[PATCH V3 0/3] Add i.MX6ULZ SoC support

[PATCH V3 0/3] Add i.MX6ULZ SoC support

[Anson Huang]

This patch set adds i.MX6ULZ SoC support, i.MX6ULZ is a new SoC of
i.MX6 family, compared to i.MX6ULL, it removes below modules:

    - UART5/UART6/UART7/UART8;
    - PWM5/PWM6/PWM7/PWM8;
    - eCSPI3/eCSPI4;
    - CAN1/CAN2;
    - FEC1/FEC2;
    - I2C3/I2C4;
    - EPIT2;
    - LCDIF;
    - GPT2;
    - TSC;

And i.MX6ULZ has same soc_id as i.MX6ULL, but SRC_SBMR2 bit[6] is
to differentiate i.MX6ULZ from i.MX6ULL, 1'b1 means i.MX6ULZ and
1'b0 means i.MX6ULL. i.MX6ULZ reuse most of i.MX6UL/i.MX6ULL code,
just add the new CPU type and remove those non-exist modules from dtb.

Anson Huang (3):
  ARM: imx: add i.mx6ulz msl support
  dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
  ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support

 Documentation/devicetree/bindings/arm/fsl.txt |  4 +++
 arch/arm/boot/dts/Makefile                    |  3 ++-
 arch/arm/boot/dts/imx6ulz-14x14-evk.dts       | 20 ++++++++++++++
 arch/arm/boot/dts/imx6ulz.dtsi                | 38 +++++++++++++++++++++++++++
 arch/arm/mach-imx/anatop.c                    | 20 ++++++++++++++
 arch/arm/mach-imx/cpu.c                       |  3 +++
 arch/arm/mach-imx/mxc.h                       |  7 +++++
 arch/arm/mach-imx/pm-imx6.c                   |  4 +--
 8 files changed, 96 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6ulz-14x14-evk.dts
 create mode 100644 arch/arm/boot/dts/imx6ulz.dtsi

-- 
2.7.4

[PATCH V3 1/3] ARM: imx: add i.mx6ulz msl support

[Anson Huang]

The i.MX 6ULZ processor is a high-performance, ultra
cost-efficient consumer Linux processor featuring an
advanced implementation of a single Arm® Cortex®-A7 core,
which operates at speeds up to 900 MHz.

This patch adds basic MSL support for i.MX6ULZ, the
i.MX6ULZ has same soc_id as i.MX6ULL, and SRC_SBMR2 bit[6]
is to differentiate i.MX6ULZ from i.MX6ULL, 1'b1 means
i.MX6ULZ and 1'b0 means i.MX6ULL.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
	remove "fsl,imx6ulz" on kernel side and add "fsl,imx6ull" into DT machine compatible
	to save code change on kernel side, as well as clock driver.
 arch/arm/mach-imx/anatop.c  | 20 ++++++++++++++++++++
 arch/arm/mach-imx/cpu.c     |  3 +++
 arch/arm/mach-imx/mxc.h     |  7 +++++++
 arch/arm/mach-imx/pm-imx6.c |  4 ++--
 4 files changed, 32 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 61f3d94..45d618a 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -31,6 +31,8 @@
 #define ANADIG_DIGPROG_IMX6SL	0x280
 #define ANADIG_DIGPROG_IMX7D	0x800
 
+#define SRC_SBMR2		0x1c
+
 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG	0x40000
 #define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN	0x8
 #define BM_ANADIG_REG_CORE_FET_ODRIVE		0x20000000
@@ -148,6 +150,24 @@ void __init imx_init_revision_from_anatop(void)
 		major_part = (digprog >> 8) & 0xf;
 		minor_part = digprog & 0xf;
 		revision = ((major_part + 1) << 4) | minor_part;
+
+		if ((digprog >> 16) == MXC_CPU_IMX6ULL) {
+			void __iomem *src_base;
+			u32 sbmr2;
+
+			np = of_find_compatible_node(NULL, NULL,
+						     "fsl,imx6ul-src");
+			src_base = of_iomap(np, 0);
+			WARN_ON(!src_base);
+			sbmr2 = readl_relaxed(src_base + SRC_SBMR2);
+			iounmap(src_base);
+
+			/* src_sbmr2 bit 6 is to identify if it is i.MX6ULZ */
+			if (sbmr2 & (1 << 6)) {
+				digprog &= ~(0xff << 16);
+				digprog |= (MXC_CPU_IMX6ULZ << 16);
+			}
+		}
 	}
 
 	mxc_set_cpu_type(digprog >> 16 & 0xff);
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index c6b1bf9..c73593e 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -136,6 +136,9 @@ struct device * __init imx_soc_device_init(void)
 	case MXC_CPU_IMX6ULL:
 		soc_id = "i.MX6ULL";
 		break;
+	case MXC_CPU_IMX6ULZ:
+		soc_id = "i.MX6ULZ";
+		break;
 	case MXC_CPU_IMX6SLL:
 		soc_id = "i.MX6SLL";
 		break;
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 026e2ca..b130a53 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -40,6 +40,8 @@
 #define MXC_CPU_IMX6Q		0x63
 #define MXC_CPU_IMX6UL		0x64
 #define MXC_CPU_IMX6ULL		0x65
+/* virtual cpu id for i.mx6ulz */
+#define MXC_CPU_IMX6ULZ		0x6b
 #define MXC_CPU_IMX6SLL		0x67
 #define MXC_CPU_IMX7D		0x72
 
@@ -80,6 +82,11 @@ static inline bool cpu_is_imx6ull(void)
 	return __mxc_cpu_type == MXC_CPU_IMX6ULL;
 }
 
+static inline bool cpu_is_imx6ulz(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6ULZ;
+}
+
 static inline bool cpu_is_imx6sll(void)
 {
 	return __mxc_cpu_type == MXC_CPU_IMX6SLL;
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 529f4b5..87f45b9 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -313,7 +313,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
-		    cpu_is_imx6ull() || cpu_is_imx6sll())
+		    cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -331,7 +331,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		if (cpu_is_imx6sl() || cpu_is_imx6sx())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
-		    cpu_is_imx6ull() || cpu_is_imx6sll())
+		    cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
-- 
2.7.4

[PATCH V3 2/3] dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board

[Anson Huang]

This patch adds compatible for i.MX6ULZ 14x14 EVK board.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
	Add "fsl,imx6ull" according to dts change.
 Documentation/devicetree/bindings/arm/fsl.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index 968f238..7b964d8 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -85,6 +85,10 @@ i.MX6 UltraLiteLite 14x14 EVK Board
 Required root node properties:
     - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
 
+i.MX6 ULZ 14x14 EVK Board
+Required root node properties:
+    - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
 i.MX6 SoloX SDB Board
 Required root node properties:
     - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-- 
2.7.4

[PATCH V3 3/3] ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support

[Anson Huang]

i.MX6ULZ is new SoC of i.MX6 family, compared to i.MX6ULL,
it removes below modules:

- UART5/UART6/UART7/UART8;
- PWM5/PWM6/PWM7/PWM8;
- eCSPI3/eCSPI4;
- CAN1/CAN2;
- FEC1/FEC2;
- I2C3/I2C4;
- EPIT2;
- LCDIF;
- GPT2;
- ADC1;
- TSC;

This patch adds support for i.MX6ULZ and i.MX6ULZ 14x14 EVK
board.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
	Add "fsl,imx6ull" to DT compatible.
 arch/arm/boot/dts/Makefile              |  3 ++-
 arch/arm/boot/dts/imx6ulz-14x14-evk.dts | 20 +++++++++++++++++
 arch/arm/boot/dts/imx6ulz.dtsi          | 38 +++++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/imx6ulz-14x14-evk.dts
 create mode 100644 arch/arm/boot/dts/imx6ulz.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b3ec70d..d7268ae 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -560,7 +560,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-mainboard.dtb \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri-eval-v3.dtb \
-	imx6ull-colibri-wifi-eval-v3.dtb
+	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ulz-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/imx6ulz-14x14-evk.dts b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
new file mode 100644
index 0000000..6f1af24
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz-14x14-evk.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+	model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+	compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+	/delete-node/ panel;
+};
diff --git a/arch/arm/boot/dts/imx6ulz.dtsi b/arch/arm/boot/dts/imx6ulz.dtsi
new file mode 100644
index 0000000..ae6d7e5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ ethernet0;
+		/delete-property/ ethernet1;
+		/delete-property/ i2c2;
+		/delete-property/ i2c3;
+		/delete-property/ serial4;
+		/delete-property/ serial5;
+		/delete-property/ serial6;
+		/delete-property/ serial7;
+		/delete-property/ spi2;
+		/delete-property/ spi3;
+	};
+};
+
+/delete-node/ &adc1;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
-- 
2.7.4

Re: [PATCH V3 0/3] Add i.MX6ULZ SoC support

[Shawn Guo]

On Sun, Sep 30, 2018 at 11:32:25AM +0800, Anson Huang wrote:
> This patch set adds i.MX6ULZ SoC support, i.MX6ULZ is a new SoC of
> i.MX6 family, compared to i.MX6ULL, it removes below modules:
> 
>     - UART5/UART6/UART7/UART8;
>     - PWM5/PWM6/PWM7/PWM8;
>     - eCSPI3/eCSPI4;
>     - CAN1/CAN2;
>     - FEC1/FEC2;
>     - I2C3/I2C4;
>     - EPIT2;
>     - LCDIF;
>     - GPT2;
>     - TSC;
> 
> And i.MX6ULZ has same soc_id as i.MX6ULL, but SRC_SBMR2 bit[6] is
> to differentiate i.MX6ULZ from i.MX6ULL, 1'b1 means i.MX6ULZ and
> 1'b0 means i.MX6ULL. i.MX6ULZ reuse most of i.MX6UL/i.MX6ULL code,
> just add the new CPU type and remove those non-exist modules from dtb.
> 
> Anson Huang (3):
>   ARM: imx: add i.mx6ulz msl support
>   dt-bindings: arm: add compatible for i.MX6ULZ 14x14 EVK board
>   ARM: dts: imx: add i.mx6ulz and i.mx6ulz 14x14 evk support

Applied all, thanks.