children_add_size, align);
return size;
}
@@ -930,12 +936,10 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
}
}
- size0 = calculate_iosize(size, min_size, size1,
+ size0 = calculate_iosize(size, min_size, size1, 0, 0,
resource_size(b_res), min_align);
- if (children_add_size > add_size)
- add_size = children_add_size;
- size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
- calculate_iosize(size, min_size, add_size + size1,
+ size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
+ calculate_iosize(size, min_size, size1, add_size, children_add_size,
resource_size(b_res), min_align);
if (!size0 && !size1) {
if (b_res->start || b_res->end)
@@ -1079,12 +1083,10 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
min_align = calculate_mem_align(aligns, max_order);
min_align = max(min_align, window_alignment(bus, b_res->flags));
- size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
+ size0 = calculate_memsize(size, min_size, 0, 0, resource_size(b_res), min_align);
add_align = max(min_align, add_align);
- if (children_add_size > add_size)
- add_size = children_add_size;
- size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
- calculate_memsize(size, min_size, add_size,
+ size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
+ calculate_memsize(size, min_size, add_size, children_add_size,
resource_size(b_res), add_align);
if (!size0 && !size1) {
if (b_res->start || b_res->end)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] PCI: Equalize hotplug memory and io for non/occupied slots
2018-09-25 18:39 [PATCH v3] PCI: Equalize hotplug memory and io for non/occupied slots Jon Derrick
@ 2018-09-26 22:23 ` Bjorn Helgaas
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Helgaas @ 2018-09-26 22:23 UTC (permalink / raw)
To: Jon Derrick
Cc: linux-pci, linux-kernel, Lorenzo Pieralisi, Sinan Kaya,
Christoph Hellwig, Keith Busch, Matthew Wilcox, Logan Gunthorpe,
Mika Westerberg
On Tue, Sep 25, 2018 at 12:39:06PM -0600, Jon Derrick wrote:
> Currently, a hotplug bridge will be given hpmemsize additional memory
> and hpiosize additional io if available, in order to satisfy any future
> hotplug allocation requirements.
>
> These calculations don't consider the current memory/io size of the
> hotplug bridge/slot, so hotplug bridges/slots which have downstream
> devices will be allocated their current allocation in addition to the
> hpmemsize value.
>
> This makes for possibly undesirable results with a mix of unoccupied and
> occupied slots (ex, with hpmemsize=2M):
>
> 02:03.0 PCI bridge: <-- Occupied
> Memory behind bridge: d6200000-d64fffff [size=3M]
> 02:04.0 PCI bridge: <-- Unoccupied
> Memory behind bridge: d6500000-d66fffff [size=2M]
>
> This change considers the current allocation size when using the
> hpmemsize/hpiosize parameters to make the reservations predictable for
> the mix of unoccupied and occupied slots:
>
> 02:03.0 PCI bridge: <-- Occupied
> Memory behind bridge: d6200000-d63fffff [size=2M]
> 02:04.0 PCI bridge: <-- Unoccupied
> Memory behind bridge: d6400000-d65fffff [size=2M]
>
> Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Applied to pci/hotplug for v4.20, thanks!
> ---
> v2->v3: Made the IO and mem size calculations nearly equivalent
>
> drivers/pci/setup-bus.c | 28 +++++++++++++++-------------
> 1 file changed, 15 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> index 79b1824..ed96043 100644
> --- a/drivers/pci/setup-bus.c
> +++ b/drivers/pci/setup-bus.c
> @@ -811,6 +811,8 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus,
> static resource_size_t calculate_iosize(resource_size_t size,
> resource_size_t min_size,
> resource_size_t size1,
> + resource_size_t add_size,
> + resource_size_t children_add_size,
> resource_size_t old_size,
> resource_size_t align)
> {
> @@ -823,15 +825,18 @@ static resource_size_t calculate_iosize(resource_size_t size,
> #if defined(CONFIG_ISA) || defined(CONFIG_EISA)
> size = (size & 0xff) + ((size & ~0xffUL) << 2);
> #endif
> - size = ALIGN(size + size1, align);
> + size = size + size1;
> if (size < old_size)
> size = old_size;
> +
> + size = ALIGN(max(size, add_size) + children_add_size, align);
> return size;
> }
>
> static resource_size_t calculate_memsize(resource_size_t size,
> resource_size_t min_size,
> - resource_size_t size1,
> + resource_size_t add_size,
> + resource_size_t children_add_size,
> resource_size_t old_size,
> resource_size_t align)
> {
> @@ -841,7 +846,8 @@ static resource_size_t calculate_memsize(resource_size_t size,
> old_size = 0;
> if (size < old_size)
> size = old_size;
> - size = ALIGN(size + size1, align);
> +
> + size = ALIGN(max(size, add_size) + children_add_size, align);
> return size;
> }
>
> @@ -930,12 +936,10 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
> }
> }
>
> - size0 = calculate_iosize(size, min_size, size1,
> + size0 = calculate_iosize(size, min_size, size1, 0, 0,
> resource_size(b_res), min_align);
> - if (children_add_size > add_size)
> - add_size = children_add_size;
> - size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
> - calculate_iosize(size, min_size, add_size + size1,
> + size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
> + calculate_iosize(size, min_size, size1, add_size, children_add_size,
> resource_size(b_res), min_align);
> if (!size0 && !size1) {
> if (b_res->start || b_res->end)
> @@ -1079,12 +1083,10 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
>
> min_align = calculate_mem_align(aligns, max_order);
> min_align = max(min_align, window_alignment(bus, b_res->flags));
> - size0 = calculate_memsize(size, min_size, 0, resource_size(b_res), min_align);
> + size0 = calculate_memsize(size, min_size, 0, 0, resource_size(b_res), min_align);
> add_align = max(min_align, add_align);
> - if (children_add_size > add_size)
> - add_size = children_add_size;
> - size1 = (!realloc_head || (realloc_head && !add_size)) ? size0 :
> - calculate_memsize(size, min_size, add_size,
> + size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
> + calculate_memsize(size, min_size, add_size, children_add_size,
> resource_size(b_res), add_align);
> if (!size0 && !size1) {
> if (b_res->start || b_res->end)
> --
> 1.8.3.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-09-26 22:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-25 18:39 [PATCH v3] PCI: Equalize hotplug memory and io for non/occupied slots Jon Derrick
2018-09-26 22:23 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).