linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <honghui.zhang@mediatek.com>
To: <lorenzo.pieralisi@arm.com>, <bhelgaas@google.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>, <linux-pci@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <ryder.lee@mediatek.com>
Cc: <ulf.hansson@linaro.org>, <marc.zyngier@arm.com>,
	<matthias.bgg@gmail.com>, <devicetree@vger.kernel.org>,
	<yingjoe.chen@mediatek.com>, <eddie.huang@mediatek.com>,
	<honghui.zhang@mediatek.com>, <youlin.pei@mediatek.com>,
	<yt.shen@mediatek.com>, <sean.wang@mediatek.com>
Subject: [PATCH v6 5/9] PCI: mediatek: Move the mtk_pcie_startup_port_v2 function's define after mtk_pcie_setup_irq
Date: Mon, 8 Oct 2018 11:24:44 +0800	[thread overview]
Message-ID: <1538969088-7136-6-git-send-email-honghui.zhang@mediatek.com> (raw)
In-Reply-To: <1538969088-7136-1-git-send-email-honghui.zhang@mediatek.com>

From: Honghui Zhang <honghui.zhang@mediatek.com>

This is a prepare patch to fix enable MSI logic, move the function's
define later to avoid forward declaration of mtk_pcie_enable_msi in
the future. No functional changed.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
---
 drivers/pci/controller/pcie-mediatek.c | 138 ++++++++++++++++-----------------
 1 file changed, 69 insertions(+), 69 deletions(-)

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index ead6005..654a63e 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -392,75 +392,6 @@ static struct pci_ops mtk_pcie_ops_v2 = {
 	.write = mtk_pcie_config_write,
 };
 
-static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
-{
-	struct mtk_pcie *pcie = port->pcie;
-	struct resource *mem = &pcie->mem;
-	const struct mtk_pcie_soc *soc = port->pcie->soc;
-	u32 val;
-	size_t size;
-	int err;
-
-	/* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
-	if (pcie->base) {
-		val = readl(pcie->base + PCIE_SYS_CFG_V2);
-		val |= PCIE_CSR_LTSSM_EN(port->slot) |
-		       PCIE_CSR_ASPM_L1_EN(port->slot);
-		writel(val, pcie->base + PCIE_SYS_CFG_V2);
-	}
-
-	/* Assert all reset signals */
-	writel(0, port->base + PCIE_RST_CTRL);
-
-	/*
-	 * Enable PCIe link down reset, if link status changed from link up to
-	 * link down, this will reset MAC control registers and configuration
-	 * space.
-	 */
-	writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
-
-	/* De-assert PHY, PE, PIPE, MAC and configuration reset	*/
-	val = readl(port->base + PCIE_RST_CTRL);
-	val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
-	       PCIE_MAC_SRSTB | PCIE_CRSTB;
-	writel(val, port->base + PCIE_RST_CTRL);
-
-	/* Set up vendor ID and class code */
-	if (soc->need_fix_class_id) {
-		val = PCI_VENDOR_ID_MEDIATEK;
-		writew(val, port->base + PCIE_CONF_VEND_ID);
-
-		val = PCI_CLASS_BRIDGE_PCI;
-		writew(val, port->base + PCIE_CONF_CLASS_ID);
-	}
-
-	/* 100ms timeout value should be enough for Gen1/2 training */
-	err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
-				 !!(val & PCIE_PORT_LINKUP_V2), 20,
-				 100 * USEC_PER_MSEC);
-	if (err)
-		return -ETIMEDOUT;
-
-	/* Set INTx mask */
-	val = readl(port->base + PCIE_INT_MASK);
-	val &= ~INTX_MASK;
-	writel(val, port->base + PCIE_INT_MASK);
-
-	/* Set AHB to PCIe translation windows */
-	size = mem->end - mem->start;
-	val = lower_32_bits(mem->start) | AHB2PCIE_SIZE(fls(size));
-	writel(val, port->base + PCIE_AHB_TRANS_BASE0_L);
-
-	val = upper_32_bits(mem->start);
-	writel(val, port->base + PCIE_AHB_TRANS_BASE0_H);
-
-	/* Set PCIe to AXI translation memory space.*/
-	val = fls(0xffffffff) | WIN_ENABLE;
-	writel(val, port->base + PCIE_AXI_WINDOW0);
-
-	return 0;
-}
-
 static void mtk_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 {
 	struct mtk_pcie_port *port = irq_data_get_irq_chip_data(data);
@@ -705,6 +636,75 @@ static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
 	return 0;
 }
 
+static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
+{
+	struct mtk_pcie *pcie = port->pcie;
+	struct resource *mem = &pcie->mem;
+	const struct mtk_pcie_soc *soc = port->pcie->soc;
+	u32 val;
+	size_t size;
+	int err;
+
+	/* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */
+	if (pcie->base) {
+		val = readl(pcie->base + PCIE_SYS_CFG_V2);
+		val |= PCIE_CSR_LTSSM_EN(port->slot) |
+		       PCIE_CSR_ASPM_L1_EN(port->slot);
+		writel(val, pcie->base + PCIE_SYS_CFG_V2);
+	}
+
+	/* Assert all reset signals */
+	writel(0, port->base + PCIE_RST_CTRL);
+
+	/*
+	 * Enable PCIe link down reset, if link status changed from link up to
+	 * link down, this will reset MAC control registers and configuration
+	 * space.
+	 */
+	writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
+
+	/* De-assert PHY, PE, PIPE, MAC and configuration reset	*/
+	val = readl(port->base + PCIE_RST_CTRL);
+	val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |
+	       PCIE_MAC_SRSTB | PCIE_CRSTB;
+	writel(val, port->base + PCIE_RST_CTRL);
+
+	/* Set up vendor ID and class code */
+	if (soc->need_fix_class_id) {
+		val = PCI_VENDOR_ID_MEDIATEK;
+		writew(val, port->base + PCIE_CONF_VEND_ID);
+
+		val = PCI_CLASS_BRIDGE_PCI;
+		writew(val, port->base + PCIE_CONF_CLASS_ID);
+	}
+
+	/* 100ms timeout value should be enough for Gen1/2 training */
+	err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
+				 !!(val & PCIE_PORT_LINKUP_V2), 20,
+				 100 * USEC_PER_MSEC);
+	if (err)
+		return -ETIMEDOUT;
+
+	/* Set INTx mask */
+	val = readl(port->base + PCIE_INT_MASK);
+	val &= ~INTX_MASK;
+	writel(val, port->base + PCIE_INT_MASK);
+
+	/* Set AHB to PCIe translation windows */
+	size = mem->end - mem->start;
+	val = lower_32_bits(mem->start) | AHB2PCIE_SIZE(fls(size));
+	writel(val, port->base + PCIE_AHB_TRANS_BASE0_L);
+
+	val = upper_32_bits(mem->start);
+	writel(val, port->base + PCIE_AHB_TRANS_BASE0_H);
+
+	/* Set PCIe to AXI translation memory space.*/
+	val = fls(0xffffffff) | WIN_ENABLE;
+	writel(val, port->base + PCIE_AXI_WINDOW0);
+
+	return 0;
+}
+
 static void __iomem *mtk_pcie_map_bus(struct pci_bus *bus,
 				      unsigned int devfn, int where)
 {
-- 
2.6.4


  parent reply	other threads:[~2018-10-08  3:25 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-08  3:24 [PATCH v6 0/9] PCI: mediatek: fixup find_port, enable_msi and add pm, module support honghui.zhang
2018-10-08  3:24 ` [PATCH v6 1/9] PCI: mediatek: Using slot's devfn for compare to fix mtk_pcie_find_port logic honghui.zhang
2018-10-08  3:24 ` [PATCH v6 2/9] PCI: mediatek: Fixup class ID for MT7622 as PCI_CLASS_BRIDGE_PCI honghui.zhang
2018-10-08 17:23   ` Lorenzo Pieralisi
2018-10-09  3:08     ` Honghui Zhang
2018-10-11 11:38       ` Lorenzo Pieralisi
2018-10-12  8:01         ` Honghui Zhang
2018-10-12 10:22           ` Lorenzo Pieralisi
2018-10-12 14:12             ` Bjorn Helgaas
2018-10-15  2:42               ` Honghui Zhang
2018-10-15 18:34                 ` Bjorn Helgaas
2018-10-15  2:04             ` Honghui Zhang
2018-10-08  3:24 ` [PATCH v6 3/9] PCI: mediatek: Remove the redundant dev->pm_domain check honghui.zhang
2018-10-08  3:24 ` [PATCH v6 4/9] PCI: mediatek: Convert to use pci_host_probe() honghui.zhang
2018-10-08  3:24 ` honghui.zhang [this message]
2018-10-08  3:24 ` [PATCH v6 6/9] PCI: mediatek: Fixup enable msi logic by enable msi after clock enabled honghui.zhang
2018-10-08  3:24 ` [PATCH v6 7/9] PCI: mediatek: Add system pm support for MT2712 and MT7622 honghui.zhang
2018-10-08  3:24 ` [PATCH v6 8/9] PCI: mediatek: Save the GIC IRQ in mtk_pcie_port honghui.zhang
2018-10-08  3:24 ` [PATCH v6 9/9] PCI: mediatek: Add loadable kernel module support honghui.zhang
2018-10-08 17:31 ` [PATCH v6 0/9] PCI: mediatek: fixup find_port, enable_msi and add pm, " Bjorn Helgaas
2018-10-09  1:44   ` Honghui Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1538969088-7136-6-git-send-email-honghui.zhang@mediatek.com \
    --to=honghui.zhang@mediatek.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eddie.huang@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=marc.zyngier@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=ryder.lee@mediatek.com \
    --cc=sean.wang@mediatek.com \
    --cc=ulf.hansson@linaro.org \
    --cc=yingjoe.chen@mediatek.com \
    --cc=youlin.pei@mediatek.com \
    --cc=yt.shen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).