From: Stephen Boyd <sboyd@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
Vinod Koul <vkoul@kernel.org>
Cc: Shefali Jain <shefjain@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Vinod Koul <vkoul@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Anu Ramanathan <anur@codeaurora.org>,
Taniya Das <tdas@codeaurora.org>,
"open list:COMMON CLK FRAMEWORK" <linux-clk@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
"open list:ARM/QUALCOMM SUPPORT" <linux-arm-msm@vger.kernel.org>,
"open list:ARM/QUALCOMM SUPPORT" <linux-soc@vger.kernel.org>
Subject: Re: [PATCH 2/2] clk: qcom: gcc: Add global clock controller driver for QCS404
Date: Mon, 01 Oct 2018 10:19:00 -0700 [thread overview]
Message-ID: <153841434099.119890.3912925112860077471@swboyd.mtv.corp.google.com> (raw)
In-Reply-To: <20180921185936.9590-2-vkoul@kernel.org>
Quoting Vinod Koul (2018-09-21 11:59:36)
> From: Shefali Jain <shefjain@codeaurora.org>
>
> Add the clocks supported in global clock controller which clock the
> peripherals like BLSPs, SDCC, USB, MDSS etc. Register all the clocks
> to the clock framework for the clients to be able to request for them.
>
> Signed-off-by: Shefali Jain <shefjain@codeaurora.org>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> Co-developed-by: Taniya Das <tdas@codeaurora.org>
> Signed-off-by: Anu Ramanathan <anur@codeaurora.org>
> [rebase and tidyup for upstream]
Who did the tidying?
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
> - reg : shall contain base register location and length
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 064768699fe7..529d84cc7503 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -235,6 +235,14 @@ config MSM_GCC_8998
> Say Y if you want to use peripheral devices such as UART, SPI,
> i2c, USB, UFS, SD/eMMC, PCIe, etc.
>
> +config QCS_GCC_404
> + tristate "QCS404 Global Clock Controller"
> + depends on COMMON_CLK_QCOM
> + help
> + Support for the global clock controller on QCS404 devices.
> + Say Y if you want to use peripheral devices such as UART, SPI, I2C,
> + USB, SD/eMMC, PCIe, etc.
It seems to include multimedia display clks and ethernet? Maybe include
those too.
> +
> config SDM_GCC_845
> tristate "SDM845 Global Clock Controller"
> select QCOM_GDSC
> diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c
> new file mode 100644
> index 000000000000..6d1387ef798b
> --- /dev/null
> +++ b/drivers/clk/qcom/gcc-qcs404.c
> @@ -0,0 +1,2729 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/clk.h>
Please don't include this.
> +#include <linux/clk-provider.h>
> +#include <linux/regmap.h>
> +#include <linux/reset-controller.h>
> +
> +#include <dt-bindings/clock/qcom,gcc-qcs404.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "clk-branch.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-regmap.h"
> +#include "common.h"
> +#include "reset.h"
[...]
> +
> +/* 930MHz configuration */
> +static const struct alpha_pll_config gpll3_config = {
> + .l = 48,
> + .alpha = 0x0,
> + .alpha_en_mask = BIT(24),
> + .post_div_mask = 0xf << 8,
> + .post_div_val = 0x1 << 8,
> + .vco_mask = 0x3 << 20,
> + .main_output_mask = 0x1,
> + .config_ctl_val = 0x4001055b,
> +};
> +
> +static struct pll_vco gpll3_vco[] = {
const?
> + { 700000000, 1400000000, 0 },
> +};
> +
> +static struct clk_alpha_pll gpll3_out_main = {
> + .offset = 0x22000,
> + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
> + .vco_table = gpll3_vco,
> + .num_vco = ARRAY_SIZE(gpll3_vco),
> + .clkr = {
> + .hw.init = &(struct clk_init_data){
> + .name = "gpll3_out_main",
> + .parent_names = (const char *[]){ "cxo" },
> + .num_parents = 1,
> + .ops = &clk_alpha_pll_ops,
> + },
> + },
> +};
> +
[...]
> +
> +static struct clk_branch gcc_pwm1_xo512_clk = {
> + .halt_reg = 0x49004,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0x49004,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_pwm1_xo512_clk",
> + .ops = &clk_branch2_ops,
Do these pwm clks have a parent clk of the XO?
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_pwm2_xo512_clk = {
> + .halt_reg = 0x4a004,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0x4a004,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_pwm2_xo512_clk",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_qdss_dap_clk = {
[...]
> +
> +static struct clk_regmap *gcc_qcs404_clocks[] = {
> + [APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr,
> + [BLSP1_QUP0_I2C_APPS_CLK_SRC] = &blsp1_qup0_i2c_apps_clk_src.clkr,
> + [BLSP1_QUP0_SPI_APPS_CLK_SRC] = &blsp1_qup0_spi_apps_clk_src.clkr,
> + [BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
> + [BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr,
> + [BLSP1_QUP2_I2C_APPS_CLK_SRC] = &blsp1_qup2_i2c_apps_clk_src.clkr,
> + [BLSP1_QUP2_SPI_APPS_CLK_SRC] = &blsp1_qup2_spi_apps_clk_src.clkr,
> + [BLSP1_QUP3_I2C_APPS_CLK_SRC] = &blsp1_qup3_i2c_apps_clk_src.clkr,
> + [BLSP1_QUP3_SPI_APPS_CLK_SRC] = &blsp1_qup3_spi_apps_clk_src.clkr,
> + [BLSP1_QUP4_I2C_APPS_CLK_SRC] = &blsp1_qup4_i2c_apps_clk_src.clkr,
> + [BLSP1_QUP4_SPI_APPS_CLK_SRC] = &blsp1_qup4_spi_apps_clk_src.clkr,
> + [BLSP1_UART0_APPS_CLK_SRC] = &blsp1_uart0_apps_clk_src.clkr,
> + [BLSP1_UART1_APPS_CLK_SRC] = &blsp1_uart1_apps_clk_src.clkr,
> + [BLSP1_UART2_APPS_CLK_SRC] = &blsp1_uart2_apps_clk_src.clkr,
> + [BLSP1_UART3_APPS_CLK_SRC] = &blsp1_uart3_apps_clk_src.clkr,
> + [BLSP2_QUP0_I2C_APPS_CLK_SRC] = &blsp2_qup0_i2c_apps_clk_src.clkr,
> + [BLSP2_QUP0_SPI_APPS_CLK_SRC] = &blsp2_qup0_spi_apps_clk_src.clkr,
> + [BLSP2_UART0_APPS_CLK_SRC] = &blsp2_uart0_apps_clk_src.clkr,
> + [BYTE0_CLK_SRC] = &byte0_clk_src.clkr,
> + [EMAC_CLK_SRC] = &emac_clk_src.clkr,
> + [EMAC_PTP_CLK_SRC] = &emac_ptp_clk_src.clkr,
> + [ESC0_CLK_SRC] = &esc0_clk_src.clkr,
> + [GCC_APSS_AHB_CLK] = &gcc_apss_ahb_clk.clkr,
> + [GCC_BIMC_GFX_CLK] = &gcc_bimc_gfx_clk.clkr,
> + [GCC_BIMC_MDSS_CLK] = &gcc_bimc_mdss_clk.clkr,
> + [GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
> + [GCC_BLSP1_QUP0_I2C_APPS_CLK] = &gcc_blsp1_qup0_i2c_apps_clk.clkr,
> + [GCC_BLSP1_QUP0_SPI_APPS_CLK] = &gcc_blsp1_qup0_spi_apps_clk.clkr,
> + [GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
> + [GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
> + [GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr,
> + [GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr,
> + [GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr,
> + [GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr,
> + [GCC_BLSP1_QUP4_I2C_APPS_CLK] = &gcc_blsp1_qup4_i2c_apps_clk.clkr,
> + [GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
> + [GCC_BLSP1_UART0_APPS_CLK] = &gcc_blsp1_uart0_apps_clk.clkr,
> + [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
> + [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
> + [GCC_BLSP1_UART3_APPS_CLK] = &gcc_blsp1_uart3_apps_clk.clkr,
> + [GCC_BLSP2_AHB_CLK] = &gcc_blsp2_ahb_clk.clkr,
> + [GCC_BLSP2_QUP0_I2C_APPS_CLK] = &gcc_blsp2_qup0_i2c_apps_clk.clkr,
> + [GCC_BLSP2_QUP0_SPI_APPS_CLK] = &gcc_blsp2_qup0_spi_apps_clk.clkr,
> + [GCC_BLSP2_UART0_APPS_CLK] = &gcc_blsp2_uart0_apps_clk.clkr,
> + [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
> + [GCC_ETH_AXI_CLK] = &gcc_eth_axi_clk.clkr,
> + [GCC_ETH_PTP_CLK] = &gcc_eth_ptp_clk.clkr,
> + [GCC_ETH_RGMII_CLK] = &gcc_eth_rgmii_clk.clkr,
> + [GCC_ETH_SLAVE_AHB_CLK] = &gcc_eth_slave_ahb_clk.clkr,
> + [GCC_GENI_IR_S_CLK] = &gcc_geni_ir_s_clk.clkr,
> + [GCC_GENI_IR_H_CLK] = &gcc_geni_ir_h_clk.clkr,
> + [GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
> + [GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
> + [GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
> + [GCC_MDSS_AHB_CLK] = &gcc_mdss_ahb_clk.clkr,
> + [GCC_MDSS_AXI_CLK] = &gcc_mdss_axi_clk.clkr,
> + [GCC_MDSS_BYTE0_CLK] = &gcc_mdss_byte0_clk.clkr,
> + [GCC_MDSS_ESC0_CLK] = &gcc_mdss_esc0_clk.clkr,
> + [GCC_MDSS_HDMI_APP_CLK] = &gcc_mdss_hdmi_app_clk.clkr,
> + [GCC_MDSS_HDMI_PCLK_CLK] = &gcc_mdss_hdmi_pclk_clk.clkr,
> + [GCC_MDSS_MDP_CLK] = &gcc_mdss_mdp_clk.clkr,
> + [GCC_MDSS_PCLK0_CLK] = &gcc_mdss_pclk0_clk.clkr,
> + [GCC_MDSS_VSYNC_CLK] = &gcc_mdss_vsync_clk.clkr,
> + [GCC_OXILI_AHB_CLK] = &gcc_oxili_ahb_clk.clkr,
> + [GCC_OXILI_GFX3D_CLK] = &gcc_oxili_gfx3d_clk.clkr,
> + [GCC_PCIE_0_AUX_CLK] = &gcc_pcie_0_aux_clk.clkr,
> + [GCC_PCIE_0_CFG_AHB_CLK] = &gcc_pcie_0_cfg_ahb_clk.clkr,
> + [GCC_PCIE_0_MSTR_AXI_CLK] = &gcc_pcie_0_mstr_axi_clk.clkr,
> + [GCC_PCIE_0_PIPE_CLK] = &gcc_pcie_0_pipe_clk.clkr,
> + [GCC_PCIE_0_SLV_AXI_CLK] = &gcc_pcie_0_slv_axi_clk.clkr,
> + [GCC_PCNOC_USB2_CLK] = &gcc_pcnoc_usb2_clk.clkr,
> + [GCC_PCNOC_USB3_CLK] = &gcc_pcnoc_usb3_clk.clkr,
> + [GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr,
> + [GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr,
> + [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
> + [GCC_PWM0_XO512_CLK] = &gcc_pwm0_xo512_clk.clkr,
> + [GCC_PWM1_XO512_CLK] = &gcc_pwm1_xo512_clk.clkr,
> + [GCC_PWM2_XO512_CLK] = &gcc_pwm2_xo512_clk.clkr,
> + [GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr,
> + [GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
> + [GCC_SDCC1_ICE_CORE_CLK] = &gcc_sdcc1_ice_core_clk.clkr,
> + [GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
> + [GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
> + [GCC_SYS_NOC_USB3_CLK] = &gcc_sys_noc_usb3_clk.clkr,
> + [GCC_USB20_MOCK_UTMI_CLK] = &gcc_usb20_mock_utmi_clk.clkr,
> + [GCC_USB2A_PHY_SLEEP_CLK] = &gcc_usb2a_phy_sleep_clk.clkr,
> + [GCC_USB30_MASTER_CLK] = &gcc_usb30_master_clk.clkr,
> + [GCC_USB30_MOCK_UTMI_CLK] = &gcc_usb30_mock_utmi_clk.clkr,
> + [GCC_USB30_SLEEP_CLK] = &gcc_usb30_sleep_clk.clkr,
> + [GCC_USB3_PHY_AUX_CLK] = &gcc_usb3_phy_aux_clk.clkr,
> + [GCC_USB3_PHY_PIPE_CLK] = &gcc_usb3_phy_pipe_clk.clkr,
> + [GCC_USB_HS_PHY_CFG_AHB_CLK] = &gcc_usb_hs_phy_cfg_ahb_clk.clkr,
> + [GCC_USB_HS_SYSTEM_CLK] = &gcc_usb_hs_system_clk.clkr,
> + [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr,
> + [GP1_CLK_SRC] = &gp1_clk_src.clkr,
Why are some of these missing GCC_ prefix?
> + [GP2_CLK_SRC] = &gp2_clk_src.clkr,
> + [GP3_CLK_SRC] = &gp3_clk_src.clkr,
> + [GPLL0_OUT_MAIN] = &gpll0_out_main.clkr,
> + [GPLL0_AO_OUT_MAIN] = &gpll0_ao_out_main.clkr,
> + [GPLL0_SLEEP_CLK_SRC] = &gpll0_sleep_clk_src.clkr,
> + [GPLL1_OUT_MAIN] = &gpll1_out_main.clkr,
> + [GPLL3_OUT_MAIN] = &gpll3_out_main.clkr,
> + [GPLL4_OUT_MAIN] = &gpll4_out_main.clkr,
> + [GPLL6] = &gpll6.clkr,
> + [GPLL6_OUT_AUX] = &gpll6_out_aux,
> + [HDMI_APP_CLK_SRC] = &hdmi_app_clk_src.clkr,
> + [HDMI_PCLK_CLK_SRC] = &hdmi_pclk_clk_src.clkr,
> + [MDP_CLK_SRC] = &mdp_clk_src.clkr,
> + [PCIE_0_AUX_CLK_SRC] = &pcie_0_aux_clk_src.clkr,
> + [PCIE_0_PIPE_CLK_SRC] = &pcie_0_pipe_clk_src.clkr,
> + [PCLK0_CLK_SRC] = &pclk0_clk_src.clkr,
> + [PDM2_CLK_SRC] = &pdm2_clk_src.clkr,
> + [SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr,
> + [SDCC1_ICE_CORE_CLK_SRC] = &sdcc1_ice_core_clk_src.clkr,
> + [SDCC2_APPS_CLK_SRC] = &sdcc2_apps_clk_src.clkr,
> + [USB20_MOCK_UTMI_CLK_SRC] = &usb20_mock_utmi_clk_src.clkr,
> + [USB30_MASTER_CLK_SRC] = &usb30_master_clk_src.clkr,
> + [USB30_MOCK_UTMI_CLK_SRC] = &usb30_mock_utmi_clk_src.clkr,
> + [USB3_PHY_AUX_CLK_SRC] = &usb3_phy_aux_clk_src.clkr,
> + [USB_HS_SYSTEM_CLK_SRC] = &usb_hs_system_clk_src.clkr,
> + [VSYNC_CLK_SRC] = &vsync_clk_src.clkr,
> + [GCC_USB_HS_INACTIVITY_TIMERS_CLK] =
> + &gcc_usb_hs_inactivity_timers_clk.clkr,
> + [GCC_BIMC_GPU_CLK] = &gcc_bimc_gpu_clk.clkr,
> + [GCC_GTCU_AHB_CLK] = &gcc_gtcu_ahb_clk.clkr,
> + [GCC_GFX_TCU_CLK] = &gcc_gfx_tcu_clk.clkr,
> + [GCC_GFX_TBU_CLK] = &gcc_gfx_tbu_clk.clkr,
> + [GCC_SMMU_CFG_CLK] = &gcc_smmu_cfg_clk.clkr,
> + [GCC_APSS_TCU_CLK] = &gcc_apss_tcu_clk.clkr,
> + [GCC_CRYPTO_AHB_CLK] = &gcc_crypto_ahb_clk.clkr,
> + [GCC_CRYPTO_AXI_CLK] = &gcc_crypto_axi_clk.clkr,
> + [GCC_CRYPTO_CLK] = &gcc_crypto_clk.clkr,
> + [GCC_MDP_TBU_CLK] = &gcc_mdp_tbu_clk.clkr,
> + [GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr,
> + [GCC_DCC_CLK] = &gcc_dcc_clk.clkr,
> + [GCC_DCC_XO_CLK] = &gcc_dcc_xo_clk.clkr,
> +};
> +
> +static const struct qcom_reset_map gcc_qcs404_resets[] = {
> + [GCC_GENI_IR_BCR] = {0x0F000},
> + [GCC_USB_HS_BCR] = {0x41000},
> + [GCC_USB2_HS_PHY_ONLY_BCR] = {0x41034},
> + [GCC_QUSB2_PHY_BCR] = {0x4103C},
> + [GCC_USB_HS_PHY_CFG_AHB_BCR] = {0x0000C, 1},
> + [GCC_USB2A_PHY_BCR] = {0x0000C, 0},
> + [GCC_USB3_PHY_BCR] = {0x39004},
> + [GCC_USB_30_BCR] = {0x39000},
> + [GCC_USB3PHY_PHY_BCR] = {0x39008},
> + [GCC_PCIE_0_BCR] = {0x3E000},
> + [GCC_PCIE_0_PHY_BCR] = {0x3E004},
> + [GCC_PCIE_0_LINK_DOWN_BCR] = {0x3E038},
> + [GCC_PCIEPHY_0_PHY_BCR] = {0x3E03C},
> + [GCC_EMAC_BCR] = {0x4E000},
> +};
> +
> +static const struct regmap_config gcc_qcs404_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = 0x7f000,
> + .fast_io = true,
> +};
> +
> +static const struct qcom_cc_desc gcc_qcs404_desc = {
> + .config = &gcc_qcs404_regmap_config,
> + .clks = gcc_qcs404_clocks,
> + .num_clks = ARRAY_SIZE(gcc_qcs404_clocks),
> + .resets = gcc_qcs404_resets,
> + .num_resets = ARRAY_SIZE(gcc_qcs404_resets),
> +};
> +
> +static const struct of_device_id gcc_qcs404_match_table[] = {
> + { .compatible = "qcom,gcc-qcs404" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, gcc_qcs404_match_table);
> +
> +static int gcc_qcs404_probe(struct platform_device *pdev)
> +{
> + struct regmap *regmap;
> + int ret;
> +
> + ret = qcom_cc_register_board_clk(&pdev->dev,
> + "xo_board", "cxo", 19200000);
You shouldn't need to do this. This function is for transitioning DT
that doesn't have the board clk in DT to something the driver wants to
use, in this case "cxo". So you can either register a fixed factor 1/1
clk to do the translation between board and cxo names, or use xo_board
as the parent of things that can take crystal.
> + if (ret)
> + return ret;
> +
> + regmap = qcom_cc_map(pdev, &gcc_qcs404_desc);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + clk_alpha_pll_configure(&gpll3_out_main, regmap, &gpll3_config);
> + clk_set_rate(apss_ahb_clk_src.clkr.hw.clk, 19200000);
use assigned clock rates from DT please.
> + clk_prepare_enable(apss_ahb_clk_src.clkr.hw.clk);
> + clk_prepare_enable(gpll0_ao_out_main.clkr.hw.clk);
And these should be marked as critical clocks.
> +
> + return qcom_cc_really_probe(pdev, &gcc_qcs404_desc, regmap);
> +}
> +
> +static struct platform_driver gcc_qcs404_driver = {
> + .probe = gcc_qcs404_probe,
> + .driver = {
> + .name = "gcc-qcs404",
> + .of_match_table = gcc_qcs404_match_table,
> + },
> +};
> +
> +static int __init gcc_qcs404_init(void)
> +{
> + return platform_driver_register(&gcc_qcs404_driver);
> +}
> +subsys_initcall(gcc_qcs404_init);
> +
> +static void __exit gcc_qcs404_exit(void)
> +{
> + platform_driver_unregister(&gcc_qcs404_driver);
> +}
> +module_exit(gcc_qcs404_exit);
> +
> +MODULE_DESCRIPTION("Qualcomm GCC QCS404 Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/dt-bindings/clock/qcom,gcc-qcs404.h b/include/dt-bindings/clock/qcom,gcc-qcs404.h
> new file mode 100644
> index 000000000000..e2def29e31b3
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,gcc-qcs404.h
> @@ -0,0 +1,166 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_QCS404_H
> +#define _DT_BINDINGS_CLK_QCOM_GCC_QCS404_H
> +
> +#define APSS_AHB_CLK_SRC 0
> +#define BLSP1_QUP0_I2C_APPS_CLK_SRC 1
> +#define BLSP1_QUP0_SPI_APPS_CLK_SRC 2
> +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 3
> +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 4
> +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 5
> +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 6
> +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 7
> +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 8
> +#define BLSP1_QUP4_I2C_APPS_CLK_SRC 9
> +#define BLSP1_QUP4_SPI_APPS_CLK_SRC 10
> +#define BLSP1_UART0_APPS_CLK_SRC 11
> +#define BLSP1_UART1_APPS_CLK_SRC 12
> +#define BLSP1_UART2_APPS_CLK_SRC 13
> +#define BLSP1_UART3_APPS_CLK_SRC 14
> +#define BLSP2_QUP0_I2C_APPS_CLK_SRC 15
> +#define BLSP2_QUP0_SPI_APPS_CLK_SRC 16
> +#define BLSP2_UART0_APPS_CLK_SRC 17
> +#define BYTE0_CLK_SRC 18
> +#define EMAC_CLK_SRC 19
> +#define EMAC_PTP_CLK_SRC 20
> +#define ESC0_CLK_SRC 21
> +#define GCC_APSS_AHB_CLK 22
> +#define GCC_APSS_AXI_CLK 23
> +#define GCC_BIMC_APSS_AXI_CLK 24
> +#define GCC_BIMC_GFX_CLK 25
> +#define GCC_BIMC_MDSS_CLK 26
> +#define GCC_BLSP1_AHB_CLK 27
> +#define GCC_BLSP1_QUP0_I2C_APPS_CLK 28
> +#define GCC_BLSP1_QUP0_SPI_APPS_CLK 29
> +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 30
> +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 31
> +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 32
> +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 33
> +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 34
> +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 35
> +#define GCC_BLSP1_QUP4_I2C_APPS_CLK 36
> +#define GCC_BLSP1_QUP4_SPI_APPS_CLK 37
> +#define GCC_BLSP1_UART0_APPS_CLK 38
> +#define GCC_BLSP1_UART1_APPS_CLK 39
> +#define GCC_BLSP1_UART2_APPS_CLK 40
> +#define GCC_BLSP1_UART3_APPS_CLK 41
> +#define GCC_BLSP2_AHB_CLK 42
> +#define GCC_BLSP2_QUP0_I2C_APPS_CLK 43
> +#define GCC_BLSP2_QUP0_SPI_APPS_CLK 44
> +#define GCC_BLSP2_UART0_APPS_CLK 45
> +#define GCC_BOOT_ROM_AHB_CLK 46
> +#define GCC_DCC_CLK 47
> +#define GCC_GENI_IR_H_CLK 48
> +#define GCC_ETH_AXI_CLK 49
> +#define GCC_ETH_PTP_CLK 50
> +#define GCC_ETH_RGMII_CLK 51
> +#define GCC_ETH_SLAVE_AHB_CLK 52
> +#define GCC_GENI_IR_S_CLK 53
> +#define GCC_GP1_CLK 54
> +#define GCC_GP2_CLK 55
> +#define GCC_GP3_CLK 56
> +#define GCC_MDSS_AHB_CLK 57
> +#define GCC_MDSS_AXI_CLK 58
> +#define GCC_MDSS_BYTE0_CLK 59
> +#define GCC_MDSS_ESC0_CLK 60
> +#define GCC_MDSS_HDMI_APP_CLK 61
> +#define GCC_MDSS_HDMI_PCLK_CLK 62
> +#define GCC_MDSS_MDP_CLK 63
> +#define GCC_MDSS_PCLK0_CLK 64
> +#define GCC_MDSS_VSYNC_CLK 65
> +#define GCC_OXILI_AHB_CLK 66
> +#define GCC_OXILI_GFX3D_CLK 67
> +#define GCC_PCIE_0_AUX_CLK 68
> +#define GCC_PCIE_0_CFG_AHB_CLK 69
> +#define GCC_PCIE_0_MSTR_AXI_CLK 70
> +#define GCC_PCIE_0_PIPE_CLK 71
> +#define GCC_PCIE_0_SLV_AXI_CLK 72
> +#define GCC_PCNOC_USB2_CLK 73
> +#define GCC_PCNOC_USB3_CLK 74
> +#define GCC_PDM2_CLK 75
> +#define GCC_PDM_AHB_CLK 76
> +#define VSYNC_CLK_SRC 77
> +#define GCC_PRNG_AHB_CLK 78
> +#define GCC_PWM0_XO512_CLK 79
> +#define GCC_PWM1_XO512_CLK 80
> +#define GCC_PWM2_XO512_CLK 81
> +#define GCC_SDCC1_AHB_CLK 82
> +#define GCC_SDCC1_APPS_CLK 83
> +#define GCC_SDCC1_ICE_CORE_CLK 84
> +#define GCC_SDCC2_AHB_CLK 85
> +#define GCC_SDCC2_APPS_CLK 86
> +#define GCC_SYS_NOC_USB3_CLK 87
> +#define GCC_USB20_MOCK_UTMI_CLK 88
> +#define GCC_USB2A_PHY_SLEEP_CLK 89
> +#define GCC_USB30_MASTER_CLK 90
> +#define GCC_USB30_MOCK_UTMI_CLK 91
> +#define gcc_usb30_sleep_clk 92
> +#define gcc_usb3_phy_aux_clk 93
> +#define gcc_usb3_phy_pipe_clk 94
> +#define gcc_usb_hs_phy_cfg_ahb_clk 95
> +#define gcc_usb_hs_system_clk 96
> +#define gfx3d_clk_src 97
> +#define gp1_clk_src 98
> +#define gp2_clk_src 99
> +#define gp3_clk_src 100
> +#define gpll0_out_main 101
> +#define gpll1_out_main 102
> +#define gpll3_out_main 103
> +#define gpll4_out_main 104
> +#define hdmi_app_clk_src 105
> +#define hdmi_pclk_clk_src 106
> +#define mdp_clk_src 107
> +#define pcie_0_aux_clk_src 108
> +#define pcie_0_pipe_clk_src 109
> +#define pclk0_clk_src 110
> +#define pdm2_clk_src 111
> +#define sdcc1_apps_clk_src 112
> +#define sdcc1_ice_core_clk_src 113
> +#define sdcc2_apps_clk_src 114
> +#define usb20_mock_utmi_clk_src 115
> +#define usb30_master_clk_src 116
> +#define usb30_mock_utmi_clk_src 117
> +#define usb3_phy_aux_clk_src 118
> +#define usb_hs_system_clk_src 119
> +#define gpll0_ao_clk_src 120
> +#define wcnss_m_clk 121
> +#define gcc_usb_hs_inactivity_timers_clk 122
Please capitalize all these macros.
> +#define GPLL0_AO_OUT_MAIN 123
> +#define GPLL0_SLEEP_CLK_SRC 124
> +#define GPLL6 125
> +#define GPLL6_OUT_AUX 126
> +#define MDSS_MDP_VOTE_CLK 127
> +#define MDSS_ROTATOR_VOTE_CLK 128
> +#define GCC_BIMC_GPU_CLK 129
> +#define GCC_GTCU_AHB_CLK 130
> +#define GCC_GFX_TCU_CLK 131
> +#define GCC_GFX_TBU_CLK 132
> +#define GCC_SMMU_CFG_CLK 133
> +#define GCC_APSS_TCU_CLK 134
> +#define GCC_CRYPTO_AHB_CLK 135
> +#define GCC_CRYPTO_AXI_CLK 136
> +#define GCC_CRYPTO_CLK 137
> +#define GCC_MDP_TBU_CLK 138
> +#define GCC_QDSS_DAP_CLK 139
> +#define GCC_DCC_XO_CLK 140
> +
> +#define GCC_GENI_IR_BCR 0
> +#define GCC_USB_HS_BCR 1
> +#define GCC_USB2_HS_PHY_ONLY_BCR 2
> +#define GCC_QUSB2_PHY_BCR 3
> +#define GCC_USB_HS_PHY_CFG_AHB_BCR 4
> +#define GCC_USB2A_PHY_BCR 5
> +#define GCC_USB3_PHY_BCR 6
> +#define GCC_USB_30_BCR 7
> +#define GCC_USB3PHY_PHY_BCR 8
> +#define GCC_PCIE_0_BCR 9
> +#define GCC_PCIE_0_PHY_BCR 10
> +#define GCC_PCIE_0_LINK_DOWN_BCR 11
> +#define GCC_PCIEPHY_0_PHY_BCR 12
> +#define GCC_EMAC_BCR 13
No GDSCs? Ok.
> +
next prev parent reply other threads:[~2018-10-01 17:19 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 18:59 [PATCH 1/2] clk: qcom: Export clk_alpha_pll_configure() Vinod Koul
2018-09-21 18:59 ` [PATCH 2/2] clk: qcom: gcc: Add global clock controller driver for QCS404 Vinod Koul
2018-10-01 17:19 ` Stephen Boyd [this message]
2018-10-03 6:21 ` Vinod
2018-10-06 17:49 ` Taniya Das
2018-10-07 13:27 ` Vinod
2018-10-08 2:38 ` Stephen Boyd
2018-10-08 3:51 ` Vinod
2018-10-11 7:19 ` Stephen Boyd
2018-10-11 9:32 ` Vinod
2018-10-06 17:58 ` Taniya Das
2018-10-07 13:31 ` Vinod
2018-10-08 6:28 ` Taniya Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=153841434099.119890.3912925112860077471@swboyd.mtv.corp.google.com \
--to=sboyd@kernel.org \
--cc=andy.gross@linaro.org \
--cc=anur@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=shefjain@codeaurora.org \
--cc=tdas@codeaurora.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).